[[!meta title="MicroPeak"]]
# Introducing MicroPeak by AltusMetrum #
Micropeak is a barometric logging altimeter for precision model
rocketry altitude measurements.
Production units are available from the
[Garbee and Garbee](https://shop.gag.com)
web store and [Apogee Components](http://www.apogeerockets.com/Electronics_Payloads/Altimeters/MicroPeak_Altimeter)
Data download is available using the [MicroPeak USB adapter](../MicroPeakUSB).
## Documentation ##
The MicroPeak manual is available in
[html](../AltOS/doc/micropeak.html) and
[pdf](../AltOS/doc/micropeak.pdf) formats.
## Software ##
The MicroPeak application runs on Linux, Mac OS X and Windows. It
communicates with the [MicroPeak USB adapter](../MicroPeakUSB) to download and analyze
flight data. It's written in [Java](http://java.com) and offers the
same functionality and interface on all three platforms. It uses the
FTDI USB Serial drivers to communicate with the hardware. If you're
running Mac OS X or Windows, a compatible version of those drivers is
included with the software. You can also install a different from from
the [FTDI Driver](http://www.ftdichip.com/FTDrivers.htm) page.
### Available Versions ###
[[!inline pages="./releases/* and !*/Discussion and !*.sh and !*.html and !*.bz2 and !*.zip and !*.exe and !*.dmg" show="10" rss="no" raw="yes" ]]
## Hardware Features ##
* Measure ground pressure and peak altitude pressure.
* Logs 48 seconds of flight data
* Orange LED blinks out maximum height in decimeters.
* 18mm x 14mm. 1.9g including battery.
* Power switch.
The CR1025 battery holder is mounted on the back side of the board, so there are no external wires or batteries to manage.
## Software features ##
* Saves last flight data to non-volatile memory.
* Reports previous flight on power-on.
* Automatically shuts down on landing to preserve battery.
## Battery Holder ##
MicroPeak includes an integrated battery holder on the back side of
the circuit board.
## Developer View ##
Here's a close-up view of the hardware
* Hardware Features
* [ATMEL ATtiny85](http://www.atmel.com/devices/attiny85.aspx) Microcontroller
* 8K flash
* 512B RAM
* 512B EEPROM
* SPI/I2C interface
* [Measurement Specialties MS5607](http://www.meas-spec.com/product/t_product.aspx?id=8499) Micro Altimeter Module
* Wide range — 120kPa to 1kPa (approximately -1500m to 31000m)
* High precision — 2.4Pa resolution (approximately 20cm at sea level)
* Factory calibrated.
* CR1025 Lithium Battery
* 30mAh. Runs MicroPeak for more than 40 hours on the pad or in flight
* [OSRAM LO T67K](http://catalog.osram-os.com/catalogue/catalogue.do?favOid=000000000002269f00090023&act=showBookmark) orange LED
* Standard 6-pin AVR programming interface.
* Software Features
* Written in C
* Samples pressure every 96ms
* Delay 30s after power-on to finish airframe prep
* Detect boost with 10m altitude change
* Exponential averaging filter to minimize transient effects.
* Tools Used
* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
* [GCC](http://gcc.gnu.org) as an AVR cross-compiler
* Licenses
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)