3 # jtag speed. We need to stick to 16kHz until we've finished reset.
11 #use combined on interfaces or targets that can't set TRST/SRST separately
12 reset_config trst_and_srst
15 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
16 jtag_device 8 0x1 0x1 0xfe
17 jtag_device 4 0x1 0xf 0xe
18 jtag_device 5 0x1 0x1 0x1e
20 #target <type> <startup mode>
21 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
22 target arm966e little 1 arm966e
24 [new_target_name] configure -event old-pre_reset { jtag_rclk 16 }
26 [new_target_name] configure -event old-post_reset {
27 # We can increase speed now that we know the target is halted.
31 # PFQBC enabled / DTCM & AHB wait-states disabled
34 str9x flash_config 0 4 2 0 0x80000
35 flash protect 0 0 7 off
40 working_area 0 0x50000000 16384 nobackup
42 #flash bank str9x <base> <size> 0 0 <target#> <variant>
43 flash bank str9x 0x00000000 0x00080000 0 0 0
44 flash bank str9x 0x00080000 0x00008000 0 0 0
46 # For more information about the configuration files, take a look at: