cortex_a: remove ahb support for phys_memory access

[fw/openocd] / README

diff --git a/README b/README
index 287cc922f5494399e849a9486fbac194b2f65666..8f98e7fac76c8d7e66535976dc18450dc09232b4 100644 (file)
--- a/README
+++ b/README
@@ -39,7 +39,11 @@ If you are connecting a particular adapter with some specific target,
 you need to source both the jtag interface and the target configs,
 e.g.:
 
 you need to source both the jtag interface and the target configs,
 e.g.:
 

-  openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg
+  openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
+          -f target/ti_calypso.cfg
+
+  openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+          -f target/stm32l0.cfg

 
 NB: when using an FTDI-based adapter you should prefer configs in the
 ftdi directory; the old configs for the ft2232 are deprecated.
 
 NB: when using an FTDI-based adapter you should prefer configs in the
 ftdi directory; the old configs for the ft2232 are deprecated.


@@ -57,10 +61,10 @@ In addition to the in-tree documentation, the latest manuals may be
 viewed online at the following URLs:
 
   OpenOCD User's Guide:
 viewed online at the following URLs:
 
   OpenOCD User's Guide:

-    http://openocd.sourceforge.net/doc/html/index.html
+    http://openocd.org/doc/html/index.html

 
   OpenOCD Developer's Manual:
 
   OpenOCD Developer's Manual:

-    http://openocd.sourceforge.net/doc/doxygen/html/index.html
+    http://openocd.org/doc/doxygen/html/index.html

 
 These reflect the latest development versions, so the following section
 introduces how to build the complete documentation from the package.
 
 These reflect the latest development versions, so the following section
 introduces how to build the complete documentation from the package.


@@ -102,12 +106,12 @@ JTAG adapters
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
 BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
 BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,

-DLC 5, DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG,
-Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, ICEBear, J-Link, JTAG
-VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L,
-LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, OpenJTAG,
-Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug devkit,
-Stellaris evkits, ST-LINK (SWO tracing supported),
+Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick,
+FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI,
+ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link,
+Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous,
+OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug
+devkit, Stellaris evkits, ST-LINK (SWO tracing supported),

 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.
 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.


@@ -123,9 +127,10 @@ Flash drivers
 -------------
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
 -------------
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,

-LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, Stellaris,
-STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180,
-LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
+LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
+Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
+STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
+i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC4xxx.

 
 
 ==================
 
 
 ==================


@@ -237,8 +242,8 @@ Permissions delegation
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 

-For USB devices on GNU/Linux you should use the contrib/openocd.udev
-rules file. It probably belongs somewhere in /etc/udev/rules.d, but
+For USB devices on GNU/Linux you should use the contrib/99-openocd.rules
+file. It probably belongs somewhere in /etc/udev/rules.d, but

 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.
 
 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.