+/* not all devices use P2 to page pdata memory, therefore __XPAGE was
+ introduced. On some targets __XPAGE itself is a paged SFR so it is
+ not safe for all platforms to set this. Furthermore some targets
+ can be configured to behave differently for movx @dptr vs. movx @Ri
+ (don't drive high byte of address bus for movx @Ri only) */
+#define USE_PDATA_PAGING_REGISTER 0
+
+__sbit __at (0xF7) B_7;
+__sbit __at (0xF6) B_6;
+__sbit __at (0xF5) B_5;
+
+/* the return value is expected to be in acc, and not in the standard
+ * location dpl. Therefore we choose return type void here: */
+#if defined DSDCC_MODEL_HUGE
+void
+_gptrget (char *gptr) __naked
+{
+/* This is the banked version with pointers up to 23 bits.
+ B cannot be trashed */
+
+ gptr; /* hush the compiler */
+
+ __asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov dph,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ dataptrrestore$:
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to external stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ sjmp dataptrrestore$ ; 2
+ ;
+ ; pointer to code area
+ ;
+ codeptr$:
+ ; implementation for SiLabs C8051F12x
+ mov a,b ; 2
+ anl a,#0x03 ; 2
+ swap a ; 1
+ push _PSBANK ; 2
+ anl _PSBANK,#0x0F ; 3
+ orl _PSBANK,a ; 2
+
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ pop _PSBANK ; 2
+ ret ; 1
+ ;
+ ; pointer to xternal data
+ ;
+ xdataptr$:
+ ; implementation for xram a16-a21 tied to P3
+ mov _P3,b ; 3
+
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;44 bytes
+ __endasm;
+}
+
+#elif defined DSDCC_MODEL_MEDIUM
+
+void
+_gptrget (char *gptr) __naked
+{
+/* This is the non-banked version with pointers up to 15 bits.
+ Assumes B is free to be used */
+
+ gptr; /* hush the compiler */
+
+ __asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ mov b,dph ; 3
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov b,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ mov r0,b ; restore r0 ; 2
+ ret ; 1
+ ;
+ ; pointer to xternal stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ mov r0,b ; restore r0 ; 2
+ ret ; 1
+ ;
+ ; pointer to code area, max 15 bits
+ ;
+ codeptr$:
+ ; 0x8000 <= dptr <= 0xFFFF
+ ; no need to AND dph and restore from B if hardware wraps code memory
+ anl dph,#0x7F ; 3
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ mov dph,b ; 3
+ ret ; 1
+ ;
+ ; pointer to xternal data, max 14 bits
+ ;
+ xdataptr$:
+ ; 0 <= dptr <= 0x3FFF
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;35 bytes
+ __endasm;
+}
+
+#else
+
+void
+_gptrget (char *gptr) __naked
+{
+/* This is the new version with pointers up to 16 bits.
+ B cannot be trashed */
+
+ gptr; /* hush the compiler */
+
+ __asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov dph,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ dataptrrestore$:
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to xternal stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ sjmp dataptrrestore$ ; 2
+ ;
+ ; pointer to code area, max 16 bits
+ ;
+ codeptr$:
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ ret ; 1
+ ;
+ ; pointer to xternal data, max 16 bits
+ ;
+ xdataptr$:
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;27 bytes
+ __endasm;
+}
+
+#endif
+
+#ifdef SDCC_ds390
+/* the return value is expected to be in acc/_ap, and not in the standard
+ * location dpl/dph. Therefore we choose return type void here: */
+
+void
+_gptrgetWord (unsigned *gptr)