2 # Part of SDCC - http://sdcc.sourceforge.net/
3 # Michael Hope <michaelh@juju.net.nz> 2001
5 # This Makefile builds and runs the test suites under tests/ for each
6 # one of the supported ports located under ports/. The test suite
7 # results are summarised and individual test failures are logged. The
8 # expected result is a single line per port summarising the number of
9 # failures, test points, and test cases. The philosophy is that
10 # checked in code should always pass the suite with no failures, as
11 # then if there are failures then it is in the current developers code.
13 # Only the required suites are run. Changing sdcc causes all to be
14 # re-run. Changing one suite causes just that to be run. Changing
15 # one of the library files should cause all to re-run
18 # * The sdcc-extra package, available from svn.
19 # o svn co https://sdcc.svn.sourceforge.net/svnroot/sdcc/trunk/sdcc-extra
20 # o Provides the emulators
21 # * The gbdk-lib package from gbdk.
22 # o cvs -d cvs.gbdk.sourceforge.net:/cvsroot/gbdk co gbdk-lib
23 # o Proviles mul, div, and include files for the z80 tests.
24 # * python 1.5 or above
25 # * uCsim for the mcs51 port
27 # The paths below assume that sdcc, sdcc-extra, and gbdk-lib all reside in
31 # Starting at the bottom
32 # Set of source test suites
33 # Each source suite is processesd producing multiple device specific test suites.
34 # Each device specific test suite is compiled.
35 # Each device specific test suite is run, and the output recorded.
36 # The output from each device specific test suite derrived from a source
37 # test suite are collated.
39 # Uncomment this to show only errors and the summary.
40 # Comment this out for debugging.
45 CPPFLAGS = @CPPFLAGS@ -DNO_VARARGS
50 top_srcdir = @top_srcdir@
51 top_builddir = @top_builddir@
53 # All original tests live in TESTS_DIR and below
54 TESTS_DIR = $(srcdir)/tests
55 TESTS_NAME = $(TESTS_DIR)
56 # All suite results go in RESULTS_DIR
58 # All data relating to supported ports live in their own directory
60 PORTS_DIR = $(srcdir)/ports
62 # Itermediate data directories
63 # Directory that generated cases and the related object code go.
66 # Script that takes a source test suite and generates the iterations
67 GENERATE_CASES = $(srcdir)/generate-cases.py
69 # Magically generate the list of configured ports to test.
70 # Each directory under ports/ is used as a port name. Each port is tested.
71 # Each port must have a spec.mk which describes how to build the object
72 # files and how to run the emulator.
73 ALL_PORTS = $(filter-out .svn xa51 z80 gbz80 pic16 pic14 mcs51-common,$(notdir $(wildcard $(PORTS_DIR)/*)))
75 # These ports will be cleaned with 'make clean'
76 CLEAN_PORTS = $(filter-out .svn mcs51-common,$(notdir $(wildcard $(PORTS_DIR)/*)))
82 # Test all of the ports
84 for i in $(ALL_PORTS); do $(MAKE) make_library test-port PORT=$$i; done
86 # Helper rule for testing the z80 port only
88 $(MAKE) test-port PORT=z80
90 # Helper rule for testing the z80 port only
92 $(MAKE) test-port PORT=gbz80
94 # Helper rule for testing the mcs51 port only
95 test-mcs51: test-mcs51-small test-mcs51-medium test-mcs51-large test-mcs51-stack-auto test-mcs51-xstack-auto
98 $(MAKE) test-port PORT=mcs51-small
101 $(MAKE) test-port PORT=mcs51-medium
104 $(MAKE) test-port PORT=mcs51-large
106 test-mcs51-stack-auto:
107 $(MAKE) test-port PORT=mcs51-stack-auto
109 test-mcs51-xstack-auto:
110 $(MAKE) make_library test-port PORT=mcs51-xstack-auto
112 # Helper rule for testing the ds390 port only
114 $(MAKE) test-port PORT=ds390
116 # Helper rule for testing the z80 port only(use ucSim simulator)
118 $(MAKE) test-port PORT=ucz80
120 # Helper rule for testing the hc08 port only(use ucSim simulator)
122 $(MAKE) test-port PORT=hc08
124 # Helper rule for testing the xa51 port only(use ucSim simulator)
126 $(MAKE) test-port PORT=xa51
128 # Helper rule for testing the pic16 port only(use gpsim simulator)
130 $(MAKE) test-port PORT=pic16
132 # Helper rule for testing the pic14 port only(use gpsim simulator)
134 $(MAKE) test-port PORT=pic14
136 ### Helper rule for testing the host cc only
138 $(MAKE) test-port PORT=host
141 $(MAKE) test-port PORT=host
143 # Begin per-port rules
144 # List of all of the known source test suites.
145 ALL_TESTS = $(shell find $(TESTS_DIR) -name "*.c" | sort)
147 # Intermediate directory
148 PORT_CASES_DIR = $(CASES_DIR)/$(PORT)
149 PORT_RESULTS_DIR = $(RESULTS_DIR)/$(PORT)
150 # Each test generates a result log file
151 PORT_RESULTS = $(ALL_TESTS:$(TESTS_DIR)/%.c=$(PORT_RESULTS_DIR)/%.out)
153 SDCC_EXTRA_DIR = $(top_builddir)/../sdcc-extra
154 INC_DIR = $(top_srcdir)/device/include
156 # Defaults. Override in spec.mk if required.
158 SDCC = $(top_builddir)/bin/sdcc
160 SDCCFLAGS += --fverbose-asm -DNO_VARARGS
161 # Extension of object intermediate files
163 # Extension of files that can be run in the emulator
165 # Currently unused. Extension to append to intermediate directories.
168 # Only include if we're in a per-port call.
170 include $(PORTS_DIR)/$(PORT)/spec.mk
173 make_library: $(MAKE_LIBRARY)
175 SDCCFLAGS += -I$(srcdir)/fwk/include -I$(srcdir)/tests -I$(INC_DIR)
177 # List of intermediate files to keep. Pretty much keep everything as
178 # disk space is free.
179 .PRECIOUS: $(PORT_CASES_DIR)/% %$(OBJEXT) %$(EXEEXT)
181 # Rule to generate the iterations of a test suite off the soure suite.
182 $(PORT_CASES_DIR)/%/iterations.stamp: $(TESTS_DIR)/%.c $(GENERATE_CASES)
183 echo Processing $(notdir $<)
186 python $(GENERATE_CASES) $< $(dir $@) > /dev/null
189 # Rule linking the combined results log to all of the files in the
190 # iteration directory.
191 $(PORT_RESULTS_DIR)/%.out: $(PORT_CASES_DIR)/%/iterations.stamp
192 $(MAKE) iterations PORT=$(PORT) CASES=$(dir $<)
194 # Rule to summaries the results for one port after all of the tests
196 port-results: port-dirs $(PORT_RESULTS)
197 echo Summary for \'$(PORT)\': `cat $(PORT_RESULTS) | python $(srcdir)/collate-results.py`
201 mkdir -p $(PORT_CASES_DIR) $(PORT_RESULTS_DIR)
202 echo Running $(PORT) regression tests
204 test-port: port-results
206 # Begin rules that process each iteration generated from the source
209 # List of all of the generated iteration source files.
210 SUB_CASES = $(sort $(wildcard $(CASES)*.c))
211 # List of all the sub result logs generated from the iterations.
212 SUB_RESULTS = $(SUB_CASES:%.c=%.out)
213 # Overall target. Concatenation of all of the sub results.
214 RESULTS = $(CASES:$(CASES_DIR)/%/$(DIREXT)=$(RESULTS_DIR)/%.out)
216 iterations: $(RESULTS)
218 # Rule to generate the overall target from the sub results.
219 $(RESULTS): $(SUB_RESULTS)
220 cat $(SUB_RESULTS) > $@
222 # The remainder of the rules are in $PORT/spec.mk. The port needs to
223 # be able to turn an iterated test suite into a sub result, normally
225 # 1. Compile the required library files
226 # 2. Compile this test suite.
227 # 3. Link 1, 2, and any required stdlib into an executable.
228 # 4. Run the executable inside an emulator, and capture the text
231 # The emulator must exit when main() returns.
236 rm -rf $(CASES_DIR) $(RESULTS_DIR) *.pyc
237 for i in $(CLEAN_PORTS); do $(MAKE) -f $(PORTS_DIR)/$$i/spec.mk _clean PORTS_DIR=$(PORTS_DIR) PORT=$$i; done