+\family typewriter
+.c.o:
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcc -S -V -mpic14 -p16F877 $<
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+mpasmwin /q /o $*.asm
+\newline
+
+\newline
+$(PRJ).hex: $(OBJS)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+mplink /v $(PRJ).lkr /m $(PRJ).map /o $(PRJ).hex $(OBJS) libsdcc.lib
+\layout Standard
+
+Please note that indentations within a
+\family typewriter
+ Makefile
+\family default
+ have to be done with a tabulator character.
+\layout Subsection
+
+Command-line options
+\layout Standard
+
+Besides the switches common to all SDCC backends, the PIC14 port accepts
+ the following options (for an updated list see sdcc -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-help):
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug-extra
+\begin_inset LatexCommand \index{PIC14!Options!-\/-debug-extra}
+
+\end_inset
+
+ emit debug info in assembly output
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-pcode-opt
+\begin_inset LatexCommand \index{PIC14!Options!-\/-no-pcode-opt}
+
+\end_inset
+
+ disable (slightly faulty) optimization on pCode
+\layout Subsection
+
+The library
+\layout Subsubsection
+
+error: missing definition for symbol
+\begin_inset Quotes sld
+\end_inset
+
+__gptrget1
+\begin_inset Quotes srd
+\end_inset
+
+
+\layout Standard
+
+The PIC14 port uses library routines to provide more complex operations
+ like multiplication, division/modulus and (generic) pointer dereferencing.
+ In order to add these routines to your project, you must link with PIC14's
+
+\family typewriter
+libsdcc.lib
+\family default
+.
+ For single source file projects this is done automatically, more complex
+ projects must add
+\family typewriter
+libsdcc.lib
+\family default
+ to the linker's arguments.
+ Make sure you also add an include path for the library (using the -I switch
+ to the linker)!
+\layout Subsubsection
+
+Processor mismatch in file
+\begin_inset Quotes sld
+\end_inset
+
+XXX
+\begin_inset Quotes srd
+\end_inset
+
+.
+\layout Standard
+
+This warning can usually be ignored due to the very good compatibility amongst
+ 14 bit PIC
+\begin_inset LatexCommand \index{PIC14}
+
+\end_inset
+
+ devices.
+\layout Standard
+
+You might also consider recompiling the library for your specific device
+ by changing the ARCH=p16f877 (default target) entry in
+\family typewriter
+device/lib/pic/Makefile.in
+\family default
+ and
+\family typewriter
+device/lib/pic/Makefile
+\family default
+ to reflect your device.
+ This might even improve performance for smaller devices as unneccesary
+ BANKSELs migth be removed.
+\layout Subsection
+
+Known bugs
+\layout Subsubsection
+
+initialized data
+\layout Standard
+
+Currently, data can only be initialized if it resides in the source file
+ together with
+\emph on
+main()
+\emph default
+.
+ Data in other source files will silently
+\series bold
+not
+\series default
+ be initialized.
+\family typewriter
+\size footnotesize
+
+\begin_inset Marginal
+collapsed true
+
+\layout Standard
+
+
+\series bold
+\SpecialChar ~
+!
+\end_inset
+
+
+\layout Section
+\pagebreak_top
+The PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port
+\layout Standard
+
+The PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port is the portion of SDCC that is responsible to produce code for the
+ Microchip
+\begin_inset LatexCommand \index{Microchip}
+
+\end_inset
+
+(TM) microcontrollers with 16 bit core.
+ Currently this family of microcontrollers contains the PIC18Fxxx and PIC18Fxxxx.
+ Currently supported devices are:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="6">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F242
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F248
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F252
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F258
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F442
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F448
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F452
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F458
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F1220
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F2220
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F2550
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F4331
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F4455
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6520
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6620
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6680
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6720
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8520
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8620
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8680
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8720
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Global Options
+\layout Standard
+
+PIC16 port supports the standard command line arguments as supposed, with
+ the exception of certain cases that will be mentioned in the following
+ list:
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-callee-saves
+\begin_inset LatexCommand \index{PIC16!Options!-\/-callee-saves}
+
+\end_inset
+
+ See -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-all-callee-saves
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-all-callee-saves
+\begin_inset LatexCommand \index{PIC16!Options!-\/-all-callee-saves}
+
+\end_inset
+
+ All function arguments are passed on stack by default.
+
+\emph on
+There is no need to specify this in the command line.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-fommit-frame-pointer
+\begin_inset LatexCommand \index{PIC16!Options!-\/-fommit-frame-pointer}
+
+\end_inset
+
+ Frame pointer will be omitted when the function uses no local variables.
+\layout Subsection
+
+Port Specific Options
+\begin_inset LatexCommand \index{Options PIC16}
+
+\end_inset
+
+
+\layout Standard
+
+The port specific options appear after the global options in the sdcc --help
+ output.
+\layout Subsubsection
+
+General Options
+\layout Standard
+
+General options enable certain port features and optimizations.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-model=[model] Used in conjuction with the command above.
+ Defines the stack model to be used, valid stack models are :
+\begin_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\emph on
+small
+\emph default
+ Selects small stack model.
+ 8 bit stack and frame pointers.
+ Supports 256 bytes stack size.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\emph on
+large
+\emph default
+ Selects large stack model.
+ 16 bit stack and frame pointers.
+ Supports 65536 bytes stack size.
+\end_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-preplace-udata-with=[kword] Replaces the default udata keyword for allocating
+ unitialized data variables with [kword].
+ Valid keywords are: "udata_acs", "udata_shr", "udata_ovr".
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-ivt-loc <nnnn> positions the Interrupt Vector Table at location <nnnn>.
+ Useful for bootloaders.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-asm= sets the full path and name of an external assembler to call.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-link= sets the full path and name of an external linker to call.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-mplab-comp MPLAB
+\begin_inset LatexCommand \index{PIC16!MPLAB}
+
+\end_inset
+
+ compatibility option.
+ Currently only suppresses special gpasm directives.
+\layout Subsubsection
+
+Optimization Options
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-optimize-goto Try to use (conditional) BRA instead of GOTO
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-optimize-cmp Try to optimize some compares.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-optimize-df Analyze the dataflow of the generated code and improve it.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-obanksel=nn Set optimization level for inserting BANKSELs.
+\newline
+
+\begin_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+0 no optimization
+\layout List
+\labelwidthstring 00.00.0000
+
+1 checks previous used register and if it is the same then does not emit
+ BANKSEL, accounts only for labels.
+\layout List
+\labelwidthstring 00.00.0000
+
+2 tries to check the location of (even different) symbols and removes BANKSELs
+ if they are in the same bank.
+
+\newline
+
+\emph on
+Important: There might be problems if the linker script has data sections
+ across bank borders!
+\end_deeper
+\layout Subsubsection
+
+Linking Options
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-nodefaultlibs do not link default libraries when linking
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-crt Don't link the default run-time modules
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-use-crt= Use a custom run-time module instead of the defaults.
+\layout Subsubsection
+
+Debugging Options
+\layout Standard
+
+Debugging options enable extra debugging information in the output files.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug-xtra Similar to -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+, but dumps more information.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug-ralloc Force register allocator to dump <source>.d file with debugging
+ information.
+ <source> is the name of the file compiled.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-pcode-verbose Enable pcode debugging information in translation.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-denable-peeps Force the usage of peepholes.
+ Use with care.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-gstack Trace push/pops for stack pointer overflow
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-call-tree dump call tree in .calltree file
+\layout Subsection
+
+Enviromental Variables
+\layout Standard
+
+There is a number of enviromental variables that can be used when running
+ SDCC to enable certain optimizations or force a specific program behaviour.
+ these variables are primarily for debugging purposes so they can be enabled/dis
+abled at will.
+\layout Standard
+
+Currently there is only two such variables available:
+\layout List
+\labelwidthstring 00.00.0000
+
+OPTIMIZE_BITFIELD_POINTER_GET when this variable exists reading of structure
+ bitfields is optimized by directly loading FSR0 with the address of the
+ bitfield structure.
+ Normally SDCC will cast the bitfield structure to a bitfield pointer and
+ then load FSR0.
+ This step saves data ram and code space for functions that perform heavy
+ use of bitfields.
+ (ie.
+ 80 bytes of code space are saved when compiling malloc.c with this option).
+
+\layout List
+\labelwidthstring 00.00.0000
+
+NO_REG_OPT do not perform pCode registers optimization.
+ This should be used for debugging purposes.
+ In some where bugs in the pcode optimizer are found, users can benefit
+ from temporarily disabling the optimizer until the bug is fixed.
+\layout Subsection
+
+Preprocessor Macros
+\layout Standard
+
+PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port defines the following preprocessor macros while translating a source.
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Macro
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC_pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Port identification
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Port identification (same as above)
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pic18fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification.
+
+\emph on
+xxxx
+\emph default
+ is the microcontrol identification number, i.e.
+ 452, 6620, etc
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_18Fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification (same as above)
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STACK_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the stack model used
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+In addition the following macros are defined when calling assembler:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Macro
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+__18Fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification.
+
+\emph on
+xxxx
+\emph default
+ is the microcontrol identification number, i.e.
+ 452, 6620, etc
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the memory model used for
+ SDCC
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STACK_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the stack model used
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Directories
+\layout Standard
+
+PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port uses the following directories for searching header files and libraries.
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="4">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Directory
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Target
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Command prefix
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/include/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific headers
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Compiler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-I
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/lib/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific libraries
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-L
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Pragmas
+\begin_inset LatexCommand \label{sub:PIC16_Pragmas}
+
+\end_inset
+
+
+\layout Standard
+
+PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port currently supports the following pragmas:
+\layout List
+\labelwidthstring 00.00.0000
+
+stack
+\begin_inset LatexCommand \index{PIC16!Pragmas!\#pragma stack}
+
+\end_inset
+
+ pragma stack
+\begin_inset LatexCommand \index{PIC16!stack}
+
+\end_inset
+
+ forces the code generator to initialize the stack & frame pointers at a
+ specific address.
+ This is an adhoc solution for cases where no STACK directive is available
+ in the linker script or gplink is not instructed to create a stack section.
+\newline
+The stack pragma should be used only once in a project.
+ Multiple pragmas may result in indeterminate behaviour of the program.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+The old format (ie.
+ #pragma stack 0x5ff) is deprecated and will cause the stack pointer to
+ cross page boundaries (or even exceed the available data RAM) and crash
+ the program.
+ Make sure that stack does not cross page boundaries when using the SMALL
+ stack model.
+\end_inset
+
+
+\newline
+The format is as follows:
+\layout LyX-Code
+
+#pragma stack bottom_address [stack_size]
+\layout Standard
+
+
+\emph on
+bottom_address
+\emph default
+ is the lower bound of the stack section.
+ The stack pointer initially will point at address (bottom_address+stack_size-1).
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* initializes stack of 100 bytes at RAM address 0x200 */
+\layout LyX-Code
+
+#pragma stack 0x200 100
+\layout Standard
+
+If the stack_size field is omitted then a stack is created with the default
+ size of 64.
+ This size might be enough for most programs, but its not enough for operations
+ with deep function nesting or excessive stack usage.
+\layout List
+\labelwidthstring 00.00.0000
+
+code
+\begin_inset LatexCommand \index{PIC16!Pragmas!\#pragma code}
+
+\end_inset
+
+ place a function symbol at static FLASH address
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* place function test_func at 0x4000 */
+\layout LyX-Code
+
+#pragma code test_func 0x4000
+\layout LyX-Code
+
+\layout List
+\labelwidthstring 00.00.0000
+
+library instructs the linker to use a library module.
+\newline
+Usage:
+\layout LyX-Code
+
+#pragma library module_name
+\layout Standard
+
+
+\emph on
+module_name
+\emph default
+ can be any library or object file (including its path).
+ Note that there are four reserved keywords which have special meaning.
+ These are:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="block" valignment="top" leftline="true" width="20page%">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Keyword
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Module to link
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+ignore
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ignore all library pragmas
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+(none)
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+c
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the C library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libc18f
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+math
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the Math libarary
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libm18f
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+io
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the I/O library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libio18f*
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+debug
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the debug library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libdebug
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+* is the device number, i.e.
+ 452 for PIC18F452 MCU.
+\layout Standard
+
+This feature allows for linking with specific libraries withoug having to
+ explicit name them in the command line.
+ Note that the
+\noun on
+ignore
+\noun default
+ keyword will reject all modules specified by the library pragma.
+\layout List
+\labelwidthstring 00.00.0000
+
+udata pragma udata instructs the compiler to emit code so that linker will
+ place a variable at a specific memory bank
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* places variable foo at bank2 */
+\layout LyX-Code
+
+#pragma udata bank2 foo
+\layout LyX-Code
+
+char foo;
+\layout Standard
+
+In order for this pragma to work extra SECTION directives should be added
+ in the .lkr script.
+ In the following example a sample .lkr file is shown:
+\layout LyX-Code
+
+\layout LyX-Code
+
+// Sample linker script for the PIC18F452 processor
+\layout LyX-Code
+
+LIBPATH .
+\layout LyX-Code
+
+CODEPAGE NAME=vectors START=0x0 END=0x29 PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=page START=0x2A END=0x7FFF
+\layout LyX-Code
+
+CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED
+\layout LyX-Code
+
+ACCESSBANK NAME=accessram START=0x0 END=0x7F
+\layout LyX-Code
+
+\layout LyX-Code
+
+DATABANK NAME=gpr0 START=0x80 END=0xFF
+\layout LyX-Code
+
+DATABANK NAME=gpr1 START=0x100 END=0x1FF
+\layout LyX-Code
+
+DATABANK NAME=gpr2 START=0x200 END=0x2FF
+\layout LyX-Code
+
+DATABANK NAME=gpr3 START=0x300 END=0x3FF
+\layout LyX-Code
+
+DATABANK NAME=gpr4 START=0x400 END=0x4FF
+\layout LyX-Code
+
+DATABANK NAME=gpr5 START=0x500 END=0x5FF
+\layout LyX-Code
+
+ACCESSBANK NAME=accesssfr START=0xF80 END=0xFFF PROTECTED
+\layout LyX-Code
+
+\layout LyX-Code
+
+SECTION NAME=CONFIG ROM=config
+\layout LyX-Code
+
+\layout LyX-Code
+
+SECTION NAME=bank0 RAM=gpr0 # these SECTION directives
+\layout LyX-Code
+
+SECTION NAME=bank1 RAM=gpr1 # should be added to link
+\layout LyX-Code
+
+SECTION NAME=bank2 RAM=gpr2 # section name 'bank?' with
+\layout LyX-Code
+
+SECTION NAME=bank3 RAM=gpr3 # a specific DATABANK name
+\layout LyX-Code
+
+SECTION NAME=bank4 RAM=gpr4
+\layout LyX-Code
+
+SECTION NAME=bank5 RAM=gpr5
+\layout Standard
+
+The linker will recognise the section name set in the pragma statement and
+ will position the variable at the memory bank set with the RAM field at
+ the SECTION line in the linker script file.
+\layout Subsection
+
+Header Files
+\begin_inset LatexCommand \label{sub:PIC16_Header-Files}
+
+\end_inset
+
+
+\layout Standard
+
+There is one main header file
+\begin_inset LatexCommand \index{PIC16!Header files}
+
+\end_inset
+
+ that can be included to the source files using the pic16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port.
+ That file is the
+\series bold
+pic18fregs.h
+\series default
+.
+ This header file contains the definitions for the processor special registers,
+ so it is necessary if the source accesses them.
+ It can be included by adding the following line in the beginning of the
+ file:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\layout Standard
+
+The specific microcontroller is selected within the pic18fregs.h automatically,
+ so the same source can be used with a variety of devices.
+\layout Subsection
+
+Libraries
+\layout Standard
+
+The libraries
+\begin_inset LatexCommand \index{PIC16!Libraries}
+
+\end_inset
+
+ that PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port depends on are the microcontroller device libraries which contain
+ the symbol definitions for the microcontroller special function registers.
+ These libraries have the format pic18fxxxx.lib, where
+\emph on
+xxxx
+\emph default
+ is the microcontroller identification number.
+ The specific library is selected automatically by the compiler at link
+ stage according to the selected device.
+\layout Standard
+
+Libraries are created with gplib which is part of the gputils package
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
+
+\end_inset
+
+.
+\layout Subsubsection*
+
+Building the libraries
+\layout Standard
+
+Before using SDCC/pic16 there are some libraries that need to be compiled.
+ This process is not done automatically by SDCC since not all users use
+ SDCC for pic16 projects.
+ So each user should compile the libraries separately.
+\layout Standard
+
+The steps to compile the pic16 libraries under Linux are:
+\layout LyX-Code
+
+cd device/lib/pic16
+\layout LyX-Code
+
+./configure
+\layout LyX-Code
+
+make
+\layout LyX-Code
+
+cd ..
+\layout LyX-Code
+
+make model-pic16
+\layout LyX-Code
+
+su -c 'make install' # install the libraries, you need the root password
+\layout Standard
+
+If you need to install the headers too, do:
+\layout LyX-Code
+
+cd device/include
+\layout LyX-Code
+
+su -c 'make install' # install the headers, you need the root password
+\layout Standard
+
+There exist a special target to build the I/O libraries.
+ This target is not automatically build because it will build the I/O library
+ for
+\emph on
+every
+\emph default
+ supported device.
+ This way building will take quite a lot of time.
+ Users are advised to edit the
+\series bold
+device/lib/pic16/pics.build
+\series default
+ file and then execute:
+\layout LyX-Code
+
+make lib-io
+\layout Subsection
+
+Memory Models
+\layout Standard
+
+The following memory models are supported by the PIC16 port:
+\layout Itemize
+
+small model
+\layout Itemize
+
+large model
+\layout Standard
+
+Memory model affects the default size of pointers within the source.
+ The sizes are shown in the next table:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Pointer sizes according to memory model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+small model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+large model
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+code pointers
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+24-bits
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+data pointers
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+It is advisable that all sources within a project are compiled with the
+ same memory model.
+ If one wants to override the default memory model, this can be done by
+ declaring a pointer as
+\series bold
+far
+\series default
+ or
+\series bold
+near
+\series default
+.
+ Far selects large memory model's pointers, while near selects small memory
+ model's pointers.
+\layout Standard
+
+The standard device libraries (see
+\begin_inset LatexCommand \ref{sub:PIC16_Header-Files}
+
+\end_inset
+
+) contain no reference to pointers, so they can be used with both memory
+ models.
+\layout Subsection
+
+Stack
+\layout Standard
+
+The stack
+\begin_inset LatexCommand \index{PIC16!stack}
+
+\end_inset
+
+ implementation for the PIC16 port uses two indirect registers, FSR1 and
+ FSR2.
+\layout List
+\labelwidthstring 00.00.0000
+
+FSR1 is assigned as stack pointer
+\layout List
+\labelwidthstring 00.00.0000
+
+FSR2 is assigned as frame pointer
+\layout Standard
+
+The following stack models are supported by the PIC16 port
+\layout Itemize
+
+
+\noun on
+small
+\noun default
+ model
+\layout Itemize
+
+
+\noun on
+large
+\noun default
+ model
+\layout Standard
+
+
+\noun on
+Small
+\noun default
+ model means that only the FSRxL byte is used to access stack and frame,
+ while
+\emph on
+\noun on
+large
+\emph default
+\noun default
+ uses both FSRxL and FSRxH registers.
+ The following table shows the stack/frame pointers sizes according to stack
+ model and the maximum space they can address:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Stack & Frame pointer sizes according to stack model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+small
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+large
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Stack pointer FSR1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Frame pointer FSR2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+
+\noun on
+Large
+\noun default
+stack model is currently not working properly throughout the code generator.
+ So its use is not advised.
+ Also there are some other points that need special care:
+\newline
+
+\layout Enumerate
+
+Do not create stack sections with size more than one physical bank (that
+ is 256 bytes)
+\layout Enumerate
+
+Stack sections should no cross physical bank limits (i.e.
+ #pragma stack 0x50 0x100)
+\layout Standard
+
+These limitations are caused by the fact that only FSRxL is modified when
+ using SMALL stack model, so no more than 256 bytes of stack can be used.
+ This problem will disappear after LARGE model is fully implemented.
+\layout Subsection
+
+Functions
+\layout Standard
+
+In addition to the standard SDCC function keywords, PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port makes available two more:
+\layout List
+\labelwidthstring 00.00.0000
+
+wparam
+\begin_inset LatexCommand \index{PIC16!wparam}
+
+\end_inset
+
+ Use the WREG to pass one byte of the first function argument.
+ This improves speed but you may not use this for functions with arguments
+ that are called via function pointers, otherwise the first byte of the
+ first parameter will get lost.
+ Usage:
+\layout LyX-Code
+
+void func_wparam(int a) wparam
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ /* WREG hold the lower part of a */
+\layout LyX-Code
+
+ /* the high part of a is stored in FSR2+2 (or +3 for large stack model)
+ */
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout List
+\labelwidthstring 00.00.0000
+
+shadowregs
+\begin_inset LatexCommand \index{PIC16!shadowregs}
+
+\end_inset
+
+ When entering/exiting an ISR, it is possible to take advantage of the PIC18F
+ hardware shadow registers which hold the values of WREG, STATUS and BSR
+ registers.
+ This can be done by adding the keyword
+\emph on
+shadowregs
+\emph default
+ before the
+\emph on
+interrupt
+\emph default
+ keyword in the function's header.
+\layout LyX-Code
+
+void isr_shadow(void) shadowregs interrupt 1
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\emph on
+shadowregs
+\emph default
+ instructs the code generator not to store/restore WREG, STATUS, BSR when
+ entering/exiting the ISR.
+\layout Subsection
+
+Function return values
+\layout Standard
+
+Return values from functions are placed to the appropriate registers following
+ a modified Microchip policy optimized for SDCC.
+ The following table shows these registers:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+size
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+destination register
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+24 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PRODH:PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+32 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+FSR0L:PRODH:PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+>32 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+on stack, FSR0 points to the beginning
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Interrupts
+\layout Standard
+
+An interrupt
+\begin_inset LatexCommand \index{PIC16!interrupt}
+
+\end_inset
+
+ service routine (ISR) is declared using the
+\emph on
+interrupt
+\emph default
+ keyword.
+\layout LyX-Code
+
+void isr(void) interrupt
+\emph on
+n
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\emph on
+n
+\emph default
+ is the interrupt number, which for PIC18F devices can be:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+n
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Interrupt Vector
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Interrupt Vector Address
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+RESET vector
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000000
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+HIGH priority interrupts
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000008
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+LOW priority interrupts
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000018
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+When generating assembly code for ISR the code generator places a
+\noun on
+goto
+\noun default
+instruction at the
+\emph on
+Interrupt Vector Address
+\emph default
+ which points at the genetated ISR.
+ This single GOTO instruction is part of an automatically generated
+\emph on
+interrupt entry point
+\emph default
+ function.
+ The actuall ISR code is placed as normally would in the code space.
+ Upon interrupt request, the GOTO instruction is executed which jumps to
+ the ISR code.
+ When declaring interrupt functions as _naked this GOTO instruction is
+\series bold
+not
+\series default
+ generated.
+ The whole interrupt functions is therefore placed at the Interrupt Vector
+ Address of the specific interrupt.
+ This is not a problem for the LOW priority interrupts, but it is a problem
+ for the RESET and the HIGH priority interrupts because code may be written
+ at the next interrupt´s vector address and cause undeterminate program
+ behaviour if that interrupt is raised.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+This is not a problem when
+\layout Enumerate
+
+this is a HIGH interrupt ISR and LOW interrupts are
+\emph on
+disabled
+\emph default
+ or not used.
+\layout Enumerate
+
+when the ISR is small enough not to reach the next interrupt´s vector address.
+\end_inset
+
+
+\layout Standard
+
+
+\emph on
+n
+\emph default
+ is possible to be omitted.
+ This way a function is generated similar to an ISR, but it is not assigned
+ to any interrupt.
+\layout Standard
+
+When entering an interrupt, currently the PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port automatically saves the following registers:
+\layout Itemize
+
+WREG
+\layout Itemize
+
+STATUS
+\layout Itemize
+
+BSR
+\layout Itemize
+
+PROD (PRODL and PRODH)
+\layout Itemize
+
+FSR0 (FSR0L and FSR0H)
+\layout Standard
+
+These registers are restored upon return from the interrupt routine.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+NOTE that when the _naked attribute is specified for an interrupt routine,
+ then NO registers are stored or restored.
+\end_inset
+
+
+\layout Subsection
+
+Generic Pointers
+\layout Standard
+
+Generic pointers are implemented in PIC16 port as 3-byte (24-bit) types.
+ There are 3 types of generic pointers currently implemented data, code
+ and eeprom pointers.
+ They are differentiated by the value of the 7th and 6th bits of the upper
+ byte:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="5" columns="5">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="left" valignment="top" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pointer type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+7th bit
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+6th bit
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+rest of the pointer
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+description
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+data
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuu uuuuxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 12-bit data pointer in data RAM memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+code
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uxxxxx xxxxxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 21-bit code pointer in FLASH memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+eeprom
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuu uuuuuuxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 10-bit eeprom pointer in EEPROM memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+(unimplemented)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+xxxxxx xxxxxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+unimplemented pointer type
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+Generic pointer are read and written with a set of library functions which
+ read/write 1, 2, 3, 4 bytes.
+\layout Subsection
+
+PIC16 C Libraries
+\layout Subsubsection
+
+Standard I/O Streams
+\layout Standard
+
+In the
+\emph on
+stdio.h
+\emph default
+ the type FILE is defined as:
+\layout LyX-Code
+
+typedef char * FILE;
+\layout Standard
+
+This type is the stream type implemented I/O in the PIC18F devices.
+ Also the standard input and output streams are declared in stdio.h:
+\layout LyX-Code
+
+extern FILE * stdin;
+\layout LyX-Code
+
+extern FILE * stdout;
+\layout Standard
+
+The FILE type is actually a generic pointer which defines one more type
+ of generic pointers, the
+\emph on
+stream
+\emph default
+pointer.
+ This new type has the format:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="7">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="left" valignment="top" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pointer type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<7:6>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<5>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<4>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<3:0>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+rest of the pointer
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+descrption
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+stream
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+00
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuuuu uuuuuuuu
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+upper byte high nubble is 0x2n, the rest are zeroes
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+Currently implemented there are 3 types of streams defined:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+stream type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+value
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+module
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_USART
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x200000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via the USART peripheral
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x210000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via the MSSP peripheral
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_USER
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x2f0000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+(none)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via used defined functions
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+The stream identifiers are declared as macros in the stdio.h header.
+\layout Standard
+
+In the libc library there exist the functions that are used to write to
+ each of the above streams.
+ These are
+\layout List
+\labelwidthstring 00.00.0000
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_stream_usart_putchar writes a character at the USART stream
+\layout List
+\labelwidthstring 00.00.0000
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_stream_mssp_putchar writes a character at the MSSP stream
+\layout List
+\labelwidthstring 00.00.0000
+
+putchar dummy function.
+ This writes a character to a user specified manner.
+\layout Standard
+
+In order to increase performance
+\emph on
+putchar
+\emph default
+is declared in stdio.h as having its parameter in WREG (it has the wparam
+ keyword).
+ In stdio.h exists the macro PUTCHAR(arg) that defines the putchar function
+ in a user-friendly way.
+
+\emph on
+arg
+\emph default
+ is the name of the variable that holds the character to print.
+ An example follows:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\newline
+#include <stdio.h>
+\newline
+
+\newline
+PUTCHAR( c )
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ PORTA = c; /* dump character c to PORTA */
+\layout LyX-Code
+
+}
+\newline
+
+\newline
+void main(void)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ stdout = STREAM_USER; /* this is not necessary, since stdout points
+\layout LyX-Code
+
+ * by default to STREAM_USER */
+\layout LyX-Code
+
+ printf (¨This is a printf test
+\backslash
+n¨);
+\layout LyX-Code
+
+}
+\layout LyX-Code
+
+\layout Subsubsection
+
+Printing functions
+\layout Standard
+
+PIC16 contains an implementation of the printf-family of functions.
+ There exist the following functions:
+\layout LyX-Code
+
+extern unsigned int sprintf(char *buf, char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vsprintf(char *buf, char *fmt, va_list ap);
+\layout LyX-Code
+
+\layout LyX-Code
+
+extern unsigned int printf(char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vprintf(char *fmt, va_lista ap);
+\layout LyX-Code
+
+\layout LyX-Code
+
+extern unsigned int fprintf(FILE *fp, char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vfprintf(FILE *fp, char *fmt, va_list ap);
+\layout Standard
+
+For sprintf and vsprintf
+\emph on
+buf
+\emph default
+should normally be a data pointer where the resulting string will be placed.
+ No range checking is done so the user should allocate the necessery buffer.
+ For fprintf and vfprintf
+\emph on
+fp
+\emph default
+ should be a stream pointer (i.e.
+ stdout, STREAM_MSSP, etc...).
+\layout Subsubsection
+
+Signals
+\layout Standard
+
+The PIC18F family of microcontrollers supports a number of interrupt sources.
+ A list of these interrupts is shown in the following table:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="11" columns="4">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="left" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+signal name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+signal name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+descritpion
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_RB
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PORTB change interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_EE
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+EEPROM/FLASH write complete interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT0 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_BCOL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Bus collision interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT1 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_LVD
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Low voltage detect interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT2 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_PSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Parallel slave port interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_CCP1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+CCP1 module interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_AD
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+AD convertion complete interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_CCP2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+CCP2 module interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_RC
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART receive interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR0 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TX
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART transmit interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR1 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SSP receive/transmit interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR2 matches PR2 interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR3
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR3 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+The prototypes for these names are defined in the header file
+\emph on
+signal.h
+\emph default
+ .
+\layout Standard
+
+In order to simplify signal handling, a number of macros is provided:
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_INTHIGH(name) begin the definition of the interrupt dispatch table for
+ high priority interrupts.
+
+\emph on
+name
+\emph default
+ is the function name to use.
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_INTLOW(name) begin the definition of the interrupt dispatch table fo
+ low priority interrupt.
+
+\emph on
+name
+\emph default
+ is the function name to use.
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_HANDLER(sig,handler) define a handler for signal
+\emph on
+sig.
+\layout List
+\labelwidthstring 00.00.0000
+
+END_DEF end the declaration of the dispatch table.
+\layout Standard
+
+Additionally there are two more macros to simplify the declaration of the
+ signal handler:
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series medium
+SIGHANDLER(handler)
+\series default
+this declares the function prototype for the
+\emph on
+handler
+\emph default
+ function.
+\layout List
+\labelwidthstring 00.00.0000
+
+SIGHANDLERNAKED(handler) same as SIGHANDLER() but declares a naked function.
+\layout Standard
+
+An example of using the macros above is shown below:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\layout LyX-Code
+
+#include <signal.h>
+\newline
+
+\newline
+DEF_INTHIGH(high_int)
+\layout LyX-Code
+
+DEF_HANDLER(SIG_TMR0, _tmr0_handler)
+\layout LyX-Code
+
+DEF_HANDLER(SIG_BCOL, _bcol_handler)
+\layout LyX-Code
+
+END_DEF
+\newline
+
+\newline
+SIGHANDLER(_tmr0_handler)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ /* action to be taken when timer 0 overflows */
+\layout LyX-Code
+
+}
+\newline
+
+\newline
+SIGHANDLERNAKED(_bcol_handler)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ _asm
+\layout LyX-Code
+
+ /* action to be taken when bus collision occurs */
+\layout LyX-Code
+
+ retfie
+\layout LyX-Code
+
+ _endasm;
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\series bold
+NOTES:
+\series default
+ Special care should be taken when using the above scheme:
+\layout Itemize
+
+do not place a colon (;) at the end of the DEF_* and END_DEF macros.
+\layout Itemize
+
+when declaring SIGHANDLERNAKED handler never forget to use
+\emph on
+retfie
+\emph default
+ for proper returning.
+\layout Subsection
+
+PIC16 Port -- Tips
+\layout Standard
+
+Here you can find some general tips for compiling programs with SDCC/pic16.
+\layout Subsubsection
+
+Stack size
+\layout Standard
+
+The default stack
+\begin_inset LatexCommand \index{PIC16!stack}
+
+\end_inset
+
+ size (that is 64 bytes) probably is enough for many programs.
+ One must take care that when there are many levels of function nesting,
+ or there is excessive usage of stack, its size should be extended.
+ An example of such a case is the printf/sprintf family of functions.
+ If you encounter problems like not being able to print integers, then you
+ need to set the stack size around the maximum (256 for small stack model).
+ The following diagram shows what happens when calling printf to print an
+ integer:
+\layout LyX-Code
+
+printf () --> ltoa () --> ultoa () --> divschar ()
+\layout Standard
+
+It is should be understood that stack is easily consumed when calling complicate
+d functions.
+ Using command line arguments like -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-fommit-frame-pointer might reduce stack usage by not creating unnecessery
+ stack frames.
+ Other ways to reduce stack usage may exist.
+\layout Subsection
+
+Known bugs
+\layout Standard
+
+The PIC16 Port currently does not pass SDCC's regression test
+\begin_inset LatexCommand \index{Regression test (PIC16)}
+
+\end_inset
+
+ suite (see section
+\begin_inset LatexCommand \ref{sec:Quality-control}
+
+\end_inset
+
+) and thus the nightly regression tests for the PIC16 target are currently
+ disabled for all hosts except for
+\emph on
+Linux on Opteron.
+
+\emph default
+ This means you can see the result of the PIC16 regression tests f.e.
+ by checking the log files in
+\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/regression_test_results/amd64-unknown-linux2.3/}
+
+\end_inset
+
+ (pick the most up to date file there, scroll down, lend a hand).
+\layout Chapter
+
+Debugging
+\layout Standard
+
+There are several approaches to debugging your code.
+ This chapter is meant to show your options and to give detail on some of
+ them:
+\newline
+
+\newline
+When writing your code:
+\layout Itemize
+
+write your code with debugging in mind (avoid duplicating code, put conceptually
+ similar variables into structs, use structured code, have strategic points
+ within your code where all variables are consistent, ...)
+\layout Itemize
+
+run a syntax-checking tool like splint
+\begin_inset LatexCommand \index{splint (syntax checking tool)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{lint (syntax checking tool)}
+
+\end_inset
+
+ (see -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-more-pedantic
+\begin_inset LatexCommand \ref{lyx:more-pedantic-SPLINT}
+
+\end_inset
+
+) over the code.
+\layout Itemize
+
+for the high level code use a C-compiler (like f.e.
+ GCC) to compile run and debug the code on your host.
+ See (see -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-more-pedantic
+\begin_inset LatexCommand \ref{lyx:more-pedantic-SPLINT}
+
+\end_inset
+
+ ) on howto handle syntax extensions like __xdata, __at(), ...
+
+\layout Itemize
+
+use another C-compiler to compile code for your target.
+ Always an option but not recommended:) And not very likely to help you.
+ If you seriously consider walking this path you should at least occasionally
+ check portability of your code.
+ Most commercial compiler vendors will offer an evaluation version so you
+ can test compile your code or snippets of your code.
+\layout Standard
+
+Debugging on a simulator:
+\layout Itemize
+
+there is a separate section about SDCDB (section
+\begin_inset LatexCommand \ref{cha:Debugging-with-SDCDB}
+
+\end_inset
+
+) below.
+\layout Itemize
+
+or (8051 specific) use a freeware/commercial simulator which interfaces
+ to the AOMF
+\begin_inset LatexCommand \index{AOMF, AOMF51}
+
+\end_inset
+
+ file (see
+\begin_inset LatexCommand \ref{OMF file}
+
+\end_inset
+
+) optionally generated by SDCC.
+\layout Standard
+
+Debugging On-target:
+\layout Itemize
+
+use a MCU port pin to serially output debug data to the RS232 port of your
+ host.
+ You'll probably want some level shifting device typically involving a MAX232
+ or similar IC.
+ If the hardware serial port of the MCU is not available search for 'Software
+ UART' in your favourite search machine.
+\layout Itemize
+
+use an on-target monitor.
+ In this context a monitor is a small program which usually accepts commands
+ via a serial line and allows to set program counter, to single step through
+ a program and read/write memory locations.
+ For the 8051 good examples of monitors are paulmon and cmon51 (see section
+
+\begin_inset LatexCommand \ref{sec:Related-open-source-tools}
+
+\end_inset
+
+).
+\layout Itemize
+
+toggle MCU port pins at strategic points within your code and use an oscilloscop
+e.
+ A
+\emph on
+digital oscilloscope
+\emph default
+
+\begin_inset LatexCommand \index{Oscilloscope}
+
+\end_inset
+
+ with deep trace memory is really helpful especially if you have to debug
+ a realtime application.
+ If you need to monitor more pins than your oscilloscope provides you can
+ sometimes get away with a small R-2R network.
+ On a single channel oscilloscope you could f.e.
+ monitor 2 push-pull driven pins by connecting one via a 10\SpecialChar ~
+k
+\begin_inset Formula $\Omega$
+\end_inset
+
+ resistor and the other one by a 5\SpecialChar ~
+k
+\begin_inset Formula $\Omega$
+\end_inset
+
+ resistor to the oscilloscope probe (check output drive capability of the
+ pins you want to monitor).
+ If you need to monitor many more pins a
+\emph on
+logic analyzer
+\emph default
+ will be handy.
+\layout Itemize
+
+use an ICE (
+\emph on
+i
+\emph default
+n
+\emph on
+c
+\emph default
+ircuit
+\emph on
+e
+\emph default
+mulator
+\begin_inset LatexCommand \index{ICE (in circuit emulator)}
+
+\end_inset
+
+).
+ Usually very expensive.
+ And very nice to have too.
+ And usually locks you (for years...) to the devices the ICE can emulate.
+
+\layout Itemize
+
+use a remote debugger.
+ In most 8-bit systems the symbol information is not available on the target,
+ and a complete debugger is too bulky for the target system.
+ Therefore usually a debugger on the host system connects to an on-target
+ debugging stub which accepts only primitive commands.
+
+\newline
+Terms to enter into your favourite search engine could be 'remote debugging',
+ 'gdb stub' or 'inferior debugger'.
+ (is there one?)
+\layout Itemize
+
+use an on target hardware debugger.
+ Some of the more modern MCUs include hardware support for setting break
+ points and monitoring/changing variables by using dedicated hardware pins.
+ This facility doesn't require additional code to run on the target and
+
+\emph on
+usually
+\emph default
+ doesn't affect runtime behaviour until a breakpoint is hit.
+ For the mcs51 most hardware debuggers use the AOMF
+\begin_inset LatexCommand \index{AOMF, AOMF51}
+
+\end_inset
+
+ file (see
+\begin_inset LatexCommand \ref{OMF file}
+
+\end_inset
+
+) as input file.
+
+\layout Standard
+
+Last not least:
+\layout Itemize
+
+if you are not familiar with any of the following terms you're likely to
+ run into problems rather sooner than later:
+\emph on
+volatile
+\emph default
+,
+\emph on
+atomic
+\emph default
+,
+\emph on
+memory map
+\emph default
+,
+\emph on
+overlay
+\emph default
+.
+ As an embedded programmer you
+\emph on
+have
+\emph default
+ to know them so why not look them up
+\emph on
+before
+\emph default
+ you have problems?)
+\layout Itemize
+
+tell someone else about your problem (actually this is a surprisingly effective
+ means to hunt down the bug even if the listener is not familiar with your
+ environment).
+ As 'failure to communicate' is probably one of the job-induced deformations
+ of an embedded programmer this is highly encouraged.
+\layout Section
+
+Debugging with SDCDB
+\begin_inset LatexCommand \label{cha:Debugging-with-SDCDB}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{SDCDB (debugger)}
+
+\end_inset
+
+
+\layout Standard
+
+SDCC is distributed with a source level debugger
+\begin_inset LatexCommand \index{Debugger}
+
+\end_inset
+
+.
+ The debugger uses a command line interface, the command repertoire of the
+ debugger has been kept as close to gdb
+\begin_inset LatexCommand \index{gdb}
+
+\end_inset
+
+ (the GNU debugger) as possible.
+ The configuration and build process is part of the standard compiler installati
+on, which also builds and installs the debugger in the target directory
+ specified during configuration.
+ The debugger allows you debug BOTH at the C source and at the ASM source
+ level.
+\layout Subsection
+
+Compiling for Debugging
+\layout Standard
+
+The -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+ option must be specified for all files for which debug information is to
+ be generated.
+ The compiler generates a .adb file for each of these files.
+ The linker creates the .cdb
+\begin_inset LatexCommand \index{<file>.cdb}
+
+\end_inset
+
+ file from the .adb
+\begin_inset LatexCommand \index{<file>.adb}
+
+\end_inset
+
+ files and the address information.
+ This .cdb is used by the debugger.
+\layout Subsection
+
+How the Debugger Works
+\layout Standard
+
+When the -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug option is specified the compiler generates extra symbol information
+ some of which are put into the assembler source and some are put into the
+ .adb file.
+ Then the linker creates the .cdb file from the individual .adb files with
+ the address information for the symbols.
+ The debugger reads the symbolic information generated by the compiler &
+ the address information generated by the linker.
+ It uses the SIMULATOR (Daniel's S51) to execute the program, the program
+ execution is controlled by the debugger.
+ When a command is issued for the debugger, it translates it into appropriate
+ commands for the simulator.
+ (Currently SDCDM only connects to the simulator but
+\emph on
+newcdb
+\emph default
+ at
+\begin_inset LatexCommand \url{http://ec2drv.sf.net/}
+
+\end_inset
+
+ is an effort to connect directly to the hardware.)
+\layout Subsection
+
+Starting the Debugger SDCDB
+\layout Standard
+
+The debugger can be started using the following command line.
+ (Assume the file you are debugging has the file name foo).
+\newline
+
+\newline
+
+\family sans
+\series bold
+sdcdb foo
+\newline
+
+\family default
+\series default
+
+\newline
+The debugger will look for the following files.
+\layout Itemize
+
+foo.c - the source file.
+\layout Itemize
+
+foo.cdb - the debugger symbol information file.
+\layout Itemize
+
+foo.ihx - the Intel hex format
+\begin_inset LatexCommand \index{Intel hex format}
+
+\end_inset
+
+ object file.
+\layout Subsection
+
+SDCDB Command Line Options
+\layout Itemize
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-directory=<source file directory> this option can used to specify the directory
+ search list.
+ The debugger will look into the directory list specified for source, cdb
+ & ihx files.
+ The items in the directory list must be separated by ':', e.g.
+ if the source files can be in the directories /home/src1 and /home/src2,
+ the -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-directory option should be -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-directory=/home/src1:/home/src2.
+ Note there can be no spaces in the option.
+
+\layout Itemize
+
+-cd <directory> - change to the <directory>.
+\layout Itemize
+
+-fullname - used by GUI front ends.
+\layout Itemize
+
+-cpu <cpu-type> - this argument is passed to the simulator please see the
+ simulator docs for details.
+\layout Itemize
+
+-X <Clock frequency > this options is passed to the simulator please see
+ the simulator docs for details.
+\layout Itemize
+
+-s <serial port file> passed to simulator see the simulator docs for details.
+\layout Itemize
+
+-S <serial in,out> passed to simulator see the simulator docs for details.
+\layout Itemize
+
+-k <port number> passed to simulator see the simulator docs for details.
+\layout Subsection
+
+SDCDB Debugger Commands
+\layout Standard
+
+As mentioned earlier the command interface for the debugger has been deliberatel
+y kept as close the GNU debugger gdb, as possible.
+ This will help the integration with existing graphical user interfaces
+ (like ddd, xxgdb or xemacs) existing for the GNU debugger.
+ If you use a graphical user interface for the debugger you can skip this
+ section.
+\layout Subsubsection*
+
+break [line | file:line | function | file:function]
+\layout Standard
+
+Set breakpoint at specified line or function:
+\newline
+
+\newline
+
+\family sans
+\series bold
+sdcdb>break 100
+\newline
+sdcdb>break foo.c:100
+\newline
+sdcdb>break funcfoo
+\newline
+sdcdb>break foo.c:funcfoo
+\layout Subsubsection*
+
+clear [line | file:line | function | file:function ]
+\layout Standard
+
+Clear breakpoint at specified line or function:
+\newline
+
+\newline
+
+\family sans
+\series bold
+sdcdb>clear 100
+\newline
+sdcdb>clear foo.c:100
+\newline
+sdcdb>clear funcfoo
+\newline
+sdcdb>clear foo.c:funcfoo
+\layout Subsubsection*
+
+continue
+\layout Standard
+
+Continue program being debugged, after breakpoint.
+\layout Subsubsection*
+
+finish
+\layout Standard
+
+Execute till the end of the current function.
+\layout Subsubsection*
+
+delete [n]
+\layout Standard
+
+Delete breakpoint number 'n'.
+ If used without any option clear ALL user defined break points.
+\layout Subsubsection*
+
+info [break | stack | frame | registers ]
+\layout Itemize
+
+info break - list all breakpoints
+\layout Itemize
+
+info stack - show the function call stack.
+\layout Itemize
+
+info frame - show information about the current execution frame.
+\layout Itemize
+
+info registers - show content of all registers.
+\layout Subsubsection*
+
+step
+\layout Standard
+
+Step program until it reaches a different source line.
+ Note: pressing <return> repeats the last command.
+\layout Subsubsection*
+
+next
+\layout Standard
+
+Step program, proceeding through subroutine calls.
+\layout Subsubsection*
+
+run
+\layout Standard
+
+Start debugged program.
+\layout Subsubsection*
+
+ptype variable
+\layout Standard
+
+Print type information of the variable.
+\layout Subsubsection*
+
+print variable
+\layout Standard
+
+print value of variable.
+\layout Subsubsection*
+
+file filename
+\layout Standard
+
+load the given file name.
+ Note this is an alternate method of loading file for debugging.
+\layout Subsubsection*
+
+frame
+\layout Standard
+
+print information about current frame.
+\layout Subsubsection*
+
+set srcmode
+\layout Standard
+
+Toggle between C source & assembly source.
+\layout Subsubsection*
+
+! simulator command
+\layout Standard
+
+Send the string following '!' to the simulator, the simulator response is
+ displayed.
+ Note the debugger does not interpret the command being sent to the simulator,
+ so if a command like 'go' is sent the debugger can loose its execution
+ context and may display incorrect values.
+\layout Subsubsection*
+
+quit
+\layout Standard
+
+"Watch me now.
+ Iam going Down.
+ My name is Bobby Brown"
+\layout Subsection
+
+Interfacing SDCDB with DDD
+\layout Comment
+
+The screenshot was converted from png to eps with:
+\begin_inset Quotes sld
+\end_inset
+
+bmeps -c -e8f -p3 ddd_example.png >ddd_example.eps
+\begin_inset Quotes srd
+\end_inset
+
+ which produces a pretty compact eps file which is free from compression
+ artifacts.
+\layout Comment
+
+The screenshot was included in sdccman.lyx cvs version 1.120 but later removed
+ as this broke the build system on Sourceforge (pdf-file was broken.
+ pdflatex does not accept eps files).
+\layout Standard
+
+The
+\emph on
+p
+\emph default
+ortable
+\emph on
+n
+\emph default
+etwork
+\emph on
+g
+\emph default
+raphics File
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewcvs.cgi/*checkout*/sdcc/trunk/sdcc/doc/figures/ddd_example.png}
+
+\end_inset
+
+
+\size default
+ shows a screenshot of a debugging session with DDD
+\begin_inset LatexCommand \index{DDD (debugger)}
+
+\end_inset
+
+ (Unix only) on a simulated 8032.
+ The debugging session might not run as smoothly as the screenshot suggests.
+ The debugger allows setting of breakpoints, displaying and changing variables,
+ single stepping through C and assembler code.
+
+\newline
+The source was compiled with
+\family sans
+\series bold
+
+\newline
+
+\newline
+sdcc -
+\family default
+\series default
+
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+
+\family sans
+\series bold
+-debug ddd_example.c
+\family default
+\series default
+
+\family sans
+\series bold
+
+\newline
+
+\family default
+\series default
+
+\newline
+and DDD was invoked with
+\family sans
+\series bold
+
+\newline
+
+\newline
+ddd -debugger 'sdcdb -cpu 8032 ddd_example'
+\layout Subsection
+
+Interfacing SDCDB with XEmacs
+\begin_inset LatexCommand \index{XEmacs}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Emacs}
+
+\end_inset
+
+
+\layout Standard
+
+Two files (in emacs lisp) are provided for the interfacing with XEmacs,
+ sdcdb.el and sdcdbsrc.el.
+ These two files can be found in the $(prefix)/bin directory after the installat
+ion is complete.
+ These files need to be loaded into XEmacs for the interface to work.
+ This can be done at XEmacs startup time by inserting the following into
+ your '.xemacs' file (which can be found in your HOME directory):
+\newline
+
+\newline
+
+\family typewriter
+(load-file sdcdbsrc.el)
+\family default
+
+\newline
+
+\newline
+.xemacs is a lisp file so the () around the command is REQUIRED.
+ The files can also be loaded dynamically while XEmacs is running, set the
+ environment variable 'EMACSLOADPATH' to the installation bin directory
+ (<installdir>/bin), then enter the following command ESC-x load-file sdcdbsrc.
+ To start the interface enter the following command:
+\newline
+
+\newline
+
+\family sans
+\series bold
+ESC-x sdcdbsrc
+\family default
+\series default
+
+\newline
+
+\newline
+You will prompted to enter the file name to be debugged.
+
+\newline
+
+\newline
+The command line options that are passed to the simulator directly are bound
+ to default values in the file sdcdbsrc.el.
+ The variables are listed below, these values maybe changed as required.
+\layout Itemize
+
+sdcdbsrc-cpu-type '51
+\layout Itemize
+
+sdcdbsrc-frequency '11059200
+\layout Itemize
+
+sdcdbsrc-serial nil
+\layout Standard
+
+The following is a list of key mapping for the debugger interface.
+\layout Standard
+
+\SpecialChar ~
+
+\family typewriter
+
+\newline
+;;\SpecialChar ~
+Current Listing ::
+\newline
+;;key\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+binding\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Comment
+\newline
+;;---\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+-------\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+-------
+\newline
+;;
+\newline
+;;\SpecialChar ~
+n\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-next-from-src\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB next command
+\newline
+;;\SpecialChar ~
+b\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-back-from-src\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB back command
+\newline
+;;\SpecialChar ~
+c\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-cont-from-src\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB continue command
+\newline
+;;\SpecialChar ~
+s\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-step-from-src\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB step command
+\newline
+;;\SpecialChar ~
+?\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-whatis-c-sexp\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB ptypecommand for data at
+\newline
+;;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+buffer point
+\newline
+;;\SpecialChar ~
+x\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-delete\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB Delete all breakpoints if no arg
+\newline
+;;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+given or delete arg (C-u arg x)
+\newline
+;;\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-frame\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB Display current frame if no arg,
+\newline
+;;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+given or display frame arg
+\newline
+;;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+buffer point
+\newline
+;;\SpecialChar ~
+!\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Goto the SDCDB output buffer
+\newline
+;;\SpecialChar ~
+p\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-print-c-sexp\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB print command for data at
+\newline
+;;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+buffer point
+\newline
+;;\SpecialChar ~
+g\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Goto the SDCDB output buffer
+\newline
+;;\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Toggles Sdcdbsrc mode (turns it off)
+\newline
+;;
+\newline
+;;\SpecialChar ~
+C-c\SpecialChar ~
+C-f\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-finish-from-src\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+SDCDB finish command
+\newline
+;;
+\newline
+;;\SpecialChar ~
+C-x\SpecialChar ~
+SPC\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdb-break\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Set break for line with point
+\newline
+;;\SpecialChar ~
+ESC\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Toggle Sdcdbsrc mode
+\newline
+;;\SpecialChar ~
+ESC\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-srcmode\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+Toggle list mode
+\newline
+;;
+\newline
+
+\layout Chapter
+\pagebreak_top
+TIPS
+\layout Standard
+
+Here are a few guidelines that will help the compiler generate more efficient
+ code, some of the tips are specific to this compiler others are generally
+ good programming practice.
+\layout Itemize
+
+Use the smallest data type to represent your data-value.
+ If it is known in advance that the value is going to be less than 256 then
+ use an 'unsigned char' instead of a 'short' or 'int'.
+ Please note, that ANSI C requires both signed and unsigned chars to be
+ promoted to 'signed int'
+\begin_inset LatexCommand \index{promotion to signed int}
+
+\end_inset
+
+
+\begin_inset Marginal
+collapsed true
+
+\layout Standard
+
+
+\series bold
+\SpecialChar ~
+!
+\end_inset
+
+ before doing any operation.
+ This promotion
+\begin_inset LatexCommand \index{type promotion}
+
+\end_inset
+
+
+\begin_inset LatexCommand \label{type promotion}
+
+\end_inset
+
+ can be omitted, if the result is the same.
+ The effect of the promotion rules together with the sign-extension is often
+ surprising:
+\begin_deeper
+\layout Verse
+
+
+\family typewriter
+unsigned char uc = 0xfe;
+\newline
+if (uc * uc < 0) /* this is true! */
+\newline
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+....
+\newline
+}
+\layout Standard
+
+
+\family typewriter
+uc * uc
+\family default
+ is evaluated as
+\family typewriter
+(int) uc * (int) uc = (int) 0xfe * (int) 0xfe = (int) 0xfc04 = -1024
+\family default
+.
+
+\newline
+Another one:
+\layout Verse
+
+
+\family typewriter
+(unsigned char) -12 / (signed char) -3 = ...
+\layout Standard
+
+No, the result is not 4:
+\layout Verse
+
+
+\family typewriter
+(int) (unsigned char) -12 / (int) (signed char) -3 =
+\newline
+(int) (unsigned char) 0xf4 / (int) (signed char) 0xfd =
+\newline
+(int) 0x00f4 / (int) 0xfffd =
+\newline
+(int) 0x00f4 / (int) 0xfffd =
+\newline
+(int) 244 / (int) -3 =
+\newline
+(int) -81 = (int) 0xffaf;
+\layout Standard
+
+Don't complain, that gcc gives you a different result.
+ gcc uses 32 bit ints, while SDCC uses 16 bit ints.
+ Therefore the results are different.
+\newline
+From
+\begin_inset Quotes sld
+\end_inset
+
+comp.lang.c FAQ
+\begin_inset Quotes srd
+\end_inset
+
+:
+\layout Quote
+
+
+\emph on
+If well-defined overflow characteristics are important and negative values
+ are not, or if you want to steer clear of sign-extension problems when
+ manipulating bits or bytes, use one of the corresponding unsigned types.
+ (Beware when mixing signed and unsigned values in expressions, though.)
+\newline
+Although character types (especially unsigned char) can be used as "tiny"
+ integers, doing so is sometimes more trouble than it's worth, due to unpredicta
+ble sign extension and increased code size.
+\end_deeper
+\layout Itemize
+
+Use unsigned when it is known in advance that the value is not going to
+ be negative.
+ This helps especially if you are doing division or multiplication, bit-shifting
+ or are using an array index.
+\layout Itemize
+
+NEVER jump into a LOOP.
+\layout Itemize
+
+Declare the variables to be local
+\begin_inset LatexCommand \index{local variables}
+
+\end_inset
+
+ whenever possible, especially loop control variables (induction).
+\layout Itemize
+
+Since the compiler does not always do implicit integral promotion, the programme
+r should do an explicit cast when integral promotion is required.
+\layout Itemize
+
+Reducing the size of division, multiplication & modulus operations can reduce
+ code size substantially.
+ Take the following code for example.
+\begin_deeper
+\layout Verse
+
+
+\family typewriter
+foobar(unsigned int p1, unsigned char ch)
+\newline
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+unsigned char ch1 = p1 % ch ;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+....
+\newline
+}
+\layout Standard
+
+For the modulus operation the variable ch will be promoted to unsigned int
+ first then the modulus operation will be performed (this will lead to a
+ call to support routine _moduint()), and the result will be casted to a
+ char.
+ If the code is changed to
+\layout Verse
+
+
+\family typewriter
+foobar(unsigned int p1, unsigned char ch)
+\newline
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+unsigned char ch1 = (unsigned char)p1 % ch ;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+....
+\newline
+}
+\layout Standard
+
+It would substantially reduce the code generated (future versions of the
+ compiler will be smart enough to detect such optimization opportunities).
+\end_deeper
+\layout Itemize
+
+Have a look at the assembly listing to get a
+\begin_inset Quotes sld
+\end_inset
+
+feeling
+\begin_inset Quotes srd
+\end_inset
+
+ for the code generation.
+\layout Section
+
+Porting code from or to other compilers
+\begin_inset LatexCommand \label{sec:Porting-code-to-other-compilers}
+
+\end_inset
+
+
+\layout Itemize
+
+check whether endianness of the compilers differs and adapt where needed.
+\layout Itemize
+
+check the device specific header files
+\begin_inset LatexCommand \index{Header files}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Include files}
+
+\end_inset
+
+ for compiler specific syntax.
+ Eventually include the file <compiler.h
+\begin_inset LatexCommand \index{compiler.h (include file)}
+
+\end_inset
+
+>
+\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/compiler.h?view=markup}
+
+\end_inset
+
+ to allow using common header files.
+ (see f.e.
+ cc2510fx.h
+\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/cc2510fx.h?view=markup}
+
+\end_inset
+
+).
+\layout Itemize
+
+check whether the startup code contains the correct initialization (watchdog,
+ peripherals).
+\layout Itemize
+
+check whether the sizes of short, int, long match.
+\layout Itemize
+
+check if some 16 or 32 bit hardware registers require a specific addressing
+ order (least significant or most significant byte first) and adapt if needed
+ (
+\emph on
+first
+\emph default
+ and
+\emph on
+last
+\emph default
+ relate to time and not to lower/upper memory location here, so this is
+
+\emph on
+not
+\emph default
+ the same as endianness).
+\layout Itemize
+
+check whether the keyword
+\emph on
+volatile
+\emph default
+ is used where needed.
+ The compilers might differ in their optimization characteristics (as different
+ versions of the same compiler might also use more clever optimizations
+ this is good idea anyway).
+ See section
+\begin_inset LatexCommand \ref{sub:Common-interrupt-pitfall-volatile}
+
+\end_inset
+
+.
+\layout Itemize
+
+check that the compilers are not told to supress warnings.
+\layout Itemize
+
+check and convert compiler specific extensions (interrupts, memory areas,
+ pragmas etc.).
+\layout Itemize
+
+check for differences in type promotion.
+ Especially check for math operations on
+\family typewriter
+char
+\family default
+ or
+\family typewriter
+unsigned char
+\family default
+ variables.
+ For the sake of C99 compatibility SDCC will probably promote these to
+\family typewriter
+int
+\family default
+ more often than other compilers.
+ Eventually insert explicit casts to
+\family typewriter
+(char)
+\family default
+or
+\family typewriter
+ (unsigned char)
+\family default
+.
+ Also check that the ~\SpecialChar ~
+operator
+\begin_inset LatexCommand \index{\~\/ Operator}
+
+\end_inset
+
+ is not used on
+\family typewriter
+bit
+\begin_inset LatexCommand \index{bit}
+
+\end_inset
+
+
+\family default
+ variables, use the !\SpecialChar ~
+operator instead.
+ See sections
+\begin_inset LatexCommand \ref{type promotion}
+
+\end_inset
+
+ and
+\begin_inset LatexCommand \ref{sec:Compatibility-with-previous}
+
+\end_inset
+
+.
+\layout Itemize
+
+check the assembly code generated for interrupt routines (f.e.
+ for calls to possibly non-reentrant library functions).
+\layout Itemize
+
+check whether timing loops result in proper timing (or preferably consider
+ a rewrite of the code with timer based delays instead).
+\layout Itemize
+
+check for differences in printf parameters (some compilers push (va_arg
+\begin_inset LatexCommand \index{vararg, va\_arg}
+
+\end_inset
+
+) char variables as
+\family typewriter
+int
+\family default
+ others push them as
+\family typewriter
+char
+\family default
+.
+ See section
+\begin_inset LatexCommand \ref{sec:Compatibility-with-previous}
+
+\end_inset
+
+).
+\layout Itemize
+
+check the resulting memory map
+\begin_inset LatexCommand \index{Memory map}
+
+\end_inset
+
+.
+ Usage of different memory spaces: code, stack, data (for mcs51/ds390 additional
+ly idata, pdata, xdata).
+ Eventually check if unexpected library functions are included.
+\layout Section
+
+Tools
+\begin_inset LatexCommand \index{Tools}
+
+\end_inset
+
+ included in the distribution
+\layout Standard
+\align left
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="12" columns="3">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0pt">
+<column alignment="left" valignment="top" leftline="true" width="0pt">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Purpose
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Directory
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ucSsim
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Simulator for various architectures
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/sim/ucsim
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+keil2sdcc.pl
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+header file
+\begin_inset LatexCommand \index{Header files}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Include files}
+
+\end_inset
+
+ conversion
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/support/scripts
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+mh2h.c
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+header file conversion
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/support/scripts
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+as-gbz80
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Assembler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+as-z80
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Assembler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+asx8051
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Assembler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCDB
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Simulator
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+aslink
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link-z80
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link-gbz80
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+packihx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Intel Hex packer
+\begin_inset LatexCommand \index{packihx (tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/bin
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+
+\layout Section
+
+Documentation
+\begin_inset LatexCommand \index{Documentation}
+
+\end_inset
+
+ included in the distribution
+\layout Standard
+\align left
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="10" columns="2">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Subject / Title
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Where to get / filename
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC Compiler User Guide
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+You're reading it right now
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Changelog of SDCC
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/Changelog
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ASXXXX
+\begin_inset LatexCommand \index{asXXXX (as-gbz80, as-hc08, asx8051, as-z80)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Assembler documentation}
+
+\end_inset
+
+ Assemblers and ASLINK
+\begin_inset LatexCommand \index{aslink}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Linker documentation}
+
+\end_inset
+
+ Relocating Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/as/doc/asxhtm.html
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC regression test
+\begin_inset LatexCommand \index{Regression test}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/doc/test_suite_spec.pdf
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Various notes
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/doc/*
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Notes on debugging with SDCDB
+\begin_inset LatexCommand \index{SDCDB (debugger)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/debugger/README
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Software simulator for microcontrollers
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+sdcc/sim/ucsim/doc
+\family default
+\series default
+\shape default
+\size default
+\emph default
+\bar default
+\noun default
+\color default
+/index.html
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Temporary notes on the pic16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/src/pic16/NOTES
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC internal documentation (debugging file format)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+sdcc/doc/
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+cdbfileformat.pd
+\family default
+\series default
+\shape default
+\size default
+\emph default
+\bar default
+\noun default
+\color default
+f
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+
+\layout Section
+
+Related open source tools
+\begin_inset LatexCommand \label{sec:Related-open-source-tools}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Related tools}
+
+\end_inset
+
+
+\layout Standard
+\align left
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="14" columns="3">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0pt">
+<column alignment="block" valignment="top" leftline="true" width="30line%">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Purpose
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Where to get
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+gpsim
+\begin_inset LatexCommand \index{gpsim (pic simulator)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC simulator
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.dattalo.com/gnupic/gpsim.html}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+gputils
+\begin_inset LatexCommand \index{gputils (pic tools)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+GNU PIC utilities
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+flP5
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC programmer
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://freshmeat.net/projects/flp5/}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ec2drv/newcdb
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Tools for Silicon Laboratories JTAG debug adapter, partly based on SDCDB
+ (Unix only)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/ec2drv}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+indent
+\begin_inset LatexCommand \index{indent (source formatting tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Formats C source - Master of the white spaces
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://directory.fsf.org/GNU/indent.html}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+srecord
+\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Object file conversion, checksumming, ...
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/srecord}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+objdump
+\begin_inset LatexCommand \index{objdump (tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Object file conversion, ...
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Part of binutils (should be there anyway)
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+cmon51
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8051 monitor (hex up-/download, single step, disassemble)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/cmon51}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+doxygen
+\begin_inset LatexCommand \index{doxygen (source documentation tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Source code documentation system
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.doxygen.org}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+kdevelop
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+IDE (has anyone tried integrating SDCC & SDCDB? Unix only)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.kdevelop.org}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+paulmon
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8051 monitor (hex up-/download, single step, disassemble)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.pjrc.com/tech/8051/paulmon2.html}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+splint
+\begin_inset LatexCommand \index{splint (syntax checking tool)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Statically checks c sources (see
+\begin_inset LatexCommand \ref{lyx:more-pedantic-SPLINT}
+
+\end_inset
+
+)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.splint.org}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ddd
+\begin_inset LatexCommand \index{DDD (debugger)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Debugger, serves nicely as GUI to SDCDB
+\begin_inset LatexCommand \index{SDCDB (debugger)}
+
+\end_inset
+
+ (Unix only)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.gnu.org/software/ddd/}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+
+\layout Section
+
+Related documentation / recommended reading
+\layout Standard
+\align left
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="7" columns="3">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0pt">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Subject / Title
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Where to get
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+c-refcard.pdf
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+C Reference Card
+\begin_inset LatexCommand \index{C Reference card}
+
+\end_inset
+
+, 2 pages
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://refcards.com/refcards/c/index.html}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+c-faq
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+C-FAQ
+\begin_inset LatexCommand \index{C FAQ}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://www.c-faq.com}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ISO/IEC 9899:TC2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset Quotes sld
+\end_inset
+
+C-Standard
+\begin_inset Quotes srd
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://www.open-std.org/jtc1/sc22/wg14/www/standards.html#9899}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ISO/IEC DTR 18037
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset Quotes sld
+\end_inset
+
+Extensions for Embedded C
+\begin_inset Quotes srd
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1021.pdf}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Latest datasheet of target CPU
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+vendor
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Revision history of datasheet
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+vendor
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+
+\layout Section
+
+Application notes specifically for SDCC
+\layout Standard
+
+SDCC makes no claims about the completeness of this list and about up-to-datenes
+s or correctness of the application notes
+\begin_inset LatexCommand \index{Application notes}
+
+\end_inset
+
+.
+\layout Standard
+\align left
+
+\size footnotesize
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="7" columns="3">
+<features>
+<column alignment="block" valignment="top" leftline="true" width="17col%">
+<column alignment="block" valignment="top" leftline="true" width="27col%">
+<column alignment="block" valignment="top" leftline="true" rightline="true" width="57col%">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Vendor
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Subject / Title
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Where to get
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Maxim / Dallas
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Using the SDCC Compiler for the DS80C400
+\begin_inset LatexCommand \index{DS80C400}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://pdfserv.maxim-ic.com/en/an/AN3346.pdf}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Maxim / Dallas
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="left" valignment="top" topline="true" leftline="true" usebox="none" width="30line%">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Using the Free SDCC C Compiler to Develop Firmware for the DS89C420/430/440/450
+\begin_inset LatexCommand \index{DS89C4x0}
+
+\end_inset
+
+ Family of Microcontrollers
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://pdfserv.maxim-ic.com/en/an/AN3477.pdf}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Silicon Laboratories / Cygnal
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Integrating SDCC 8051 Tools Into The Silicon Labs IDE
+\begin_inset LatexCommand \index{IDE}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/en/an198.pdf}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Ramtron / Goal Semiconductor
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Interfacing SDCC to Syn and Textpad
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://www.ramtron.com/doc/Products/Microcontroller/Support_Tools.asp}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Ramtron / Goal Semiconductor
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Installing and Configuring SDCC and Crimson Editor
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://www.ramtron.com/doc/Products/Microcontroller/Support_Tools.asp}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+Texas Instruments
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+MSC12xx Programming with SDCC
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\size footnotesize
+
+\begin_inset LatexCommand \url{http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=sbaa109&fileType=pdf}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Section
+
+Some Questions
+\layout Standard
+
+Some questions answered, some pointers given - it might be time to in turn
+ ask
+\emph on
+you
+\emph default
+ some questions:
+\layout Itemize
+
+can you solve your project with the selected microcontroller? Would you
+ find out early or rather late that your target is too small/slow/whatever?
+ Can you switch to a slightly better device if it doesn't fit?
+\layout Itemize
+
+should you solve the problem with an 8 bit CPU? Or would a 16/32 bit CPU
+ and/or another programming language be more adequate? Would an operating
+ system on the target device help?
+\layout Itemize
+
+if you solved the problem, will the marketing department be happy?
+\layout Itemize
+
+if the marketing department is happy, will customers be happy?
+\layout Itemize
+
+if you're the project manager, marketing department and maybe even the customer
+ in one person, have you tried to see the project from the outside?
+\layout Itemize
+
+is the project done if you think it is done? Or is just that other interface/pro
+tocol/feature/configuration/option missing? How about website, manual(s),
+ internationali(z|s)ation, packaging, labels, 2nd source for components,
+ electromagnetic compatability/interference, documentation for production,
+ production test software, update mechanism, patent issues?
+\layout Itemize
+
+is your project adequately positioned in that magic triangle: fame, fortune,
+ fun?
+\layout Standard
+
+Maybe not all answers to these questions are known and some answers may
+ even be
+\emph on
+no
+\emph default
+, nevertheless knowing these questions may help you to avoid burnout
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+burnout is bad for electronic devices, programmers and motorcycle tyres
+\end_inset
+
+.
+ Chances are you didn't want to hear some of them...
+\layout Chapter
+
+Support
+\begin_inset LatexCommand \index{Support}
+
+\end_inset
+
+
+\layout Standard
+
+SDCC has grown to be a large project.
+ The compiler alone (without the preprocessor, assembler and linker) is
+ well over 150,000 lines of code (blank stripped).
+ The open source nature of this project is a key to its continued growth
+ and support.
+ You gain the benefit and support of many active software developers and
+ end users.
+ Is SDCC perfect? No, that's why we need your help.
+ The developers take pride in fixing reported bugs.
+ You can help by reporting the bugs and helping other SDCC users.
+ There are lots of ways to contribute, and we encourage you to take part
+ in making SDCC a great software package.
+
+\layout Standard
+
+The SDCC project is hosted on the SDCC sourceforge site at
+\begin_inset LatexCommand \htmlurl{http://sourceforge.net/projects/sdcc}
+
+\end_inset
+
+.
+ You'll find the complete set of mailing lists
+\begin_inset LatexCommand \index{Mailing list(s)}
+
+\end_inset
+
+, forums, bug reporting system, patch submission
+\begin_inset LatexCommand \index{Patch submission}
+
+\end_inset
+
+ system, download
+\begin_inset LatexCommand \index{download}
+
+\end_inset
+
+ area and Subversion code repository
+\begin_inset LatexCommand \index{Subversion code repository}
+
+\end_inset
+
+ there.
+\layout Section
+
+Reporting Bugs
+\begin_inset LatexCommand \index{Bug reporting}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Reporting bugs}
+
+\end_inset
+
+
+\layout Standard
+
+The recommended way of reporting bugs is using the infrastructure of the
+ sourceforge site.
+ You can follow the status of bug reports there and have an overview about
+ the known bugs.
+\layout Standard
+
+Bug reports are automatically forwarded to the developer mailing list and
+ will be fixed ASAP.
+ When reporting a bug, it is very useful to include a small test program
+ (the smaller the better) which reproduces the problem.
+ If you can isolate the problem by looking at the generated assembly code,
+ this can be very helpful.
+ Compiling your program with the -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-dumpall
+\begin_inset LatexCommand \index{-\/-dumpall}
+
+\end_inset
+
+ option can sometimes be useful in locating optimization problems.
+ When reporting a bug please make sure you:
+\layout Enumerate
+
+Attach the code you are compiling with SDCC.
+
+\layout Enumerate
+
+Specify the exact command you use to run SDCC, or attach your Makefile.
+
+\layout Enumerate
+
+Specify the SDCC version (type "
+\family sans
+\series bold
+sdcc -v
+\family default
+\series default
+"), your platform, and operating system.
+
+\layout Enumerate
+
+Provide an exact copy of any error message or incorrect output.
+
+\layout Enumerate
+
+Put something meaningful in the subject of your message.
+\layout Standard
+
+Please attempt to include these 5 important parts, as applicable, in all
+ requests for support or when reporting any problems or bugs with SDCC.
+ Though this will make your message lengthy, it will greatly improve your
+ chance that SDCC users and developers will be able to help you.
+ Some SDCC developers are frustrated by bug reports without code provided
+ that they can use to reproduce and ultimately fix the problem, so please
+ be sure to provide sample code if you are reporting a bug!
+\layout Standard
+
+Please have a short check that you are using a recent version of SDCC and
+ the bug is not yet known.
+ This is the link for reporting bugs:
+\begin_inset LatexCommand \htmlurl{http://sourceforge.net/tracker/?group_id=599&atid=100599}
+
+\end_inset
+
+.
+ With SDCC on average having more than 200 downloads
+\begin_inset LatexCommand \index{download}
+
+\end_inset
+
+ on sourceforge per day
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+220 daily downloads on average Jan-Sept 2006 and about 150 daily downloads
+ between 2002 and 2005.
+ This does not include other methods of distribution.
+\end_inset
+
+ there must be some users.
+ So it's not exactly easy to find a new bug.
+ If you find one we need it:
+\emph on
+reporting bugs is good
+\emph default
+.
+\layout Section
+
+Requesting Features
+\begin_inset LatexCommand \label{sub:Requesting-Features}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Feature request}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Requesting features}
+
+\end_inset
+
+
+\layout Standard
+
+Like bug reports feature requests are forwarded to the developer mailing
+ list.
+ This is the link for requesting features:
+\begin_inset LatexCommand \htmlurl{http://sourceforge.net/tracker/?group_id=599&atid=350599}
+
+\end_inset
+
+.
+\layout Section
+
+Submitting patches
+\layout Standard
+
+Like bug reports contributed patches are forwarded to the developer mailing
+ list.
+ This is the link for submitting patches
+\begin_inset LatexCommand \index{Patch submission}
+
+\end_inset
+
+:
+\begin_inset LatexCommand \url{http://sourceforge.net/tracker/?group_id=599&atid=300599}
+
+\end_inset
+
+.
+\layout Standard
+
+You need to specify some parameters to the
+\family typewriter
+diff
+\family default
+ command for the patches to be useful.
+ If you modified more than one file a patch created f.e.
+ with
+\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
+diff -Naur unmodified_directory modified_directory >my_changes.patch
+\begin_inset Quotes srd
+\end_inset
+
+
+\family default
+\series default
+ will be fine, otherwise
+\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
+diff -u sourcefile.c.orig sourcefile.c >my_changes.patch
+\begin_inset Quotes srd
+\end_inset
+
+
+\series default
+
+\family default
+will do.
+\layout Section
+
+Getting Help
+\layout Standard
+
+These links should take you directly to the
+\begin_inset LatexCommand \url[Mailing lists]{http://sourceforge.net/mail/?group_id=599}
+
+\end_inset
+
+
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+Traffic on sdcc-devel and sdcc-user is about 100 mails/month each not counting
+ automated messages (mid 2003)
+\end_inset
+
+ and the
+\begin_inset LatexCommand \url[Forums]{http://sourceforge.net/forum/?group_id=599}
+
+\end_inset
+
+, lists
+\begin_inset LatexCommand \index{Mailing list(s)}
+
+\end_inset
+
+ and forums are archived and searchable so if you are lucky someone already
+ had a similar problem.
+ While mails to the lists themselves are delivered promptly their web front
+ end on sourceforge sometimes shows a severe time lag (up to several weeks),
+ if you're seriously using SDCC please consider subscribing to the lists.
+\layout Section
+
+ChangeLog
+\layout Standard
+
+You can follow the status of the Subversion version
+\begin_inset LatexCommand \index{version}
+
+\end_inset
+
+ of SDCC by watching the Changelog
+\begin_inset LatexCommand \index{Changelog}
+
+\end_inset
+
+ in the Subversion repository
+\size footnotesize
+
+\begin_inset LatexCommand \htmlurl{http://svn.sourceforge.net/viewcvs.cgi/*checkout*/sdcc/trunk/sdcc/ChangeLog}
+
+\end_inset
+
+.
+\layout Section
+
+Subversion Source Code Repository
+\layout Standard
+
+The output of
+\family sans
+\series bold
+sdcc --version
+\family default
+\series default
+ or the filenames of the snapshot versions of SDCC include date and its
+ Subversion
+\begin_inset LatexCommand \index{Subversion code repository}
+
+\end_inset
+
+ number.
+ Subversion allows to download the source of recent or previous versions
+
+\begin_inset LatexCommand \url{http://sourceforge.net/svn/?group_id=599}
+
+\end_inset
+
+ (by number or by date).
+ An on-line source code browser and detailled instructions are also available
+ there.
+ SDCC versions starting from 1999 up to now are available (currently the
+ versions prior to the conversion from cvs
+\begin_inset LatexCommand \index{cvs|see{Subversion}}
+
+\end_inset
+
+ to Subversion (April 2006) are either by accessible by Subversion or by
+ cvs).
+\layout Section
+
+Release policy
+\begin_inset LatexCommand \index{Release policy}
+
+\end_inset
+
+
+\layout Standard
+
+Historically there often were long delays between official releases and
+ the sourceforge download area tends to get not updated at all.
+ Excuses in the past might have referred to problems with live range analysis,
+ but as this was fixed a while ago, the current problem is that another
+ excuse has to be found.
+ Kidding aside, we have to get better there! On the other hand there are
+ daily snapshots available at
+\begin_inset LatexCommand \htmlurl[snap]{http://sdcc.sourceforge.net/snap.php}
+
+\end_inset
+
+, and you can always build the very last version (hopefully with many bugs
+ fixed, and features added) from the source code available at
+\begin_inset LatexCommand \htmlurl[Source]{http://sdcc.sourceforge.net/snap.php#Source}
+
+\end_inset
+
+.
+ A release wiki
+\begin_inset LatexCommand \index{wiki}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Release wiki}
+
+\end_inset
+
+ at
+\begin_inset LatexCommand \url{http://sdcc.sf.net/release_wiki/}
+
+\end_inset
+
+ also holds some information about past and future releases.
+\layout Section
+
+Examples
+\begin_inset LatexCommand \index{Examples}
+
+\end_inset
+
+
+\layout Standard
+
+You'll find some small examples in the directory
+\emph on
+sdcc/device/examples/.
+
+\emph default
+More examples and libraries are available at
+\emph on
+ The SDCC Open Knowledge Resource
+\begin_inset LatexCommand \url{http://sdccokr.dl9sec.de/}
+
+\end_inset
+
+
+\emph default
+web site or at
+\begin_inset LatexCommand \url{http://www.pjrc.com/tech/8051/}
+
+\end_inset
+
+.
+\layout Comment
+
+I did insert a reference to Paul's web site here although it seems rather
+ dedicated to a specific 8032 board (I think it's okay because it f.e.
+ shows LCD/Harddisc interface and has a free 8051 monitor.
+ Independent 8032 board vendors face hard competition of heavily subsidized
+ development boards anyway).
+\layout Comment
+
+Maybe we should include some links to real world applications.
+ Preferably pointer to pointers (one for each architecture) so this stays
+ manageable here?
+\layout Section
+
+Quality control
+\begin_inset LatexCommand \label{sec:Quality-control}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Quality control}
+
+\end_inset
+
+
+\layout Standard
+
+The compiler is passed through nightly compile and build checks.
+ The so called
+\shape italic
+regression tests
+\shape default
+
+\begin_inset LatexCommand \index{Regression test}
+
+\end_inset
+
+ check that SDCC itself compiles flawlessly on several host platforms (i386,
+ Opteron, 64 bit Alpha, ppc64, MacOS X on PPC, Solaris on Sparc) and checks
+ the quality of the code generated by SDCC by running the code for several
+ target platforms through simulators.
+ The regression test suite comprises more than 100 files which expand to
+ more than 500 test cases which include more than 4500 tests.
+ The results of these tests are published daily on SDCC's snapshot page
+ (click on the red or green symbols on the right side of
+\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
+
+\end_inset
+
+).
+\layout Standard
+
+There is a separate document
+\shape italic
+test_suite.pdf
+\begin_inset LatexCommand \index{Test suite}
+
+\end_inset
+
+
+\shape default
+
+\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/doc/test_suite_spec.pdf}
+
+\end_inset
+
+ about the regression test suite.
+\layout Standard
+
+You'll find the test code in the directory
+\shape italic
+sdcc/support/regression
+\shape default
+.
+ You can run these tests manually by running
+\family sans
+make
+\family default
+ in this directory (or f.e.
+
+\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
+make test-mcs51
+\begin_inset Quotes srd
+\end_inset
+
+
+\family default
+\series default
+ if you don't want to run the complete tests).
+ The test code might also be interesting if you want to look for examples
+\begin_inset LatexCommand \index{Examples}
+
+\end_inset
+
+ checking corner cases of SDCC or if you plan to submit patches
+\begin_inset LatexCommand \index{Patch submission}
+
+\end_inset
+
+.
+\layout Standard
+
+The 14bit pic port uses a different set of regression tests
+\begin_inset LatexCommand \index{Regression test (PIC14)}
+
+\end_inset
+
+, you'll find them in the directory
+\shape italic
+sdcc/src/regression
+\shape default
+.
+\layout Section
+
+Use of SDCC in Education
+\layout Standard
+
+In short:
+\emph on
+highly
+\emph default
+ encouraged
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+the phrase "use in education" might evoke the association "
+\emph on
+only
+\emph default
+ fit for use in education".
+ This connotation is not intended but nevertheless risked as the licensing
+ of SDCC makes it difficult to offer educational discounts
+\end_inset
+
+.
+ If your rationales are to:
+\layout Enumerate
+
+give students a chance to understand the
+\emph on
+complete
+\emph default
+ steps of code generation
+\layout Enumerate
+
+have a curriculum that can be extended for years.
+ Then you could use an fpga board as target and your curriculum will seamlessly
+ extend from logic synthesis (
+\begin_inset LatexCommand \url[http://www.opencores.org]{opencores.org}
+
+\end_inset
+
+,
+\begin_inset LatexCommand \url[Oregano]{http://www.oregano.at/ip/ip01.htm}
+
+\end_inset
+
+), over assembly programming, to C to FPGA compilers (
+\begin_inset LatexCommand \url[FPGAC]{http://sf.net/projects/fpgac}
+
+\end_inset
+
+) and to C.
+\layout Enumerate
+
+be able to insert excursions about skills like using a revision control
+ system, submitting/applying patches, using a type-setting (as opposed to
+ word-processing) engine LyX/LaTeX, using
+\begin_inset LatexCommand \url[SourceForge]{http://www.sf.net}
+
+\end_inset
+
+, following some
+\begin_inset LatexCommand \url[netiquette]{http://en.wikipedia.org/wiki/Netiquette}
+
+\end_inset
+
+, understanding BSD/LGPL/GPL/Proprietary licensing, growth models of Open
+ Source Software, CPU simulation, compiler regression tests
+\begin_inset LatexCommand \index{Regression test}
+
+\end_inset
+
+.
+
+\newline
+And if there should be a shortage of ideas then you can always point students
+ to the ever-growing feature request list
+\begin_inset LatexCommand \htmlurl{http://sourceforge.net/tracker/?group_id=599&atid=350599}
+
+\end_inset
+
+.
+\layout Enumerate
+
+not tie students to a specific host platform and instead allow them to use
+ a host platform of
+\emph on
+their
+\emph default
+ choice (among them Alpha, i386, i386_64, MacOs, Mips, Sparc, Windows and
+ eventually
+\begin_inset LatexCommand \url[OLPC]{http://www.laptop.org}
+
+\end_inset
+
+)
+\layout Enumerate
+
+not encourage students to use illegal copies of educational software
+\layout Enumerate
+
+be immune to licensing/availability/price changes of the chosen tool chain
+\layout Enumerate
+
+be able to change to a new target platform without having to adopt a new
+ tool chain
+\layout Enumerate
+
+have complete control over and insight into the tool chain
+\layout Enumerate
+
+make your students aware about the pros and cons of open source software
+ development
+\layout Enumerate
+
+give back to the public as you are probably at least partially publically
+ funded
+\layout Enumerate
+
+give students a chance to publically prove their skills and to possibly
+ see a world wide impact
+\layout Standard
+
+then SDCC is probably among the first choices.
+ Well, probably SDCC might be the only choice.
+\layout Chapter
+\pagebreak_top
+SDCC Technical Data
+\layout Section
+
+Optimizations
+\begin_inset LatexCommand \index{Optimizations}
+
+\end_inset
+
+
+\layout Standard
+
+SDCC performs a host of standard optimizations in addition to some MCU specific
+ optimizations.
+
+\layout Subsection
+
+Sub-expression Elimination
+\begin_inset LatexCommand \index{Subexpression elimination}
+
+\end_inset
+
+
+\layout Standard
+
+The compiler does local and
+\emph on
+g
+\emph default
+lobal
+\emph on
+c
+\emph default
+ommon
+\emph on
+s
+\emph default
+ubexpression
+\emph on
+e
+\emph default
+limination, e.g.:
+\layout Verse
+
+
+\family typewriter
+i = x + y + 1;
+\newline
+j = x + y;
+\layout Standard
+
+will be translated to
+\layout Verse
+
+
+\family typewriter
+iTemp = x + y;
+\newline
+i = iTemp + 1;
+\newline
+j = iTemp;
+\layout Standard
+
+Some subexpressions are not as obvious as the above example, e.g.:
+\layout Verse
+
+
+\family typewriter
+a->b[i].c = 10;
+\newline
+a->b[i].d = 11;
+\layout Standard
+
+In this case the address arithmetic a->b[i] will be computed only once;
+ the equivalent code in C would be.
+\layout Verse
+
+
+\family typewriter
+iTemp = a->b[i];
+\newline
+iTemp.c = 10;
+\newline
+iTemp.d = 11;
+\layout Standard
+
+The compiler will try to keep these temporary variables in registers.
+\layout Subsection
+
+Dead-Code Elimination
+\begin_inset LatexCommand \index{Dead-code elimination}
+
+\end_inset
+
+
+\layout Verse
+
+
+\family typewriter
+int global;
+\newline
+
+\newline
+void f () {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+int i;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+i = 1; \SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* dead store */
+\newline
+\SpecialChar ~
+\SpecialChar ~
+global = 1;\SpecialChar ~
+/* dead store */
+\newline
+\SpecialChar ~
+\SpecialChar ~
+global = 2;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+return;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+global = 3;\SpecialChar ~
+/* unreachable */
+\newline
+}
+\layout Standard
+
+will be changed to
+\layout Verse
+
+
+\family typewriter
+int global;
+\newline
+
+\newline
+void f () {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+global = 2;
+\newline
+}
+\layout Subsection
+
+Copy-Propagation
+\begin_inset LatexCommand \index{Copy propagation}
+
+\end_inset
+
+
+\layout Verse
+
+
+\family typewriter
+int f() {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+int i, j;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+i = 10;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+j = i;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+return j;
+\newline
+}
+\layout Standard
+
+will be changed to
+\layout Verse
+
+
+\family typewriter
+int f() {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+int i, j;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+i = 10;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+j = 10;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+return 10;
+\newline
+}
+\layout Standard
+
+Note: the dead stores created by this copy propagation will be eliminated
+ by dead-code elimination.
+\layout Subsection
+
+Loop Optimizations
+\begin_inset LatexCommand \index{Loop optimization}
+
+\end_inset
+
+
+\begin_inset LatexCommand \label{sub:Loop-Optimizations}
+
+\end_inset
+
+
+\layout Standard
+
+Two types of loop optimizations are done by SDCC
+\emph on
+loop invariant
+\emph default
+ lifting and
+\emph on
+ strength reduction
+\emph default
+ of loop induction variables.
+ In addition to the strength reduction the optimizer marks the induction
+ variables and the register allocator tries to keep the induction variables
+ in registers for the duration of the loop.
+ Because of this preference of the register allocator
+\begin_inset LatexCommand \index{Register allocation}
+
+\end_inset
+
+, loop induction optimization causes an increase in register pressure, which
+ may cause unwanted spilling of other temporary variables into the stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ / data space.
+ The compiler will generate a warning message when it is forced to allocate
+ extra space either on the stack or data space.
+ If this extra space allocation is undesirable then induction optimization
+ can be eliminated either for the entire source file (with -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-noinduction option) or for a given function only using #pragma\SpecialChar ~
+noinduction
+\begin_inset LatexCommand \index{\#pragma noinduction}
+
+\end_inset
+
+.
+\newline
+
+\newline
+Loop Invariant:
+\layout Verse
+
+
+\family typewriter
+for (i = 0 ; i < 100 ; i ++)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+f += k + l;
+\layout Standard
+
+changed to
+\layout Verse
+
+
+\family typewriter
+itemp = k + l;
+\newline
+for (i = 0; i < 100; i++)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+f += itemp;
+\layout Standard
+
+As mentioned previously some loop invariants are not as apparent, all static
+ address computations are also moved out of the loop.
+\newline
+
+\newline
+Strength Reduction
+\begin_inset LatexCommand \index{Strength reduction}
+
+\end_inset
+
+, this optimization substitutes an expression by a cheaper expression:
+\layout Verse
+
+
+\family typewriter
+for (i=0;i < 100; i++)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ar[i*5] = i*3;
+\layout Standard
+
+changed to
+\layout Verse
+
+
+\family typewriter
+itemp1 = 0;
+\newline
+itemp2 = 0;
+\newline
+for (i=0;i< 100;i++) {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ar[itemp1] = itemp2;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+itemp1 += 5;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+itemp2 += 3;
+\newline
+}
+\layout Standard
+
+The more expensive multiplication
+\begin_inset LatexCommand \index{Multiplication}
+
+\end_inset
+
+ is changed to a less expensive addition.
+\layout Subsection
+
+Loop Reversing
+\begin_inset LatexCommand \index{Loop reversing}
+
+\end_inset
+
+
+\layout Standard
+
+This optimization is done to reduce the overhead of checking loop boundaries
+ for every iteration.
+ Some simple loops can be reversed and implemented using a
+\begin_inset Quotes eld
+\end_inset
+
+decrement and jump if not zero
+\begin_inset Quotes erd
+\end_inset
+
+ instruction.
+ SDCC checks for the following criterion to determine if a loop is reversible
+ (note: more sophisticated compilers use data-dependency analysis to make
+ this determination, SDCC uses a more simple minded analysis).
+\layout Itemize
+
+The 'for' loop is of the form
+\newline
+
+\newline
+
+\family typewriter
+for(<symbol> = <expression>; <sym> [< | <=] <expression>; [<sym>++ | <sym>
+ += 1])
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+<for body>
+\layout Itemize
+
+The <for body> does not contain
+\begin_inset Quotes eld
+\end_inset
+
+continue
+\begin_inset Quotes erd
+\end_inset
+
+ or 'break
+\begin_inset Quotes erd
+\end_inset
+
+.
+\layout Itemize
+
+All goto's are contained within the loop.
+\layout Itemize
+
+No function calls within the loop.
+\layout Itemize
+
+The loop control variable <sym> is not assigned any value within the loop
+\layout Itemize
+
+The loop control variable does NOT participate in any arithmetic operation
+ within the loop.
+\layout Itemize
+
+There are NO switch statements in the loop.
+\layout Subsection
+
+Algebraic Simplifications
+\layout Standard
+
+SDCC does numerous algebraic simplifications, the following is a small sub-set
+ of these optimizations.
+\layout Verse
+
+
+\family typewriter
+i = j + 0;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ /* changed to: */\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ i = j;
+\newline
+i /= 2;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ /* changed to: */\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ i >>= 1;
+\newline
+i = j - j;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ /* changed to: */\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ i = 0;
+\newline
+i = j / 1;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ /* changed to: */\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ i = j;
+\layout Standard
+
+Note the subexpressions
+\begin_inset LatexCommand \index{Subexpression}
+
+\end_inset
+
+ given above are generally introduced by macro expansions or as a result
+ of copy/constant propagation.
+\layout Subsection
+
+'switch' Statements
+\begin_inset LatexCommand \label{sub:'switch'-Statements}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{switch statement}
+
+\end_inset
+
+
+\layout Standard
+
+SDCC can optimize switch statements to jump tables
+\begin_inset LatexCommand \index{jump tables}
+
+\end_inset
+
+.
+ It makes the decision based on an estimate of the generated code size.
+ SDCC is quite liberal in the requirements for jump table generation:
+\layout Itemize
+
+The labels need not be in order, and the starting number need not be one
+ or zero, the case labels are in numerical sequence or not too many case
+ labels are missing.
+\begin_deeper
+\layout Verse
+
+
+\family typewriter
+switch(i) {\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+switch (i) {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 4: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 0: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 1: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 3: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 3: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 4: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 8: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 9: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 10: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 11: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 8: ...
+
+\newline
+}\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+}
+\layout Standard
+
+Both the above switch statements will be implemented using a jump-table.
+ The example to the right side is slightly more efficient as the check for
+ the lower boundary of the jump-table is not needed.
+\end_deeper
+\layout Itemize
+
+The number of case labels is not larger than supported by the target architectur
+e.
+\layout Itemize
+
+If the case labels are not in numerical sequence ('gaps' between cases)
+ SDCC checks whether a jump table with additionally inserted dummy cases
+ is still attractive.
+
+\layout Itemize
+
+If the starting number is not zero and a check for the lower boundary of
+ the jump-table can thus be eliminated SDCC might insert dummy cases 0,
+ ...
+ .
+\layout Standard
+
+Switch statements which have large gaps in the numeric sequence or those
+ that have too many case labels can be split into more than one switch statement
+ for efficient code generation, e.g.:
+\layout Verse
+
+
+\family typewriter
+switch (i) {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 1: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 2: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 3: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 4: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 101: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 102: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 103: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 104: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 105: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 106: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 107: ...
+
+\newline
+}
+\layout Standard
+
+If the above switch statement is broken down into two switch statements
+\layout Verse
+
+
+\family typewriter
+switch (i) {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 1: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 2: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 3: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 4: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
+\newline
+}
+\layout Standard
+
+and
+\layout Verse
+
+
+\family typewriter
+switch (i) {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 101: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 102: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 103: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 104: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 105: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 106: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 107: ...
+
+\newline
+}
+\layout Standard
+
+then both the switch statements will be implemented using jump-tables whereas
+ the unmodified switch statement will not be.
+\layout Comment
+
+There might be reasons which SDCC cannot know about to either favour or
+ not favour jump tables.
+ If the target system has to be as quick for the last switch case as for
+ the first (pro jump table), or if the switch argument is known to be zero
+ in the majority of the cases (contra jump table).
+\layout Standard
+
+The pragma nojtbound
+\begin_inset LatexCommand \index{\#pragma nojtbound}
+
+\end_inset
+
+ can be used to turn off checking the
+\emph on
+j
+\emph default
+ump
+\emph on
+t
+\emph default
+able
+\emph on
+bound
+\emph default
+aries.
+ It has no effect if a default label is supplied.
+ Use of this pragma is dangerous: if the switch
+\begin_inset LatexCommand \index{switch statement}
+
+\end_inset
+
+ argument is not matched by a case statement the processor will happily
+ jump into Nirvana.
+\layout Subsection
+
+Bit-shifting Operations
+\begin_inset LatexCommand \index{Bit shifting}
+
+\end_inset
+
+.
+\layout Standard
+
+Bit shifting is one of the most frequently used operation in embedded programmin
+g.
+ SDCC tries to implement bit-shift operations in the most efficient way
+ possible, e.g.:
+\layout Verse
+
+
+\family typewriter
+unsigned char i;
+\newline
+...
+
+\newline
+i >>= 4;
+\newline
+...
+\layout Standard
+
+generates the following code:
+\layout Verse
+
+
+\family typewriter
+mov\SpecialChar ~
+ a,_i
+\newline
+swap a
+\newline
+anl\SpecialChar ~
+ a,#0x0f
+\newline
+mov\SpecialChar ~
+ _i,a
+\layout Standard
+
+In general SDCC will never setup a loop if the shift count is known.
+ Another example:
+\layout Verse
+
+
+\family typewriter
+unsigned int i;
+\newline
+...
+
+\newline
+i >>= 9;
+\newline
+...
+\layout Standard
+
+will generate:
+\layout Verse
+
+
+\family typewriter
+mov\SpecialChar ~
+\SpecialChar ~
+a,(_i + 1)
+\newline
+mov\SpecialChar ~
+\SpecialChar ~
+(_i + 1),#0x00
+\newline
+clr\SpecialChar ~
+\SpecialChar ~
+c
+\newline
+rrc\SpecialChar ~
+\SpecialChar ~
+a
+\newline
+mov\SpecialChar ~
+\SpecialChar ~
+_i,a
+\layout Subsection
+
+Bit-rotation
+\begin_inset LatexCommand \index{Bit rotation}
+
+\end_inset
+
+
+\layout Standard
+
+A special case of the bit-shift operation is bit rotation
+\begin_inset LatexCommand \index{rotating bits}
+
+\end_inset
+
+, SDCC recognizes the following expression to be a left bit-rotation:
+\layout Verse
+
+
+\family typewriter
+\series bold
+unsigned
+\series default
+\SpecialChar ~
+\SpecialChar ~
+char i;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* unsigned is needed for rotation */
+\newline
+...
+
+\newline
+i = ((i << 1) | (i >> 7));
+\family default
+
+\newline
+
+\family typewriter
+...
+\layout Standard
+
+will generate the following code:
+\layout Verse
+
+
+\family typewriter
+mov\SpecialChar ~
+\SpecialChar ~
+a,_i
+\newline
+rl\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+a
+\newline
+mov\SpecialChar ~
+\SpecialChar ~
+_i,a
+\layout Standard
+
+SDCC uses pattern matching on the parse tree to determine this operation.Variatio
+ns of this case will also be recognized as bit-rotation, i.e.:
+\layout Verse
+
+
+\family typewriter
+i = ((i >> 7) | (i << 1)); /* left-bit rotation */
+\layout Subsection
+
+Nibble and Byte Swapping
+\layout Standard
+
+Other special cases of the bit-shift operations are nibble or byte swapping
+\begin_inset LatexCommand \index{swapping nibbles/bytes}
+
+\end_inset
+
+, SDCC recognizes the following expressions:
+\layout Verse
+
+
+\family typewriter
+\series bold
+unsigned
+\series default
+\SpecialChar ~
+\SpecialChar ~
+char i;
+\newline
+
+\series bold
+unsigned
+\series default
+\SpecialChar ~
+\SpecialChar ~
+int j;
+\newline
+...
+
+\newline
+i = ((i << 4) | (i >> 4));
+\family default
+
+\newline
+
+\family typewriter
+j = ((j << 8) | (j >> 8));
+\layout Standard
+
+and generates a swap instruction for the nibble swapping
+\begin_inset LatexCommand \index{Nibble swapping}
+
+\end_inset
+
+ or move instructions for the byte swapping
+\begin_inset LatexCommand \index{Byte swapping}
+
+\end_inset
+
+.
+ The
+\begin_inset Quotes sld
+\end_inset
+
+j
+\begin_inset Quotes srd
+\end_inset
+
+ example can be used to convert from little to big-endian or vice versa.
+ If you want to change the endianness of a
+\emph on
+signed
+\emph default
+ integer you have to cast to
+\family typewriter
+(unsigned int)
+\family default
+ first.
+\layout Standard
+
+Note that SDCC stores numbers in little-endian
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+Usually 8-bit processors don't care much about endianness.
+ This is not the case for the standard 8051 which only has an instruction
+ to increment its
+\emph on
+dptr
+\emph default
+
+\begin_inset LatexCommand \index{DPTR}
+
+\end_inset
+
+-datapointer
+\emph on
+
+\emph default
+so little-endian is the more efficient byte order.
+\end_inset
+
+
+\begin_inset LatexCommand \index{little-endian}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Endianness}
+
+\end_inset
+
+ format (i.e.
+ lowest order first).
+\layout Subsection
+
+Highest Order Bit
+\begin_inset LatexCommand \index{Highest Order Bit}
+
+\end_inset
+
+ / Any Order Bit
+\begin_inset LatexCommand \index{Any Order Bit}
+
+\end_inset
+
+
+\layout Standard
+
+It is frequently required to obtain the highest order bit of an integral
+ type (long, int, short or char types).
+ Also obtaining any other order bit is not uncommon.
+ SDCC recognizes the following expressions to yield the highest order bit
+ and generates optimized code for it, e.g.:
+\layout Verse
+
+
+\family typewriter
+unsigned int gint;
+\newline
+
+\newline
+foo () {
+\newline
+\SpecialChar ~
+\SpecialChar ~
+unsigned char hob1, aob1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+bit hob2, hob3, aob2, aob3;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+hob1 = (gint >> 15) & 1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+hob2 = (gint >> 15) & 1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+hob3 = gint & 0x8000;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+aob1 = (gint >> 9) & 1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+aob2 = (gint >> 8) & 1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+aob3 = gint & 0x0800;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+..
+
+\newline
+}
+\layout Standard
+
+will generate the following code:
+\layout Verse
+
+
+\family typewriter
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 61 ;\SpecialChar ~
+ hob.c 7
+\newline
+000A E5*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 62\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ a,(_gint + 1)
+\newline
+000C 23\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 63\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ rl\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ a
+\newline
+000D 54 01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 64\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ anl\SpecialChar ~
+\SpecialChar ~
+ a,#0x01
+\newline
+000F F5*02\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 65\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ _foo_hob1_1_1,a
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 66 ;\SpecialChar ~
+ hob.c 8
+\newline
+0011 E5*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 67\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ a,(_gint + 1)
+\newline
+0013 33\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 68\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ rlc\SpecialChar ~
+\SpecialChar ~
+ a
+\newline
+0014 92*00\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 69\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ _foo_hob2_1_1,c
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 66 ;\SpecialChar ~
+ hob.c 9
+\newline
+0016 E5*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 67\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ a,(_gint + 1)
+\newline
+0018 33\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 68\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ rlc\SpecialChar ~
+\SpecialChar ~
+ a
+\newline
+0019 92*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 69\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ _foo_hob3_1_1,c
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 70 ;\SpecialChar ~
+ hob.c 10
+\newline
+001B E5*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 71\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ a,(_gint + 1)
+\newline
+001D 03\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 72\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ rr\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ a
+\newline
+001E 54 01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 73\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ anl\SpecialChar ~
+\SpecialChar ~
+ a,#0x01
+\newline
+0020 F5*03\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 74\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ _foo_aob1_1_1,a
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 75 ;\SpecialChar ~
+ hob.c 11
+\newline
+0022 E5*01\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 76\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ mov\SpecialChar ~
+\SpecialChar ~
+ a,(_gint + 1)
+\newline
+0024 13\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ 77\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+ rrc\SpecialChar ~
+\SpecialChar ~
+ a