amanda-client.conf
Prev  Chapter 36. The Amanda Manual Pages.  Next

-------------------------------------------------------------------------------

Name

amanda-client.conf  Client configuration file for Amanda, the Advanced
Maryland Automatic Network Disk Archiver

DESCRIPTION

amanda-client.conf is the client configuration file for Amanda. This manpage
lists the relevant sections and parameters of this file for quick reference.
The files <CONFIG_DIR>/amanda-client.conf and <CONFIG_DIR>/<config>/amanda-
client.conf are loaded.

PARAMETERS

There are a number of configuration parameters that control the behavior of the
Amanda programs. All have default values, so you need not specify the parameter
in amanda-client.conf if the default is suitable.
Lines starting with # are ignored, as are blank lines. Comments may be placed
on a line with a directive by starting the comment with a #. The remainder of
the line is ignored.
Keywords are case insensitive, i.e. auth and Auth are treated the same.
Integer arguments may have one of the following (case insensitive) suffixes,
some of which have a multiplier effect:

POSSIBLE SUFFIXES



  b byte bytes
      Some number of bytes.

  bps
      Some number of bytes per second.

  k kb kbyte kbytes kilobyte kilobytes
      Some number of kilobytes (bytes*1024).

  kps kbps
      Some number of kilobytes per second (bytes*1024).

  m mb meg mbyte mbytes megabyte megabytes
      Some number of megabytes (bytes*1024*1024).

  mps mbps
      Some number of megabytes per second (bytes*1024*1024).

  g gb gbyte gbytes gigabyte gigabytes
      Some number of gigabytes (bytes*1024*1024*1024).

  tape tapes
      Some number of tapes.

  day days
      Some number of days.

  week weeks
      Some number of weeks (days*7).

      Note

      The value inf may be used in most places where an integer is expected to
      mean an infinite amount.
      Boolean arguments may have any of the values y, yes, t, true or on to
      indicate a true state, or n, no, f, false or off to indicate a false
      state. If no argument is given, true is assumed.


PARAMETERS



  conf string
      Default: Set by configure. The conf use by amrecover.

  index_server string
      Default: Set by configure. The amindexd server amrecover will connect to.

  tape_server string
      Default: Set by configure. The amidxtaped server amrecover will connect
      to.

  tapedev string
      Default: Set by configure. The tapedev amrecover will use.

  auth string
      Default: bsd. Type of authorization to perform between tape server and
      backup client hosts.
      bsd, bsd authorization with udp initial connection and one tcp connection
      by data stream.
      bsdtcp, bsd authorization but use only one tcp connection.
      bsdudp, like bsd, but will use only one tcp connection for all data
      stream.
      krb4 to use Kerberos-IV authorization.
      krb5 to use Kerberos-V authorization.
      rsh to use rsh authorization.
      ssh to use OpenSSH authorization.

  ssh_keys string
      Default: No default. The key file the ssh auth will use, it must be the
      private key. If this parameter is not specified, then the deafult ssh key
      will be used.

  gnutar_list_dir string
      Default from configure --with-gnutar-listdir=DIR. The directory where
      gnutar keep its state file.

  amandates string
      Default: /etc/amandates. The file where amanda keep the last date of each
      dumplevel.

  connect_tries int
      Default: 3. How many times the server will try a connection.

  rep_tries int
      Default: 5. How many times amandad will resend a REP packet if it doesn't
      get the ACK packet.

  debug_amandad int
      Default: 0. Debug level of the amandad process

  debug_amidxtaped int
      Default: 0. Debug level of the amidxtaped process

  debug_amindexd int
      Default: 0. Debug level of the amindexd process

  debug_amrecover int
      Default: 0. Debug level of the amrecover process

  debug_auth int
      Default: 0. Debug level of the auth module

  debug_event int
      Default: 0. Debug level of the event module

  debug_holding int
      Default: 0. Debug level of the holdingdisk module

  debug_protocol int
      Default: 0. Debug level of the protocol module

  debug_selfcheck int
      Default: 0. Debug level of the selfcheck process

  debug_sendsize int
      Default: 0. Debug level of the sendsize process

  debug_sendbackup int
      Default: 0. Debug level of the sendbackup process

  reserved-udp-port int,int
      Default: --with-udpportrange or 512,1023. Reserved udp port that will be
      used (amrecover with bsd or bsdudp)

  reserved-tcp-port int,int
      Default: --with-low-tcpportrange or 512,1023. Reserved tcp port that will
      be used (amrecover with bsdtcp)

  unreserved-tcp-port int,int
      Default: --with-tcpportrange or 1025,65536. Unreserved tcp port that will
      be used (bsd, bsdudp)


AUTHOR

James da Silva, <jds@amanda.org>: Original text
Stefan G. Weichinger, <sgw@amanda.org>, maintainer of the Amanda-documentation:
XML-conversion, major update, splitting

SEE ALSO

amanda(8), amanda.conf(5), amcrypt(8), aespipe(1),
-------------------------------------------------------------------------------

Prev          Up      Next
amanda.conf  Home  amcheck