* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
static int stm32lx_erase_sector(struct flash_bank *bank, int sector);
static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank);
-struct stm32lx_flash_bank
-{
- struct working_area *write_algorithm;
+struct stm32lx_flash_bank {
int probed;
};
{
struct stm32lx_flash_bank *stm32lx_info;
if (CMD_ARGC < 6)
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
- // Create the bank structure
+ /* Create the bank structure */
stm32lx_info = malloc(sizeof(struct stm32lx_flash_bank));
- // Check allocation
- if (stm32lx_info == NULL)
- {
+ /* Check allocation */
+ if (stm32lx_info == NULL) {
LOG_ERROR("failed to allocate bank structure");
return ERROR_FAIL;
}
bank->driver_priv = stm32lx_info;
- stm32lx_info->write_algorithm = NULL;
stm32lx_info->probed = 0;
return ERROR_OK;
uint32_t wrpr;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (retval != ERROR_OK)
return retval;
- for (int i = 0; i < 32; i++)
- {
+ for (int i = 0; i < 32; i++) {
if (wrpr & (1 << i))
- {
bank->sectors[i].is_protected = 1;
- }
else
- {
bank->sectors[i].is_protected = 0;
- }
}
return ERROR_OK;
}
* erased, but it is not implemented yet.
*/
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/*
* Loop over the selected sectors and erase them
*/
- for (int i = first; i <= last; i++)
- {
+ for (int i = first; i <= last; i++) {
retval = stm32lx_erase_sector(bank, i);
if (retval != ERROR_OK)
return retval;
static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
- struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 4096 * 4;
+ struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
/* see contib/loaders/flash/stm32lx.s for src */
- static const uint16_t stm32lx_flash_write_code_16[] =
- {
- // 00000000 <write_word-0x4>:
- 0x2300, // 0: 2300 movs r3, #0
- 0xe004, // 2: e004 b.n e <test_done>
+ static const uint16_t stm32lx_flash_write_code_16[] = {
+ /* 00000000 <write_word-0x4>: */
+ 0x2300, /* 0: 2300 movs r3, #0 */
+ 0xe004, /* 2: e004 b.n e <test_done> */
- // 00000004 <write_word>:
- 0xf851, 0xcb04, // 4: f851 cb04 ldr.w ip, [r1], #4
- 0xf840, 0xcb04, // 8: f840 cb04 str.w ip, [r0], #4
- 0x3301, // c: 3301 adds r3, #1
+ /* 00000004 <write_word>: */
+ 0xf851, 0xcb04, /* 4: f851 cb04 ldr.w ip, [r1], #4 */
+ 0xf840, 0xcb04, /* 8: f840 cb04 str.w ip, [r0], #4 */
+ 0x3301, /* c: 3301 adds r3, #1 */
- // 0000000e <test_done>:
- 0x4293, // e: 4293 cmp r3, r2
- 0xd3f8, // 10: d3f8 bcc.n 4 <write_word>
- 0xbe00, // 12: be00 bkpt 0x0000
+ /* 0000000e <test_done>: */
+ 0x4293, /* e: 4293 cmp r3, r2 */
+ 0xd3f8, /* 10: d3f8 bcc.n 4 <write_word> */
+ 0xbe00, /* 12: be00 bkpt 0x0000 */
};
- // Flip endian
+ /* Flip endian */
uint8_t stm32lx_flash_write_code[sizeof(stm32lx_flash_write_code_16)];
- for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++)
- {
+ for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++) {
stm32lx_flash_write_code[i * 2 + 0] = stm32lx_flash_write_code_16[i]
& 0xff;
stm32lx_flash_write_code[i * 2 + 1] = (stm32lx_flash_write_code_16[i]
>> 8) & 0xff;
}
- // Check if there is an even number of half pages (128bytes)
- if (count % 128)
- {
+ /* Check if there is an even number of half pages (128bytes) */
+ if (count % 128) {
LOG_ERROR("there should be an even number "
"of half pages = 128 bytes (count = %" PRIi32 " bytes)", count);
return ERROR_FAIL;
}
- // Allocate working area
+ /* Allocate working area */
reg32 = sizeof(stm32lx_flash_write_code);
- // Add bytes to make 4byte aligned
+ /* Add bytes to make 4byte aligned */
reg32 += (4 - (reg32 % 4)) % 4;
retval = target_alloc_working_area(target, reg32,
- &stm32lx_info->write_algorithm);
+ &write_algorithm);
if (retval != ERROR_OK)
return retval;
- // Write the flashing code
+ /* Write the flashing code */
retval = target_write_buffer(target,
- stm32lx_info->write_algorithm->address,
+ write_algorithm->address,
sizeof(stm32lx_flash_write_code),
- (uint8_t*) stm32lx_flash_write_code);
- if (retval != ERROR_OK)
- {
- target_free_working_area(target, stm32lx_info->write_algorithm);
+ (uint8_t *)stm32lx_flash_write_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
return retval;
}
- // Allocate half pages memory
+ /* Allocate half pages memory */
while (target_alloc_working_area_try(target, buffer_size, &source)
- != ERROR_OK)
- {
+ != ERROR_OK) {
if (buffer_size > 1024)
buffer_size -= 1024;
else
buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a
+ if (buffer_size <= 256) {
+ /* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
- if (stm32lx_info->write_algorithm)
- target_free_working_area(target, stm32lx_info->write_algorithm);
+ target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT);
init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
- // Enable half-page write
+ /* Enable half-page write */
retval = stm32lx_enable_write_half_page(bank);
- if (retval != ERROR_OK)
- {
-
+ if (retval != ERROR_OK) {
target_free_working_area(target, source);
- target_free_working_area(target, stm32lx_info->write_algorithm);
+ target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
-
return retval;
}
- // Loop while there are bytes to write
- while (count > 0)
- {
+ /* Loop while there are bytes to write */
+ while (count > 0) {
uint32_t this_count;
this_count = (count > buffer_size) ? buffer_size : count;
- // Write the next half pages
+ /* Write the next half pages */
retval = target_write_buffer(target, source->address, this_count,
buffer);
if (retval != ERROR_OK)
break;
- // 4: Store useful information in the registers
- // the destination address of the copy (R0)
+ /* 4: Store useful information in the registers */
+ /* the destination address of the copy (R0) */
buf_set_u32(reg_params[0].value, 0, 32, address);
- // The source address of the copy (R1)
+ /* The source address of the copy (R1) */
buf_set_u32(reg_params[1].value, 0, 32, source->address);
- // The length of the copy (R2)
+ /* The length of the copy (R2) */
buf_set_u32(reg_params[2].value, 0, 32, this_count / 4);
- // 5: Execute the bunch of code
+ /* 5: Execute the bunch of code */
retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params)
/ sizeof(*reg_params), reg_params,
- stm32lx_info->write_algorithm->address, 0, 20000, &armv7m_info);
+ write_algorithm->address, 0, 20000, &armv7m_info);
if (retval != ERROR_OK)
break;
- // 6: Wait while busy
+ /* 6: Wait while busy */
retval = stm32lx_wait_until_bsy_clear(bank);
if (retval != ERROR_OK)
break;
retval = stm32lx_lock_program_memory(bank);
target_free_working_area(target, source);
- target_free_working_area(target, stm32lx_info->write_algorithm);
+ target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
uint32_t bytes_written = 0;
int retval;
- if (bank->target->state != TARGET_HALTED)
- {
+ uint8_t *start = buffer;
+ uint32_t start_address = address;
+ uint32_t start_count = count;
+ uint8_t *validate;
+ uint32_t check;
+
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (offset & 0x1)
- {
+ if (offset & 0x1) {
LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
- // Check if there are some full half pages
- if (((offset % 128) == 0) && (count >= 128))
- {
+ /* Check if there are some full half pages */
+ if (((offset % 128) == 0) && (count >= 128)) {
halfpages_number = count / 128;
words_remaining = (count - 128 * halfpages_number) / 4;
bytes_remaining = (count & 0x3);
- }
- else
- {
+ } else {
halfpages_number = 0;
words_remaining = (count / 4);
bytes_remaining = (count & 0x3);
}
- if (halfpages_number)
- {
+ if (halfpages_number) {
retval = stm32lx_write_half_pages(bank, buffer, offset, 128
* halfpages_number);
if (retval != ERROR_OK)
}
bytes_written = 128 * halfpages_number;
+ address += bytes_written;
retval = stm32lx_unlock_program_memory(bank);
if (retval != ERROR_OK)
return retval;
- while (words_remaining > 0)
- {
+ while (words_remaining > 0) {
uint32_t value;
- uint8_t* p = buffer + bytes_written;
+ uint8_t *p = buffer + bytes_written;
- // Prepare the word, Little endian conversion
+ /* Prepare the word, Little endian conversion */
value = p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24);
retval = target_write_u32(target, address, value);
return retval;
}
- if (bytes_remaining)
- {
+ if (bytes_remaining) {
uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff};
/* copy the last remaining bytes into the write buffer */
if (retval != ERROR_OK)
return retval;
- return ERROR_OK;
+ validate = malloc (start_count);
+
+ retval = target_read_buffer(target, start_address, start_count, validate);
+ if (retval != ERROR_OK) {
+ free (validate);
+ return retval;
+ }
+
+ for (check = 0; check < start_count; check++) {
+ if (validate[check] != start[check]) {
+ LOG_ERROR ("flash corrupted at 0x%08x (%02x != %02x)\n",
+ start_address + check, start[check], validate[check]);
+ retval = ERROR_FAIL;
+ break;
+ }
+ }
+
+ free (validate);
+
+ return retval;
}
static int stm32lx_probe(struct flash_bank *bank)
struct target *target = bank->target;
struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv;
int i;
- uint16_t flash_size;
+ uint16_t flash_size_in_kb;
+ uint16_t max_flash_size_in_kb;
uint32_t device_id;
- uint32_t reg32;
stm32lx_info->probed = 0;
LOG_DEBUG("device id = 0x%08" PRIx32 "", device_id);
- if ((device_id & 0x7ff) != 0x416)
- {
+ /* set max flash size depending on family */
+ switch (device_id & 0xfff) {
+ case 0x416:
+ max_flash_size_in_kb = 128;
+ break;
+ case 0x436:
+ max_flash_size_in_kb = 384;
+ break;
+ default:
LOG_WARNING("Cannot identify target as a STM32L family.");
return ERROR_FAIL;
}
- // Read the RDP byte and check if it is 0xAA
- uint8_t rdp;
- retval = target_read_u32(target, FLASH_OBR, ®32);
- if (retval != ERROR_OK)
- return retval;
- rdp = reg32 & 0xFF;
- if (rdp != 0xAA)
- {
- /*
- * Unlocking the option byte is done by unlocking the PECR, then
- * by writing the 2 option byte keys to OPTKEYR
- */
-
- /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */
- retval = target_write_u32(target, FLASH_PEKEYR, PEKEY1);
- if (retval != ERROR_OK)
- return retval;
-
- retval = target_write_u32(target, FLASH_PEKEYR, PEKEY2);
- if (retval != ERROR_OK)
- return retval;
-
- /* Make sure it worked */
- retval = target_read_u32(target, FLASH_PECR, ®32);
- if (retval != ERROR_OK)
- return retval;
-
- if (reg32 & FLASH_PECR__PELOCK)
- return ERROR_FLASH_OPERATION_FAILED;
-
- retval = target_write_u32(target, FLASH_OPTKEYR, OPTKEY1);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u32(target, FLASH_OPTKEYR, OPTKEY2);
- if (retval != ERROR_OK)
- return retval;
-
- retval = target_read_u32(target, FLASH_PECR, ®32);
- if (retval != ERROR_OK)
- return retval;
-
- if (reg32 & FLASH_PECR__OPTLOCK)
- {
- LOG_ERROR("OPTLOCK is not cleared");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- // Then, write RDP to 0x00 to set level 1
- reg32 = ((~0xAA) << 16) | (0xAA);
- retval = target_write_u32(target, OB_RDP, reg32);
- if (retval != ERROR_OK)
- return retval;
-
- // Set Automatic update of the option byte, by setting OBL_LAUNCH in FLASH_PECR
- reg32 = FLASH_PECR__OBL_LAUNCH;
- retval = target_write_u32(target, FLASH_PECR, reg32);
- if (retval != ERROR_OK)
- return retval;
- }
-
/* get flash size from target. */
- retval = target_read_u16(target, F_SIZE, &flash_size);
- if (retval != ERROR_OK)
- return retval;
+ retval = target_read_u16(target, F_SIZE, &flash_size_in_kb);
- /* check for valid flash size */
- if (flash_size == 0xffff)
- {
- /* number of sectors incorrect on revA */
- LOG_ERROR("STM32 flash size failed, probe inaccurate");
- return ERROR_FAIL;
+ /* failed reading flash size or flash size invalid (early silicon),
+ * default to max target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
}
/* STM32L - we have 32 sectors, 16 pages per sector -> 512 pages
* 16 pages for a protection area */
/* calculate numbers of sectors (4kB per sector) */
- int num_sectors = (flash_size * 1024) / FLASH_SECTOR_SIZE;
- LOG_INFO("flash size = %dkbytes", flash_size);
+ int num_sectors = (flash_size_in_kb * 1024) / FLASH_SECTOR_SIZE;
+ LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
- if (bank->sectors)
- {
+ if (bank->sectors) {
free(bank->sectors);
bank->sectors = NULL;
}
bank->base = FLASH_BANK0_ADDRESS;
- bank->size = flash_size * 1024;
+ bank->size = flash_size_in_kb * 1024;
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- if (bank->sectors == NULL)
- {
+ if (bank->sectors == NULL) {
LOG_ERROR("failed to allocate bank sectors");
return ERROR_FAIL;
}
- for (i = 0; i < num_sectors; i++)
- {
+ for (i = 0; i < num_sectors; i++) {
bank->sectors[i].offset = i * FLASH_SECTOR_SIZE;
bank->sectors[i].size = FLASH_SECTOR_SIZE;
bank->sectors[i].is_erased = -1;
struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv;
if (stm32lx_info->probed)
- {
return ERROR_OK;
- }
return stm32lx_probe(bank);
}
uint32_t nBytes;
int retval = ERROR_OK;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
uint8_t *buffer = malloc(buffer_size);
- if (buffer == NULL)
- {
+ if (buffer == NULL) {
LOG_ERROR("failed to allocate read buffer");
return ERROR_FAIL;
}
- for (i = 0; i < bank->num_sectors; i++)
- {
+ for (i = 0; i < bank->num_sectors; i++) {
uint32_t j;
bank->sectors[i].is_erased = 1;
- // Loop chunk by chunk over the sector
- for (j = 0; j < bank->sectors[i].size; j += buffer_size)
- {
+ /* Loop chunk by chunk over the sector */
+ for (j = 0; j < bank->sectors[i].size; j += buffer_size) {
uint32_t chunk;
chunk = buffer_size;
if (chunk > (j - bank->sectors[i].size))
- {
chunk = (j - bank->sectors[i].size);
- }
retval = target_read_memory(target, bank->base
+ bank->sectors[i].offset + j, 4, chunk / 4, buffer);
if (retval != ERROR_OK)
break;
- for (nBytes = 0; nBytes < chunk; nBytes++)
- {
- if (buffer[nBytes] != 0x00)
- {
+ for (nBytes = 0; nBytes < chunk; nBytes++) {
+ if (buffer[nBytes] != 0x00) {
bank->sectors[i].is_erased = 0;
break;
}
}
}
if (retval != ERROR_OK)
- {
break;
- }
}
free(buffer);
return retval;
}
+
static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size)
{
- // This method must return a string displaying information about the bank
+ /* This method must return a string displaying information about the bank */
struct target *target = bank->target;
uint32_t device_id;
if (retval != ERROR_OK)
return retval;
- if ((device_id & 0x7ff) == 0x416)
- {
+ if ((device_id & 0xfff) == 0x416) {
printed = snprintf(buf, buf_size, "stm32lx - Rev: ");
buf += printed;
buf_size -= printed;
- switch (device_id >> 16)
- {
+ switch (device_id >> 16) {
case 0x1000:
snprintf(buf, buf_size, "A");
break;
case 0x1008:
snprintf(buf, buf_size, "Y");
break;
+
+ case 0x1018:
+ snprintf(buf, buf_size, "X");
+ break;
+
+ case 0x1038:
+ snprintf(buf, buf_size, "W");
+ break;
+
+ case 0x1078:
+ snprintf(buf, buf_size, "V");
+ break;
+
default:
snprintf(buf, buf_size, "unknown");
break;
}
- }
- else
- {
+ } else if ((device_id & 0xfff) == 0x436) {
+ printed = snprintf(buf, buf_size, "stm32lx (HD) - Rev: ");
+ buf += printed;
+ buf_size -= printed;
+
+ switch (device_id >> 16) {
+ case 0x1000:
+ snprintf(buf, buf_size, "A");
+ break;
+
+ case 0x1008:
+ snprintf(buf, buf_size, "Z");
+ break;
+
+ default:
+ snprintf(buf, buf_size, "unknown");
+ break;
+ }
+ } else {
snprintf(buf, buf_size, "Cannot identify target as a stm32lx");
return ERROR_FAIL;
}
return ERROR_OK;
}
-static const struct command_registration stm32lx_exec_command_handlers[] =
-{
+static const struct command_registration stm32lx_exec_command_handlers[] = {
COMMAND_REGISTRATION_DONE
};
-static const struct command_registration stm32lx_command_handlers[] =
-{
+static const struct command_registration stm32lx_command_handlers[] = {
{
.name = "stm32lx",
.mode = COMMAND_ANY,
.help = "stm32lx flash command group",
+ .usage = "",
.chain = stm32lx_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
};
-struct flash_driver stm32lx_flash =
-{
+struct flash_driver stm32lx_flash = {
.name = "stm32lx",
.commands = stm32lx_command_handlers,
.flash_bank_command = stm32lx_flash_bank_command,
.info = stm32lx_get_info,
};
-// Static methods implementation
-
+/* Static methods implementation */
static int stm32lx_unlock_program_memory(struct flash_bank *bank)
{
struct target *target = bank->target;
if (retval != ERROR_OK)
return retval;
- if (reg32 & FLASH_PECR__PELOCK)
- {
+ if (reg32 & FLASH_PECR__PELOCK) {
LOG_ERROR("PELOCK is not cleared :(");
return ERROR_FLASH_OPERATION_FAILED;
}
if (retval != ERROR_OK)
return retval;
- if (reg32 & FLASH_PECR__PRGLOCK)
- {
+ if (reg32 & FLASH_PECR__PRGLOCK) {
LOG_ERROR("PRGLOCK is not cleared :(");
return ERROR_FLASH_OPERATION_FAILED;
}
if (retval != ERROR_OK)
return retval;
- for (int page = 0; page < FLASH_PAGES_PER_SECTOR; page++)
- {
+ for (int page = 0; page < FLASH_PAGES_PER_SECTOR; page++) {
reg32 = FLASH_PECR__PROG | FLASH_PECR__ERASE;
retval = target_write_u32(target, FLASH_PECR, reg32);
if (retval != ERROR_OK)
int timeout = 100;
/* wait for busy to clear */
- for (;;)
- {
+ for (;;) {
retval = target_read_u32(target, FLASH_SR, &status);
if (retval != ERROR_OK)
return retval;
if ((status & FLASH_SR__BSY) == 0)
- {
break;
- }
- if (timeout-- <= 0)
- {
+ if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
- if (status & FLASH_SR__WRPERR)
- {
+ if (status & FLASH_SR__WRPERR) {
LOG_ERROR("access denied / write protected");
retval = ERROR_FAIL;
}
- if (status & FLASH_SR__PGAERR)
- {
+ if (status & FLASH_SR__PGAERR) {
LOG_ERROR("invalid program address");
retval = ERROR_FAIL;
}