1 # SPDX-License-Identifier: GPL-2.0-or-later
3 source [find target/atheros_ar2313.cfg]
5 reset_config trst_and_srst
7 $_TARGETNAME configure -event reset-init {
8 mips32 cp0 12 0 0x10400000
10 # configure sdram controller
18 mww 0xb8300000 0x6c0088
24 # 0x00000001 - 0x01 << FLASHCTL_IDCY_S
25 # 0x000000e0 - 0x07 << FLASHCTL_WST1_S
26 # FLASHCTL_RBLE 0x00000400 - Read byte lane enable
27 # 0x00003800 - 0x07 << FLASHCTL_WST2_S
28 # FLASHCTL_AC_8M 0x00060000 - Size of flash
29 # FLASHCTL_E 0x00080000 - Flash bank enable (added)
30 # FLASHCTL_WP 0x04000000 - write protect. If used, CFI mode wont work!!
31 # FLASHCTL_MWx16 0x10000000 - 16bit mode. Do not use it!!
32 # FLASHCTL_MWx8 0x00000000 - 8bit mode.
33 mww 0xb8400000 0x000d3ce1
36 set _FLASHNAME $_CHIPNAME.flash
37 flash bank $_FLASHNAME cfi 0xbe000000 0x00400000 1 1 $_TARGETNAME x16_as_x8