1 /*-------------------------------------------------------------------------
3 pcode.h - post code generation
4 Written By - Scott Dattalo scott@dattalo.com
5 Ported to PIC16 By - Martin Dubuc m.dubuc@rogers.com
7 This program is free software; you can redistribute it and/or modify it
8 under the terms of the GNU General Public License as published by the
9 Free Software Foundation; either version 2, or (at your option) any
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 -------------------------------------------------------------------------*/
29 The post code generation is an assembler optimizer. The assembly code
30 produced by all of the previous steps is fully functional. This step
31 will attempt to analyze the flow of the assembly code and agressively
32 optimize it. The peep hole optimizer attempts to do the same thing.
33 As you may recall, the peep hole optimizer replaces blocks of assembly
34 with more optimal blocks (e.g. removing redundant register loads).
35 However, the peep hole optimizer has to be somewhat conservative since
36 an assembly program has implicit state information that's unavailable
37 when only a few instructions are examined.
38 Consider this example:
44 The movf seems redundant since we know that the W register already
45 contains the same value of t1. So a peep hole optimizer is tempted to
46 remove the "movf". However, this is dangerous since the movf affects
47 the flags in the status register (specifically the Z flag) and subsequent
48 code may depend upon this. Look at these two examples:
52 movf t1,w ; Can't remove this movf
58 movf t1,w ; This movf can be removed
59 xorwf t2,w ; since xorwf will over write Z
69 /***********************************************************************
72 * The DFPRINTF macro will call fprintf if PCODE_DEBUG is defined.
73 * The macro is used like:
75 * DPRINTF(("%s #%d\n","test", 1));
77 * The double parenthesis (()) are necessary
79 ***********************************************************************/
83 #define DFPRINTF(args) (fprintf args)
85 #define DFPRINTF(args) ;
89 #ifdef WORDS_BIGENDIAN
90 #define _ENDIAN(x) (3-x)
92 #define _ENDIAN(x) (x)
96 #define BYTE_IN_LONG(x,b) ((x>>(8*_ENDIAN(b)))&0xff)
99 /***********************************************************************
100 * Extended Instruction Set/Indexed Literal Offset Mode *
101 * Set this macro to enable code generation with the extended *
102 * instruction set and the new Indexed Literal Offset Mode *
103 ***********************************************************************/
106 /***********************************************************************
107 * PIC status bits - this will move into device dependent headers
108 ***********************************************************************/
114 #define PIC_IRP_BIT 7 /* Indirect register page select */
116 /***********************************************************************
117 * PIC INTCON bits - this will move into device dependent headers
118 ***********************************************************************/
119 #define PIC_RBIF_BIT 0 /* Port B level has changed flag */
120 #define PIC_INTF_BIT 1 /* Port B bit 0 interrupt on edge flag */
121 #define PIC_T0IF_BIT 2 /* TMR0 has overflowed flag */
122 #define PIC_RBIE_BIT 3 /* Port B level has changed - Interrupt Enable */
123 #define PIC_INTE_BIT 4 /* Port B bit 0 interrupt on edge - Int Enable */
124 #define PIC_T0IE_BIT 5 /* TMR0 overflow Interrupt Enable */
125 #define PIC_PIE_BIT 6 /* Peripheral Interrupt Enable */
126 #define PIC_GIE_BIT 7 /* Global Interrupt Enable */
128 /***********************************************************************
129 * PIC bank definitions
130 ***********************************************************************/
131 #define PIC_BANK_FIRST 0
132 #define PIC_BANK_LAST 0xf
135 /***********************************************************************
137 ***********************************************************************/
143 /***********************************************************************
145 * PIC_OPTYPE - Operand types that are specific to the PIC architecture
147 * If a PIC assembly instruction has an operand then here is where we
148 * associate a type to it. For example,
152 * The movf has two operands: 'reg' and the W register. 'reg' is some
153 * arbitrary general purpose register, hence it has the type PO_GPR_REGISTER.
154 * The W register, which is the PIC's accumulator, has the type PO_W.
156 ***********************************************************************/
162 PO_NONE=0, // No operand e.g. NOP
163 PO_W, // The working register (as a destination)
164 PO_WREG, // The working register (as a file register)
165 PO_STATUS, // The 'STATUS' register
166 PO_BSR, // The 'BSR' register
167 PO_FSR0, // The "file select register" (in PIC18 family it's one
169 PO_INDF0, // The Indirect register
170 PO_INTCON, // Interrupt Control register
171 PO_GPR_REGISTER, // A general purpose register
172 PO_GPR_BIT, // A bit of a general purpose register
173 PO_GPR_TEMP, // A general purpose temporary register
174 PO_SFR_REGISTER, // A special function register (e.g. PORTA)
175 PO_PCL, // Program counter Low register
176 PO_PCLATH, // Program counter Latch high register
177 PO_PCLATU, // Program counter Latch upper register
178 PO_PRODL, // Product Register Low
179 PO_PRODH, // Product Register High
180 PO_LITERAL, // A constant
181 PO_REL_ADDR, // A relative address
182 PO_IMMEDIATE, // (8051 legacy)
183 PO_DIR, // Direct memory (8051 legacy)
184 PO_CRY, // bit memory (8051 legacy)
185 PO_BIT, // bit operand.
186 PO_STR, // (8051 legacy)
188 PO_WILD // Wild card operand in peep optimizer
192 /***********************************************************************
196 * This is not a list of the PIC's opcodes per se, but instead
197 * an enumeration of all of the different types of pic opcodes.
199 ***********************************************************************/
203 POC_WILD=-1, /* Wild card - used in the pCode peep hole optimizer
204 * to represent ANY pic opcode */
305 /***********************************************************************
306 * PC_TYPE - pCode Types
307 ***********************************************************************/
311 PC_COMMENT=0, /* pCode is a comment */
312 PC_INLINE, /* user's inline code */
313 PC_OPCODE, /* PORT dependent opcode */
314 PC_LABEL, /* assembly label */
315 PC_FLOW, /* flow analysis */
316 PC_FUNCTION, /* Function start or end */
317 PC_WILD, /* wildcard - an opcode place holder used
318 * in the pCode peep hole optimizer */
319 PC_CSOURCE, /* C-Source Line */
320 PC_ASMDIR, /* Assembler directive */
321 PC_BAD, /* Mark the pCode object as being bad */
322 PC_INFO /* pCode information node, used primarily in optimizing */
326 /***********************************************************************
327 * INFO_TYPE - information node types
328 ***********************************************************************/
332 INF_OPTIMIZATION, /* structure contains optimization information */
333 INF_LOCALREGS /* structure contains local register information */
338 /***********************************************************************
339 * OPT_TYPE - optimization node types
340 ***********************************************************************/
344 OPT_BEGIN, /* mark beginning of optimization block */
345 OPT_END, /* mark ending of optimization block */
346 OPT_JUMPTABLE_BEGIN, /* mark beginning of a jumptable */
347 OPT_JUMPTABLE_END /* mark end of jumptable */
350 /***********************************************************************
351 * LR_TYPE - optimization node types
352 ***********************************************************************/
356 LR_ENTRY_BEGIN, /* mark beginning of optimization block */
357 LR_ENTRY_END, /* mark ending of optimization block */
363 /************************************************/
364 /*************** Structures ********************/
365 /************************************************/
366 /* These are here as forward references - the
367 * full definition of these are below */
369 struct pCodeWildBlock;
370 struct pCodeRegLives;
372 /*************************************************
375 The first step in optimizing pCode is determining
376 the program flow. This information is stored in
377 single-linked lists in the for of 'from' and 'to'
378 objects with in a pcode. For example, most instructions
379 don't involve any branching. So their from branch
380 points to the pCode immediately preceding them and
381 their 'to' branch points to the pcode immediately
382 following them. A skip instruction is an example of
383 a pcode that has multiple (in this case two) elements
384 in the 'to' branch. A 'label' pcode is an where there
385 may be multiple 'from' branches.
386 *************************************************/
388 typedef struct pBranch
390 struct pCode *pc; // Next pCode in a branch
391 struct pBranch *next; /* If more than one branch
392 * the next one is here */
396 /*************************************************
399 pCode Operand structure.
400 For those assembly instructions that have arguments,
401 the pCode will have a pCodeOp in which the argument
402 can be stored. For example
406 'some_register' will be stored/referenced in a pCodeOp
408 *************************************************/
410 typedef struct pCodeOp
418 typedef struct pCodeOpBit
422 unsigned int inBitSpace: 1; /* True if in bit space, else
423 just a bit of a register */
427 typedef struct pCodeOpLit
431 pCodeOp *arg2; /* needed as pCodeOpLit and pCodeOpLit2 are not separable via their type (PO_LITERAL) */
434 typedef struct pCodeOpLit2
442 typedef struct pCodeOpImmd
445 int offset; /* low,high or upper byte of immediate value */
446 int index; /* add this to the immediate value */
447 unsigned _const:1; /* is in code space */
449 int rIdx; /* If this immd points to a register */
450 struct regs *r; /* then this is the reg. */
454 typedef struct pCodeOpLabel
460 typedef struct pCodeOpReg
462 pCodeOp pcop; // Can be either GPR or SFR
463 int rIdx; // Index into the register table
465 int instance; // byte # of Multi-byte registers
468 pCodeOp *pcop2; // second memory operand (NEEDED IN gen.c:pic16_popGet2p (pCodeOpReg casted into pCodeOpReg2)
471 typedef struct pCodeOpReg2
473 pCodeOp pcop; // used by default to all references
476 int instance; // assume same instance for both operands
479 pCodeOp *pcop2; // second memory operand
482 typedef struct pCodeOpRegBit
484 pCodeOpReg pcor; // The Register containing this bit
485 int bit; // 0-7 bit number.
486 PIC_OPTYPE subtype; // The type of this register.
487 unsigned int inBitSpace: 1; /* True if in bit space, else
488 just a bit of a register */
492 typedef struct pCodeOpWild
496 struct pCodeWildBlock *pcwb;
498 int id; /* index into an array of char *'s that will match
499 * the wild card. The array is in *pcp. */
500 pCodeOp *subtype; /* Pointer to the Operand type into which this wild
501 * card will be expanded */
502 pCodeOp *matched; /* When a wild matches, we'll store a pointer to the
503 * opcode we matched */
505 pCodeOp *pcop2; /* second operand if exists */
510 typedef struct pCodeOpOpt
514 OPT_TYPE type; /* optimization node type */
516 char *key; /* key by which a block is identified */
519 typedef struct pCodeOpLocalReg
526 /*************************************************
529 Here is the basic build block of a PIC instruction.
530 Each pic instruction will get allocated a pCode.
531 A linked list of pCodes makes a program.
533 **************************************************/
539 struct pCode *prev; // The pCode objects are linked together
540 struct pCode *next; // in doubly linked lists.
542 int seq; // sequence number
544 struct pBlock *pb; // The pBlock that contains this pCode.
546 /* "virtual functions"
547 * The pCode structure is like a base class
548 * in C++. The subsequent structures that "inherit"
549 * the pCode structure will initialize these function
550 * pointers to something useful */
551 // void (*analyze) (struct pCode *_this);
552 void (*destruct)(struct pCode *_this);
553 void (*print) (FILE *of,struct pCode *_this);
558 /*************************************************
560 **************************************************/
562 typedef struct pCodeComment
572 /*************************************************
574 **************************************************/
576 typedef struct pCodeCSource
588 /*************************************************
590 **************************************************/
592 /*************************************************
595 The Flow object is used as marker to separate
596 the assembly code into contiguous chunks. In other
597 words, everytime an instruction cause or potentially
598 causes a branch, a Flow object will be inserted into
599 the pCode chain to mark the beginning of the next
602 **************************************************/
603 struct defmap_s; // defined in pcode.c
605 typedef struct pCodeFlow
610 pCode *end; /* Last pCode in this flow. Note that
611 the first pCode is pc.next */
613 /* set **uses; * map the pCode instruction inCond and outCond conditions
614 * in this array of set's. The reason we allocate an
615 * array of pointers instead of declaring each type of
616 * usage is because there are port dependent usage definitions */
617 //int nuses; /* number of uses sets */
619 set *from; /* flow blocks that can send control to this flow block */
620 set *to; /* flow blocks to which this one can send control */
621 struct pCodeFlow *ancestor; /* The most immediate "single" pCodeFlow object that
622 * executes prior to this one. In many cases, this
623 * will be just the previous */
625 int inCond; /* Input conditions - stuff assumed defined at entry */
626 int outCond; /* Output conditions - stuff modified by flow block */
628 int firstBank; /* The first and last bank flags are the first and last */
629 int lastBank; /* register banks used within one flow object */
634 set *registers;/* Registers used in this flow */
636 struct defmap_s *defmap; /* chronologically ordered list of definitions performed
637 in this flow (most recent at the front) */
638 struct defmap_s *in_vals; /* definitions of all symbols reaching this flow
639 * symbols with multiple different definitions are stored
640 * with an assigned value of 0. */
641 struct defmap_s *out_vals; /* definitions valid AFTER thie flow */
645 /*************************************************
648 The Flow Link object is used to record information
649 about how consecutive excutive Flow objects are related.
650 The pCodeFlow objects demarcate the pCodeInstructions
651 into contiguous chunks. The FlowLink records conflicts
652 in the discontinuities. For example, if one Flow object
653 references a register in bank 0 and the next Flow object
654 references a register in bank 1, then there is a discontinuity
655 in the banking registers.
658 typedef struct pCodeFlowLink
660 pCodeFlow *pcflow; /* pointer to linked pCodeFlow object */
662 int bank_conflict; /* records bank conflicts */
666 /*************************************************
669 Here we describe all the facets of a PIC instruction
670 (expansion for the 18cxxx is also provided).
672 **************************************************/
674 typedef struct pCodeInstruction
679 PIC_OPCODE op; // The opcode of the instruction.
681 char const * const mnemonic; // Pointer to mnemonic string
683 char isize; // pCode instruction size
685 pBranch *from; // pCodes that execute before this one
686 pBranch *to; // pCodes that execute after
687 pBranch *label; // pCode instructions that have labels
689 pCodeOp *pcop; /* Operand, if this instruction has one */
690 pCodeFlow *pcflow; /* flow block to which this instruction belongs */
691 pCodeCSource *cline; /* C Source from which this instruction was derived */
693 unsigned int num_ops; /* Number of operands (0,1,2 for mid range pics) */
694 unsigned int isModReg: 1; /* If destination is W or F, then 1==F */
695 unsigned int isBitInst: 1; /* e.g. BCF */
696 unsigned int isBranch: 1; /* True if this is a branching instruction */
697 unsigned int isSkip: 1; /* True if this is a skip instruction */
698 unsigned int isLit: 1; /* True if this instruction has an literal operand */
699 unsigned int isAccess: 1; /* True if this instruction has an access RAM operand */
700 unsigned int isFastCall: 1; /* True if this instruction has a fast call/return mode select operand */
701 unsigned int is2MemOp: 1; /* True is second operand is a memory operand VR - support for MOVFF */
702 unsigned int is2LitOp: 1; /* True if instruction takes 2 literal operands VR - support for LFSR */
704 PIC_OPCODE inverted_op; /* Opcode of instruction that's the opposite of this one */
705 unsigned int inCond; // Input conditions for this instruction
706 unsigned int outCond; // Output conditions for this instruction
708 #define PCI_MAGIC 0x6e12
709 unsigned int pci_magic; // sanity check for pci initialization
714 /*************************************************
716 **************************************************/
718 typedef struct pCodeAsmDir
720 pCodeInstruction pci;
727 /*************************************************
729 **************************************************/
731 typedef struct pCodeLabel
738 int force; /* label cannot be optimized out */
742 /*************************************************
744 **************************************************/
746 typedef struct pCodeFunction
752 char *fname; /* If NULL, then this is the end of
753 a function. Otherwise, it's the
754 start and the name is contained
757 pBranch *from; // pCodes that execute before this one
758 pBranch *to; // pCodes that execute after
759 pBranch *label; // pCode instructions that have labels
761 int ncalled; /* Number of times function is called */
763 int absblock; /* hack to emulate a block pCodes in absolute position
764 but not inside a function */
765 int stackusage; /* stack positions used in function */
770 /*************************************************
772 **************************************************/
774 typedef struct pCodeWild
777 pCodeInstruction pci;
779 int id; /* Index into the wild card array of a peepBlock
780 * - this wild card will get expanded into that pCode
781 * that is stored at this index */
783 /* Conditions on wild pcode instruction */
784 int mustBeBitSkipInst:1;
785 int mustNotBeBitSkipInst:1;
786 int invertBitSkipInst:1;
788 pCodeOp *operand; // Optional operand
789 pCodeOp *label; // Optional label
794 /*************************************************
797 Here are stored generic informaton
798 *************************************************/
799 typedef struct pCodeInfo
801 pCodeInstruction pci;
803 INFO_TYPE type; /* info node type */
805 pCodeOp *oper1; /* info node arguments */
809 /*************************************************
812 Here are PIC program snippets. There's a strong
813 correlation between the eBBlocks and pBlocks.
814 SDCC subdivides a C program into managable chunks.
815 Each chunk becomes a eBBlock and ultimately in the
818 **************************************************/
820 typedef struct pBlock
822 memmap *cmemmap; /* The snippet is from this memmap */
823 char dbName; /* if cmemmap is NULL, then dbName will identify the block */
824 pCode *pcHead; /* A pointer to the first pCode in a link list of pCodes */
825 pCode *pcTail; /* A pointer to the last pCode in a link list of pCodes */
827 struct pBlock *next; /* The pBlocks will form a doubly linked list */
830 set *function_entries; /* dll of functions in this pblock */
836 unsigned visited:1; /* set true if traversed in call tree */
838 unsigned seq; /* sequence number of this pBlock */
842 /*************************************************
845 The collection of pBlock program snippets are
846 placed into a linked list that is implemented
847 in the pFile structure.
849 The pcode optimizer will parse the pFile.
851 **************************************************/
855 pBlock *pbHead; /* A pointer to the first pBlock */
856 pBlock *pbTail; /* A pointer to the last pBlock */
858 pBranch *functions; /* A SLL of functions in this pFile */
864 /*************************************************
867 The pCodeWildBlock object keeps track of the wild
868 variables, operands, and opcodes that exist in
870 **************************************************/
871 typedef struct pCodeWildBlock {
873 struct pCodePeep *pcp; // pointer back to ... I don't like this...
875 int nvars; // Number of wildcard registers in target.
876 char **vars; // array of pointers to them
878 int nops; // Number of wildcard operands in target.
879 pCodeOp **wildpCodeOps; // array of pointers to the pCodeOp's.
881 int nwildpCodes; // Number of wildcard pCodes in target/replace
882 pCode **wildpCodes; // array of pointers to the pCode's.
886 /*************************************************
889 The pCodePeep object mimics the peep hole optimizer
890 in the main SDCC src (e.g. SDCCpeeph.c). Essentially
891 there is a target pCode chain and a replacement
892 pCode chain. The target chain is compared to the
893 pCode that is generated by gen.c. If a match is
894 found then the pCode is replaced by the replacement
896 **************************************************/
897 typedef struct pCodePeep {
898 pCodeWildBlock target; // code we'd like to optimize
899 pCodeWildBlock replace; // and this is what we'll optimize it with.
902 //pBlock replace; // and this is what we'll optimize it with.
906 /* (Note: a wildcard register is a place holder. Any register
907 * can be replaced by the wildcard when the pcode is being
908 * compared to the target. */
910 /* Post Conditions. A post condition is a condition that
911 * must be either true or false before the peep rule is
912 * accepted. For example, a certain rule may be accepted
913 * if and only if the Z-bit is not used as an input to
914 * the subsequent instructions in a pCode chain.
916 unsigned int postFalseCond;
917 unsigned int postTrueCond;
921 /*************************************************
923 pCode peep command definitions
925 Here are some special commands that control the
926 way the peep hole optimizer behaves
928 **************************************************/
930 enum peepCommandTypes{
937 /*************************************************
938 peepCommand structure stores the peep commands.
940 **************************************************/
942 typedef struct peepCommand {
947 /*************************************************
950 **************************************************/
951 #define PCODE(x) ((pCode *)(x))
952 #define PCI(x) ((pCodeInstruction *)(x))
953 #define PCL(x) ((pCodeLabel *)(x))
954 #define PCF(x) ((pCodeFunction *)(x))
955 #define PCFL(x) ((pCodeFlow *)(x))
956 #define PCFLINK(x)((pCodeFlowLink *)(x))
957 #define PCW(x) ((pCodeWild *)(x))
958 #define PCCS(x) ((pCodeCSource *)(x))
959 #define PCAD(x) ((pCodeAsmDir *)(x))
960 #define PCINF(x) ((pCodeInfo *)(x))
962 #define PCOP(x) ((pCodeOp *)(x))
963 //#define PCOB(x) ((pCodeOpBit *)(x))
964 #define PCOL(x) ((pCodeOpLit *)(x))
965 #define PCOI(x) ((pCodeOpImmd *)(x))
966 #define PCOLAB(x) ((pCodeOpLabel *)(x))
967 #define PCOR(x) ((pCodeOpReg *)(x))
968 #define PCOR2(x) ((pCodeOpReg2 *)(x))
969 #define PCORB(x) ((pCodeOpRegBit *)(x))
970 #define PCOO(x) ((pCodeOpOpt *)(x))
971 #define PCOLR(x) ((pCodeOpLocalReg *)(x))
972 #define PCOW(x) ((pCodeOpWild *)(x))
973 #define PCOW2(x) (PCOW(PCOW(x)->pcop2))
974 #define PBR(x) ((pBranch *)(x))
976 #define PCWB(x) ((pCodeWildBlock *)(x))
980 macros for checking pCode types
982 #define isPCI(x) ((PCODE(x)->type == PC_OPCODE))
983 #define isPCI_BRANCH(x) ((PCODE(x)->type == PC_OPCODE) && PCI(x)->isBranch)
984 #define isPCI_SKIP(x) ((PCODE(x)->type == PC_OPCODE) && PCI(x)->isSkip)
985 #define isPCI_LIT(x) ((PCODE(x)->type == PC_OPCODE) && PCI(x)->isLit)
986 #define isPCI_BITSKIP(x)((PCODE(x)->type == PC_OPCODE) && PCI(x)->isSkip && PCI(x)->isBitInst)
987 #define isPCFL(x) ((PCODE(x)->type == PC_FLOW))
988 #define isPCF(x) ((PCODE(x)->type == PC_FUNCTION))
989 #define isPCL(x) ((PCODE(x)->type == PC_LABEL))
990 #define isPCW(x) ((PCODE(x)->type == PC_WILD))
991 #define isPCCS(x) ((PCODE(x)->type == PC_CSOURCE))
992 #define isPCAD(x) ((PCODE(x)->type == PC_ASMDIR))
993 #define isPCINFO(x) ((PCODE(x)->type == PC_INFO))
995 #define isCALL(x) ((isPCI(x)) && (PCI(x)->op == POC_CALL))
996 #define isSTATUS_REG(r) ((r)->pc_type == PO_STATUS)
997 #define isBSR_REG(r) ((r)->pc_type == PO_BSR)
998 #define isACCESS_BANK(r) (r->accessBank)
1002 #define isPCOLAB(x) ((PCOP(x)->type) == PO_LABEL)
1004 /*-----------------------------------------------------------------*
1006 *-----------------------------------------------------------------*/
1008 pCode *pic16_newpCode (PIC_OPCODE op, pCodeOp *pcop); // Create a new pCode given an operand
1009 pCode *pic16_newpCodeCharP(char *cP); // Create a new pCode given a char *
1010 pCode *pic16_newpCodeInlineP(char *cP); // Create a new pCode given a char *
1011 pCode *pic16_newpCodeFunction(char *g, char *f); // Create a new function
1012 pCode *pic16_newpCodeLabel(char *name,int key); // Create a new label given a key
1013 pCode *pic16_newpCodeLabelFORCE(char *name, int key); // Same as newpCodeLabel but label cannot be optimized out
1014 pCode *pic16_newpCodeCSource(int ln, char *f, char *l); // Create a new symbol line
1015 pBlock *pic16_newpCodeChain(memmap *cm,char c, pCode *pc); // Create a new pBlock
1016 void pic16_printpBlock(FILE *of, pBlock *pb); // Write a pBlock to a file
1017 void pic16_addpCode2pBlock(pBlock *pb, pCode *pc); // Add a pCode to a pBlock
1018 void pic16_addpBlock(pBlock *pb); // Add a pBlock to a pFile
1019 void pic16_copypCode(FILE *of, char dbName); // Write all pBlocks with dbName to *of
1020 void pic16_movepBlock2Head(char dbName); // move pBlocks around
1021 void pic16_AnalyzepCode(char dbName);
1022 void pic16_OptimizeLocalRegs(void);
1023 void pic16_AssignRegBanks(void);
1024 void pic16_printCallTree(FILE *of);
1025 void pCodePeepInit(void);
1026 void pic16_pBlockConvert2ISR(pBlock *pb);
1027 void pic16_pBlockConvert2Absolute(pBlock *pb);
1028 void pic16_initDB(void);
1029 void pic16_emitDB(int c, char ptype, void *p); // Add DB directives to a pBlock
1030 void pic16_emitDS(char *s, char ptype, void *p);
1031 void pic16_flushDB(char ptype, void *p); // Add pending DB data to a pBlock
1033 pCode *pic16_newpCodeAsmDir(char *asdir, char *argfmt, ...);
1035 pCodeOp *pic16_newpCodeOpLabel(char *name, int key);
1036 pCodeOp *pic16_newpCodeOpImmd(char *name, int offset, int index, int code_space);
1037 pCodeOp *pic16_newpCodeOpLit(int lit);
1038 pCodeOp *pic16_newpCodeOpLit2(int lit, pCodeOp *arg2);
1039 pCodeOp *pic16_newpCodeOpBit(char *name, int bit,int inBitSpace, PIC_OPTYPE subt);
1040 pCodeOp *pic16_newpCodeOpBit_simple (struct asmop *op, int offs, int bit);
1041 pCodeOp *pic16_newpCodeOpRegFromStr(char *name);
1042 pCodeOp *pic16_newpCodeOpReg(int rIdx);
1043 pCodeOp *pic16_newpCodeOp(char *name, PIC_OPTYPE p);
1044 pCodeOp *pic16_newpCodeOpRegNotVect(bitVect *bv);
1045 pCodeOp *pic16_pCodeOpCopy(pCodeOp *pcop);
1047 pCode *pic16_newpCodeInfo(INFO_TYPE type, pCodeOp *pcop);
1048 pCodeOp *pic16_newpCodeOpOpt(OPT_TYPE type, char *key);
1049 pCodeOp *pic16_newpCodeOpLocalRegs(LR_TYPE type);
1050 pCodeOp *pic16_newpCodeOpReg(int rIdx);
1052 pCode * pic16_findNextInstruction(pCode *pci);
1053 pCode * pic16_findNextpCode(pCode *pc, PC_TYPE pct);
1054 int pic16_isPCinFlow(pCode *pc, pCode *pcflow);
1055 struct regs * pic16_getRegFromInstruction(pCode *pc);
1056 struct regs * pic16_getRegFromInstruction2(pCode *pc);
1057 char *pic16_get_op(pCodeOp *pcop,char *buffer, size_t size);
1058 char *pic16_get_op2(pCodeOp *pcop,char *buffer, size_t size);
1059 char *dumpPicOptype(PIC_OPTYPE type);
1061 extern void pic16_pcode_test(void);
1062 extern int pic16_debug_verbose;
1063 extern int pic16_pcode_verbose;
1065 extern char *LR_TYPE_STR[];
1069 //#define debugf(frm, rest...) _debugf(__FILE__, __LINE__, frm, rest)
1070 #define debugf(frm, rest) _debugf(__FILE__, __LINE__, frm, rest)
1071 #define debugf2(frm, arg1, arg2) _debugf(__FILE__, __LINE__, frm, arg1, arg2)
1072 #define debugf3(frm, arg1, arg2, arg3) _debugf(__FILE__, __LINE__, frm, arg1, arg2, arg3)
1076 extern void _debugf(char *f, int l, char *frm, ...);
1079 /*-----------------------------------------------------------------*
1081 *-----------------------------------------------------------------*/
1083 extern pCodeOpReg pic16_pc_status;
1084 extern pCodeOpReg pic16_pc_intcon;
1085 extern pCodeOpReg pic16_pc_pcl;
1086 extern pCodeOpReg pic16_pc_pclath;
1087 extern pCodeOpReg pic16_pc_pclatu;
1088 extern pCodeOpReg pic16_pc_wreg;
1089 extern pCodeOpReg pic16_pc_tosl;
1090 extern pCodeOpReg pic16_pc_tosh;
1091 extern pCodeOpReg pic16_pc_tosu;
1092 extern pCodeOpReg pic16_pc_tblptrl;
1093 extern pCodeOpReg pic16_pc_tblptrh;
1094 extern pCodeOpReg pic16_pc_tblptru;
1095 extern pCodeOpReg pic16_pc_tablat;
1096 extern pCodeOpReg pic16_pc_bsr;
1097 extern pCodeOpReg pic16_pc_fsr0;
1098 extern pCodeOpReg pic16_pc_fsr0l;
1099 extern pCodeOpReg pic16_pc_fsr0h;
1100 extern pCodeOpReg pic16_pc_fsr1l;
1101 extern pCodeOpReg pic16_pc_fsr1h;
1102 extern pCodeOpReg pic16_pc_fsr2l;
1103 extern pCodeOpReg pic16_pc_fsr2h;
1104 extern pCodeOpReg pic16_pc_indf0;
1105 extern pCodeOpReg pic16_pc_postinc0;
1106 extern pCodeOpReg pic16_pc_postdec0;
1107 extern pCodeOpReg pic16_pc_preinc0;
1108 extern pCodeOpReg pic16_pc_plusw0;
1109 extern pCodeOpReg pic16_pc_indf1;
1110 extern pCodeOpReg pic16_pc_postinc1;
1111 extern pCodeOpReg pic16_pc_postdec1;
1112 extern pCodeOpReg pic16_pc_preinc1;
1113 extern pCodeOpReg pic16_pc_plusw1;
1114 extern pCodeOpReg pic16_pc_indf2;
1115 extern pCodeOpReg pic16_pc_postinc2;
1116 extern pCodeOpReg pic16_pc_postdec2;
1117 extern pCodeOpReg pic16_pc_preinc2;
1118 extern pCodeOpReg pic16_pc_plusw2;
1119 extern pCodeOpReg pic16_pc_prodl;
1120 extern pCodeOpReg pic16_pc_prodh;
1122 extern pCodeOpReg pic16_pc_eecon1;
1123 extern pCodeOpReg pic16_pc_eecon2;
1124 extern pCodeOpReg pic16_pc_eedata;
1125 extern pCodeOpReg pic16_pc_eeadr;
1127 extern pCodeOpReg pic16_pc_kzero;
1128 extern pCodeOpReg pic16_pc_wsave; /* wsave and ssave are used to save W and the Status */
1129 extern pCodeOpReg pic16_pc_ssave; /* registers during an interrupt */
1131 extern pCodeOpReg *pic16_stackpnt_lo;
1132 extern pCodeOpReg *pic16_stackpnt_hi;
1133 extern pCodeOpReg *pic16_stack_postinc;
1134 extern pCodeOpReg *pic16_stack_postdec;
1135 extern pCodeOpReg *pic16_stack_preinc;
1136 extern pCodeOpReg *pic16_stack_plusw;
1138 extern pCodeOpReg *pic16_framepnt_lo;
1139 extern pCodeOpReg *pic16_framepnt_hi;
1140 extern pCodeOpReg *pic16_frame_postinc;
1141 extern pCodeOpReg *pic16_frame_postdec;
1142 extern pCodeOpReg *pic16_frame_preinc;
1143 extern pCodeOpReg *pic16_frame_plusw;
1145 extern pCodeOpReg pic16_pc_gpsimio;
1146 extern pCodeOpReg pic16_pc_gpsimio2;
1148 #endif // __PCODE_H__