add VCT6 support (chip_id 0x427) based on upstream patch by Burns

[fw/stlink] / README

diff --git a/README b/README
index 470c52a5977741d648e0660201dd417efe74116b..bb06f60a96bf236dd3b3364271d6034d7b3639e1 100644 (file)
--- a/README
+++ b/README
@@ -14,8 +14,9 @@ called stlink and there are 2 versions:
 Common requirements
 ~~~~~~~~~~~~~~~~~~~
 
 Common requirements
 ~~~~~~~~~~~~~~~~~~~
 

-libusb-1.0  (You probably already have this, but you'll need the 
+. libusb-1.0  (You probably already have this, but you'll need the

 development version to compile)
 development version to compile)

+. pkg-config

 
 IF YOU HAVE AN STLINKv1
 ~~~~~~~~~~~~~~~~~~~~~~~
 
 IF YOU HAVE AN STLINKv1
 ~~~~~~~~~~~~~~~~~~~~~~~


@@ -102,6 +103,7 @@ If you would link your executable to 0x08000000 and then do
 (gdb) load firmware.elf
 then it would be written to the memory.
 
 (gdb) load firmware.elf
 then it would be written to the memory.
 

+

 FAQ
 ===
 
 FAQ
 ===
 


@@ -119,3 +121,26 @@ Q: At some point I use GDB command `next', and it hangs.
 A: Sometimes when you will try to use GDB `next' command to skip a loop,
 it will use a rather inefficient single-stepping way of doing that.
 Set up a breakpoint manually in that case and do `continue'.
 A: Sometimes when you will try to use GDB `next' command to skip a loop,
 it will use a rather inefficient single-stepping way of doing that.
 Set up a breakpoint manually in that case and do `continue'.

+
+Currently known working combinations of programmer and target
+=============================================================
+
+STLink v1 (as found on the 32VL Discovery board)
+
+Known Working Targets:
+* STM32F100xx (Medium Density VL)
+* STM32F103 (according to jpa- on ##stm32)
+
+No information:
+* everything else!
+
+STLink v2 (as found on the 32L and F4 Discovery boards)
+Known Working Targets:
+* STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
+* STM32L1xx (STM32L Discovery board)
+* STM32F107RC, STM32L151RB, STM32F205RE and  STM32F405RE  on a custom boards 
+  (https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
+* STM32F407xx (STM32F4 Discovery board)
+
+Please report any and all known working combinations so I can update this!
+