2 # Configuration file for NXP MC-IMX8MP-EVK on-board internal JTAG
4 # Using this interface requires enabling "remote mode" for the board using the
5 # NXP bcu tool (see https://github.com/NXPmicro/bcu)
7 # bcu set_gpio remote_en 1 -board=imx8mpevk
9 # The REMOTE_EN gpio is accessible through the same FTDI adapter but it's
10 # behind an I2C GPIO expander.
14 ftdi vid_pid 0x0403 0x6011
17 ftdi layout_init 0x00f8 0x000b
19 ftdi layout_signal RESET_B -data 0x0010 -oe 0x0010
20 # Called SYS_nRST in schematics
21 ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
22 ftdi layout_signal IO_nRST -data 0x0040 -oe 0x0040
23 ftdi layout_signal ONOFF_B -data 0x0080 -oe 0x0080
25 ftdi layout_signal GPIO1 -data 0x0100 -oe 0x0100
26 ftdi layout_signal GPIO2 -data 0x0200 -oe 0x0200
27 ftdi layout_signal GPIO3 -data 0x0400 -oe 0x0400
28 ftdi layout_signal GPIO4 -data 0x0800 -oe 0x0800