1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007,2008 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
22 ***************************************************************************/
26 #include "binarybuffer.h"
30 #ifdef _DEBUG_JTAG_IO_
31 #define DEBUG_JTAG_IO(expr ...) LOG_DEBUG(expr)
33 #define DEBUG_JTAG_IO(expr ...)
36 #ifndef DEBUG_JTAG_IOZ
37 #define DEBUG_JTAG_IOZ 64
40 /*-----<Macros>--------------------------------------------------*/
43 * When given an array, compute its DIMension; in other words, the
44 * number of elements in the array
46 #define DIM(x) (sizeof(x)/sizeof((x)[0]))
48 /** Calculate the number of bytes required to hold @a n TAP scan bits */
49 #define TAP_SCAN_BYTES(n) CEIL(n, 8)
51 /*-----</Macros>-------------------------------------------------*/
54 * Defines JTAG Test Access Port states.
56 * These definitions were gleaned from the ARM7TDMI-S Technical
57 * Reference Manual and validated against several other ARM core
58 * technical manuals. tap_get_tms_path() is sensitive to this numbering
59 * and ordering of the TAP states; furthermore, some interfaces require
60 * specific numbers be used, as they are handed-off directly to their
61 * hardware implementations.
63 typedef enum tap_state
66 /* These are the old numbers. Leave as-is for now... */
67 TAP_RESET = 0, TAP_IDLE = 8,
68 TAP_DRSELECT = 1, TAP_DRCAPTURE = 2, TAP_DRSHIFT = 3, TAP_DREXIT1 = 4,
69 TAP_DRPAUSE = 5, TAP_DREXIT2 = 6, TAP_DRUPDATE = 7,
70 TAP_IRSELECT = 9, TAP_IRCAPTURE = 10, TAP_IRSHIFT = 11, TAP_IREXIT1 = 12,
71 TAP_IRPAUSE = 13, TAP_IREXIT2 = 14, TAP_IRUPDATE = 15,
73 TAP_NUM_STATES = 16, TAP_INVALID = -1,
75 /* Proper ARM recommended numbers */
93 TAP_NUM_STATES = 0x10,
100 * Function tap_state_name
101 * Returns a string suitable for display representing the JTAG tap_state
103 const char* tap_state_name(tap_state_t state);
105 /// The current TAP state of the pending JTAG command queue.
106 extern tap_state_t cmd_queue_cur_state;
109 * This structure defines a single scan field in the scan. It provides
110 * fields for the field's width and pointers to scan input and output
113 * In addition, this structure includes a value and mask that is used by
114 * jtag_add_dr_scan_check() to validate the value that was scanned out.
116 * The allocated, modified, and intmp fields are internal work space.
118 typedef struct scan_field_s
120 /// A pointer to the tap structure to which this field refers.
123 /// The number of bits this field specifies (up to 32)
125 /// A pointer to value to be scanned into the device
127 /// A pointer to a 32-bit memory location for data scanned out
130 /// The value used to check the data scanned out.
132 /// The mask to go with check_value
135 /// in_value has been allocated for the queue
137 /// Indicates we modified the in_value.
139 /// temporary storage for performing value checks synchronously
143 typedef struct jtag_tap_event_action_s jtag_tap_event_action_t;
145 /* this is really: typedef jtag_tap_t */
146 /* But - the typedef is done in "types.h" */
147 /* due to "forward decloration reasons" */
152 const char* dotted_name;
153 int abs_chain_position;
154 /// Is this TAP enabled?
156 int ir_length; /**< size of instruction register */
157 u32 ir_capture_value;
158 u8* expected; /**< Capture-IR expected value */
160 u8* expected_mask; /**< Capture-IR expected mask */
162 /**< device identification code */
164 /// Array of expected identification codes */
166 /// Number of expected identification codes
169 /// current instruction
171 /// Bypass register selected
174 jtag_tap_event_action_t *event_action;
176 jtag_tap_t* next_tap;
178 extern jtag_tap_t* jtag_all_taps(void);
179 extern const char *jtag_tap_name(const jtag_tap_t *tap);
180 extern jtag_tap_t* jtag_tap_by_string(const char* dotted_name);
181 extern jtag_tap_t* jtag_tap_by_jim_obj(Jim_Interp* interp, Jim_Obj* obj);
182 extern jtag_tap_t* jtag_tap_by_position(unsigned abs_position);
183 extern jtag_tap_t* jtag_tap_next_enabled(jtag_tap_t* p);
184 extern unsigned jtag_tap_count_enabled(void);
185 extern unsigned jtag_tap_count(void);
188 enum reset_line_mode {
189 LINE_OPEN_DRAIN = 0x0,
190 LINE_PUSH_PULL = 0x1,
194 * There are three cases when JTAG_TRST_ASSERTED callback is invoked. The
195 * event is invoked *after* TRST is asserted(or queued rather). It is illegal
196 * to communicate with the JTAG interface during the callback(as there is
197 * currently a queue being built).
208 enum jtag_tap_event {
209 JTAG_TAP_EVENT_ENABLE,
210 JTAG_TAP_EVENT_DISABLE
213 struct jtag_tap_event_action_s
215 enum jtag_tap_event event;
217 jtag_tap_event_action_t* next;
220 /// @returns The current state of TRST.
221 int jtag_get_trst(void);
222 /// @returns The current state of SRST.
223 int jtag_get_srst(void);
226 * Defines the function signature requide for JTAG event callback
227 * functions, which are added with jtag_register_event_callback()
228 * and removed jtag_unregister_event_callback().
229 * @param event The event to handle.
230 * @param prive A pointer to data that was passed to
231 * jtag_register_event_callback().
232 * @returns Must return ERROR_OK on success, or an error code on failure.
234 * @todo Change to return void or define a use for its return code.
236 typedef int (*jtag_event_handler_t)(enum jtag_event event, void* priv);
238 extern int jtag_register_event_callback(jtag_event_handler_t f, void *x);
239 extern int jtag_unregister_event_callback(jtag_event_handler_t f);
241 extern int jtag_call_event_callbacks(enum jtag_event event);
244 /// @returns The current JTAG speed setting.
245 int jtag_get_speed(void);
247 * Given a @a speed setting, use the interface @c speed_div callback to
248 * adjust the setting.
249 * @param speed The speed setting to convert back to readable KHz.
250 * @returns ERROR_OK if the interface has not been initialized or on success;
251 * otherwise, the error code produced by the @c speed_div callback.
253 int jtag_get_speed_readable(int *speed);
255 * Set the JTAG speed. This routine will call the underlying
256 * interface @c speed callback, if the interface has been initialized.
257 * @param speed The new speed setting.
258 * @returns ERROR_OK during configuration or on success, or an error
259 * code returned from the interface @c speed callback.
261 int jtag_set_speed(int speed);
265 RESET_HAS_TRST = 0x1,
266 RESET_HAS_SRST = 0x2,
267 RESET_TRST_AND_SRST = 0x3,
268 RESET_SRST_PULLS_TRST = 0x4,
269 RESET_TRST_PULLS_SRST = 0x8,
270 RESET_TRST_OPEN_DRAIN = 0x10,
271 RESET_SRST_PUSH_PULL = 0x20,
274 enum reset_types jtag_get_reset_config(void);
275 void jtag_set_reset_config(enum reset_types type);
278 * Initialize interface upon startup. Return a successful no-op upon
279 * subsequent invocations.
281 extern int jtag_interface_init(struct command_context_s* cmd_ctx);
283 /// Shutdown the JTAG interface upon program exit.
284 extern int jtag_interface_quit(void);
287 * Initialize JTAG chain using only a RESET reset. If init fails,
290 extern int jtag_init(struct command_context_s* cmd_ctx);
292 /// reset, then initialize JTAG chain
293 extern int jtag_init_reset(struct command_context_s* cmd_ctx);
294 extern int jtag_register_commands(struct command_context_s* cmd_ctx);
298 * The JTAG interface can be implemented with a software or hardware fifo.
300 * TAP_DRSHIFT and TAP_IRSHIFT are illegal end states; however,
301 * TAP_DRSHIFT/IRSHIFT can be emulated as end states, by using longer
304 * Code that is relatively insensitive to the path taken through state
305 * machine (as long as it is JTAG compliant) can use @a endstate for
306 * jtag_add_xxx_scan(). Otherwise, the pause state must be specified as
307 * end state and a subsequent jtag_add_pathmove() must be issued.
311 * Generate an IR SCAN with a list of scan fields with one entry for
314 * If the input field list contains an instruction value for a TAP then
315 * that is used otherwise the TAP is set to bypass.
317 * TAPs for which no fields are passed are marked as bypassed for
318 * subsequent DR SCANs.
321 extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
323 * The same as jtag_add_ir_scan except no verification is performed out
326 extern void jtag_add_ir_scan_noverify(int num_fields, const scan_field_t *fields, tap_state_t state);
328 * Duplicate the scan fields passed into the function into an IR SCAN
329 * command. This function assumes that the caller handles extra fields
332 extern void jtag_add_plain_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
336 * Set in_value to point to 32 bits of memory to scan into. This
337 * function is a way to handle the case of synchronous and asynchronous
340 * In the event of an asynchronous queue execution the queue buffer
341 * allocation method is used, for the synchronous case the temporary 32
342 * bits come from the input field itself.
344 extern void jtag_alloc_in_value32(scan_field_t *field);
347 * Generate a DR SCAN using the fields passed to the function.
348 * For connected TAPs, the function checks in_fields and uses fields
349 * specified there. For bypassed TAPs, the function generates a dummy
350 * 1-bit field. The bypass status of TAPs is set by jtag_add_ir_scan().
352 extern void jtag_add_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
353 /// A version of jtag_add_dr_scan() that uses the check_value/mask fields
354 extern void jtag_add_dr_scan_check(int num_fields, scan_field_t* fields, tap_state_t endstate);
356 * Duplicate the scan fields passed into the function into a DR SCAN
357 * command. Unlike jtag_add_dr_scan(), this function assumes that the
358 * caller handles extra fields for bypassed TAPs.
360 extern void jtag_add_plain_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
364 * Defines a simple JTAG callback that can allow conversions on data
365 * scanned in from an interface.
367 * This callback should only be used for conversion that cannot fail.
368 * For conversion types or checks that can fail, use the more complete
369 * variant: jtag_callback_t.
371 typedef void (*jtag_callback1_t)(u8 *in);
373 /// A simpler version of jtag_add_callback4().
374 extern void jtag_add_callback(jtag_callback1_t, u8 *in);
378 * Defines the type of data passed to the jtag_callback_t interface.
379 * The underlying type must allow storing an @c int or pointer type.
381 typedef intptr_t jtag_callback_data_t;
384 * Defines the interface of the JTAG callback mechanism.
386 * @param in the pointer to the data clocked in
387 * @param data1 An integer big enough to use as an @c int or a pointer.
388 * @param data2 An integer big enough to use as an @c int or a pointer.
389 * @param data3 An integer big enough to use as an @c int or a pointer.
390 * @returns an error code
392 typedef int (*jtag_callback_t)(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3);
396 * This callback can be executed immediately the queue has been flushed.
398 * The JTAG queue can be executed synchronously or asynchronously.
399 * Typically for USB, the queue is executed asynchronously. For
400 * low-latency interfaces, the queue may be executed synchronously.
402 * The callback mechanism is very general and does not make many
403 * assumptions about what the callback does or what its arguments are.
404 * These callbacks are typically executed *after* the *entire* JTAG
405 * queue has been executed for e.g. USB interfaces, and they are
406 * guaranteeed to be invoked in the order that they were queued.
408 * If the execution of the queue fails before the callbacks, then --
409 * depending on driver implementation -- the callbacks may or may not be
410 * invoked. @todo Can we make this behavior consistent?
412 * The strange name is due to C's lack of overloading using function
415 * @param f The callback function to add.
416 * @param in Typically used to point to the data to operate on.
417 * Frequently this will be the data clocked in during a shift operation.
418 * @param data1 An integer big enough to use as an @c int or a pointer.
419 * @param data2 An integer big enough to use as an @c int or a pointer.
420 * @param data3 An integer big enough to use as an @c int or a pointer.
423 extern void jtag_add_callback4(jtag_callback_t f, u8 *in,
424 jtag_callback_data_t data1, jtag_callback_data_t data2,
425 jtag_callback_data_t data3);
429 * Run a TAP_RESET reset where the end state is TAP_RESET,
430 * regardless of the start state.
432 extern void jtag_add_tlr(void);
435 * Application code *must* assume that interfaces will
436 * implement transitions between states with different
437 * paths and path lengths through the state diagram. The
438 * path will vary across interface and also across versions
439 * of the same interface over time. Even if the OpenOCD code
440 * is unchanged, the actual path taken may vary over time
441 * and versions of interface firmware or PCB revisions.
443 * Use jtag_add_pathmove() when specific transition sequences
446 * Do not use jtag_add_pathmove() unless you need to, but do use it
449 * DANGER! If the target is dependent upon a particular sequence
450 * of transitions for things to work correctly(e.g. as a workaround
451 * for an errata that contradicts the JTAG standard), then pathmove
452 * must be used, even if some jtag interfaces happen to use the
453 * desired path. Worse, the jtag interface used for testing a
454 * particular implementation, could happen to use the "desired"
455 * path when transitioning to/from end
458 * A list of unambigious single clock state transitions, not
459 * all drivers can support this, but it is required for e.g.
460 * XScale and Xilinx support
462 * Note! TAP_RESET must not be used in the path!
464 * Note that the first on the list must be reachable
465 * via a single transition from the current state.
467 * All drivers are required to implement jtag_add_pathmove().
468 * However, if the pathmove sequence can not be precisely
469 * executed, an interface_jtag_add_pathmove() or jtag_execute_queue()
470 * must return an error. It is legal, but not recommended, that
471 * a driver returns an error in all cases for a pathmove if it
472 * can only implement a few transitions and therefore
473 * a partial implementation of pathmove would have little practical
476 * If an error occurs, jtag_error will contain one of these error codes:
477 * - ERROR_JTAG_NOT_STABLE_STATE -- The final state was not stable.
478 * - ERROR_JTAG_STATE_INVALID -- The path passed through TAP_RESET.
479 * - ERROR_JTAG_TRANSITION_INVALID -- The path includes invalid
482 extern void jtag_add_pathmove(int num_states, const tap_state_t* path);
485 * jtag_add_statemove() moves from the current state to @a goal_state.
487 * @param goal_state The final TAP state.
488 * @return ERROR_OK on success, or an error code on failure.
490 * Moves from the current state to the goal \a state.
492 * This needs to be handled according to the xsvf spec, see the XSTATE
493 * command description. From the XSVF spec, pertaining to XSTATE:
495 * For special states known as stable states (Test-Logic-Reset,
496 * Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
497 * predefined TAP state paths when the starting state is a stable state
498 * and when the XSTATE specifies a new stable state. See the STATE
499 * command in the [Ref 5] for the TAP state paths between stable
502 * For non-stable states, XSTATE should specify a state that is only one
503 * TAP state transition distance from the current TAP state to avoid
504 * undefined TAP state paths. A sequence of multiple XSTATE commands can
505 * be issued to transition the TAP through a specific state path.
507 * @note Unless @c tms_bits holds a path that agrees with [Ref 5] in the
508 * above spec, then this code is not fully conformant to the xsvf spec.
509 * This puts a burden on tap_get_tms_path() function from the xsvf spec.
510 * If in doubt, you should confirm that that burden is being met.
512 * Otherwise, @a goal_state must be immediately reachable in one clock
513 * cycle, and does not need to be a stable state.
515 extern int jtag_add_statemove(tap_state_t goal_state);
518 * Goes to TAP_IDLE (if we're not already there), cycle
519 * precisely num_cycles in the TAP_IDLE state, after which move
520 * to @a endstate (unless it is also TAP_IDLE).
522 * @param num_cycles Number of cycles in TAP_IDLE state. This argument
523 * may be 0, in which case this routine will navigate to @a endstate
525 * @param endstate The final state.
527 extern void jtag_add_runtest(int num_cycles, tap_state_t endstate);
530 * A reset of the TAP state machine can be requested.
532 * Whether tms or trst reset is used depends on the capabilities of
533 * the target and jtag interface(reset_config command configures this).
535 * srst can driver a reset of the TAP state machine and vice
538 * Application code may need to examine value of jtag_reset_config
539 * to determine the proper codepath
541 * DANGER! Even though srst drives trst, trst might not be connected to
542 * the interface, and it might actually be *harmful* to assert trst in this case.
544 * This is why combinations such as "reset_config srst_only srst_pulls_trst"
547 * only req_tlr_or_trst and srst can have a transition for a
548 * call as the effects of transitioning both at the "same time"
549 * are undefined, but when srst_pulls_trst or vice versa,
550 * then trst & srst *must* be asserted together.
552 extern void jtag_add_reset(int req_tlr_or_trst, int srst);
556 * Function jtag_set_end_state
558 * Set a global variable to \a state if \a state != TAP_INVALID.
560 * Return the value of the global variable.
563 extern tap_state_t jtag_set_end_state(tap_state_t state);
565 * Function jtag_get_end_state
567 * Return the value of the global variable for end state
570 extern tap_state_t jtag_get_end_state(void);
571 extern void jtag_add_sleep(u32 us);
575 * Function jtag_add_stable_clocks
576 * first checks that the state in which the clocks are to be issued is
577 * stable, then queues up clock_count clocks for transmission.
579 void jtag_add_clocks(int num_cycles);
583 * For software FIFO implementations, the queued commands can be executed
584 * during this call or earlier. A sw queue might decide to push out
585 * some of the jtag_add_xxx() operations once the queue is "big enough".
587 * This fn will return an error code if any of the prior jtag_add_xxx()
588 * calls caused a failure, e.g. check failure. Note that it does not
589 * matter if the operation was executed *before* jtag_execute_queue(),
590 * jtag_execute_queue() will still return an error code.
592 * All jtag_add_xxx() calls that have in_handler!=NULL will have been
593 * executed when this fn returns, but if what has been queued only
594 * clocks data out, without reading anything back, then JTAG could
595 * be running *after* jtag_execute_queue() returns. The API does
596 * not define a way to flush a hw FIFO that runs *after*
597 * jtag_execute_queue() returns.
599 * jtag_add_xxx() commands can either be executed immediately or
600 * at some time between the jtag_add_xxx() fn call and jtag_execute_queue().
602 extern int jtag_execute_queue(void);
604 /* same as jtag_execute_queue() but does not clear the error flag */
605 extern void jtag_execute_queue_noclear(void);
608 * Set the current JTAG core execution error, unless one was set
609 * by a previous call previously. Driver or application code must
610 * use jtag_error_clear to reset jtag_error once this routine has been
611 * called with a non-zero error code.
613 void jtag_set_error(int error);
614 /// @returns The current value of jtag_error
615 int jtag_get_error(void);
617 * Resets jtag_error to ERROR_OK, returning its previous value.
618 * @returns The previous value of @c jtag_error.
620 int jtag_error_clear(void);
622 /* can be implemented by hw+sw */
623 extern int jtag_power_dropout(int* dropout);
624 extern int jtag_srst_asserted(int* srst_asserted);
626 /* JTAG support functions */
629 * Execute jtag queue and check value with an optional mask.
630 * @param field Pointer to scan field.
631 * @param value Pointer to scan value.
632 * @param mask Pointer to scan mask; may be NULL.
633 * @returns Nothing, but calls jtag_set_error() on any error.
635 extern void jtag_check_value_mask(scan_field_t *field, u8 *value, u8 *mask);
637 extern void jtag_sleep(u32 us);
640 * The JTAG subsystem defines a number of error codes,
641 * using codes between -100 and -199.
643 #define ERROR_JTAG_INIT_FAILED (-100)
644 #define ERROR_JTAG_INVALID_INTERFACE (-101)
645 #define ERROR_JTAG_NOT_IMPLEMENTED (-102)
646 #define ERROR_JTAG_TRST_ASSERTED (-103)
647 #define ERROR_JTAG_QUEUE_FAILED (-104)
648 #define ERROR_JTAG_NOT_STABLE_STATE (-105)
649 #define ERROR_JTAG_DEVICE_ERROR (-107)
650 #define ERROR_JTAG_STATE_INVALID (-108)
651 #define ERROR_JTAG_TRANSITION_INVALID (-109)
654 * jtag_add_dr_out() is a version of jtag_add_dr_scan() which
655 * only scans data out. It operates on 32 bit integers instead
656 * of 8 bit, which makes it a better impedance match with
657 * the calling code which often operate on 32 bit integers.
659 * Current or end_state can not be TAP_RESET. end_state can be TAP_INVALID
661 * num_bits[i] is the number of bits to clock out from value[i] LSB first.
663 * If the device is in bypass, then that is an error condition in
664 * the caller code that is not detected by this fn, whereas
665 * jtag_add_dr_scan() does detect it. Similarly if the device is not in
666 * bypass, data must be passed to it.
668 * If anything fails, then jtag_error will be set and jtag_execute() will
669 * return an error. There is no way to determine if there was a failure
670 * during this function call.
672 * This is an inline fn to speed up embedded hosts. Also note that
673 * interface_jtag_add_dr_out() can be a *small* inline function for
676 * There is no jtag_add_dr_outin() version of this fn that also allows
677 * clocking data back in. Patches gladly accepted!
679 extern void jtag_add_dr_out(jtag_tap_t* tap,
680 int num_fields, const int* num_bits, const u32* value,
681 tap_state_t end_state);
684 /// @returns the number of times the scan queue has been flushed
685 int jtag_get_flush_queue_count(void);
687 void jtag_set_nsrst_delay(unsigned delay);
688 unsigned jtag_get_nsrst_delay(void);
690 void jtag_set_ntrst_delay(unsigned delay);
691 unsigned jtag_get_ntrst_delay(void);
693 int jtag_config_khz(unsigned khz);
694 void jtag_set_speed_khz(unsigned speed);
695 unsigned jtag_get_speed_khz(void);
697 void jtag_set_verify(bool enable);
698 bool jtag_will_verify(void);
700 void jtag_set_verify_capture_ir(bool enable);
701 bool jtag_will_verify_capture_ir(void);