#
# Spanish base translation file
#
# Translated by Tripoli Spain
! Set to the name of the current translation file (used for debugging purposes)
debug.currentFile = messages.properties
! RocketActions
RocketActions.checkbox.Donotaskmeagain = Do not ask me again
RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
RocketActions.showConfirmDialog.lbl2 = This operation cannot be undone.
RocketActions.showConfirmDialog.title = Delete simulations
RocketActions.DelCompAct.Delete = Delete
RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
RocketActions.DelSimuAct.Delete = Delete
RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
RocketActions.DelAct.Delete = Delete
RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
RocketActions.CutAction.Cut = Cut
RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
RocketActions.CopyAct.Copy = Copy
RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
RocketActions.PasteAct.Paste = Paste
RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
RocketActions.EditAct.Edit = Edit
RocketActions.EditAct.ttip.Edit = Edit the selected component.
RocketActions.NewStageAct.Newstage = New stage
RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
RocketActions.ActBoosterstage = Booster stage
RocketActions.MoveUpAct.Moveup = Move up
RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
RocketActions.MoveDownAct.Movedown = Move down
RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
! RocketPanel
RocketPanel.FigTypeAct.Sideview = Side view
RocketPanel.FigTypeAct.ttip.Sideview = Side view
RocketPanel.FigTypeAct.Backview = Back view
RocketPanel.FigTypeAct.ttip.Backview = Rear view
RocketPanel.lbl.Motorcfg = Motor configuration:
RocketPanel.lbl.infoMessage = Click to select Shift+click to select other Double-click to edit Click+drag to move
! BasicFrame
BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
BasicFrame.tab.Rocketdesign = Rocket design
BasicFrame.tab.Flightsim = Flight simulations
BasicFrame.title.Addnewcomp = Add new component
BasicFrame.item.Openrocketdesign = Open a rocket design
BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
BasicFrame.item.SavecurRocketdesign = Save the current rocket design
BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
BasicFrame.item.Printpart = Print parts list and fin template
BasicFrame.item.Closedesign = Close the current rocket design
BasicFrame.item.Quitprogram = Quit the program
BasicFrame.menu.Rocketedt = Rocket editing
BasicFrame.dlg.lbl1 = Design '
BasicFrame.dlg.lbl2 = ' has not been saved.
BasicFrame.dlg.lbl3 = Do you want to save it?
BasicFrame.dlg.title = Design not saved
! Labels used in buttons of dialog windows
button.ok = OK
button.cancel = Borrar
button.close = Cerrar
! Common labels used in buttons of dialog windows
dlg.but.ok = OK
dlg.but.cancel = Borrar
dlg.but.close = Cerrar
! About Dialog
about.dlg.but.close = Cerrar
about.dlg.lbl.translation = Translated to Spanish by Tripoli Spain
about.dlg.lbl.transwebsite = http://www.tripoli-spain.org/
! Bug Report dialog
bugreport.dlg.title = Report de error
bugreport.dlg.but.Sendbugreport = Enviar un report de error
bugreport.dlg.but.Sendbugreport.Ttip = Enviar automáticamente un report de error a los creadores de Open Rocket
bugreport.dlg.successmsg1 = Report de error enviado con éxito
bugreport.dlg.successmsg2 = Gracias por ayudar a mejorar Open Rocket !
bugreport.dlg.successmsg3 = Report de error enviado
! Debug log dialog
debuglogdlg.but.clear = Limpiar
debuglogdlg.OpenRocketdebuglog = Fichero de error de Open Rocket
debuglogdlg.Displayloglines = Mostrar lineas de registro:
debuglogdlg.Follow = Seguir
debuglogdlg.col.Time = Hora
debuglogdlg.col.Level = Nivel
debuglogdlg.col.Location = Situación
debuglogdlg.col.Message = Mensaje
debuglogdlg.lbl.Loglinenbr = Número de línea de registro:
debuglogdlg.lbl.Time = Hora:
debuglogdlg.lbl.Level = Nivel:
! Edit Motor configuration dialog
edtmotorconfdlg.but.removemotor = Quitar motor
edtmotorconfdlg.but.Selectmotor = Seleccionar motor
edtmotorconfdlg.but.Removeconfiguration = Quitar configuración
edtmotorconfdlg.but.Newconfiguration = Nueva configuración
edtmotorconfdlg.lbl.Motormounts = Porta motor:
edtmotorconfdlg.title.Editmotorconf = Mostrar las configuraciones de motor
edtmotorconfdlg.selectcomp = Seleccionar que componentes tienen la función de porta motor:
edtmotorconfdlg.lbl.Motorconfig = Configuraciones del motor:
edtmotorconfdlg.lbl.Configname = Nombre de la configuración:
edtmotorconfdlg.lbl.Leavenamedefault = Dejar vacío el nombre por defecto.
! Example design dialog
exdesigndlg.but.open = Abrir
! Print panel dialog
printdlg.but.saveaspdf = Guardar como PDF
printdlg.but.preview = Previsualizar
printdlg.but.settings = Configuraciones
! Material edit panel
matedtpan.but.new = Nuevo
matedtpan.but.edit = Editar
matedtpan.but.delete = Borrar
matedtpan.but.revertall = Invertir todo
matedtpan.col.Material = Material
matedtpan.col.Type = Tipo
matedtpan.col.Density = Densidad
matedtpan.col.but.ttip.New = Añadir un nuevo material
matedtpan.title.Addcustmaterial = Añadir un material hecho en casa
matedtpan.but.ttip.edit = Edit an existing material
matedtpan.title.Editmaterial = Edit material
matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
matedtpan.but.ttip.delete = Delete a user-defined material
matedtpan.but.ttip.revertall = Delete all user-defined materials
matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
matedtpan.title.Revertall = Revert all?
matedtpan.lbl.edtmaterials = Editing materials will not affect existing rocket designs.
!MaterialModel
MaterialModel.title.Material = Material
MaterialModel.title.Defcustmat = Define custom material
! Preference dialog
pref.dlg.but.add = Agregar
pref.dlg.but.reset = Reiniciar
pref.dlg.but.checknow = Comprobar ahora
pref.dlg.but.defaultmetric = Sistema Métrico por defecto
pref.dlg.but.defaultimperial = Sistema Imperial por defecto
pref.dlg.title.Preferences = Preferencias
pref.dlg.tab.Units = Unidades
pref.dlg.tab.Defaultunits = Unidades por defecto
pref.dlg.tab.Materials = Materiales
pref.dlg.tab.Custommaterials = Materiales hechos en casa
pref.dlg.tab.Options = Opciones
pref.dlg.tab.Miscellaneousoptions = Otras opciones
pref.dlg.lbl.Positiontoinsert = Posición para introducir nuevos componentes del fuselaje:
pref.dlg.lbl.Confirmdeletion = Confirmar borrar simulaciones:
pref.dlg.lbl.User-definedthrust = Curvas de potencia definidas por el usuario:
pref.dlg.Allthrustcurvefiles = Todos los ficheros de curvas de potencia (*.eng; *.rse; *.zip; directorios)
pref.dlg.RASPfiles = Ficheros de motor RASP (*.eng)
pref.dlg.RockSimfiles = Ficheros de motor Rocksim (*.rse)
pref.dlg.ZIParchives = Archivos ZIP (*.zip)
pref.dlg.checkbox.Checkupdates = Comprobar actualizaciones de software al arrancar
pref.dlg.ttip.Checkupdatesnow = = Comprobar actualizaciones de software ahora
pref.dlg.lbl.Selectprefunits = Seleccione sus unidades preferidas:
pref.dlg.lbl.Rocketdimensions = Dimensiones del cohete:
pref.dlg.lbl.Linedensity = Densidad:
pref.dlg.lbl.Motordimensions = Dimensiones del motor:
pref.dlg.lbl.Surfacedensity = Densidad superficial:
pref.dlg.lbl.Distance = Distancia:
pref.dlg.lbl.Bulkdensity = Densidad media:
pref.dlg.lbl.Velocity = Velocidad:
pref.dlg.lbl.Surfaceroughness = Rugosidad de la superficie:
pref.dlg.lbl.Acceleration = Aceleración:
pref.dlg.lbl.Area = Área:
pref.dlg.lbl.Mass = Masa:
pref.dlg.lbl.Angle = Ángulo:
pref.dlg.lbl.Force = Fuerza:
pref.dlg.lbl.Rollrate = Valor de giro:
pref.dlg.lbl.Totalimpulse = Impulso total:
pref.dlg.lbl.Temperature = Temperatura:
pref.dlg.lbl.Momentofinertia = Momento de inercia:
pref.dlg.lbl.Pressure = Presión:
pref.dlg.lbl.Stability = Estabilidad:
pref.dlg.lbl.effect1 = Los cambios tendrán efecto cuando se abra nuevamente una ventana.
pref.dlg.lbl.Checkingupdates = Comprobando actualizaciones...
pref.dlg.lbl.msg1 = Ocurrió un error mientras se comunicaba con el servidor.
pref.dlg.lbl.msg2 = Incapaz de recuperar la información de las actualizaciones
pref.dlg.lbl.msg3 = Usted está utilizando la última versión de Open Rocket.
pref.dlg.lbl.msg4 = No hay actualizaciones disponibles
! Simulation edit dialog
simedtdlg.but.runsimulation = Lanzar la simulación
simedtdlg.but.resettodefault = Restaurar por defecto
simedtdlg.but.add = Agregar
simedtdlg.but.remove = Quitar
simedtdlg.title.Editsim = Edit simulation
simedtdlg.lbl.Simname = Simulation name:
simedtdlg.tab.Launchcond = Launch conditions
simedtdlg.tab.Simopt = Simulation options
simedtdlg.tab.Plotdata = Plot data
simedtdlg.tab.Exportdata = Export data
simedtdlg.lbl.Motorcfg = Motor configuration:
simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
simedtdlg.lbl.Wind = Wind
simedtdlg.lbl.Averwindspeed = Average windspeed:
simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
simedtdlg.lbl.Stddeviation = Standard deviation:
simedtdlg.lbl.ttip.Stddeviation = The standard deviation of the windspeed.
The windspeed is within twice the standard deviation from the average for 95% of the time.
simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
simedtdlg.lbl.ttip.Turbulenceintensity1 = The turbulence intensity is the standard deviation divided by the average windspeed.
simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
simedtdlg.lbl.ttip.Turbulenceintensity3 = to
simedtdlg.border.Atmoscond = Atmospheric conditions
simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
simedtdlg.checkbox.ttip.InterStdAtmosphere1 = Select to use the International Standard Atmosphere model.
This model has a temperature of
simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
simedtdlg.lbl.Temperature = Temperature:
simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
simedtdlg.lbl.Pressure = Pressure:
simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
simedtdlg.lbl.Launchsite = Launch site
simedtdlg.lbl.Latitude = Latitude:
simedtdlg.lbl.ttip.Latitude = The launch site latitude affects the gravitational pull of Earth.
Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
simedtdlg.lbl.Altitude = Altitude:
simedtdlg.lbl.ttip.Altitude = The launch altitude above mean sea level.
This affects the position of the rocket in the atmospheric model.
simedtdlg.border.Launchrod = Launch rod
simedtdlg.lbl.Length = Length:
simedtdlg.lbl.ttip.Length = The length of the launch rod.
simedtdlg.lbl.Angle = Angle:
simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
simedtdlg.lbl.Direction = Direction:
simedtdlg.lbl.ttip.Direction1 = Direction of the launch rod relative to the wind.
simedtdlg.lbl.ttip.Direction2 = = towards the wind,
simedtdlg.lbl.ttip.Direction3 = = downwind.
simedtdlg.border.Simopt = Simulator options
simedtdlg.lbl.Calcmethod = Calculation method:
simedtdlg.lbl.ttip.Calcmethod = The Extended Barrowman method calculates aerodynamic forces according
to the Barrowman equations extended to accommodate more components.
simedtdlg.lbl.ExtBarrowman = Extended Barrowman
simedtdlg.lbl.Simmethod = Simulation method:
simedtdlg.lbl.ttip.Simmethod1 = The six degree-of-freedom simulator allows the rocket total freedom during flight.
simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4th order Runge-Kutta 4 numerical integration.
simedtdlg.lbl.Timestep = Time step:
simedtdlg.lbl.ttip.Timestep1 = The time between simulation steps.
A smaller time step results in a more accurate but slower simulation.
simedtdlg.lbl.ttip.Timestep2 = The 4th order simulation method is quite accurate with a time step of
simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
simedtdlg.border.Simlist = Simulator listeners
simedtdlg.txt.longA1 = Simulation listeners is an advanced feature that allows user-written code to listen to and interact with the simulation.
simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
simedtdlg.lbl.Curlist = Current listeners:
simedtdlg.lbl.Addsimlist = Add simulation listener
simedtdlg.lbl.Noflightdata = No flight data available.
simedtdlg.lbl.runsimfirst = Please run the simulation first.
simedtdlg.chart.Simflight = Simulated flight
simedtdlg.dlg.Simres = Simulation results
! Simulation Panel
simpanel.but.newsimulation = Nueva simulación
simpanel.but.editsimulation = Editar la simulación
simpanel.but.runsimulations = Lanzar las simulaciones
simpanel.but.deletesimulations = Borrar las simulaciones
simpanel.but.plotexport = Exportar / Plot
simpanel.but.ttip.newsimulation = Add a new simulation
simpanel.but.ttip.editsim = Edit the selected simulation
simpanel.but.ttip.runsimu = Re-run the selected simulations
simpanel.but.ttip.deletesim = Delete the selected simulations
simpanel.checkbox.donotask = Do not ask me again
simpanel.lbl.defpref = You can change the default operation in the preferences.
simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
simpanel.dlg.lbl.DeleteSim2 = This operation cannot be undone.
simpanel.dlg.lbl.DeleteSim3 = Delete simulations
simpanel.col.Name = Name
simpanel.col.Motors = Motors
simpanel.col.Apogee = Apogee
simpanel.col.Maxvelocity = Max. velocity
simpanel.col.Maxacceleration = Max. acceleration
simpanel.col.Timetoapogee = Time to apogee
simpanel.col.Flighttime = Flight time
simpanel.col.Groundhitvelocity = Ground hit velocity
! SimulationRunDialog
SimuRunDlg.title.RunSim = Running simulations...
SimuRunDlg.lbl.Running = Running ...
SimuRunDlg.lbl.Simutime = Simulation time:
SimuRunDlg.lbl.Altitude = Altitude:
SimuRunDlg.lbl.Velocity = Velocity:
SimuRunDlg.msg.Unabletosim = Unable to simulate:
SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
! SimulationExportPanel
SimExpPan.desc = Comma Separated Files (*.csv)
SimExpPan.border.Vartoexport = Variables to export
SimExpPan.but.Selectall = Select all
SimExpPan.but.Selectnone = Select none
SimExpPan.border.Fieldsep = Field separator
SimExpPan.lbl.Fieldsepstr = Field separator string:
SimExpPan.lbl.longA1 = The string used to separate the fields in the exported file.
SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
SimExpPan.checkbox.Includesimudesc = Include simulation description
SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
SimExpPan.border.Comments = Comments
SimExpPan.checkbox.Includefielddesc = Include field descriptions
SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
SimExpPan.checkbox.Incflightevents = Include flight events
SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
SimExpPan.lbl.Commentchar = Comment character:
SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
SimExpPan.but.Exporttofile = Export to file...
! MotorPlot
MotorPlot.title.Motorplot = Motor plot
MotorPlot.but.Select = Select
MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
MotorPlot.Chart.Time = Time / s
MotorPlot.Chart.Thrust = Thrust / N
MotorPlot.txt.Designation = Designation:
MotorPlot.txt.Manufacturer = Manufacturer:
MotorPlot.txt.Type = Type:
MotorPlot.txt.Delays = Delays:
MotorPlot.txt.Comment = Comment:\n
! Simulation plot panel
simplotpanel.lbl.Presetplotconf = Pre configuración del Plot:
simplotpanel.lbl.Xaxistype = Tipo de eje X:
simplotpanel.lbl.Unit = Unidad:
simplotpanel.lbl.Yaxistypes = Tipo de eje Y:
simplotpanel.lbl.Flightevents = Eventos del vuelo:
simplotpanel.but.All = Todos
simplotpanel.but.None = Ninguno
simplotpanel.but.NewYaxisplottype = Nuevo tipo de Eje Y del Plot
simplotpanel.but.Plotflight = Trazado del vuelo
simplotpanel.lbl.Axis = Ejes:
simplotpanel.but.ttip.Removethisplot = Borrar este Plot
simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
simplotpanel.OptionPane.lbl2 = Cannot add plot
! Component add buttons
compaddbuttons.Bodycompandfinsets = Componentes del fuselaje y aletas
compaddbuttons.Nosecone = Ojiva
compaddbuttons.Bodytube = Tubo del fuselaje
compaddbuttons.Transition = Transición
compaddbuttons.Trapezoidal = Trapezoidal
compaddbuttons.Elliptical = Elíptico
compaddbuttons.Freeform = Forma libre
compaddbuttons.Launchlug = Guía en el fuselaje
compaddbuttons.Innercomponent = Componente interior
compaddbuttons.Innertube = Tubo interior
compaddbuttons.Coupler = Acoplador
compaddbuttons.Centeringring = Arandela\nde centraje
compaddbuttons.Bulkhead = Cámara
compaddbuttons.Engineblock = Retén\nde motor
compaddbuttons.Massobjects = Masa de objetos
compaddbuttons.Parachute = Paracaídas
compaddbuttons.Streamer = Banderola
compaddbuttons.Shockcord = Tirante de suspensión
compaddbuttons.Masscomponent = Componente\nmasa
compaddbuttons.Donotaskmeagain = No me lo pregunte de nuevo
compaddbuttons.Selectcomppos = Seleccionar la posición del componente
compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
compaddbuttons.askPosition.Inserthere = Insert here
compaddbuttons.askPosition.Addtotheend = Add to the end
compaddbuttons.askPosition.Cancel = Cancel
! Component Analysis Dialog
componentanalysisdlg.componentanalysis = Análisis del componente
componentanalysisdlg.lbl.winddir = Dirección del viento:
componentanalysisdlg.TitledBorder.warnings = Advertencias:
componentanalysisdlg.ToggleBut.worst = Peor
componentanalysisdlg.lbl.angleofattack = Ángulo de ataque:
componentanalysisdlg.lbl.machnumber = Número Mach:
componentanalysisdlg.lbl.rollrate = Valor de giro:
componentanalysisdlg.lbl.activestages = Etapas activas:
componentanalysisdlg.lbl.motorconf = Configuración del Motor:
componentanalysisdlg.TabStability.Col = Componente
componentanalysisdlg.TabStability = Estabilidad
componentanalysisdlg.TabStability.ttip = Información de Estabilidad
componentanalysisdlg.dragTableModel.Col.Component = Componente
componentanalysisdlg.dragTableModel.Col.Pressure = Presión CD
componentanalysisdlg.dragTableModel.Col.Base = Base CD
componentanalysisdlg.dragTableModel.Col.friction = Rozamiento CD
componentanalysisdlg.dragTableModel.Col.total = Total CD
componentanalysisdlg.dragTabchar = Características de rozamiento
componentanalysisdlg.dragTabchar.ttip = Características de rozamiento
componentanalysisdlg.rollTableModel.Col.component = Componente
componentanalysisdlg.rollTableModel.Col.rollforc = Coeficiente de giro
componentanalysisdlg.rollTableModel.Col.rolldamp = Coeficiente de corrección de giro
componentanalysisdlg.rollTableModel.Col.total = Total Cl
componentanalysisdlg.rollTableModel = Dinámica de giro
componentanalysisdlg.rollTableModel.ttip = Dinámica de giro
componentanalysisdlg.println.closingmethod = Llamado método de cierre:
componentanalysisdlg.println.settingnam = SETTING NAN VALUES
componentanalysisdlg.lbl.reflenght = Longitud de referencia:
componentanalysisdlg.lbl.refarea = Área de referencia:
!componentanalysisdlg.But.close = Cerrar
! Custom Material dialog
custmatdlg.title.Custommaterial = Material hecho en casa
custmatdlg.lbl.Materialname = Nombre del material:
custmatdlg.lbl.Materialtype = Tipo de material:
custmatdlg.lbl.Materialdensity = Densidad del material:
custmatdlg.checkbox.Addmaterial = Agregar material a la base de datos
! Ring Component Config
ringcompcfg.OuterRadius = OuterRadius
ringcompcfg.Automatic = Automático
ringcompcfg.InnerRadius = InnerRadius
ringcompcfg.Thickness = Espesor
ringcompcfg.Length = Longitud
ringcompcfg.Positionrelativeto = Posición relativa a:
ringcompcfg.plus = plus
ringcompcfg.PositionValue = Valor de posición
ringcompcfg.Radialdistance = Distancia radial:
ringcompcfg.Distancefrom = Distancia desde la línea central del cohete
ringcompcfg.Radialdirection = Radial direction
ringcompcfg.radialdirectionfrom = En dirección radial desde la línea central del cohete
ringcompcfg.but.Reset = Reiniciar
ringcompcfg.but.Resetcomponant = Resituar el componente a la línea central del cohete
! Body Tube Config
BodyTubecfg.lbl.Bodytubelength = Longitud del tubo del fuselaje:
BodyTubecfg.lbl.Outerdiameter = Diámtero exterior:
BodyTubecfg.lbl.Innerdiameter = Diámetro interior:
BodyTubecfg.lbl.Wallthickness = Espesor de la pared:
BodyTubecfg.tab.General = General
BodyTubecfg.tab.Generalproperties = Propiedades generales
BodyTubecfg.tab.Motor = Motor
BodyTubecfg.tab.Motormountconf = Configuración del porta motor
BodyTubecfg.checkbox.Automatic = Automático
BodyTubecfg.checkbox.Filled = Archivado
! FinSetConfig
FinSetConfig.tab.Fintabs = Raíz de aleta
FinSetConfig.tab.Through-the-wall = Raíces de aleta a través de la pared
FinSetConfig.but.Converttofreeform = Convertir a forma libre
FinSetConfig.but.Converttofreeform.ttip = Convertir esta forma de aleta a una forma libre
FinSetConfig.Convertfinset = Convertir la configuración de aleta
FinSetConfig.but.Splitfins = Separar las aletas
FinSetConfig.but.Splitfins.ttip = Dividir la configuración de aleta en varias separadas
FinSetConfig.lbl.Through-the-wall = Raíces de aleta a través de la pared:
FinSetConfig.lbl.Tablength = Longitud de la raíz:
FinSetConfig.ttip.Tablength = La longitud de la raíz de aleta.
FinSetConfig.lbl.Tabheight = Altura de la raíz:
FinSetConfig.ttip.Tabheight = Envergadura en altura de la raíz de aleta.
FinSetConfig.lbl.Tabposition = Posición de la raíz:
FinSetConfig.ttip.Tabposition = Posición de la raíz de aleta.
FinSetConfig.lbl.relativeto = Relativo a
! MotorDatabaseLoadingDialog
MotorDbLoadDlg.title = Cargando motores
MotorDbLoadDlg.Loadingmotors = Cargando motores...
! RocketConfig
RocketCfg.lbl.Designname = Nombre del proyecto:
RocketCfg.lbl.Designer = Proyectista:
RocketCfg.lbl.Comments = Comentarios:
RocketCfg.lbl.Revisionhistory = Histórico de la revisión:
RocketCfg.lbl.Material = Material:
! ShockCordConfig
ShockCordCfg.lbl.Shockcordlength = Longitud del tirante de suspensión
! RocketComponentConfig
RocketCompCfg.lbl.Componentname = Nombre del componente:
RocketCompCfg.ttip.Thecomponentname = El nombre del componente.
RocketCompCfg.tab.Override = Elegir
RocketCompCfg.tab.MassandCGoverride = Elección de estimación de Masa y CG
RocketCompCfg.tab.Figure = Figura
RocketCompCfg.tab.Figstyleopt = Opciones de estilo de la figura
RocketCompCfg.tab.Comment = Comentarios
RocketCompCfg.tab.Specifyacomment = Especifique un comentario para el componente
RocketCompCfg.lbl.Mass = Masa:
RocketCompCfg.lbl.Componentmass = Masa del componente:
RocketCompCfg.lbl.overriddento = (Elegido para
RocketCompCfg.lbl.overriddenby = (Elegido por
RocketCompCfg.lbl.Componentmaterial = Material del componente:
RocketCompCfg.lbl.Componentfinish = Acabado:
RocketCompCfg.lbl.ttip.componentmaterialaffects = El material del componente afecta su peso.
RocketCompCfg.combo.ttip.componentmaterialaffects = El material del componente afecta su peso.
RocketCompCfg.lbl.longA1 = El acabado del componente afecta su coeficiente de rozamiento.
RocketCompCfg.lbl.longA2 = El valor indicado es el promedio de la rugosidad en altura de la superficie.
RocketCompCfg.but.Setforall = Aplicar a todos
RocketCompCfg.but.ttip.Setforall = Aplicar este acabado a todos los componentes del cohete.
RocketCompCfg.lbl.Overridemassorcenter = Elegir la masa o el CG del
RocketCompCfg.checkbox.Overridemass = Elegir la masa:
RocketCompCfg.checkbox.Overridecenterofgrav = Elegir el CG:
RocketCompCfg.checkbox.OverridemassandCG = Elegir la masa y el CG de todos los subcomponentes
RocketCompCfg.lbl.longB1 = La masa elegida no incluye los motores.
RocketCompCfg.lbl.longB2 = El CG se mide desde el extremo frontal del
RocketCompCfg.lbl.Commentsonthe = Comentarios sobre
RocketCompCfg.lbl.Figurestyle = Estilo de figura:
RocketCompCfg.lbl.Componentcolor = Color del componente:
RocketCompCfg.lbl.Choosecolor = Elija color
RocketCompCfg.checkbox.Usedefaultcolor = Use color por defecto
RocketCompCfg.lbl.Complinestyle = Estilo de línea del componente:
RocketCompCfg.but.Saveasdefstyle = Guarde como estilo por defecto
RocketCompCfg.lbl.Diameter = Diámetro:
RocketCompCfg.lbl.Length = Longitud:
RocketCompCfg.lbl.Thickness = Espesor:
RocketCompCfg.checkbox.Endcapped = Extremo troncado
RocketCompCfg.ttip.Endcapped = Si el extremo del hombro está troncado.
RocketCompCfg.title.Noseconeshoulder = Hombro de la ojiva
RocketCompCfg.title.Aftshoulder = Trasera del hombro
RocketCompCfg.border.Foreshoulder = Fore shoulder
!RocketCompCfg.lbl.Length = Length:
! BulkheadConfig
BulkheadCfg.tab.Radius = Radio:
BulkheadCfg.tab.Thickness = Espesor:
BulkheadCfg.tab.General = General
BulkheadCfg.tab.Generalproperties = Propiedades generales
!CenteringRingConfig
CenteringRingCfg.tab.Outerdiam = Diámetro exterior:
CenteringRingCfg.tab.Innerdiam = Diámetro interior:
CenteringRingCfg.tab.Thickness = Espesor:
CenteringRingCfg.tab.General = General
CenteringRingCfg.tab.Generalproperties = Propiedades generales
!ComponentConfigDialog
ComponentCfgDlg.configuration = configuración
ComponentCfgDlg.Modify = Modificar
!EllipticalFinSetConfig
EllipticalFinSetCfg.Nbroffins = Número de aletas:
EllipticalFinSetCfg.Rotation = Rotación:
EllipticalFinSetCfg.Fincant = Canto de aleta:
EllipticalFinSetCfg.Rootchord = Anclaje de la raíz:
EllipticalFinSetCfg.Height = Altura:
EllipticalFinSetCfg.Positionrelativeto = Posición relativa a:
EllipticalFinSetCfg.plus = plus
EllipticalFinSetCfg.FincrossSection = Sección de corte de la aleta:
EllipticalFinSetCfg.Thickness = Espesor:
EllipticalFinSetCfg.General = General
EllipticalFinSetCfg.Generalproperties = Propiedades generales
EllipticalFinSetCfg.ttip.Fincant = Ángulo que forma el canto de la aleta con respecto al fuselaje.
!FreeformFinSetConfig
FreeformFinSetCfg.tab.General = General
FreeformFinSetCfg.tab.ttip.General = Propiedades generales
FreeformFinSetCfg.tab.Shape = Forma
FreeformFinSetCfg.tab.ttip.Finshape = Forma de la aleta
FreeformFinSetCfg.lbl.Numberoffins = Número de aletas:
FreeformFinSetCfg.lbl.Finrotation = Rotación de la aleta:
FreeformFinSetCfg.lbl.Fincant = Canto de la aleta:
FreeformFinSetCfg.lbl.ttip.Fincant = Angulo que el canto de las aletas forman con respecto al fuselaje.
FreeformFinSetCfg.lbl.Posrelativeto = Posición relativa a:
FreeformFinSetCfg.lbl.plus = plus
FreeformFinSetCfg.lbl.FincrossSection = Sección de la aleta:
FreeformFinSetCfg.lbl.Thickness = Espesor:
!InnerTubeConfig
InnerTubeCfg.tab.Motor = Motor
InnerTubeCfg.tab.ttip.Motor = Configuración del porta motor
InnerTubeCfg.tab.Cluster = Cluster
InnerTubeCfg.tab.ttip.Cluster = Configuración del cluster
InnerTubeCfg.tab.Radialpos = Posición radial
InnerTubeCfg.tab.ttip.Radialpos = Posición radial
InnerTubeCfg.lbl.Selectclustercfg = Elija la configuración del cluster:
InnerTubeCfg.lbl.TubeSep = Separación del tubo:
InnerTubeCfg.lbl.ttip.TubeSep = La separación de los tubos, 1.0 = tocándose uno a otro
InnerTubeCfg.lbl.Rotation = Rotación:
InnerTubeCfg.lbl.ttip.Rotation = Configuración del ángulo de rotación del cluster
InnerTubeCfg.lbl.Rotangle = Angulo de rotación de la configuración del cluster
InnerTubeCfg.but.Splitcluster = Split cluster
InnerTubeCfg.lbl.longA1 = Split del cluster dentro de componentes separados.
InnerTubeCfg.lbl.longA2 = Esto también duplica todos los componentes unidos a este tubo interior.
InnerTubeCfg.but.Resetsettings = Reiniciar configuración
InnerTubeCfg.but.ttip.Resetsettings = Reiniciar la separación y la rotación a valores predeterminados
! LaunchLugConfig
LaunchLugCfg.lbl.Length = Longitud:
LaunchLugCfg.lbl.Outerdiam = Diámetro exterior:
LaunchLugCfg.lbl.Innerdiam = Diámetro interior:
LaunchLugCfg.lbl.Thickness = Espesor:
LaunchLugCfg.lbl.Radialpos = Posición radial:
LaunchLugCfg.lbl.Posrelativeto = Posición relativa a:
LaunchLugCfg.lbl.plus = plus
LaunchLugCfg.tab.General = General
LaunchLugCfg.tab.Generalprop = Propiedades generales
! MassComponentConfig
MassComponentCfg.lbl.Mass = Masa
MassComponentCfg.lbl.Length = Longitud
MassComponentCfg.lbl.Diameter = Diámetro
MassComponentCfg.lbl.PosRelativeto = Posición relativa a:
MassComponentCfg.lbl.plus = plus
MassComponentCfg.tab.General = General
MassComponentCfg.tab.ttip.General = Propiedades generales
MassComponentCfg.tab.Radialpos = Posición radial
MassComponentCfg.tab.ttip.Radialpos = Configuración de la posición radial
MassComponentCfg.lbl.Radialdistance = Distancia radial:
MassComponentCfg.lbl.Radialdirection = Dirección radial:
MassComponentCfg.but.Reset = Reiniciar
! MotorConfig
MotorCfg.checkbox.compmotormount = Este componente es un porta motor
MotorCfg.lbl.Motorcfg = Configuración del motor:
MotorCfg.but.New = New
MotorCfg.lbl.Currentmotor = Motor actual:
MotorCfg.lbl.Motoroverhang = Sobresalida del motor:
MotorCfg.lbl.Ignitionat = Encendido en:
MotorCfg.lbl.plus = plus
MotorCfg.lbl.seconds = segundos
MotorCfg.lbl.longA1 = El diseño actual tiene solo una etapa.
MotorCfg.lbl.longA2 = Pueden agregarse etapas haciendo clic \"Nueva etapa\".
MotorCfg.lbl.longB1 = El diseño actual tiene
MotorCfg.lbl.longB2 = etapas.
MotorCfg.but.Selectmotor = Seleccionar motor
MotorCfg.but.Removemotor = Quitar motor
MotorCfg.lbl.motorLabel = Ninguno
! NoseConeConfig
NoseConeCfg.lbl.Noseconeshape = Forma de la ojiva:
NoseConeCfg.lbl.Shapeparam = Parámetros de la forma:
NoseConeCfg.lbl.Noseconelength = Longitud de la ojiva:
NoseConeCfg.lbl.Basediam = Diámetro de la base:
NoseConeCfg.checkbox.Automatic = Automático
NoseConeCfg.lbl.Wallthickness = Espesor de la pared:
NoseConeCfg.checkbox.Filled = Archivado
NoseConeCfg.tab.General = General
NoseConeCfg.tab.ttip.General = Porpiedades generales
NoseConeCfg.tab.Shoulder = Hombro
NoseConeCfg.tab.ttip.Shoulder = Propiedades del hombro
! ParachuteConfig
ParachuteCfg.lbl.Canopy = Campana:
ParachuteCfg.lbl.Diameter = Diámetro:
ParachuteCfg.lbl.Material = Material:
ParachuteCfg.combo.MaterialModel = El material del componente afecta su peso.
ParachuteCfg.lbl.longA1 = Drag coefficient CD:
ParachuteCfg.lbl.longB1 = Coeficiente de rozamiento relativo al área total del paracaídas.
ParachuteCfg.lbl.longB2 = Un mas alto coeficiente de rozamiento genera un valor de descenso mas lento.
ParachuteCfg.lbl.longB3 = Un valor típico para los paracaídas es 0,8.
ParachuteCfg.but.Reset = Reiniciar
ParachuteCfg.lbl.Shroudlines = Cuerdas:
ParachuteCfg.lbl.Numberoflines = Número de cuerdas:
ParachuteCfg.lbl.Linelength = Longitud de cuerda:
ParachuteCfg.lbl.Material = Material:
ParachuteCfg.lbl.Posrelativeto = Posición relativa a:
ParachuteCfg.lbl.plus = plus
ParachuteCfg.lbl.Packedlength = Longitud enpaquetado:
ParachuteCfg.lbl.Packeddiam = Diámetro del empaquetado:
ParachuteCfg.lbl.Deploysat = Despliegue en:
ParachuteCfg.lbl.seconds = segundos
ParachuteCfg.lbl.Altitude = Altitud:
ParachuteCfg.tab.General = General
ParachuteCfg.tab.ttip.General = Propiedades generales
ParachuteCfg.tab.Radialpos = Posición radial
ParachuteCfg.tab.ttip.Radialpos = Configuración de la posición radial
ParachuteCfg.lbl.Radialdistance = Distancia radial:
ParachuteCfg.lbl.Radialdirection = Dirección radial:
ParachuteCfg.but.Reset = Reiniciar
! ShockCordConfig
ShockCordCfg.lbl.Shockcordlength = Longitud del tirante de suspensión
ShockCordCfg.lbl.Shockcordmaterial = Material del tirante de suspensión:
ShockCordCfg.lbl.Posrelativeto = Posición relativa a:
ShockCordCfg.lbl.plus = plus
ShockCordCfg.lbl.Packedlength = Longitud del empaquetado:
ShockCordCfg.lbl.Packeddiam = Diámetro del empaquetado:
ShockCordCfg.tab.General = General
ShockCordCfg.tab.ttip.General = Propiedades generales
!SleeveConfig
SleeveCfg.tab.Outerdiam = Diámetro exterior:
SleeveCfg.tab.Innerdiam = Diámetro interior:
SleeveCfg.tab.Wallthickness = Espesor de la pared:
SleeveCfg.tab.Length = Longitud:
SleeveCfg.tab.General = General
SleeveCfg.tab.Generalproperties = Propiedades generales
! StreamerConfig
StreamerCfg.lbl.Striplength = Longitud de la cinta:
StreamerCfg.lbl.Stripwidth = Ancho de la cinta:
StreamerCfg.lbl.Striparea = Área de la cinta:
StreamerCfg.lbl.Aspectratio = Relación de aspecto:
StreamerCfg.lbl.Material = Material:
StreamerCfg.combo.ttip.MaterialModel = El material del componente afecta su peso.
StreamerCfg.lbl.longA1 = Coeficiente de fricción CD:
StreamerCfg.lbl.longB1 = Coeficiente de fricción relativo al área total de la banderola.
StreamerCfg.lbl.longB2 = Un mayor coeficiente de fricción genera un valor de descenso mas lento.
StreamerCfg.lbl.Automatic = Automático
StreamerCfg.lbl.longC1 = El coeficiente de Fricción es relativo al área de la banderola.
StreamerCfg.lbl.Posrelativeto = Posición relativa a:
StreamerCfg.lbl.plus = plus
StreamerCfg.lbl.Packedlength = Longitud de empaquetado:
StreamerCfg.lbl.Packeddiam = Diámetro de empaquetado:
StreamerCfg.lbl.Deploysat = Despliegue a:
StreamerCfg.lbl.seconds = segundos
StreamerCfg.lbl.Altitude = Altitud:
StreamerCfg.tab.General = General
StreamerCfg.tab.ttip.General = Propiedades generales
StreamerCfg.tab.Radialpos = Posición radial
StreamerCfg.tab.ttip.Radialpos = Configuración de posición radial
StreamerCfg.lbl.Radialdistance = Distancia radial:
StreamerCfg.lbl.Radialdirection = Dirección radial:
StreamerCfg.but.Reset = Reiniciar
! ThicknessRingComponentConfig
ThicknessRingCompCfg.tab.Outerdiam = Diámetro exterior:
ThicknessRingCompCfg.tab.Innerdiam = Diámetro Interior:
ThicknessRingCompCfg.tab.Wallthickness = Espesor de la pared:
ThicknessRingCompCfg.tab.Length = Longitud:
ThicknessRingCompCfg.tab.General = General
ThicknessRingCompCfg.tab.Generalprop = Propiedades generales
! TransitionConfig
TransitionCfg.lbl.Transitionshape = Forma de la transición:
TransitionCfg.checkbox.Clipped = Acortado
TransitionCfg.lbl.Shapeparam = Parámetro de forma:
TransitionCfg.lbl.Transitionlength = Longitud de la transición:
TransitionCfg.lbl.Forediam = Diámetro delantero:
TransitionCfg.checkbox.Automatic = Automático
TransitionCfg.lbl.Aftdiam = Diámetro trasero:
TransitionCfg.lbl.Wallthickness = Espesor de la pared:
TransitionCfg.checkbox.Filled = Archivado
TransitionCfg.tab.General = General
TransitionCfg.tab.Generalproperties = Propiedades generales
TransitionCfg.tab.Shoulder = Hombro
TransitionCfg.tab.Shoulderproperties = Propiedades del hombro
! TrapezoidFinSetConfig
TrapezoidFinSetCfg.lbl.Nbroffins = Número de aletas:
TrapezoidFinSetCfg.lbl.ttip.Nbroffins = Número de aletas en la base de aletas.
TrapezoidFinSetCfg.lbl.Finrotation = Rotación de las aletas:
TrapezoidFinSetCfg.lbl.ttip.Finrotation = Ángulo de la primera aleta en la base de aletas.
TrapezoidFinSetCfg.lbl.Fincant = Canto de aleta:
TrapezoidFinSetCfg.lbl.ttip.Fincant = El ángulo del canto de las aletas respecto al fuselaje.
TrapezoidFinSetCfg.lbl.Rootchord = Anclaje de la raíz:
TrapezoidFinSetCfg.lbl.Tipchord = Forma de la extremidad:
TrapezoidFinSetCfg.lbl.Height = Altura:
TrapezoidFinSetCfg.lbl.Sweeplength = Longitud del barrido:
TrapezoidFinSetCfg.lbl.Sweepangle = Ángulo de barrido:
TrapezoidFinSetCfg.lbl.FincrossSection = Sección de la aleta:
TrapezoidFinSetCfg.lbl.Thickness = Espesor:
TrapezoidFinSetCfg.lbl.Posrelativeto = Posición relativa a:
TrapezoidFinSetCfg.lbl.plus = plus
TrapezoidFinSetCfg.tab.General = General
TrapezoidFinSetCfg.tab.Generalproperties = Propiedades generales
!MotorConfigurationModel
MotorCfgModel.Editcfg = Edit configurations
! StorageOptionChooser
StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
StorageOptChooser.rdbut.Allsimdata = All simulated data
StorageOptChooser.lbl.longA1 = Store all simulated data.
StorageOptChooser.lbl.longA2 = This can result in very large files!
StorageOptChooser.rdbut.Every = Every
StorageOptChooser.lbl.longB1 = Store plottable values approximately this far apart.
StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
StorageOptChooser.lbl.seconds = seconds
StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
StorageOptChooser.lbl.longC1 = Store only the values shown in the summary table.
StorageOptChooser.lbl.longC2 = This results in the smallest files.
StorageOptChooser.checkbox.Compfile = Compress file
StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
StorageOptChooser.ttip.Saveopt = Save options
StorageOptChooser.lbl.Estfilesize = Estimated file size:
StorageOptChooser.lbl.Saveopt = Save options
! ThrustCurveMotorSelectionPanel
TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
! PlotDialog
PlotDialog.title.Flightdataplot = Flight data plot
PlotDialog.Chart.Simulatedflight = Simulated flight
PlotDialog.CheckBox.Showdatapoints = Show data points
PlotDialog.lbl.Chart = Click+drag down+right to zoom in, up+left to zoom out
! "main" prefix is used for the main application dialog
main.menu.file = File
main.menu.file.new = New
main.menu.file.open = Open...
main.menu.file.openExample = Open example...
main.menu.file.save = Save
main.menu.file.saveAs = Save as...
main.menu.file.print = Print...
main.menu.file.close = Close
main.menu.file.quit = Quit
main.menu.edit = Edit
main.menu.edit.undo = Undo
main.menu.edit.redo = Redo
main.menu.edit.cut = Cut
main.menu.edit.copy = Copy
main.menu.edit.paste = Paste
main.menu.edit.delete = Delete
main.menu.edit.preferences = Preferences
main.menu.analyze = Analyze
main.menu.analyze.componentAnalysis = Component analysis
main.menu.help = Help
main.menu.help.license = License
main.menu.help.bugReport = Bug report
main.menu.help.debugLog = Debug log
main.menu.help.about = About
main.menu.debug = Debug
main.menu.debug.whatisthismenu = What is this menu?
main.menu.debug.createtestrocket = Create test rocket