stlink: stlink_interface_init_target use hex prefix

[fw/openocd] / NEWS

diff --git a/NEWS b/NEWS
index a5a5401dad78548e96d81122ce3d3c2632411165..023f22b93fbc259246318965e26bc1cb59ec557f 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,54 +1,51 @@
-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release.  See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the
+OpenOCD  source archive release.  See the
+repository history for details about what changed, including
+bugfixes and other issues not mentioned here.

 
 JTAG Layer:
 
 JTAG Layer:

-    FT2232H (high speed USB) support doesn't need separate configuration
-    New reset_config options for SRST gating the JTAG clock (or not)
-    TAP declaration no longer requires ircapture and mask attributes
-    New "post-reset" event handler for TAP-invariant setup code
+       New STLINK V1/V2 JTAG/SWD adapter support.
+       New OSJTAG adapter support.
+       New Tincantools Flyswatter2 support.
+       Improved ULINK driver.
+       Improved RLINK driver.
+
+Boundary Scan:

 
 Target Layer:
 
 Target Layer:

-    New commands for use with Cortex-M3 processors:
-       "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
-       "cortex_m3 vector_catch" ... traps certain hardware faults
-               without tying up breakpoint resources
-    If you're willing to help debug it
-       VERY EARLY Cortex-A8 and ARMv7A support
-       Updated BeagleBoard.org hardware support
-    New commands for use with XScale processors: "xscale vector_table"
-    ARM11
-       single stepping support for i.MX31
-       bugfix for missing "arm11" prefix on "arm11 memwrite ..."
-    ETM support
-       Unavailable registers are not listed
+       New Cortex-M0 support.
+       New Cortex-M4 support.
+       Improved Working area algorithm.
+       New RTOS support. Currently linux, FreeRTOS, ThreadX and eCos.

 
 Flash Layer:
 
 Flash Layer:

-    The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
-    New lpc2900 driver for NXP LPC2900 chips (ARM968 based)
-    New "last" flag for NOR "flash erase_sector" and "flash protect"
-    The "nand erase N" command now erases all of bank N
+       New SST39WF1601 support.
+       New EN29LV800BB support.
+       New async algorithm support for selected targets, stm32, stellaris and pic32.
+       New Atmel SAM3S, SAM3N support.
+       New ST STM32L support.
+       New Microchip PIC32MX1xx/2xx support.
+       New Freescale Kinetis K40 support.

 
 Board, Target, and Interface Configuration Scripts:
 
 Board, Target, and Interface Configuration Scripts:

-    Amontec JTAGkey2 support
-    Cleanup and additions for the TI/Luminary Stellaris scripts
-    LPC1768 target (and flash) support
-       Keil MCB1700 eval board
-    Samsung s3c2450
-       Mini2440 board
-    Numeric TAP and Target identifiers now trigger warnings
+       Support Dangerous Prototypes Bus Blaster.
+       Support ST SPEAr Family.
+       Support Gumstix Verdex boards.
+       Support TI Beaglebone.

 
 Documentation:
 
 Documentation:

-    Capture more debugging and setup advice
-    Notes on target source code changes that may help debugging
+       Improved HACKING info for submitting patches.
+       Fixed numerous broken links.

 
 Build and Release:
 
 For more details about what has changed since the last release,
 
 Build and Release:
 
 For more details about what has changed since the last release,

-see the ChangeLog associated with this source archive.  For older NEWS,
-see the NEWS files associated with each release (i.e. NEWS-<version>).
+see the git repository history.  With gitweb, you can browse that
+in various levels of detail.
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).

 
 For more information about contributing test reports, bug fixes, or new
 features and device support, please read the new Developer Manual (or
 
 For more information about contributing test reports, bug fixes, or new
 features and device support, please read the new Developer Manual (or

-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).