03aa0cb5af0bf95994efa11f5a984f9c34ae771a
[fw/sdcc] / src / xa51 / main.c
1 /** @file main.c
2     xa51 specific general functions.
3
4     Note that mlh prepended _xa51_ on the static functions.  Makes
5     it easier to set a breakpoint using the debugger.
6 */
7 #include "common.h"
8 #include "main.h"
9 #include "ralloc.h"
10 #include "gen.h"
11
12 static char _defaultRules[] =
13 {
14 #include "peeph.rul"
15 };
16
17 /* list of key words used by xa51 */
18 static char *_xa51_keywords[] =
19 {
20   "at",
21   "bit",
22   "code",
23   "critical",
24   "data",
25   "far",
26   //"idata",
27   "interrupt",
28   "near",
29   //"pdata",
30   "reentrant",
31   "sfr",
32   "sbit",
33   "using",
34   "xdata",
35   //"_data",
36   //"_code",
37   //"_generic",
38   //"_near",
39   //"_xdata",
40   //"_pdata",
41   //"_idata",
42   "_naked",
43   //"_overlay",
44   NULL
45 };
46
47 extern int rewinds;
48 void   _xa51_genAssemblerEnd () {
49   //fprintf (stderr, "Did %d rewind%c for c-line in asm comments\n", rewinds,
50   //rewinds==1 ? '\0' : 's');
51 }
52
53 void xa51_assignRegisters (eBBlock ** ebbs, int count);
54
55 static int regParmFlg = 0;      /* determine if we can register a parameter */
56
57 static void
58 _xa51_init (void)
59 {
60   asm_addTree (&asm_xa_asm_mapping);
61 }
62
63 static void
64 _xa51_reset_regparm ()
65 {
66   regParmFlg = 0;
67 }
68
69 static int
70 _xa51_regparm (sym_link * l)
71 {
72   return 0; // for now
73   /* for this processor it is simple
74      can pass only the first parameter in a register */
75   if (regParmFlg)
76     return 0;
77
78   regParmFlg = 1;
79   return 1;
80 }
81
82 static bool
83 _xa51_parseOptions (int *pargc, char **argv, int *i)
84 {
85   /* TODO: allow port-specific command line options to specify
86    * segment names here.
87    */
88   return FALSE;
89 }
90
91 static void
92 _xa51_finaliseOptions (void)
93 {
94   port->mem.default_local_map = istack;
95   port->mem.default_globl_map = xdata;
96 }
97
98 static void
99 _xa51_setDefaultOptions (void)
100 {
101   options.stackAuto=1;
102   options.intlong_rent=1;
103   options.float_rent=1;
104   options.stack_loc=0x100;
105 }
106
107 static const char *
108 _xa51_getRegName (struct regs *reg)
109 {
110   if (reg)
111     return reg->name;
112   return "err";
113 }
114
115 /* Generate interrupt vector table. */
116 static int
117 _xa51_genIVT (FILE * of, symbol ** interrupts, int maxInterrupts)
118 {
119   return TRUE;
120 }
121
122 /* Generate code to copy XINIT to XISEG */
123 static void _xa51_genXINIT (FILE * of) {
124   fprintf (of, ";       _xa51_genXINIT() start\n");
125   fprintf (of, "        mov     r0,#l_XINIT\n");
126   fprintf (of, "        beq     00002$\n");
127   fprintf (of, "        mov     r1,#s_XINIT\n");
128   fprintf (of, "        mov     r2,#s_XISEG\n");
129   fprintf (of, "00001$: movc    r3l,[r1+]\n");
130   fprintf (of, "        mov     [r2+],r3l\n");
131   fprintf (of, "        djnz    r0,00001$\n");
132   fprintf (of, "00002$:\n");
133   fprintf (of, ";       _xa51_genXINIT() end\n");
134 }
135
136 static void
137 _xa51_genAssemblerPreamble (FILE * of)
138 {
139   fprintf (of, "_errno\tsfr\t0x00; to keep the fp-lib's happy for now\n\n");
140   fprintf (of, "\t.area CSEG\t(CODE)\n");
141   fprintf (of, "__interrupt_vect:\n");
142   fprintf (of, "\t.dw\t0x8f00\n");
143   fprintf (of, "\t.dw\t__sdcc_gsinit_startup\n");
144   fprintf (of, "\n");
145   fprintf (of, "__sdcc_gsinit_startup:\n");
146   fprintf (of, "\tmov\tr7,#0x%04x\n", options.stack_loc);
147   fprintf (of, "\tcall\t_external_startup\n");
148   _xa51_genXINIT(of);
149   fprintf (of, "\tcall\t_main\n");
150   fprintf (of, "\treset\t;main should not return\n");
151 }
152
153 /* dummy linker for now */
154 void xa_link(void) {
155 }
156
157 /* Do CSE estimation */
158 static bool cseCostEstimation (iCode *ic, iCode *pdic)
159 {
160     operand *result = IC_RESULT(ic);
161     sym_link *result_type = operandType(result);
162
163     /* if it is a pointer then return ok for now */
164     if (IC_RESULT(ic) && IS_PTR(result_type)) return 1;
165     
166     /* if bitwise | add & subtract then no since xa51 is pretty good at it 
167        so we will cse only if they are local (i.e. both ic & pdic belong to
168        the same basic block */
169     if (IS_BITWISE_OP(ic) || ic->op == '+' || ic->op == '-') {
170         /* then if they are the same Basic block then ok */
171         if (ic->eBBlockNum == pdic->eBBlockNum) return 1;
172         else return 0;
173     }
174         
175     /* for others it is cheaper to do the cse */
176     return 1;
177 }
178
179 #if 0
180 /** $1 is always the basename.
181     $2 is always the output file.
182     $3 varies
183     $l is the list of extra options that should be there somewhere...
184     MUST be terminated with a NULL.
185 */
186 static const char *_linkCmd[] =
187 {
188   "{bindir}{sep}aslink", "-nf", "$1", NULL
189 };
190 #endif
191
192 /* $3 is replaced by assembler.debug_opts resp. port->assembler.plain_opts */
193 static const char *_asmCmd[] =
194 {
195   "xa_asm", "$l", "$3", "$1.xa", NULL
196 };
197
198 /* Globals */
199 PORT xa51_port =
200 {
201   TARGET_ID_XA51,
202   "xa51",
203   "MCU 80C51XA",                /* Target name */
204   {
205     FALSE,                      /* Emit glue around main */
206     MODEL_LARGE,
207     MODEL_LARGE
208   },
209   {
210     _asmCmd,
211     NULL,
212     "",                         /* Options with debug */
213     "",                         /* Options without debug */
214     0,
215     ".xa",
216     NULL                        /* no do_assemble function */
217   },
218   {
219     NULL, //_linkCmd,
220     NULL,
221     xa_link,
222     ".rel"
223   },
224   {
225     _defaultRules
226   },
227   {
228         /* Sizes: char, short, int, long, ptr, fptr, gptr, bit, float, max */
229     1, 2, 2, 4, 2, 2, 3, 1, 4, 4
230   },
231   {
232     "XSEG    (XDATA)",
233     "STACK   (XDATA)",
234     "CSEG    (CODE)",
235     "DSEG    (DATA)",
236     NULL, //"ISEG    (DATA)",
237     "XSEG    (XDATA)",
238     "BSEG    (BIT)",
239     NULL, //"RSEG    (DATA)",
240     "GSINIT  (CODE)",
241     NULL, //"OSEG    (OVR,XDATA)",
242     "GSFINAL (CODE)",
243     "HOME    (CODE)",
244     "XISEG   (XDATA)", // initialized xdata
245     "XINIT   (CODE)", // a code copy of xiseg
246     NULL, // default local map
247     NULL, // default global map
248     1
249   },
250   {
251     -1, // stack grows down
252     0, // bank overhead NUY
253     6, // isr overhead
254     4, // function call overhead
255     0, // reentrant overhead NUY
256     0 // banked overhead NUY
257   },
258     /* xa51 has an 16 bit mul */
259   {
260     2, -2
261   },
262   "_",
263   _xa51_init,
264   _xa51_parseOptions,
265   _xa51_finaliseOptions,
266   _xa51_setDefaultOptions,
267   xa51_assignRegisters,
268   _xa51_getRegName,
269   _xa51_keywords,
270   _xa51_genAssemblerPreamble,
271   _xa51_genAssemblerEnd,
272   _xa51_genIVT,
273   _xa51_genXINIT,
274   _xa51_reset_regparm,
275   _xa51_regparm,
276   NULL, // process_pragma()
277   NULL, // getMangledFunctionName()
278   NULL, // hasNativeMulFor()
279   TRUE, // use_dw_for_init
280   0,                            /* leave lt */
281   0,                            /* leave gt */
282   0,                            /* transform <= to ! > */
283   0,                            /* transform >= to ! < */
284   0,                            /* transform != to !(a == b) */
285   0,                            /* leave == */
286   FALSE,                        /* No array initializer support. */
287   cseCostEstimation,
288   NULL,                         /* no builtin functions */
289   GPOINTER,                     /* treat unqualified pointers as "generic" pointers */
290   1,                            /* reset labelKey to 1 */
291   1,                            /* globals & local static allowed */
292   PORT_MAGIC
293 };