1 /***************************************************************************
2 * Copyright (C) 2007 by Juergen Stuber <juergen@jstuber.net> *
3 * based on Dominic Rath's and Benedikt Sauter's usbprog.c *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2011 by Jean-Christophe PLAGNIOL-VIILARD *
9 * plagnioj@jcrosoft.com *
11 * Copyright (C) 2015 by Marc Schink *
12 * openocd-dev@marcschink.de *
14 * Copyright (C) 2015 by Paul Fertser *
15 * fercerpav@gmail.com *
17 * Copyright (C) 2015-2017 by Forest Crossman *
20 * This program is free software; you can redistribute it and/or modify *
21 * it under the terms of the GNU General Public License as published by *
22 * the Free Software Foundation; either version 2 of the License, or *
23 * (at your option) any later version. *
25 * This program is distributed in the hope that it will be useful, *
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
28 * GNU General Public License for more details. *
30 * You should have received a copy of the GNU General Public License *
31 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
32 ***************************************************************************/
42 #include <jtag/interface.h>
44 #include <jtag/commands.h>
46 #include "libusb_helper.h"
54 #define CONTROL_TYPE_READ 0x01
55 #define CONTROL_TYPE_WRITE 0x02
57 #define CONTROL_COMMAND_PROGRAM 0x07
59 #define CONTROL_MODE_POLL_PROGRAMMER_STATUS 0x01
60 #define CONTROL_MODE_RESET_TARGET 0x04
61 #define CONTROL_MODE_SET_PROGRAMMER_PROTOCOL 0x40
62 #define CONTROL_MODE_SYNCHRONIZE_TRANSFER 0x41
63 #define CONTROL_MODE_ACQUIRE_SWD_TARGET 0x42
64 #define CONTROL_MODE_SEND_SWD_SEQUENCE 0x43
66 #define PROTOCOL_JTAG 0x00
67 #define PROTOCOL_SWD 0x01
69 #define DEVICE_PSOC4 0x00
70 #define DEVICE_PSOC3 0x01
71 #define DEVICE_UNKNOWN 0x02
72 #define DEVICE_PSOC5 0x03
74 #define ACQUIRE_MODE_RESET 0x00
75 #define ACQUIRE_MODE_POWER_CYCLE 0x01
77 #define SEQUENCE_LINE_RESET 0x00
78 #define SEQUENCE_JTAG_TO_SWD 0x01
80 #define PROGRAMMER_NOK_NACK 0x00
81 #define PROGRAMMER_OK_ACK 0x01
83 #define HID_TYPE_WRITE 0x00
84 #define HID_TYPE_READ 0x01
85 #define HID_TYPE_START 0x02
87 #define HID_COMMAND_POWER 0x80
88 #define HID_COMMAND_VERSION 0x81
89 #define HID_COMMAND_RESET 0x82
90 #define HID_COMMAND_CONFIGURE 0x8f
91 #define HID_COMMAND_BOOTLOADER 0xa0
93 /* 512 bytes seems to work reliably */
94 #define SWD_MAX_BUFFER_LENGTH 512
97 hid_device *hid_handle;
98 struct libusb_device_handle *usb_handle;
100 uint16_t packet_index;
101 uint8_t *packet_buffer;
103 uint8_t hardware_version;
104 uint8_t minor_version;
105 uint8_t major_version;
108 bool supports_jtag_to_swd;
111 struct pending_transfer_result {
117 static bool kitprog_init_acquire_psoc;
119 static int pending_transfer_count, pending_queue_len;
120 static struct pending_transfer_result *pending_transfers;
122 static int queued_retval;
124 static struct kitprog *kitprog_handle;
126 static int kitprog_usb_open(void);
127 static void kitprog_usb_close(void);
129 static int kitprog_hid_command(uint8_t *command, size_t command_length,
130 uint8_t *data, size_t data_length);
131 static int kitprog_get_version(void);
132 static int kitprog_get_millivolts(void);
133 static int kitprog_get_info(void);
134 static int kitprog_set_protocol(uint8_t protocol);
135 static int kitprog_get_status(void);
136 static int kitprog_set_unknown(void);
137 static int kitprog_acquire_psoc(uint8_t psoc_type, uint8_t acquire_mode,
138 uint8_t max_attempts);
139 static int kitprog_reset_target(void);
140 static int kitprog_swd_sync(void);
141 static int kitprog_swd_seq(uint8_t seq_type);
143 static int kitprog_generic_acquire(void);
145 static int kitprog_swd_run_queue(void);
146 static void kitprog_swd_queue_cmd(uint8_t cmd, uint32_t *dst, uint32_t data);
147 static int kitprog_swd_switch_seq(enum swd_special_seq seq);
150 static inline int mm_to_version(uint8_t major, uint8_t minor)
152 return (major << 8) | minor;
155 static int kitprog_init(void)
159 kitprog_handle = malloc(sizeof(struct kitprog));
160 if (!kitprog_handle) {
161 LOG_ERROR("Failed to allocate memory");
165 if (kitprog_usb_open() != ERROR_OK) {
166 LOG_ERROR("Can't find a KitProg device! Please check device connections and permissions.");
167 return ERROR_JTAG_INIT_FAILED;
170 /* Get the current KitProg version and target voltage */
171 if (kitprog_get_info() != ERROR_OK)
174 /* Compatibility check */
175 kitprog_handle->supports_jtag_to_swd = true;
176 int kitprog_version = mm_to_version(kitprog_handle->major_version, kitprog_handle->minor_version);
177 if (kitprog_version < mm_to_version(2, 14)) {
178 LOG_WARNING("KitProg firmware versions below v2.14 do not support sending JTAG to SWD sequences. These sequences will be substituted with SWD line resets.");
179 kitprog_handle->supports_jtag_to_swd = false;
182 /* I have no idea what this does */
183 if (kitprog_set_unknown() != ERROR_OK)
186 /* SWD won't work unless we do this */
187 if (kitprog_swd_sync() != ERROR_OK)
190 /* Set the protocol to SWD */
191 if (kitprog_set_protocol(PROTOCOL_SWD) != ERROR_OK)
194 /* Reset the SWD bus */
195 if (kitprog_swd_seq(SEQUENCE_LINE_RESET) != ERROR_OK)
198 if (kitprog_init_acquire_psoc) {
199 /* Try to acquire any device that will respond */
200 retval = kitprog_generic_acquire();
201 if (retval != ERROR_OK) {
202 LOG_ERROR("No PSoC devices found");
207 /* Allocate packet buffers and queues */
208 kitprog_handle->packet_size = SWD_MAX_BUFFER_LENGTH;
209 kitprog_handle->packet_buffer = malloc(SWD_MAX_BUFFER_LENGTH);
210 if (!kitprog_handle->packet_buffer) {
211 LOG_ERROR("Failed to allocate memory for the packet buffer");
215 pending_queue_len = SWD_MAX_BUFFER_LENGTH / 5;
216 pending_transfers = malloc(pending_queue_len * sizeof(*pending_transfers));
217 if (!pending_transfers) {
218 LOG_ERROR("Failed to allocate memory for the SWD transfer queue");
225 static int kitprog_quit(void)
229 free(kitprog_handle->packet_buffer);
230 free(kitprog_handle->serial);
231 free(kitprog_handle);
232 free(pending_transfers);
237 /*************** kitprog usb functions *********************/
239 static int kitprog_get_usb_serial(void)
242 const uint8_t str_index = 128; /* This seems to be a constant */
243 char desc_string[256+1]; /* Max size of string descriptor */
245 retval = libusb_get_string_descriptor_ascii(kitprog_handle->usb_handle,
246 str_index, (unsigned char *)desc_string, sizeof(desc_string)-1);
248 LOG_ERROR("libusb_get_string_descriptor_ascii() failed with %d", retval);
252 /* Null terminate descriptor string */
253 desc_string[retval] = '\0';
255 /* Allocate memory for the serial number */
256 kitprog_handle->serial = calloc(retval + 1, sizeof(char));
257 if (!kitprog_handle->serial) {
258 LOG_ERROR("Failed to allocate memory for the serial number");
262 /* Store the serial number */
263 strncpy(kitprog_handle->serial, desc_string, retval + 1);
268 static int kitprog_usb_open(void)
270 const uint16_t vids[] = { VID, 0 };
271 const uint16_t pids[] = { PID, 0 };
273 if (jtag_libusb_open(vids, pids, &kitprog_handle->usb_handle, NULL) != ERROR_OK) {
274 LOG_ERROR("Failed to open or find the device");
278 /* Get the serial number for the device */
279 if (kitprog_get_usb_serial() != ERROR_OK)
280 LOG_WARNING("Failed to get KitProg serial number");
282 /* Convert the ASCII serial number into a (wchar_t *) */
283 size_t len = strlen(kitprog_handle->serial);
284 wchar_t *hid_serial = calloc(len + 1, sizeof(wchar_t));
286 LOG_ERROR("Failed to allocate memory for the serial number");
289 if (mbstowcs(hid_serial, kitprog_handle->serial, len + 1) == (size_t)-1) {
291 LOG_ERROR("Failed to convert serial number");
295 /* Use HID for the KitBridge interface */
296 kitprog_handle->hid_handle = hid_open(VID, PID, hid_serial);
298 if (!kitprog_handle->hid_handle) {
299 LOG_ERROR("Failed to open KitBridge (HID) interface");
303 /* Claim the KitProg Programmer (bulk transfer) interface */
304 if (libusb_claim_interface(kitprog_handle->usb_handle, 1) != ERROR_OK) {
305 LOG_ERROR("Failed to claim KitProg Programmer (bulk transfer) interface");
312 static void kitprog_usb_close(void)
314 if (kitprog_handle->hid_handle) {
315 hid_close(kitprog_handle->hid_handle);
319 jtag_libusb_close(kitprog_handle->usb_handle);
322 /*************** kitprog lowlevel functions *********************/
324 static int kitprog_hid_command(uint8_t *command, size_t command_length,
325 uint8_t *data, size_t data_length)
329 ret = hid_write(kitprog_handle->hid_handle, command, command_length);
331 LOG_DEBUG("HID write returned %i", ret);
335 ret = hid_read(kitprog_handle->hid_handle, data, data_length);
337 LOG_DEBUG("HID read returned %i", ret);
344 static int kitprog_get_version(void)
348 unsigned char command[3] = {HID_TYPE_START | HID_TYPE_WRITE, 0x00, HID_COMMAND_VERSION};
349 unsigned char data[64];
351 ret = kitprog_hid_command(command, sizeof(command), data, sizeof(data));
355 kitprog_handle->hardware_version = data[1];
356 kitprog_handle->minor_version = data[2];
357 kitprog_handle->major_version = data[3];
362 static int kitprog_get_millivolts(void)
366 unsigned char command[3] = {HID_TYPE_START | HID_TYPE_READ, 0x00, HID_COMMAND_POWER};
367 unsigned char data[64];
369 ret = kitprog_hid_command(command, sizeof(command), data, sizeof(data));
373 kitprog_handle->millivolts = (data[4] << 8) | data[3];
378 static int kitprog_get_info(void)
380 /* Get the device version information */
381 if (kitprog_get_version() == ERROR_OK) {
382 LOG_INFO("KitProg v%u.%02u",
383 kitprog_handle->major_version, kitprog_handle->minor_version);
384 LOG_INFO("Hardware version: %u",
385 kitprog_handle->hardware_version);
387 LOG_ERROR("Failed to get KitProg version");
391 /* Get the current reported target voltage */
392 if (kitprog_get_millivolts() == ERROR_OK) {
393 LOG_INFO("VTARG = %u.%03u V",
394 kitprog_handle->millivolts / 1000, kitprog_handle->millivolts % 1000);
396 LOG_ERROR("Failed to get target voltage");
403 static int kitprog_set_protocol(uint8_t protocol)
406 char status = PROGRAMMER_NOK_NACK;
408 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
409 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
411 (CONTROL_MODE_SET_PROGRAMMER_PROTOCOL << 8) | CONTROL_COMMAND_PROGRAM,
412 protocol, &status, 1, 0);
414 if (transferred == 0) {
415 LOG_DEBUG("Zero bytes transferred");
419 if (status != PROGRAMMER_OK_ACK) {
420 LOG_DEBUG("Programmer did not respond OK");
427 static int kitprog_get_status(void)
430 char status = PROGRAMMER_NOK_NACK;
432 /* Try a maximum of three times */
433 for (int i = 0; (i < 3) && (transferred == 0); i++) {
434 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
435 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
437 (CONTROL_MODE_POLL_PROGRAMMER_STATUS << 8) | CONTROL_COMMAND_PROGRAM,
442 if (transferred == 0) {
443 LOG_DEBUG("Zero bytes transferred");
447 if (status != PROGRAMMER_OK_ACK) {
448 LOG_DEBUG("Programmer did not respond OK");
455 static int kitprog_set_unknown(void)
458 char status = PROGRAMMER_NOK_NACK;
460 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
461 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
466 if (transferred == 0) {
467 LOG_DEBUG("Zero bytes transferred");
471 if (status != PROGRAMMER_OK_ACK) {
472 LOG_DEBUG("Programmer did not respond OK");
479 static int kitprog_acquire_psoc(uint8_t psoc_type, uint8_t acquire_mode,
480 uint8_t max_attempts)
483 char status = PROGRAMMER_NOK_NACK;
485 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
486 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
488 (CONTROL_MODE_ACQUIRE_SWD_TARGET << 8) | CONTROL_COMMAND_PROGRAM,
489 (max_attempts << 8) | (acquire_mode << 4) | psoc_type, &status, 1, 0);
491 if (transferred == 0) {
492 LOG_DEBUG("Zero bytes transferred");
496 if (status != PROGRAMMER_OK_ACK) {
497 LOG_DEBUG("Programmer did not respond OK");
504 static int kitprog_reset_target(void)
507 char status = PROGRAMMER_NOK_NACK;
509 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
510 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
512 (CONTROL_MODE_RESET_TARGET << 8) | CONTROL_COMMAND_PROGRAM,
515 if (transferred == 0) {
516 LOG_DEBUG("Zero bytes transferred");
520 if (status != PROGRAMMER_OK_ACK) {
521 LOG_DEBUG("Programmer did not respond OK");
528 static int kitprog_swd_sync(void)
531 char status = PROGRAMMER_NOK_NACK;
533 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
534 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
536 (CONTROL_MODE_SYNCHRONIZE_TRANSFER << 8) | CONTROL_COMMAND_PROGRAM,
539 if (transferred == 0) {
540 LOG_DEBUG("Zero bytes transferred");
544 if (status != PROGRAMMER_OK_ACK) {
545 LOG_DEBUG("Programmer did not respond OK");
552 static int kitprog_swd_seq(uint8_t seq_type)
555 char status = PROGRAMMER_NOK_NACK;
557 transferred = jtag_libusb_control_transfer(kitprog_handle->usb_handle,
558 LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
560 (CONTROL_MODE_SEND_SWD_SEQUENCE << 8) | CONTROL_COMMAND_PROGRAM,
561 seq_type, &status, 1, 0);
563 if (transferred == 0) {
564 LOG_DEBUG("Zero bytes transferred");
568 if (status != PROGRAMMER_OK_ACK) {
569 LOG_DEBUG("Programmer did not respond OK");
576 static int kitprog_generic_acquire(void)
578 const uint8_t devices[] = {DEVICE_PSOC4, DEVICE_PSOC3, DEVICE_PSOC5};
581 int acquire_count = 0;
583 /* Due to the way the SWD port is shared between the Test Controller (TC)
584 * and the Cortex-M3 DAP on the PSoC 5LP, the TC is the default SWD target
585 * after power is applied. To access the DAP, the PSoC 5LP requires at least
586 * one acquisition sequence to be run (which switches the SWD mux from the
587 * TC to the DAP). However, after the mux is switched, the Cortex-M3 will be
588 * held in reset until a series of registers are written to (see section 5.2
589 * of the PSoC 5LP Device Programming Specifications for details).
591 * Instead of writing the registers in this function, we just do what the
592 * Cypress tools do and run the acquisition sequence a second time. This
593 * will take the Cortex-M3 out of reset and enable debugging.
595 for (int i = 0; i < 2; i++) {
596 for (uint8_t j = 0; j < sizeof(devices) && acquire_count == i; j++) {
597 retval = kitprog_acquire_psoc(devices[j], ACQUIRE_MODE_RESET, 3);
598 if (retval != ERROR_OK) {
599 LOG_DEBUG("Acquisition function failed for device 0x%02x.", devices[j]);
603 if (kitprog_get_status() == ERROR_OK)
610 if (acquire_count < 2)
616 /*************** swd wrapper functions *********************/
618 static int kitprog_swd_init(void)
623 static void kitprog_swd_write_reg(uint8_t cmd, uint32_t value, uint32_t ap_delay_clk)
625 assert(!(cmd & SWD_CMD_RNW));
626 kitprog_swd_queue_cmd(cmd, NULL, value);
629 static void kitprog_swd_read_reg(uint8_t cmd, uint32_t *value, uint32_t ap_delay_clk)
631 assert(cmd & SWD_CMD_RNW);
632 kitprog_swd_queue_cmd(cmd, value, 0);
635 /*************** swd lowlevel functions ********************/
637 static int kitprog_swd_switch_seq(enum swd_special_seq seq)
641 if (kitprog_handle->supports_jtag_to_swd) {
642 LOG_DEBUG("JTAG to SWD");
643 if (kitprog_swd_seq(SEQUENCE_JTAG_TO_SWD) != ERROR_OK)
647 LOG_DEBUG("JTAG to SWD not supported");
648 /* Fall through to fix target reset issue */
652 LOG_DEBUG("SWD line reset");
653 if (kitprog_swd_seq(SEQUENCE_LINE_RESET) != ERROR_OK)
657 LOG_ERROR("Sequence %d not supported.", seq);
664 static int kitprog_swd_run_queue(void)
668 size_t read_count = 0;
669 size_t read_index = 0;
670 size_t write_count = 0;
671 uint8_t *buffer = kitprog_handle->packet_buffer;
674 LOG_DEBUG_IO("Executing %d queued transactions", pending_transfer_count);
676 if (queued_retval != ERROR_OK) {
677 LOG_DEBUG("Skipping due to previous errors: %d", queued_retval);
681 if (!pending_transfer_count)
684 for (int i = 0; i < pending_transfer_count; i++) {
685 uint8_t cmd = pending_transfers[i].cmd;
686 uint32_t data = pending_transfers[i].data;
688 /* When proper WAIT handling is implemented in the
689 * common SWD framework, this kludge can be
690 * removed. However, this might lead to minor
691 * performance degradation as the adapter wouldn't be
692 * able to automatically retry anything (because ARM
693 * has forgotten to implement sticky error flags
694 * clearing). See also comments regarding
695 * cmsis_dap_cmd_DAP_TFER_Configure() and
696 * cmsis_dap_cmd_DAP_SWD_Configure() in
699 if (!(cmd & SWD_CMD_RNW) &&
700 !(cmd & SWD_CMD_APNDP) &&
701 (cmd & SWD_CMD_A32) >> 1 == DP_CTRL_STAT &&
702 (data & CORUNDETECT)) {
703 LOG_DEBUG("refusing to enable sticky overrun detection");
704 data &= ~CORUNDETECT;
707 LOG_DEBUG_IO("%s %s reg %x %"PRIx32,
708 cmd & SWD_CMD_APNDP ? "AP" : "DP",
709 cmd & SWD_CMD_RNW ? "read" : "write",
710 (cmd & SWD_CMD_A32) >> 1, data);
712 buffer[write_count++] = (cmd | SWD_CMD_START | SWD_CMD_PARK) & ~SWD_CMD_STOP;
714 if (!(cmd & SWD_CMD_RNW)) {
715 buffer[write_count++] = (data) & 0xff;
716 buffer[write_count++] = (data >> 8) & 0xff;
717 buffer[write_count++] = (data >> 16) & 0xff;
718 buffer[write_count++] = (data >> 24) & 0xff;
724 if (jtag_libusb_bulk_write(kitprog_handle->usb_handle,
725 BULK_EP_OUT, (char *)buffer,
726 write_count, 0, &ret)) {
727 LOG_ERROR("Bulk write failed");
728 queued_retval = ERROR_FAIL;
731 queued_retval = ERROR_OK;
734 /* KitProg firmware does not send a zero length packet
735 * after the bulk-in transmission of a length divisible by bulk packet
736 * size (64 bytes) as required by the USB specification.
737 * Therefore libusb would wait for continuation of transmission.
738 * Workaround: Limit bulk read size to expected number of bytes
739 * for problematic transfer sizes. Otherwise use the maximum buffer
740 * size here because the KitProg sometimes doesn't like bulk reads
741 * of fewer than 62 bytes. (?!?!)
743 size_t read_count_workaround = SWD_MAX_BUFFER_LENGTH;
744 if (read_count % 64 == 0)
745 read_count_workaround = read_count;
747 if (jtag_libusb_bulk_read(kitprog_handle->usb_handle,
748 BULK_EP_IN | LIBUSB_ENDPOINT_IN, (char *)buffer,
749 read_count_workaround, 1000, &ret)) {
750 LOG_ERROR("Bulk read failed");
751 queued_retval = ERROR_FAIL;
754 /* Handle garbage data by offsetting the initial read index */
755 if ((unsigned int)ret > read_count)
756 read_index = ret - read_count;
757 queued_retval = ERROR_OK;
760 for (int i = 0; i < pending_transfer_count; i++) {
761 if (pending_transfers[i].cmd & SWD_CMD_RNW) {
762 uint32_t data = le_to_h_u32(&buffer[read_index]);
764 LOG_DEBUG_IO("Read result: %"PRIx32, data);
766 if (pending_transfers[i].buffer)
767 *(uint32_t *)pending_transfers[i].buffer = data;
772 uint8_t ack = buffer[read_index] & 0x07;
773 if (ack != SWD_ACK_OK || (buffer[read_index] & 0x08)) {
774 LOG_DEBUG("SWD ack not OK: %d %s", i,
775 ack == SWD_ACK_WAIT ? "WAIT" : ack == SWD_ACK_FAULT ? "FAULT" : "JUNK");
776 queued_retval = ack == SWD_ACK_WAIT ? ERROR_WAIT : ERROR_FAIL;
783 pending_transfer_count = 0;
784 int retval = queued_retval;
785 queued_retval = ERROR_OK;
790 static void kitprog_swd_queue_cmd(uint8_t cmd, uint32_t *dst, uint32_t data)
792 if (pending_transfer_count == pending_queue_len) {
793 /* Not enough room in the queue. Run the queue. */
794 queued_retval = kitprog_swd_run_queue();
797 if (queued_retval != ERROR_OK)
800 pending_transfers[pending_transfer_count].data = data;
801 pending_transfers[pending_transfer_count].cmd = cmd;
802 if (cmd & SWD_CMD_RNW) {
803 /* Queue a read transaction */
804 pending_transfers[pending_transfer_count].buffer = dst;
806 pending_transfer_count++;
809 /*************** jtag lowlevel functions ********************/
811 static int kitprog_reset(int trst, int srst)
813 int retval = ERROR_OK;
816 LOG_ERROR("KitProg: Interface has no TRST");
821 retval = kitprog_reset_target();
822 /* Since the previous command also disables SWCLK output, we need to send an
823 * SWD bus reset command to re-enable it. For some reason, running
824 * kitprog_swd_seq() immediately after kitprog_reset_target() won't
825 * actually fix this. Instead, kitprog_swd_seq() will be run once OpenOCD
826 * tries to send a JTAG-to-SWD sequence, which should happen during
827 * swd_check_reconnect (see the JTAG_TO_SWD case in kitprog_swd_switch_seq).
831 if (retval != ERROR_OK)
832 LOG_ERROR("KitProg: Interface reset failed");
836 COMMAND_HANDLER(kitprog_handle_info_command)
838 int retval = kitprog_get_info();
844 COMMAND_HANDLER(kitprog_handle_acquire_psoc_command)
846 int retval = kitprog_generic_acquire();
851 COMMAND_HANDLER(kitprog_handle_init_acquire_psoc_command)
853 kitprog_init_acquire_psoc = true;
858 static const struct command_registration kitprog_subcommand_handlers[] = {
861 .handler = &kitprog_handle_info_command,
862 .mode = COMMAND_EXEC,
864 .help = "show KitProg info",
867 .name = "acquire_psoc",
868 .handler = &kitprog_handle_acquire_psoc_command,
869 .mode = COMMAND_EXEC,
871 .help = "try to acquire a PSoC",
873 COMMAND_REGISTRATION_DONE
876 static const struct command_registration kitprog_command_handlers[] = {
880 .help = "perform KitProg management",
882 .chain = kitprog_subcommand_handlers,
885 .name = "kitprog_init_acquire_psoc",
886 .handler = &kitprog_handle_init_acquire_psoc_command,
887 .mode = COMMAND_CONFIG,
888 .help = "try to acquire a PSoC during init",
891 COMMAND_REGISTRATION_DONE
894 static const struct swd_driver kitprog_swd = {
895 .init = kitprog_swd_init,
896 .switch_seq = kitprog_swd_switch_seq,
897 .read_reg = kitprog_swd_read_reg,
898 .write_reg = kitprog_swd_write_reg,
899 .run = kitprog_swd_run_queue,
902 static const char * const kitprog_transports[] = { "swd", NULL };
904 struct adapter_driver kitprog_adapter_driver = {
906 .transports = kitprog_transports,
907 .commands = kitprog_command_handlers,
909 .init = kitprog_init,
910 .quit = kitprog_quit,
911 .reset = kitprog_reset,
913 .swd_ops = &kitprog_swd,