5 # tell gdb our flash memory map
6 # and enable flash programming
8 gdb_flash_program enable
12 ft2232_device_desc "Amontec JTAGkey A"
14 ft2232_vid_pid 0x0403 0xcff8
20 #use combined on interfaces or targets that can't set TRST/SRST separately
21 reset_config srst_only srst_pulls_trst
24 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
25 jtag_device 4 0x1 0xf 0xe
28 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
29 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
31 target_script 0 reset .\prj\sam7x256_reset.script
33 #flash bank <driver> <base> <size> <chip_width> <bus_width>
34 flash bank at91sam7 0 0 0 0 0
36 # For more information about the configuration files, take a look at:
37 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger