Hi Laura, Kim,

This is a request for quote on raw boards and partial turnkey assembly of
TeleFire 1.0 and TeleLCO 1.0. We're planning on running this pair of
products through 'kickstarter', which means we would set a minimum order
size, but the order could end up larger than that. I think we'll need to
have quotes for 10, 25, 50 of each board to help set the pricing in
the campaign.

Kim, like some of our other products, this one has a notch in one side to 
allow a micro USB connector to overhang the board edge.  As a result, these
need to be tab-routed.  We have no discussed optimal panelization for a board
of this geometry before, so please let me know what a good arrangement would
be if we want to build these in lots of 100'ish.  My latest FreeDFM run 
resulted in quote 3956159. We'll want to run these in standard spec with
the cheapest option which I think is 5 days.

Laura, the new BOM is attached, and the XYRS data is in the
telefire.xy and telelco.xy files in the zips.  As usual will provide
some hard to find parts and want you to turnkey the rest.  We're quite
cost sensitive for these, so whatever the cheapest assembly turn
should be fine.

From the standard data request for assembly quotes:

     Company Name:              Altus Metrum, LLC

     Contact Name:              Keith Packard

     Phone:                     503 245 6878

     Part Number:               TeleFire and TeleLCO

     Revision:                  both 1.0

     How many to assemble:      10, 25 or 50

     PCB dimensions:            TeleFire is 4.00 x 4.00.
			        TeleLCO is 4.50  x 3.75

     How parts acquired:        partial turnkey

				  I will provide J3 for TeleFire and
				  J5 for TeleLCO

     Parts both sides?:         no 
					all SMT is on one side, and 
					all TH parts are no-loads

     ROHS?:                     no

     ITAR?:                     no 

Assembly notes:

	None.

Please let me know if I've forgotten anything, and thanks in advance for
your help!

Keith