git.gag.com Git - fw/openocd/blob - src/jtag/drivers/buspirate.c

   1 /***************************************************************************
   2  *   Copyright (C) 2010 by Michal Demin                                    *
   3  *   based on usbprog.c and arm-jtag-ew.c                                  *
   4  *                                                                         *
   5  *   This program is free software; you can redistribute it and/or modify  *
   6  *   it under the terms of the GNU General Public License as published by  *
   7  *   the Free Software Foundation; either version 2 of the License, or     *
   8  *   (at your option) any later version.                                   *
   9  *                                                                         *
  10  *   This program is distributed in the hope that it will be useful,       *
  11  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  12  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  13  *   GNU General Public License for more details.                          *
  14  *                                                                         *
  15  *   You should have received a copy of the GNU General Public License     *
  16  *   along with this program; if not, write to the                         *
  17  *   Free Software Foundation, Inc.,                                       *
  18  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  19  ***************************************************************************/
  20
  21 #ifdef HAVE_CONFIG_H
  22 #include "config.h"
  23 #endif
  24
  25 #include <jtag/interface.h>
  26 #include <jtag/commands.h>
  27
  28 #include <termios.h>
  29 #include <fcntl.h>
  30 #include <sys/ioctl.h>
  31
  32 #undef DEBUG_SERIAL
  33 /*#define DEBUG_SERIAL */
  34 static int buspirate_execute_queue(void);
  35 static int buspirate_speed(int speed);
  36 static int buspirate_khz(int khz, int *jtag_speed);
  37 static int buspirate_init(void);
  38 static int buspirate_quit(void);
  39
  40 static void buspirate_end_state(tap_state_t state);
  41 static void buspirate_state_move(void);
  42 static void buspirate_path_move(int num_states, tap_state_t *path);
  43 static void buspirate_runtest(int num_cycles);
  44 static void buspirate_scan(bool ir_scan, enum scan_type type,
  45         uint8_t *buffer, int scan_size, struct scan_command *command);
  46
  47
  48 #define CMD_UNKOWN        0x00
  49 #define CMD_PORT_MODE     0x01
  50 #define CMD_FEATURE       0x02
  51 #define CMD_READ_ADCS     0x03
  52 /*#define CMD_TAP_SHIFT     0x04 // old protocol */
  53 #define CMD_TAP_SHIFT     0x05
  54 #define CMD_ENTER_OOCD    0x06
  55 #define CMD_UART_SPEED    0x07
  56 #define CMD_JTAG_SPEED    0x08
  57
  58 enum {
  59         MODE_HIZ = 0,
  60         MODE_JTAG = 1,          /* push-pull outputs */
  61         MODE_JTAG_OD = 2,       /* open-drain outputs */
  62 };
  63
  64 enum {
  65         FEATURE_LED = 0x01,
  66         FEATURE_VREG = 0x02,
  67         FEATURE_TRST = 0x04,
  68         FEATURE_SRST = 0x08,
  69         FEATURE_PULLUP = 0x10
  70 };
  71
  72 enum {
  73         ACTION_DISABLE = 0,
  74         ACTION_ENABLE = 1
  75 };
  76
  77 enum {
  78         SERIAL_NORMAL = 0,
  79         SERIAL_FAST = 1
  80 };
  81
  82
  83 static int buspirate_fd = -1;
  84 static int buspirate_pinmode = MODE_JTAG_OD;
  85 static int buspirate_baudrate = SERIAL_NORMAL;
  86 static int buspirate_vreg;
  87 static int buspirate_pullup;
  88 static char *buspirate_port;
  89
  90
  91 /* TAP interface */
  92 static void buspirate_tap_init(void);
  93 static int buspirate_tap_execute(void);
  94 static void buspirate_tap_append(int tms, int tdi);
  95 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
  96                 struct scan_command *command);
  97 static void buspirate_tap_make_space(int scan, int bits);
  98
  99 static void buspirate_reset(int trst, int srst);
 100
 101 /* low level interface */
 102 static void buspirate_jtag_reset(int);
 103 static void buspirate_jtag_enable(int);
 104 static unsigned char buspirate_jtag_command(int, char *, int);
 105 static void buspirate_jtag_set_speed(int, char);
 106 static void buspirate_jtag_set_mode(int, char);
 107 static void buspirate_jtag_set_feature(int, char, char);
 108 static void buspirate_jtag_get_adcs(int);
 109
 110 /* low level HW communication interface */
 111 static int buspirate_serial_setspeed(int fd, speed_t speed);
 112 static int buspirate_serial_write(int fd, char *buf, int size);
 113 static int buspirate_serial_read(int fd, char *buf, int size);
 114 static void buspirate_print_buffer(char *buf, int size);
 115
 116 static int buspirate_speed(int speed)
 117 {
 118         /* TODO */
 119         LOG_INFO("Want to set speed to %dkHz, but not implemented yet", speed);
 120         return ERROR_OK;
 121 }
 122
 123 static int buspirate_khz(int khz, int *jtag_speed)
 124 {
 125         *jtag_speed = khz;
 126         return ERROR_OK;
 127 }
 128
 129 static int buspirate_execute_queue(void)
 130 {
 131         /* currently processed command */
 132         struct jtag_command *cmd = jtag_command_queue;
 133         int scan_size;
 134         enum scan_type type;
 135         uint8_t *buffer;
 136
 137         while (cmd) {
 138                 switch (cmd->type) {
 139                 case JTAG_RUNTEST:
 140                         DEBUG_JTAG_IO("runtest %i cycles, end in %s",
 141                                 cmd->cmd.runtest->num_cycles,
 142                                 tap_state_name(cmd->cmd.runtest
 143                                         ->end_state));
 144                         buspirate_end_state(cmd->cmd.runtest
 145                                         ->end_state);
 146                         buspirate_runtest(cmd->cmd.runtest
 147                                         ->num_cycles);
 148                         break;
 149                 case JTAG_TLR_RESET:
 150                         DEBUG_JTAG_IO("statemove end in %s",
 151                                 tap_state_name(cmd->cmd.statemove
 152                                                 ->end_state));
 153                         buspirate_end_state(cmd->cmd.statemove
 154                                         ->end_state);
 155                         buspirate_state_move();
 156                         break;
 157                 case JTAG_PATHMOVE:
 158                         DEBUG_JTAG_IO("pathmove: %i states, end in %s",
 159                                 cmd->cmd.pathmove->num_states,
 160                                 tap_state_name(cmd->cmd.pathmove
 161                                         ->path[cmd->cmd.pathmove
 162                                                 ->num_states - 1]));
 163                         buspirate_path_move(cmd->cmd.pathmove
 164                                         ->num_states,
 165                                         cmd->cmd.pathmove->path);
 166                         break;
 167                 case JTAG_SCAN:
 168                         DEBUG_JTAG_IO("scan end in %s",
 169                                 tap_state_name(cmd->cmd.scan
 170                                         ->end_state));
 171
 172                         buspirate_end_state(cmd->cmd.scan
 173                                         ->end_state);
 174
 175                         scan_size = jtag_build_buffer(cmd->cmd.scan,
 176                                         &buffer);
 177                         type = jtag_scan_type(cmd->cmd.scan);
 178                         buspirate_scan(cmd->cmd.scan->ir_scan, type,
 179                                 buffer, scan_size, cmd->cmd.scan);
 180
 181                         break;
 182                 case JTAG_RESET:
 183                         DEBUG_JTAG_IO("reset trst: %i srst %i",
 184                                 cmd->cmd.reset->trst, cmd->cmd.reset->srst);
 185
 186                         /* flush buffers, so we can reset */
 187                         buspirate_tap_execute();
 188
 189                         if (cmd->cmd.reset->trst == 1)
 190                                 tap_set_state(TAP_RESET);
 191                         buspirate_reset(cmd->cmd.reset->trst,
 192                                         cmd->cmd.reset->srst);
 193                         break;
 194                 case JTAG_SLEEP:
 195                         DEBUG_JTAG_IO("sleep %i", cmd->cmd.sleep->us);
 196                         buspirate_tap_execute();
 197                         jtag_sleep(cmd->cmd.sleep->us);
 198                                 break;
 199                 default:
 200                         LOG_ERROR("BUG: unknown JTAG command type encountered");
 201                         exit(-1);
 202                 }
 203
 204                 cmd = cmd->next;
 205         }
 206
 207         return buspirate_tap_execute();
 208 }
 209
 210 static int buspirate_init(void)
 211 {
 212         if (buspirate_port == NULL) {
 213                 LOG_ERROR("You need to specify port !");
 214                 return ERROR_JTAG_INIT_FAILED;
 215         }
 216
 217         buspirate_fd = open(buspirate_port, O_RDWR | O_NOCTTY);
 218         if (buspirate_fd == -1) {
 219                 LOG_ERROR("Could not open serial port.");
 220                 return ERROR_JTAG_INIT_FAILED;
 221         }
 222
 223         buspirate_serial_setspeed(buspirate_fd, B115200);
 224
 225         buspirate_jtag_enable(buspirate_fd);
 226
 227         if (buspirate_baudrate != SERIAL_NORMAL)
 228                 buspirate_jtag_set_speed(buspirate_fd, SERIAL_FAST);
 229
 230         LOG_INFO("Buspirate Interface ready!");
 231
 232         buspirate_tap_init();
 233         buspirate_jtag_set_mode(buspirate_fd, buspirate_pinmode);
 234         buspirate_jtag_set_feature(buspirate_fd, FEATURE_VREG,
 235                 (buspirate_vreg == 1) ? ACTION_ENABLE : ACTION_DISABLE);
 236         buspirate_jtag_set_feature(buspirate_fd, FEATURE_PULLUP,
 237                 (buspirate_pullup == 1) ? ACTION_ENABLE : ACTION_DISABLE);
 238         buspirate_reset(0, 0);
 239
 240         return ERROR_OK;
 241 }
 242
 243 static int buspirate_quit(void)
 244 {
 245         LOG_INFO("Shuting down buspirate ");
 246         buspirate_jtag_set_mode(buspirate_fd, MODE_HIZ);
 247
 248         buspirate_jtag_set_speed(buspirate_fd, SERIAL_NORMAL);
 249         buspirate_jtag_reset(buspirate_fd);
 250         if (buspirate_port) {
 251                 free(buspirate_port);
 252                 buspirate_port = NULL;
 253         }
 254         return ERROR_OK;
 255 }
 256
 257 /* openocd command interface */
 258 COMMAND_HANDLER(buspirate_handle_adc_command)
 259 {
 260         if (CMD_ARGC != 0) {
 261                 LOG_ERROR("usage: buspirate_adc");
 262                 return ERROR_OK;
 263         }
 264
 265         if (buspirate_fd == -1)
 266                 return ERROR_OK;
 267
 268         /* send the command */
 269         buspirate_jtag_get_adcs(buspirate_fd);
 270
 271         return ERROR_OK;
 272
 273 }
 274
 275 COMMAND_HANDLER(buspirate_handle_vreg_command)
 276 {
 277         if (CMD_ARGC != 1) {
 278                 LOG_ERROR("usage: buspirate_vreg <1|0>");
 279                 return ERROR_OK;
 280         }
 281
 282         if (atoi(CMD_ARGV[0]) == 1)
 283                 buspirate_vreg = 1;
 284         else
 285                 buspirate_vreg = 0;
 286
 287         return ERROR_OK;
 288
 289 }
 290
 291 COMMAND_HANDLER(buspirate_handle_pullup_command)
 292 {
 293         if (CMD_ARGC != 1) {
 294                 LOG_ERROR("usage: buspirate_pullup <1|0>");
 295                 return ERROR_OK;
 296         }
 297
 298         if (atoi(CMD_ARGV[0]) == 1)
 299                 buspirate_pullup = 1;
 300         else
 301                 buspirate_pullup = 0;
 302
 303         return ERROR_OK;
 304
 305 }
 306
 307 COMMAND_HANDLER(buspirate_handle_led_command)
 308 {
 309         if (CMD_ARGC != 1) {
 310                 LOG_ERROR("usage: buspirate_led <1|0>");
 311                 return ERROR_OK;
 312         }
 313
 314         if (atoi(CMD_ARGV[0]) == 1) {
 315                 /* enable led */
 316                 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
 317                                 ACTION_ENABLE);
 318         } else {
 319                 /* disable led */
 320                 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
 321                                 ACTION_DISABLE);
 322         }
 323
 324         return ERROR_OK;
 325
 326 }
 327
 328 COMMAND_HANDLER(buspirate_handle_mode_command)
 329 {
 330         if (CMD_ARGC != 1) {
 331                 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
 332                 return ERROR_OK;
 333         }
 334
 335         if (CMD_ARGV[0][0] == 'n')
 336                 buspirate_pinmode = MODE_JTAG;
 337         else if (CMD_ARGV[0][0] == 'o')
 338                 buspirate_pinmode = MODE_JTAG_OD;
 339         else
 340                 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
 341
 342         return ERROR_OK;
 343
 344 }
 345
 346 COMMAND_HANDLER(buspirate_handle_speed_command)
 347 {
 348         if (CMD_ARGC != 1) {
 349                 LOG_ERROR("usage: buspirate_speed <normal|fast>");
 350                 return ERROR_OK;
 351         }
 352
 353         if (CMD_ARGV[0][0] == 'n')
 354                 buspirate_baudrate = SERIAL_NORMAL;
 355         else if (CMD_ARGV[0][0] == 'f')
 356                 buspirate_baudrate = SERIAL_FAST;
 357         else
 358                 LOG_ERROR("usage: buspirate_speed <normal|fast>");
 359
 360         return ERROR_OK;
 361
 362 }
 363
 364 COMMAND_HANDLER(buspirate_handle_port_command)
 365 {
 366         if (CMD_ARGC != 1) {
 367                 LOG_ERROR("usage: buspirate_port /dev/ttyUSB0");
 368                 return ERROR_OK;
 369         }
 370
 371         if (buspirate_port == 0)
 372                 buspirate_port = strdup(CMD_ARGV[0]);
 373
 374         return ERROR_OK;
 375
 376 }
 377
 378 static const struct command_registration buspirate_command_handlers[] = {
 379         {
 380                 .name = "buspirate_adc",
 381                 .handler = &buspirate_handle_adc_command,
 382                 .mode = COMMAND_EXEC,
 383                 .help = "reads voltages on adc pins",
 384         },
 385         {
 386                 .name = "buspirate_vreg",
 387                 .handler = &buspirate_handle_vreg_command,
 388                 .mode = COMMAND_CONFIG,
 389                 .help = "changes the state of voltage regulators",
 390         },
 391         {
 392                 .name = "buspirate_pullup",
 393                 .handler = &buspirate_handle_pullup_command,
 394                 .mode = COMMAND_CONFIG,
 395                 .help = "changes the state of pullup",
 396         },
 397         {
 398                 .name = "buspirate_led",
 399                 .handler = &buspirate_handle_led_command,
 400                 .mode = COMMAND_EXEC,
 401                 .help = "changes the state of led",
 402         },
 403         {
 404                 .name = "buspirate_speed",
 405                 .handler = &buspirate_handle_speed_command,
 406                 .mode = COMMAND_CONFIG,
 407                 .help = "speed of the interface",
 408         },
 409         {
 410                 .name = "buspirate_mode",
 411                 .handler = &buspirate_handle_mode_command,
 412                 .mode = COMMAND_CONFIG,
 413                 .help = "pin mode of the interface",
 414         },
 415         {
 416                 .name = "buspirate_port",
 417                 .handler = &buspirate_handle_port_command,
 418                 .mode = COMMAND_CONFIG,
 419                 .help = "name of the serial port to open",
 420         },
 421         COMMAND_REGISTRATION_DONE
 422 };
 423
 424 struct jtag_interface buspirate_interface = {
 425         .name = "buspirate",
 426         .execute_queue = buspirate_execute_queue,
 427         .speed = buspirate_speed,
 428         .khz = buspirate_khz,
 429         .commands = buspirate_command_handlers,
 430         .init = buspirate_init,
 431         .quit = buspirate_quit
 432 };
 433
 434 /*************** jtag execute commands **********************/
 435 static void buspirate_end_state(tap_state_t state)
 436 {
 437         if (tap_is_state_stable(state))
 438                 tap_set_end_state(state);
 439         else {
 440                 LOG_ERROR("BUG: %i is not a valid end state", state);
 441                 exit(-1);
 442         }
 443 }
 444
 445 static void buspirate_state_move(void)
 446 {
 447         int i = 0, tms = 0;
 448         uint8_t tms_scan = tap_get_tms_path(tap_get_state(),
 449                         tap_get_end_state());
 450         int tms_count = tap_get_tms_path_len(tap_get_state(),
 451                         tap_get_end_state());
 452
 453         for (i = 0; i < tms_count; i++) {
 454                 tms = (tms_scan >> i) & 1;
 455                 buspirate_tap_append(tms, 0);
 456         }
 457
 458         tap_set_state(tap_get_end_state());
 459 }
 460
 461 static void buspirate_path_move(int num_states, tap_state_t *path)
 462 {
 463         int i;
 464
 465         for (i = 0; i < num_states; i++) {
 466                 if (tap_state_transition(tap_get_state(), false) == path[i]) {
 467                         buspirate_tap_append(0, 0);
 468                 } else if (tap_state_transition(tap_get_state(), true)
 469                                 == path[i]) {
 470                         buspirate_tap_append(1, 0);
 471                 } else {
 472                         LOG_ERROR("BUG: %s -> %s isn't a valid "
 473                                 "TAP transition",
 474                                 tap_state_name(tap_get_state()),
 475                                 tap_state_name(path[i]));
 476                         exit(-1);
 477                 }
 478
 479                 tap_set_state(path[i]);
 480         }
 481
 482         tap_set_end_state(tap_get_state());
 483 }
 484
 485 static void buspirate_runtest(int num_cycles)
 486 {
 487         int i;
 488
 489         tap_state_t saved_end_state = tap_get_end_state();
 490
 491         /* only do a state_move when we're not already in IDLE */
 492         if (tap_get_state() != TAP_IDLE) {
 493                 buspirate_end_state(TAP_IDLE);
 494                 buspirate_state_move();
 495         }
 496
 497         for (i = 0; i < num_cycles; i++)
 498                 buspirate_tap_append(0, 0);
 499
 500         DEBUG_JTAG_IO("runtest: cur_state %s end_state %s",
 501                         tap_state_name(tap_get_state()),
 502                         tap_state_name(tap_get_end_state()));
 503
 504         /* finish in end_state */
 505         buspirate_end_state(saved_end_state);
 506         if (tap_get_state() != tap_get_end_state())
 507                 buspirate_state_move();
 508 }
 509
 510 static void buspirate_scan(bool ir_scan, enum scan_type type,
 511         uint8_t *buffer, int scan_size, struct scan_command *command)
 512 {
 513         tap_state_t saved_end_state;
 514
 515         buspirate_tap_make_space(1, scan_size+8);
 516         /* is 8 correct ? (2 moves = 16) */
 517
 518         saved_end_state = tap_get_end_state();
 519
 520         buspirate_end_state(ir_scan ? TAP_IRSHIFT : TAP_DRSHIFT);
 521         buspirate_state_move();
 522
 523         buspirate_tap_append_scan(scan_size, buffer, command);
 524
 525         /* move to PAUSE */
 526         buspirate_tap_append(0, 0);
 527
 528         /* restore the saved state */
 529         buspirate_end_state(saved_end_state);
 530         tap_set_state(ir_scan ? TAP_IRPAUSE : TAP_DRPAUSE);
 531
 532         if (tap_get_state() != tap_get_end_state())
 533                 buspirate_state_move();
 534 }
 535
 536
 537 /************************* TAP related stuff **********/
 538
 539 #define BUSPIRATE_BUFFER_SIZE 1024
 540 #define BUSPIRATE_MAX_PENDING_SCANS 32
 541
 542 static char tms_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
 543 static char tdi_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
 544 static int tap_chain_index;
 545
 546 struct pending_scan_result /* this was stolen from arm-jtag-ew */
 547 {
 548         int first; /* First bit position in tdo_buffer to read */
 549         int length; /* Number of bits to read */
 550         struct scan_command *command; /* Corresponding scan command */
 551         uint8_t *buffer;
 552 };
 553
 554 static struct pending_scan_result
 555 tap_pending_scans[BUSPIRATE_MAX_PENDING_SCANS];
 556 static int tap_pending_scans_num;
 557
 558 static void buspirate_tap_init(void)
 559 {
 560         tap_chain_index = 0;
 561         tap_pending_scans_num = 0;
 562 }
 563
 564 static int buspirate_tap_execute(void)
 565 {
 566         char tmp[4096];
 567         uint8_t *in_buf;
 568         int i;
 569         int fill_index = 0;
 570         int ret;
 571         int bytes_to_send;
 572
 573         if (tap_chain_index <= 0)
 574                 return ERROR_OK;
 575
 576         LOG_DEBUG("executing tap num bits = %i scans = %i",
 577                         tap_chain_index, tap_pending_scans_num);
 578
 579         bytes_to_send = (tap_chain_index+7) / 8;
 580
 581         tmp[0] = CMD_TAP_SHIFT; /* this command expects number of bits */
 582         tmp[1] = (char)(tap_chain_index >> 8);  /* high */
 583         tmp[2] = (char)(tap_chain_index);  /* low */
 584
 585         fill_index = 3;
 586         for (i = 0; i < bytes_to_send; i++) {
 587                 tmp[fill_index] = tdi_chain[i];
 588                 fill_index++;
 589                 tmp[fill_index] = tms_chain[i];
 590                 fill_index++;
 591         }
 592
 593         ret = buspirate_serial_write(buspirate_fd, tmp, 3 + bytes_to_send*2);
 594         if (ret != bytes_to_send*2+3) {
 595                 LOG_ERROR("error writing :(");
 596                 return ERROR_JTAG_DEVICE_ERROR;
 597         }
 598
 599         ret = buspirate_serial_read(buspirate_fd, tmp, bytes_to_send + 3);
 600         in_buf = (uint8_t *)(&tmp[3]);
 601
 602         /* parse the scans */
 603         for (i = 0; i < tap_pending_scans_num; i++) {
 604                 uint8_t *buffer = tap_pending_scans[i].buffer;
 605                 int length = tap_pending_scans[i].length;
 606                 int first = tap_pending_scans[i].first;
 607                 struct scan_command *command = tap_pending_scans[i].command;
 608
 609                 /* copy bits from buffer */
 610                 buf_set_buf(in_buf, first, buffer, 0, length);
 611
 612                 /* return buffer to higher level */
 613                 if (jtag_read_buffer(buffer, command) != ERROR_OK) {
 614                         buspirate_tap_init();
 615                         return ERROR_JTAG_QUEUE_FAILED;
 616                 }
 617
 618                 free(buffer);
 619         }
 620         tap_pending_scans_num = 0;
 621         tap_chain_index = 0;
 622         return ERROR_OK;
 623 }
 624
 625 static void buspirate_tap_make_space(int scans, int bits)
 626 {
 627         int have_scans = BUSPIRATE_MAX_PENDING_SCANS - tap_pending_scans_num;
 628         int have_bits = BUSPIRATE_BUFFER_SIZE * 8 - tap_chain_index;
 629
 630         if ((have_scans < scans) || (have_bits < bits))
 631                 buspirate_tap_execute();
 632 }
 633
 634 static void buspirate_tap_append(int tms, int tdi)
 635 {
 636         int chain_index;
 637
 638         buspirate_tap_make_space(0, 1);
 639         chain_index = tap_chain_index / 8;
 640
 641         if (chain_index < BUSPIRATE_BUFFER_SIZE) {
 642                 int bit_index = tap_chain_index % 8;
 643                 uint8_t bit = 1 << bit_index;
 644
 645                 if (tms)
 646                         tms_chain[chain_index] |= bit;
 647                 else
 648                         tms_chain[chain_index] &= ~bit;
 649
 650                 if (tdi)
 651                         tdi_chain[chain_index] |= bit;
 652                 else
 653                         tdi_chain[chain_index] &= ~bit;
 654
 655                 tap_chain_index++;
 656         } else
 657                 LOG_ERROR("tap_chain overflow, Bad things will happen");
 658
 659 }
 660
 661 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
 662                 struct scan_command *command)
 663 {
 664         int i;
 665         tap_pending_scans[tap_pending_scans_num].length = length;
 666         tap_pending_scans[tap_pending_scans_num].buffer = buffer;
 667         tap_pending_scans[tap_pending_scans_num].command = command;
 668         tap_pending_scans[tap_pending_scans_num].first = tap_chain_index;
 669
 670         for (i = 0; i < length; i++) {
 671                 int tms = (i < length-1 ? 0 : 1);
 672                 int tdi = (buffer[i/8] >> (i%8)) & 1;
 673                 buspirate_tap_append(tms, tdi);
 674         }
 675         tap_pending_scans_num++;
 676 }
 677
 678 /*************** jtag wrapper functions *********************/
 679
 680 /* (1) assert or (0) deassert reset lines */
 681 static void buspirate_reset(int trst, int srst)
 682 {
 683         LOG_DEBUG("trst: %i, srst: %i", trst, srst);
 684
 685         if (trst)
 686                 buspirate_jtag_set_feature(buspirate_fd,
 687                                 FEATURE_TRST, ACTION_DISABLE);
 688         else
 689                 buspirate_jtag_set_feature(buspirate_fd,
 690                                 FEATURE_TRST, ACTION_ENABLE);
 691
 692         if (srst)
 693                 buspirate_jtag_set_feature(buspirate_fd,
 694                                 FEATURE_SRST, ACTION_DISABLE);
 695         else
 696                 buspirate_jtag_set_feature(buspirate_fd,
 697                                 FEATURE_SRST, ACTION_ENABLE);
 698 }
 699
 700 /*************** jtag lowlevel functions ********************/
 701 static void buspirate_jtag_enable(int fd)
 702 {
 703         int ret;
 704         char tmp[21] = { [0 ... 20] = 0x00 };
 705         int done = 0;
 706         int cmd_sent = 0;
 707
 708         LOG_DEBUG("Entering binary mode");
 709         buspirate_serial_write(fd, tmp, 20);
 710         usleep(10000);
 711
 712         /* reads 1 to n "BBIO1"s and one "OCD1" */
 713         while (!done) {
 714                 ret = buspirate_serial_read(fd, tmp, 4);
 715                 if (ret != 4) {
 716                         LOG_ERROR("Buspirate did not respond :"
 717                                 "( restart everything");
 718                         exit(-1);
 719                 }
 720                 LOG_DEBUG("TUI");
 721                 if (strncmp(tmp, "BBIO", 4) == 0) {
 722                         ret = buspirate_serial_read(fd, tmp, 1);
 723                         if (ret != 1) {
 724                                 LOG_ERROR("Buspirate did not respond well :"
 725                                         "( restart everything");
 726                                 exit(-1);
 727                         }
 728                         if (tmp[0] != '1') {
 729                                 LOG_ERROR("Unsupported binary protocol ");
 730                                 exit(-1);
 731                         }
 732                         if (cmd_sent == 0) {
 733                                 cmd_sent = 1;
 734                                 tmp[0] = CMD_ENTER_OOCD;
 735                                 ret = buspirate_serial_write(fd, tmp, 1);
 736                         }
 737                 } else if (strncmp(tmp, "OCD1", 4) == 0)
 738                         done = 1;
 739                 else {
 740                         LOG_ERROR("Buspirate did not respond :"
 741                                 "( restart everything");
 742                         exit(-1);
 743                 }
 744         }
 745
 746 }
 747
 748 static void buspirate_jtag_reset(int fd)
 749 {
 750         int ret;
 751         char tmp[5];
 752
 753         tmp[0] = 0x00; /* exit OCD1 mode */
 754         buspirate_serial_write(fd, tmp, 1);
 755         usleep(10000);
 756         ret = buspirate_serial_read(fd, tmp, 5);
 757         if (strncmp(tmp, "BBIO1", 5) == 0) {
 758                 tmp[0] = 0x0F; /*  reset BP */
 759                 buspirate_serial_write(fd, tmp, 1);
 760         } else
 761                 LOG_ERROR("Bad reply :( Please restart manually");
 762 }
 763
 764 static void buspirate_jtag_set_speed(int fd, char speed)
 765 {
 766         int ret;
 767         char tmp[2];
 768         char ack[2];
 769         speed_t baudrate = B115200;
 770
 771         ack[0] = 0xAA;
 772         ack[1] = 0x55;
 773
 774         tmp[0] = CMD_UART_SPEED;
 775         tmp[1] = speed;
 776         buspirate_jtag_command(fd, tmp, 2);
 777
 778         /* here the adapter changes speed, we need follow */
 779         if (speed == SERIAL_FAST)
 780                 baudrate = B1000000;
 781
 782         buspirate_serial_setspeed(fd, baudrate);
 783
 784         buspirate_serial_write(fd, ack, 2);
 785         ret = buspirate_serial_read(fd, tmp, 2);
 786         if (ret != 2) {
 787                 LOG_ERROR("Buspirate did not respond :"
 788                         "( restart everything");
 789                 exit(-1);
 790         }
 791         if ((tmp[0] != CMD_UART_SPEED) || (tmp[1] != speed)) {
 792                 LOG_ERROR("Buspirate didn't reply as expected :"
 793                         "( restart everything");
 794                 exit(-1);
 795         }
 796         LOG_INFO("Buspirate switched to %s mode",
 797                 (speed == SERIAL_NORMAL) ? "normal" : "FAST");
 798 }
 799
 800
 801 static void buspirate_jtag_set_mode(int fd, char mode)
 802 {
 803         char tmp[2];
 804         tmp[0] = CMD_PORT_MODE;
 805         tmp[1] = mode;
 806         buspirate_jtag_command(fd, tmp, 2);
 807 }
 808
 809 static void buspirate_jtag_set_feature(int fd, char feat, char action)
 810 {
 811         char tmp[3];
 812         tmp[0] = CMD_FEATURE;
 813         tmp[1] = feat;   /* what */
 814         tmp[2] = action; /* action */
 815         buspirate_jtag_command(fd, tmp, 3);
 816 }
 817
 818 static void buspirate_jtag_get_adcs(int fd)
 819 {
 820         uint8_t tmp[10];
 821         uint16_t a, b, c, d;
 822         tmp[0] = CMD_READ_ADCS;
 823         buspirate_jtag_command(fd, (char *)tmp, 1);
 824         a = tmp[2] << 8 | tmp[3];
 825         b = tmp[4] << 8 | tmp[5];
 826         c = tmp[6] << 8 | tmp[7];
 827         d = tmp[8] << 8 | tmp[9];
 828
 829         LOG_INFO("ADC: ADC_Pin = %.02f VPullup = %.02f V33 = %.02f "
 830                 "V50 = %.02f",
 831                 ((float)a)/155.1515, ((float)b)/155.1515,
 832                 ((float)c)/155.1515, ((float)d)/155.1515);
 833 }
 834
 835 static unsigned char buspirate_jtag_command(int fd,
 836                 char *cmd, int cmdlen)
 837 {
 838         int res;
 839         int len = 0;
 840
 841         res = buspirate_serial_write(fd, cmd, cmdlen);
 842
 843         if ((cmd[0] == CMD_UART_SPEED)
 844                                 || (cmd[0] == CMD_PORT_MODE)
 845                                 || (cmd[0] == CMD_FEATURE)
 846                                 || (cmd[0] == CMD_JTAG_SPEED))
 847                 return 1;
 848
 849         if (res == cmdlen) {
 850                 switch (cmd[0]) {
 851                 case CMD_READ_ADCS:
 852                         len = 10; /* 2*sizeof(char)+4*sizeof(uint16_t) */
 853                         break;
 854                 case CMD_TAP_SHIFT:
 855                         len = cmdlen;
 856                         break;
 857                 default:
 858                         LOG_INFO("Wrong !");
 859                 }
 860                 res =  buspirate_serial_read(fd, cmd, len);
 861                 if (res > 0)
 862                         return (unsigned char)cmd[1];
 863                 else
 864                         return -1;
 865         } else
 866                 return -1;
 867         return 0;
 868 }
 869
 870 /* low level serial port */
 871 /* TODO add support for WIN32 and others ! */
 872 static int buspirate_serial_setspeed(int fd, speed_t speed)
 873 {
 874         struct termios t_opt;
 875
 876         /* set the serial port parameters */
 877         fcntl(fd, F_SETFL, 0);
 878         tcgetattr(fd, &t_opt);
 879         cfsetispeed(&t_opt, speed);
 880         cfsetospeed(&t_opt, speed);
 881         t_opt.c_cflag |= (CLOCAL | CREAD);
 882         t_opt.c_cflag &= ~PARENB;
 883         t_opt.c_cflag &= ~CSTOPB;
 884         t_opt.c_cflag &= ~CSIZE;
 885         t_opt.c_cflag |= CS8;
 886         t_opt.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
 887         t_opt.c_iflag &= ~(IXON | IXOFF | IXANY);
 888         t_opt.c_oflag &= ~OPOST;
 889         t_opt.c_cc[VMIN] = 0;
 890         t_opt.c_cc[VTIME] = 10;
 891         tcflush(fd, TCIFLUSH);
 892         tcsetattr(fd, TCSANOW, &t_opt);
 893
 894         return 0;
 895 }
 896
 897 static int buspirate_serial_write(int fd, char *buf, int size)
 898 {
 899         int ret = 0;
 900
 901         ret = write(fd, buf, size);
 902
 903         LOG_DEBUG("size = %d ret = %d", size, ret);
 904         buspirate_print_buffer(buf, size);
 905
 906         if (ret != size)
 907                 LOG_ERROR("Error sending data");
 908
 909         return ret;
 910 }
 911
 912 static int buspirate_serial_read(int fd, char *buf, int size)
 913 {
 914         int len = 0;
 915         int ret = 0;
 916         int timeout = 0;
 917
 918         while (len < size) {
 919                 ret = read(fd, buf+len, size-len);
 920                 if (ret == -1)
 921                         return -1;
 922
 923                 if (ret == 0) {
 924                         timeout++;
 925
 926                         if (timeout >= 10)
 927                                 break;
 928
 929                         continue;
 930                 }
 931
 932                 len += ret;
 933         }
 934
 935         LOG_DEBUG("should have read = %d actual size = %d", size, len);
 936         buspirate_print_buffer(buf, len);
 937
 938         if (len != size)
 939                 LOG_ERROR("Error sending data");
 940
 941         return len;
 942 }
 943
 944 #define LINE_SIZE      81
 945 #define BYTES_PER_LINE 16
 946 static void buspirate_print_buffer(char *buf, int size)
 947 {
 948         char line[LINE_SIZE];
 949         char tmp[10];
 950         int offset = 0;
 951
 952         line[0] = 0;
 953         while (offset < size) {
 954                 snprintf(tmp, 5, "%02x ", (uint8_t)buf[offset]);
 955                 offset++;
 956
 957                 strcat(line, tmp);
 958
 959                 if (offset % BYTES_PER_LINE == 0) {
 960                         LOG_DEBUG("%s", line);
 961                         line[0] = 0;
 962                 }
 963         }
 964
 965         if (line[0] != 0) {
 966                 LOG_DEBUG("%s", line);
 967         }
 968 }
 969