tcl: board: mini2440: fix to work with the current version

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 0df25406ffb886768e1de8c0958a265cc6a7f26c..fc86429d16f722884b2809b2b4bbc851f009357f 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -3292,66 +3292,12 @@ able to coexist nicely with both sysfs bitbanging and various
 peripherals' kernel drivers. The driver restores the previous
 configuration on exit.
 
 peripherals' kernel drivers. The driver restores the previous
 configuration on exit.
 

-GPIO numbers >= 32 can't be used for performance reasons.
+GPIO numbers >= 32 can't be used for performance reasons. GPIO configuration is
+handled by the generic command @ref{adapter gpio, @command{adapter gpio}}.

 
 See @file{interface/raspberrypi-native.cfg} for a sample config and
 pinout.
 
 
 See @file{interface/raspberrypi-native.cfg} for a sample config and
 pinout.
 

-@deffn {Config Command} {bcm2835gpio jtag_nums} @var{tck} @var{tms} @var{tdi} @var{tdo}
-Set JTAG transport GPIO numbers for TCK, TMS, TDI, and TDO (in that order).
-Must be specified to enable JTAG transport. These pins can also be specified
-individually.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio tck_num} @var{tck}
-Set TCK GPIO number. Must be specified to enable JTAG transport. Can also be
-specified using the configuration command @command{bcm2835gpio jtag_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio tms_num} @var{tms}
-Set TMS GPIO number. Must be specified to enable JTAG transport. Can also be
-specified using the configuration command @command{bcm2835gpio jtag_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio tdo_num} @var{tdo}
-Set TDO GPIO number. Must be specified to enable JTAG transport. Can also be
-specified using the configuration command @command{bcm2835gpio jtag_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio tdi_num} @var{tdi}
-Set TDI GPIO number. Must be specified to enable JTAG transport. Can also be
-specified using the configuration command @command{bcm2835gpio jtag_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio swd_nums} @var{swclk} @var{swdio}
-Set SWD transport GPIO numbers for SWCLK and SWDIO (in that order). Must be
-specified to enable SWD transport. These pins can also be specified individually.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio swclk_num} @var{swclk}
-Set SWCLK GPIO number. Must be specified to enable SWD transport. Can also be
-specified using the configuration command @command{bcm2835gpio swd_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio swdio_num} @var{swdio}
-Set SWDIO GPIO number. Must be specified to enable SWD transport. Can also be
-specified using the configuration command @command{bcm2835gpio swd_nums}.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio swdio_dir_num} @var{swdio} @var{dir}
-Set SWDIO direction control pin GPIO number. If specified, this pin can be used
-to control the direction of an external buffer on the SWDIO pin (set=output
-mode, clear=input mode). If not specified, this feature is disabled.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio srst_num} @var{srst}
-Set SRST GPIO number. Must be specified to enable SRST.
-@end deffn
-
-@deffn {Config Command} {bcm2835gpio trst_num} @var{trst}
-Set TRST GPIO number. Must be specified to enable TRST.
-@end deffn
-

 @deffn {Config Command} {bcm2835gpio speed_coeffs} @var{speed_coeff} @var{speed_offset}
 Set SPEED_COEFF and SPEED_OFFSET for delay calculations. If unspecified,
 speed_coeff defaults to 113714, and speed_offset defaults to 28.
 @deffn {Config Command} {bcm2835gpio speed_coeffs} @var{speed_coeff} @var{speed_offset}
 Set SPEED_COEFF and SPEED_OFFSET for delay calculations. If unspecified,
 speed_coeff defaults to 113714, and speed_offset defaults to 28.


@@ -7396,6 +7342,31 @@ flash bank $_FLASHNAME rp2040_flash $_FLASHBASE $_FLASHSIZE 1 32 $_TARGETNAME
 @end example
 @end deffn
 
 @end example
 @end deffn
 

+@deffn {Flash Driver} {rsl10}
+Supports Onsemi RSL10 microcontroller flash memory.  Uses functions
+stored in ROM to control flash memory interface.
+
+@example
+flash bank $_FLASHNAME rsl10 $_FLASHBASE $_FLASHSIZE 0 0 $_TARGETNAME
+@end example
+
+@deffn {Command} {rsl10 lock} key1 key2 key3 key4
+Writes @var{key1 key2 key3 key4} words to @var{0x81044 0x81048 0x8104c
+0x8050}. Locks debug port by writing @var{0x4C6F634B} to @var{0x81040}.
+
+To unlock use the @command{rsl10 unlock key1 key2 key3 key4} command.
+@end deffn
+
+@deffn {Command} {rsl10 unlock} key1 key2 key3 key4
+Unlocks debug port, by writing @var{key1 key2 key3 key4} words to
+registers through DAP, and clears @var{0x81040} address in flash to 0x1.
+@end deffn
+
+@deffn {Command} {rsl10 mass_erase}
+Erases all unprotected flash sectors.
+@end deffn
+@end deffn
+

 @deffn {Flash Driver} {sim3x}
 All members of the SiM3 microcontroller family from Silicon Laboratories
 include internal flash and use ARM Cortex-M3 cores. It supports both JTAG
 @deffn {Flash Driver} {sim3x}
 All members of the SiM3 microcontroller family from Silicon Laboratories
 include internal flash and use ARM Cortex-M3 cores. It supports both JTAG