+ CC1120_PREAMBLE_CFG1, ((CC1120_PREAMBLE_CFG1_NUM_PREAMBLE_NONE << CC1120_PREAMBLE_CFG1_NUM_PREAMBLE) |
+ (CC1120_PREAMBLE_CFG1_PREAMBLE_WORD_AA << CC1120_PREAMBLE_CFG1_PREAMBLE_WORD)),
+ CC1120_PA_CFG0, 0x7e,
+};
+
+/*
+ * APRS deviation is 3kHz
+ *
+ * fdev = fosc >> 24 * (256 + dev_m) << dev_e
+ *
+ * 32e6Hz / (2 ** 24) * (256 + 137) * (2 ** 2) = 2998Hz
+ */
+
+#define APRS_DEV_E 2
+#define APRS_DEV_M 137
+
+/*
+ * For our APRS beacon, set the symbol rate to 9.6kBaud (8x oversampling for 1200 baud data rate)
+ *
+ * (2**20 + DATARATE_M) * 2 ** DATARATE_E
+ * Rdata = -------------------------------------- * fosc
+ * 2 ** 39
+ *
+ * DATARATE_M = 239914
+ * DATARATE_E = 7
+ *
+ * Rdata = 9599.998593330383301
+ *
+ */
+#define APRS_DRATE_E 7
+#define APRS_DRATE_M 239914
+
+static const uint16_t aprs_setup[] = {
+ CC1120_DEVIATION_M, APRS_DEV_M,
+ CC1120_MODCFG_DEV_E, ((CC1120_MODCFG_DEV_E_MODEM_MODE_NORMAL << CC1120_MODCFG_DEV_E_MODEM_MODE) |
+ (CC1120_MODCFG_DEV_E_MOD_FORMAT_2_GFSK << CC1120_MODCFG_DEV_E_MOD_FORMAT) |
+ (APRS_DEV_E << CC1120_MODCFG_DEV_E_DEV_E)),
+ CC1120_DRATE2, ((APRS_DRATE_E << CC1120_DRATE2_DATARATE_E) |
+ (((APRS_DRATE_M >> 16) & CC1120_DRATE2_DATARATE_M_19_16_MASK) << CC1120_DRATE2_DATARATE_M_19_16)),
+ CC1120_DRATE1, ((APRS_DRATE_M >> 8) & 0xff),
+ CC1120_DRATE0, ((APRS_DRATE_M >> 0) & 0xff),
+ CC1120_PKT_CFG2, ((CC1120_PKT_CFG2_CCA_MODE_ALWAYS_CLEAR << CC1120_PKT_CFG2_CCA_MODE) |
+ (CC1120_PKT_CFG2_PKT_FORMAT_NORMAL << CC1120_PKT_CFG2_PKT_FORMAT)),
+ CC1120_PKT_CFG1, ((0 << CC1120_PKT_CFG1_WHITE_DATA) |
+ (CC1120_PKT_CFG1_ADDR_CHECK_CFG_NONE << CC1120_PKT_CFG1_ADDR_CHECK_CFG) |
+ (CC1120_PKT_CFG1_CRC_CFG_DISABLED << CC1120_PKT_CFG1_CRC_CFG) |
+ (0 << CC1120_PKT_CFG1_APPEND_STATUS)),
+ CC1120_PREAMBLE_CFG1, ((CC1120_PREAMBLE_CFG1_NUM_PREAMBLE_NONE << CC1120_PREAMBLE_CFG1_NUM_PREAMBLE) |
+ (CC1120_PREAMBLE_CFG1_PREAMBLE_WORD_AA << CC1120_PREAMBLE_CFG1_PREAMBLE_WORD)),
+ CC1120_PA_CFG0, 0x7d,
+ CC1120_FIFO_CFG, ((0 << CC1120_FIFO_CFG_CRC_AUTOFLUSH) |
+ (AO_CC1120_TX_BUFFER << CC1120_FIFO_CFG_FIFO_THR)),
+};
+
+/*
+ * For Test mode, we want an unmodulated carrier. To do that, we
+ * set the deviation to zero and enable a preamble so that the radio
+ * turns on before we send any data
+ */
+
+static const uint16_t test_setup[] = {
+ CC1120_DEVIATION_M, 0,
+ CC1120_MODCFG_DEV_E, ((CC1120_MODCFG_DEV_E_MODEM_MODE_NORMAL << CC1120_MODCFG_DEV_E_MODEM_MODE) |
+ (CC1120_MODCFG_DEV_E_MOD_FORMAT_2_GFSK << CC1120_MODCFG_DEV_E_MOD_FORMAT) |
+ (0 << CC1120_MODCFG_DEV_E_DEV_E)),
+ CC1120_DRATE2, ((APRS_DRATE_E << CC1120_DRATE2_DATARATE_E) |
+ (((APRS_DRATE_M >> 16) & CC1120_DRATE2_DATARATE_M_19_16_MASK) << CC1120_DRATE2_DATARATE_M_19_16)),
+ CC1120_DRATE1, ((APRS_DRATE_M >> 8) & 0xff),
+ CC1120_DRATE0, ((APRS_DRATE_M >> 0) & 0xff),
+ CC1120_PKT_CFG2, ((CC1120_PKT_CFG2_CCA_MODE_ALWAYS_CLEAR << CC1120_PKT_CFG2_CCA_MODE) |
+ (CC1120_PKT_CFG2_PKT_FORMAT_NORMAL << CC1120_PKT_CFG2_PKT_FORMAT)),
+ CC1120_PKT_CFG1, ((0 << CC1120_PKT_CFG1_WHITE_DATA) |
+ (CC1120_PKT_CFG1_ADDR_CHECK_CFG_NONE << CC1120_PKT_CFG1_ADDR_CHECK_CFG) |
+ (CC1120_PKT_CFG1_CRC_CFG_DISABLED << CC1120_PKT_CFG1_CRC_CFG) |
+ (0 << CC1120_PKT_CFG1_APPEND_STATUS)),
+ CC1120_PREAMBLE_CFG1, ((CC1120_PREAMBLE_CFG1_NUM_PREAMBLE_4_BYTES << CC1120_PREAMBLE_CFG1_NUM_PREAMBLE) |
+ (CC1120_PREAMBLE_CFG1_PREAMBLE_WORD_AA << CC1120_PREAMBLE_CFG1_PREAMBLE_WORD)),