1 /***************************************************************************
2 * Copyright (C) 2010 by Michal Demin *
3 * based on usbprog.c and arm-jtag-ew.c *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
25 #include <jtag/interface.h>
26 #include <jtag/commands.h>
30 #include <sys/ioctl.h>
33 /*#define DEBUG_SERIAL */
34 static int buspirate_execute_queue(void);
35 static int buspirate_speed(int speed);
36 static int buspirate_khz(int khz, int *jtag_speed);
37 static int buspirate_init(void);
38 static int buspirate_quit(void);
40 static void buspirate_end_state(tap_state_t state);
41 static void buspirate_state_move(void);
42 static void buspirate_path_move(int num_states, tap_state_t *path);
43 static void buspirate_runtest(int num_cycles);
44 static void buspirate_scan(bool ir_scan, enum scan_type type,
45 uint8_t *buffer, int scan_size, struct scan_command *command);
48 #define CMD_UNKNOWN 0x00
49 #define CMD_PORT_MODE 0x01
50 #define CMD_FEATURE 0x02
51 #define CMD_READ_ADCS 0x03
52 /*#define CMD_TAP_SHIFT 0x04 // old protocol */
53 #define CMD_TAP_SHIFT 0x05
54 #define CMD_ENTER_OOCD 0x06
55 #define CMD_UART_SPEED 0x07
56 #define CMD_JTAG_SPEED 0x08
58 /* Not all OSes have this speed defined */
59 #if !defined(B1000000)
60 #define B1000000 0010010
65 MODE_JTAG = 1, /* push-pull outputs */
66 MODE_JTAG_OD = 2, /* open-drain outputs */
88 static int buspirate_fd = -1;
89 static int buspirate_pinmode = MODE_JTAG_OD;
90 static int buspirate_baudrate = SERIAL_NORMAL;
91 static int buspirate_vreg;
92 static int buspirate_pullup;
93 static char *buspirate_port;
97 static void buspirate_tap_init(void);
98 static int buspirate_tap_execute(void);
99 static void buspirate_tap_append(int tms, int tdi);
100 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
101 struct scan_command *command);
102 static void buspirate_tap_make_space(int scan, int bits);
104 static void buspirate_reset(int trst, int srst);
106 /* low level interface */
107 static void buspirate_jtag_reset(int);
108 static void buspirate_jtag_enable(int);
109 static unsigned char buspirate_jtag_command(int, char *, int);
110 static void buspirate_jtag_set_speed(int, char);
111 static void buspirate_jtag_set_mode(int, char);
112 static void buspirate_jtag_set_feature(int, char, char);
113 static void buspirate_jtag_get_adcs(int);
115 /* low level HW communication interface */
116 static int buspirate_serial_open(char *port);
117 static int buspirate_serial_setspeed(int fd, char speed);
118 static int buspirate_serial_write(int fd, char *buf, int size);
119 static int buspirate_serial_read(int fd, char *buf, int size);
120 static void buspirate_serial_close(int fd);
121 static void buspirate_print_buffer(char *buf, int size);
123 static int buspirate_speed(int speed)
126 LOG_INFO("Want to set speed to %dkHz, but not implemented yet", speed);
130 static int buspirate_khz(int khz, int *jtag_speed)
136 static int buspirate_execute_queue(void)
138 /* currently processed command */
139 struct jtag_command *cmd = jtag_command_queue;
147 DEBUG_JTAG_IO("runtest %i cycles, end in %s",
148 cmd->cmd.runtest->num_cycles,
149 tap_state_name(cmd->cmd.runtest
151 buspirate_end_state(cmd->cmd.runtest
153 buspirate_runtest(cmd->cmd.runtest
157 DEBUG_JTAG_IO("statemove end in %s",
158 tap_state_name(cmd->cmd.statemove
160 buspirate_end_state(cmd->cmd.statemove
162 buspirate_state_move();
165 DEBUG_JTAG_IO("pathmove: %i states, end in %s",
166 cmd->cmd.pathmove->num_states,
167 tap_state_name(cmd->cmd.pathmove
168 ->path[cmd->cmd.pathmove
170 buspirate_path_move(cmd->cmd.pathmove
172 cmd->cmd.pathmove->path);
175 DEBUG_JTAG_IO("scan end in %s",
176 tap_state_name(cmd->cmd.scan
179 buspirate_end_state(cmd->cmd.scan
182 scan_size = jtag_build_buffer(cmd->cmd.scan,
184 type = jtag_scan_type(cmd->cmd.scan);
185 buspirate_scan(cmd->cmd.scan->ir_scan, type,
186 buffer, scan_size, cmd->cmd.scan);
190 DEBUG_JTAG_IO("reset trst: %i srst %i",
191 cmd->cmd.reset->trst, cmd->cmd.reset->srst);
193 /* flush buffers, so we can reset */
194 buspirate_tap_execute();
196 if (cmd->cmd.reset->trst == 1)
197 tap_set_state(TAP_RESET);
198 buspirate_reset(cmd->cmd.reset->trst,
199 cmd->cmd.reset->srst);
202 DEBUG_JTAG_IO("sleep %i", cmd->cmd.sleep->us);
203 buspirate_tap_execute();
204 jtag_sleep(cmd->cmd.sleep->us);
207 LOG_ERROR("BUG: unknown JTAG command type encountered");
214 return buspirate_tap_execute();
217 static int buspirate_init(void)
219 if (buspirate_port == NULL) {
220 LOG_ERROR("You need to specify the serial port!");
221 return ERROR_JTAG_INIT_FAILED;
224 buspirate_fd = buspirate_serial_open(buspirate_port);
225 if (buspirate_fd == -1) {
226 LOG_ERROR("Could not open serial port");
227 return ERROR_JTAG_INIT_FAILED;
230 buspirate_serial_setspeed(buspirate_fd, SERIAL_NORMAL);
232 buspirate_jtag_enable(buspirate_fd);
234 if (buspirate_baudrate != SERIAL_NORMAL)
235 buspirate_jtag_set_speed(buspirate_fd, SERIAL_FAST);
237 LOG_INFO("Buspirate Interface ready!");
239 buspirate_tap_init();
240 buspirate_jtag_set_mode(buspirate_fd, buspirate_pinmode);
241 buspirate_jtag_set_feature(buspirate_fd, FEATURE_VREG,
242 (buspirate_vreg == 1) ? ACTION_ENABLE : ACTION_DISABLE);
243 buspirate_jtag_set_feature(buspirate_fd, FEATURE_PULLUP,
244 (buspirate_pullup == 1) ? ACTION_ENABLE : ACTION_DISABLE);
245 buspirate_reset(0, 0);
250 static int buspirate_quit(void)
252 LOG_INFO("Shutting down buspirate.");
253 buspirate_jtag_set_mode(buspirate_fd, MODE_HIZ);
255 buspirate_jtag_set_speed(buspirate_fd, SERIAL_NORMAL);
256 buspirate_jtag_reset(buspirate_fd);
258 buspirate_serial_close(buspirate_fd);
260 if (buspirate_port) {
261 free(buspirate_port);
262 buspirate_port = NULL;
267 /* openocd command interface */
268 COMMAND_HANDLER(buspirate_handle_adc_command)
270 if (buspirate_fd == -1)
273 /* send the command */
274 buspirate_jtag_get_adcs(buspirate_fd);
280 COMMAND_HANDLER(buspirate_handle_vreg_command)
283 LOG_ERROR("usage: buspirate_vreg <1|0>");
287 if (atoi(CMD_ARGV[0]) == 1)
289 else if (atoi(CMD_ARGV[0]) == 0)
292 LOG_ERROR("usage: buspirate_vreg <1|0>");
298 COMMAND_HANDLER(buspirate_handle_pullup_command)
301 LOG_ERROR("usage: buspirate_pullup <1|0>");
305 if (atoi(CMD_ARGV[0]) == 1)
306 buspirate_pullup = 1;
307 else if (atoi(CMD_ARGV[0]) == 0)
308 buspirate_pullup = 0;
310 LOG_ERROR("usage: buspirate_pullup <1|0>");
316 COMMAND_HANDLER(buspirate_handle_led_command)
319 LOG_ERROR("usage: buspirate_led <1|0>");
323 if (atoi(CMD_ARGV[0]) == 1) {
325 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
327 } else if (atoi(CMD_ARGV[0]) == 0) {
329 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
332 LOG_ERROR("usage: buspirate_led <1|0>");
339 COMMAND_HANDLER(buspirate_handle_mode_command)
342 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
346 if (CMD_ARGV[0][0] == 'n')
347 buspirate_pinmode = MODE_JTAG;
348 else if (CMD_ARGV[0][0] == 'o')
349 buspirate_pinmode = MODE_JTAG_OD;
351 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
357 COMMAND_HANDLER(buspirate_handle_speed_command)
360 LOG_ERROR("usage: buspirate_speed <normal|fast>");
364 if (CMD_ARGV[0][0] == 'n')
365 buspirate_baudrate = SERIAL_NORMAL;
366 else if (CMD_ARGV[0][0] == 'f')
367 buspirate_baudrate = SERIAL_FAST;
369 LOG_ERROR("usage: buspirate_speed <normal|fast>");
375 COMMAND_HANDLER(buspirate_handle_port_command)
378 LOG_ERROR("usage: buspirate_port /dev/ttyUSB0");
382 if (buspirate_port == NULL)
383 buspirate_port = strdup(CMD_ARGV[0]);
389 static const struct command_registration buspirate_command_handlers[] = {
391 .name = "buspirate_adc",
392 .handler = &buspirate_handle_adc_command,
393 .mode = COMMAND_EXEC,
394 .help = "reads voltages on adc pins",
397 .name = "buspirate_vreg",
398 .handler = &buspirate_handle_vreg_command,
399 .mode = COMMAND_CONFIG,
400 .help = "changes the state of voltage regulators",
403 .name = "buspirate_pullup",
404 .handler = &buspirate_handle_pullup_command,
405 .mode = COMMAND_CONFIG,
406 .help = "changes the state of pullup",
409 .name = "buspirate_led",
410 .handler = &buspirate_handle_led_command,
411 .mode = COMMAND_EXEC,
412 .help = "changes the state of led",
415 .name = "buspirate_speed",
416 .handler = &buspirate_handle_speed_command,
417 .mode = COMMAND_CONFIG,
418 .help = "speed of the interface",
421 .name = "buspirate_mode",
422 .handler = &buspirate_handle_mode_command,
423 .mode = COMMAND_CONFIG,
424 .help = "pin mode of the interface",
427 .name = "buspirate_port",
428 .handler = &buspirate_handle_port_command,
429 .mode = COMMAND_CONFIG,
430 .help = "name of the serial port to open",
432 COMMAND_REGISTRATION_DONE
435 struct jtag_interface buspirate_interface = {
437 .execute_queue = buspirate_execute_queue,
438 .speed = buspirate_speed,
439 .khz = buspirate_khz,
440 .commands = buspirate_command_handlers,
441 .init = buspirate_init,
442 .quit = buspirate_quit
445 /*************** jtag execute commands **********************/
446 static void buspirate_end_state(tap_state_t state)
448 if (tap_is_state_stable(state))
449 tap_set_end_state(state);
451 LOG_ERROR("BUG: %i is not a valid end state", state);
456 static void buspirate_state_move(void)
459 uint8_t tms_scan = tap_get_tms_path(tap_get_state(),
460 tap_get_end_state());
461 int tms_count = tap_get_tms_path_len(tap_get_state(),
462 tap_get_end_state());
464 for (i = 0; i < tms_count; i++) {
465 tms = (tms_scan >> i) & 1;
466 buspirate_tap_append(tms, 0);
469 tap_set_state(tap_get_end_state());
472 static void buspirate_path_move(int num_states, tap_state_t *path)
476 for (i = 0; i < num_states; i++) {
477 if (tap_state_transition(tap_get_state(), false) == path[i]) {
478 buspirate_tap_append(0, 0);
479 } else if (tap_state_transition(tap_get_state(), true)
481 buspirate_tap_append(1, 0);
483 LOG_ERROR("BUG: %s -> %s isn't a valid "
485 tap_state_name(tap_get_state()),
486 tap_state_name(path[i]));
490 tap_set_state(path[i]);
493 tap_set_end_state(tap_get_state());
496 static void buspirate_runtest(int num_cycles)
500 tap_state_t saved_end_state = tap_get_end_state();
502 /* only do a state_move when we're not already in IDLE */
503 if (tap_get_state() != TAP_IDLE) {
504 buspirate_end_state(TAP_IDLE);
505 buspirate_state_move();
508 for (i = 0; i < num_cycles; i++)
509 buspirate_tap_append(0, 0);
511 DEBUG_JTAG_IO("runtest: cur_state %s end_state %s",
512 tap_state_name(tap_get_state()),
513 tap_state_name(tap_get_end_state()));
515 /* finish in end_state */
516 buspirate_end_state(saved_end_state);
517 if (tap_get_state() != tap_get_end_state())
518 buspirate_state_move();
521 static void buspirate_scan(bool ir_scan, enum scan_type type,
522 uint8_t *buffer, int scan_size, struct scan_command *command)
524 tap_state_t saved_end_state;
526 buspirate_tap_make_space(1, scan_size+8);
527 /* is 8 correct ? (2 moves = 16) */
529 saved_end_state = tap_get_end_state();
531 buspirate_end_state(ir_scan ? TAP_IRSHIFT : TAP_DRSHIFT);
532 buspirate_state_move();
534 buspirate_tap_append_scan(scan_size, buffer, command);
537 buspirate_tap_append(0, 0);
539 /* restore the saved state */
540 buspirate_end_state(saved_end_state);
541 tap_set_state(ir_scan ? TAP_IRPAUSE : TAP_DRPAUSE);
543 if (tap_get_state() != tap_get_end_state())
544 buspirate_state_move();
548 /************************* TAP related stuff **********/
550 #define BUSPIRATE_BUFFER_SIZE 1024
551 #define BUSPIRATE_MAX_PENDING_SCANS 32
553 static char tms_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
554 static char tdi_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
555 static int tap_chain_index;
557 struct pending_scan_result /* this was stolen from arm-jtag-ew */
559 int first; /* First bit position in tdo_buffer to read */
560 int length; /* Number of bits to read */
561 struct scan_command *command; /* Corresponding scan command */
565 static struct pending_scan_result
566 tap_pending_scans[BUSPIRATE_MAX_PENDING_SCANS];
567 static int tap_pending_scans_num;
569 static void buspirate_tap_init(void)
572 tap_pending_scans_num = 0;
575 static int buspirate_tap_execute(void)
584 if (tap_chain_index <= 0)
587 LOG_DEBUG("executing tap num bits = %i scans = %i",
588 tap_chain_index, tap_pending_scans_num);
590 bytes_to_send = (tap_chain_index+7) / 8;
592 tmp[0] = CMD_TAP_SHIFT; /* this command expects number of bits */
593 tmp[1] = (char)(tap_chain_index >> 8); /* high */
594 tmp[2] = (char)(tap_chain_index); /* low */
597 for (i = 0; i < bytes_to_send; i++) {
598 tmp[fill_index] = tdi_chain[i];
600 tmp[fill_index] = tms_chain[i];
604 ret = buspirate_serial_write(buspirate_fd, tmp, 3 + bytes_to_send*2);
605 if (ret != bytes_to_send*2+3) {
606 LOG_ERROR("error writing :(");
607 return ERROR_JTAG_DEVICE_ERROR;
610 ret = buspirate_serial_read(buspirate_fd, tmp, bytes_to_send + 3);
611 if (ret != bytes_to_send + 3) {
612 LOG_ERROR("error reading");
615 in_buf = (uint8_t *)(&tmp[3]);
617 /* parse the scans */
618 for (i = 0; i < tap_pending_scans_num; i++) {
619 uint8_t *buffer = tap_pending_scans[i].buffer;
620 int length = tap_pending_scans[i].length;
621 int first = tap_pending_scans[i].first;
622 struct scan_command *command = tap_pending_scans[i].command;
624 /* copy bits from buffer */
625 buf_set_buf(in_buf, first, buffer, 0, length);
627 /* return buffer to higher level */
628 if (jtag_read_buffer(buffer, command) != ERROR_OK) {
629 buspirate_tap_init();
630 return ERROR_JTAG_QUEUE_FAILED;
635 tap_pending_scans_num = 0;
640 static void buspirate_tap_make_space(int scans, int bits)
642 int have_scans = BUSPIRATE_MAX_PENDING_SCANS - tap_pending_scans_num;
643 int have_bits = BUSPIRATE_BUFFER_SIZE * 8 - tap_chain_index;
645 if ((have_scans < scans) || (have_bits < bits))
646 buspirate_tap_execute();
649 static void buspirate_tap_append(int tms, int tdi)
653 buspirate_tap_make_space(0, 1);
654 chain_index = tap_chain_index / 8;
656 if (chain_index < BUSPIRATE_BUFFER_SIZE) {
657 int bit_index = tap_chain_index % 8;
658 uint8_t bit = 1 << bit_index;
661 tms_chain[chain_index] |= bit;
663 tms_chain[chain_index] &= ~bit;
666 tdi_chain[chain_index] |= bit;
668 tdi_chain[chain_index] &= ~bit;
672 LOG_ERROR("tap_chain overflow, bad things will happen");
676 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
677 struct scan_command *command)
680 tap_pending_scans[tap_pending_scans_num].length = length;
681 tap_pending_scans[tap_pending_scans_num].buffer = buffer;
682 tap_pending_scans[tap_pending_scans_num].command = command;
683 tap_pending_scans[tap_pending_scans_num].first = tap_chain_index;
685 for (i = 0; i < length; i++) {
686 int tms = (i < length-1 ? 0 : 1);
687 int tdi = (buffer[i/8] >> (i%8)) & 1;
688 buspirate_tap_append(tms, tdi);
690 tap_pending_scans_num++;
693 /*************** jtag wrapper functions *********************/
695 /* (1) assert or (0) deassert reset lines */
696 static void buspirate_reset(int trst, int srst)
698 LOG_DEBUG("trst: %i, srst: %i", trst, srst);
701 buspirate_jtag_set_feature(buspirate_fd,
702 FEATURE_TRST, ACTION_DISABLE);
704 buspirate_jtag_set_feature(buspirate_fd,
705 FEATURE_TRST, ACTION_ENABLE);
708 buspirate_jtag_set_feature(buspirate_fd,
709 FEATURE_SRST, ACTION_DISABLE);
711 buspirate_jtag_set_feature(buspirate_fd,
712 FEATURE_SRST, ACTION_ENABLE);
715 /*************** jtag lowlevel functions ********************/
716 static void buspirate_jtag_enable(int fd)
719 char tmp[21] = { [0 ... 20] = 0x00 };
723 LOG_DEBUG("Entering binary mode");
724 buspirate_serial_write(fd, tmp, 20);
727 /* reads 1 to n "BBIO1"s and one "OCD1" */
729 ret = buspirate_serial_read(fd, tmp, 4);
731 LOG_ERROR("Buspirate error. Is binary"
732 "/OpenOCD support enabled?");
735 if (strncmp(tmp, "BBIO", 4) == 0) {
736 ret = buspirate_serial_read(fd, tmp, 1);
738 LOG_ERROR("Buspirate did not answer correctly! "
739 "Do you have correct firmware?");
743 LOG_ERROR("Unsupported binary protocol");
748 tmp[0] = CMD_ENTER_OOCD;
749 ret = buspirate_serial_write(fd, tmp, 1);
751 LOG_ERROR("error reading");
755 } else if (strncmp(tmp, "OCD1", 4) == 0)
758 LOG_ERROR("Buspirate did not answer correctly! "
759 "Do you have correct firmware?");
766 static void buspirate_jtag_reset(int fd)
770 tmp[0] = 0x00; /* exit OCD1 mode */
771 buspirate_serial_write(fd, tmp, 1);
773 /* We ignore the return value here purposly, nothing we can do */
774 buspirate_serial_read(fd, tmp, 5);
775 if (strncmp(tmp, "BBIO1", 5) == 0) {
776 tmp[0] = 0x0F; /* reset BP */
777 buspirate_serial_write(fd, tmp, 1);
779 LOG_ERROR("Unable to restart buspirate!");
782 static void buspirate_jtag_set_speed(int fd, char speed)
791 tmp[0] = CMD_UART_SPEED;
793 buspirate_jtag_command(fd, tmp, 2);
795 /* here the adapter changes speed, we need follow */
796 buspirate_serial_setspeed(fd, speed);
798 buspirate_serial_write(fd, ack, 2);
799 ret = buspirate_serial_read(fd, tmp, 2);
801 LOG_ERROR("Buspirate did not ack speed change");
804 if ((tmp[0] != CMD_UART_SPEED) || (tmp[1] != speed)) {
805 LOG_ERROR("Buspirate did not reply as expected");
808 LOG_INFO("Buspirate switched to %s mode",
809 (speed == SERIAL_NORMAL) ? "normal" : "FAST");
813 static void buspirate_jtag_set_mode(int fd, char mode)
816 tmp[0] = CMD_PORT_MODE;
818 buspirate_jtag_command(fd, tmp, 2);
821 static void buspirate_jtag_set_feature(int fd, char feat, char action)
824 tmp[0] = CMD_FEATURE;
825 tmp[1] = feat; /* what */
826 tmp[2] = action; /* action */
827 buspirate_jtag_command(fd, tmp, 3);
830 static void buspirate_jtag_get_adcs(int fd)
834 tmp[0] = CMD_READ_ADCS;
835 buspirate_jtag_command(fd, (char *)tmp, 1);
836 a = tmp[2] << 8 | tmp[3];
837 b = tmp[4] << 8 | tmp[5];
838 c = tmp[6] << 8 | tmp[7];
839 d = tmp[8] << 8 | tmp[9];
841 LOG_INFO("ADC: ADC_Pin = %.02f VPullup = %.02f V33 = %.02f "
843 ((float)a)/155.1515, ((float)b)/155.1515,
844 ((float)c)/155.1515, ((float)d)/155.1515);
847 static unsigned char buspirate_jtag_command(int fd,
848 char *cmd, int cmdlen)
853 res = buspirate_serial_write(fd, cmd, cmdlen);
855 if ((cmd[0] == CMD_UART_SPEED)
856 || (cmd[0] == CMD_PORT_MODE)
857 || (cmd[0] == CMD_FEATURE)
858 || (cmd[0] == CMD_JTAG_SPEED))
864 len = 10; /* 2*sizeof(char)+4*sizeof(uint16_t) */
872 res = buspirate_serial_read(fd, cmd, len);
874 return (unsigned char)cmd[1];
882 /* low level serial port */
883 /* TODO add support for WIN32 and others ! */
884 static int buspirate_serial_open(char *port)
887 fd = open(buspirate_port, O_RDWR | O_NOCTTY | O_NDELAY);
891 static int buspirate_serial_setspeed(int fd, char speed)
893 struct termios t_opt;
894 speed_t baud = (speed == SERIAL_FAST) ? B1000000 : B115200;
896 /* set the serial port parameters */
897 fcntl(fd, F_SETFL, 0);
898 tcgetattr(fd, &t_opt);
899 cfsetispeed(&t_opt, baud);
900 cfsetospeed(&t_opt, baud);
901 t_opt.c_cflag |= (CLOCAL | CREAD);
902 t_opt.c_cflag &= ~PARENB;
903 t_opt.c_cflag &= ~CSTOPB;
904 t_opt.c_cflag &= ~CSIZE;
905 t_opt.c_cflag |= CS8;
906 t_opt.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
907 t_opt.c_iflag &= ~(IXON | IXOFF | IXANY);
908 t_opt.c_oflag &= ~OPOST;
909 t_opt.c_cc[VMIN] = 0;
910 t_opt.c_cc[VTIME] = 10;
911 tcflush(fd, TCIFLUSH);
912 tcsetattr(fd, TCSANOW, &t_opt);
917 static int buspirate_serial_write(int fd, char *buf, int size)
921 ret = write(fd, buf, size);
923 LOG_DEBUG("size = %d ret = %d", size, ret);
924 buspirate_print_buffer(buf, size);
927 LOG_ERROR("Error sending data");
932 static int buspirate_serial_read(int fd, char *buf, int size)
939 ret = read(fd, buf+len, size-len);
955 LOG_DEBUG("should have read = %d actual size = %d", size, len);
956 buspirate_print_buffer(buf, len);
959 LOG_ERROR("Error reading data");
964 static void buspirate_serial_close(int fd)
970 #define BYTES_PER_LINE 16
971 static void buspirate_print_buffer(char *buf, int size)
973 char line[LINE_SIZE];
978 while (offset < size) {
979 snprintf(tmp, 5, "%02x ", (uint8_t)buf[offset]);
984 if (offset % BYTES_PER_LINE == 0) {
985 LOG_DEBUG("%s", line);
991 LOG_DEBUG("%s", line);