+Running programs from SRAM
+==========================
+
+You can run your firmware directly from SRAM if you want to.
+Just link it at 0x20000000 and do
+(gdb) load firmware.elf
+
+It will be loaded, and pc will be adjusted to point to start of the
+code, if it is linked correctly (i.e. ELF has correct entry point).
+
+Writing to flash
+================
+
+The GDB stub ships with a correct memory map, including the flash area.
+If you would link your executable to 0x08000000 and then do
+(gdb) load firmware.elf
+then it would be written to the memory.
+