git.gag.com Git - fw/openocd/blob - src/jtag/adapter.c

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de>
   4  * Copyright (C) 2007-2010 Øyvind Harboe <oyvind.harboe@zylin.com>
   5  * Copyright (C) 2009 SoftPLC Corporation, http://softplc.com, Dick Hollenbeck <dick@softplc.com>
   6  * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net>
   7  * Copyright (C) 2018 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
   8  */
   9
  10 #ifdef HAVE_CONFIG_H
  11 #include "config.h"
  12 #endif
  13
  14 #include "adapter.h"
  15 #include "jtag.h"
  16 #include "minidriver.h"
  17 #include "interface.h"
  18 #include "interfaces.h"
  19 #include <transport/transport.h>
  20
  21 #ifdef HAVE_STRINGS_H
  22 #include <strings.h>
  23 #endif
  24
  25 /**
  26  * @file
  27  * Holds support for configuring debug adapters from TCl scripts.
  28  */
  29
  30 struct adapter_driver *adapter_driver;
  31 const char * const jtag_only[] = { "jtag", NULL };
  32
  33 enum adapter_clk_mode {
  34         CLOCK_MODE_UNSELECTED = 0,
  35         CLOCK_MODE_KHZ,
  36         CLOCK_MODE_RCLK
  37 };
  38
  39 /**
  40  * Adapter configuration
  41  */
  42 static struct {
  43         bool adapter_initialized;
  44         char *usb_location;
  45         enum adapter_clk_mode clock_mode;
  46         int speed_khz;
  47         int rclk_fallback_speed_khz;
  48 } adapter_config;
  49
  50 bool is_adapter_initialized(void)
  51 {
  52         return adapter_config.adapter_initialized;
  53 }
  54
  55 /**
  56  * Do low-level setup like initializing registers, output signals,
  57  * and clocking.
  58  */
  59 int adapter_init(struct command_context *cmd_ctx)
  60 {
  61         if (is_adapter_initialized())
  62                 return ERROR_OK;
  63
  64         if (!adapter_driver) {
  65                 /* nothing was previously specified by "adapter driver" command */
  66                 LOG_ERROR("Debug Adapter has to be specified, "
  67                         "see \"adapter driver\" command");
  68                 return ERROR_JTAG_INVALID_INTERFACE;
  69         }
  70
  71         int retval;
  72         retval = adapter_driver->init();
  73         if (retval != ERROR_OK)
  74                 return retval;
  75         adapter_config.adapter_initialized = true;
  76
  77         if (!adapter_driver->speed) {
  78                 LOG_INFO("This adapter doesn't support configurable speed");
  79                 return ERROR_OK;
  80         }
  81
  82         if (adapter_config.clock_mode == CLOCK_MODE_UNSELECTED) {
  83                 LOG_ERROR("An adapter speed is not selected in the init script."
  84                         " Insert a call to \"adapter speed\" or \"jtag_rclk\" to proceed.");
  85                 return ERROR_JTAG_INIT_FAILED;
  86         }
  87
  88         int requested_khz = adapter_get_speed_khz();
  89         int actual_khz = requested_khz;
  90         int speed_var = 0;
  91         retval = adapter_get_speed(&speed_var);
  92         if (retval != ERROR_OK)
  93                 return retval;
  94         retval = adapter_driver->speed(speed_var);
  95         if (retval != ERROR_OK)
  96                 return retval;
  97         retval = adapter_get_speed_readable(&actual_khz);
  98         if (retval != ERROR_OK)
  99                 LOG_INFO("adapter-specific clock speed value %d", speed_var);
 100         else if (actual_khz) {
 101                 /* Adaptive clocking -- JTAG-specific */
 102                 if ((adapter_config.clock_mode == CLOCK_MODE_RCLK)
 103                                 || ((adapter_config.clock_mode == CLOCK_MODE_KHZ) && !requested_khz)) {
 104                         LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
 105                         , actual_khz);
 106                 } else
 107                         LOG_INFO("clock speed %d kHz", actual_khz);
 108         } else
 109                 LOG_INFO("RCLK (adaptive clock speed)");
 110
 111         return ERROR_OK;
 112 }
 113
 114 int adapter_quit(void)
 115 {
 116         if (is_adapter_initialized() && adapter_driver->quit) {
 117                 /* close the JTAG interface */
 118                 int result = adapter_driver->quit();
 119                 if (result != ERROR_OK)
 120                         LOG_ERROR("failed: %d", result);
 121         }
 122
 123         struct jtag_tap *t = jtag_all_taps();
 124         while (t) {
 125                 struct jtag_tap *n = t->next_tap;
 126                 jtag_tap_free(t);
 127                 t = n;
 128         }
 129
 130         return ERROR_OK;
 131 }
 132
 133 unsigned int adapter_get_speed_khz(void)
 134 {
 135         return adapter_config.speed_khz;
 136 }
 137
 138 static int adapter_khz_to_speed(unsigned int khz, int *speed)
 139 {
 140         LOG_DEBUG("convert khz to adapter specific speed value");
 141         adapter_config.speed_khz = khz;
 142         if (!is_adapter_initialized())
 143                 return ERROR_OK;
 144         LOG_DEBUG("have adapter set up");
 145         if (!adapter_driver->khz) {
 146                 LOG_ERROR("Translation from khz to adapter speed not implemented");
 147                 return ERROR_FAIL;
 148         }
 149         int speed_div1;
 150         int retval = adapter_driver->khz(adapter_get_speed_khz(), &speed_div1);
 151         if (retval != ERROR_OK)
 152                 return retval;
 153         *speed = speed_div1;
 154         return ERROR_OK;
 155 }
 156
 157 static int adapter_rclk_to_speed(unsigned int fallback_speed_khz, int *speed)
 158 {
 159         int retval = adapter_khz_to_speed(0, speed);
 160         if ((retval != ERROR_OK) && fallback_speed_khz) {
 161                 LOG_DEBUG("trying fallback speed...");
 162                 retval = adapter_khz_to_speed(fallback_speed_khz, speed);
 163         }
 164         return retval;
 165 }
 166
 167 static int adapter_set_speed(int speed)
 168 {
 169         /* this command can be called during CONFIG,
 170          * in which case adapter isn't initialized */
 171         return is_adapter_initialized() ? adapter_driver->speed(speed) : ERROR_OK;
 172 }
 173
 174 int adapter_config_khz(unsigned int khz)
 175 {
 176         LOG_DEBUG("handle adapter khz");
 177         adapter_config.clock_mode = CLOCK_MODE_KHZ;
 178         int speed = 0;
 179         int retval = adapter_khz_to_speed(khz, &speed);
 180         return (retval != ERROR_OK) ? retval : adapter_set_speed(speed);
 181 }
 182
 183 int adapter_config_rclk(unsigned int fallback_speed_khz)
 184 {
 185         LOG_DEBUG("handle adapter rclk");
 186         adapter_config.clock_mode = CLOCK_MODE_RCLK;
 187         adapter_config.rclk_fallback_speed_khz = fallback_speed_khz;
 188         int speed = 0;
 189         int retval = adapter_rclk_to_speed(fallback_speed_khz, &speed);
 190         return (retval != ERROR_OK) ? retval : adapter_set_speed(speed);
 191 }
 192
 193 int adapter_get_speed(int *speed)
 194 {
 195         switch (adapter_config.clock_mode) {
 196                 case CLOCK_MODE_KHZ:
 197                         adapter_khz_to_speed(adapter_get_speed_khz(), speed);
 198                         break;
 199                 case CLOCK_MODE_RCLK:
 200                         adapter_rclk_to_speed(adapter_config.rclk_fallback_speed_khz, speed);
 201                         break;
 202                 default:
 203                         LOG_ERROR("BUG: unknown adapter clock mode");
 204                         return ERROR_FAIL;
 205         }
 206         return ERROR_OK;
 207 }
 208
 209 int adapter_get_speed_readable(int *khz)
 210 {
 211         int speed_var = 0;
 212         int retval = adapter_get_speed(&speed_var);
 213         if (retval != ERROR_OK)
 214                 return retval;
 215         if (!is_adapter_initialized())
 216                 return ERROR_OK;
 217         if (!adapter_driver->speed_div) {
 218                 LOG_ERROR("Translation from adapter speed to khz not implemented");
 219                 return ERROR_FAIL;
 220         }
 221         return adapter_driver->speed_div(speed_var, khz);
 222 }
 223
 224 /*
 225  * 1 char: bus
 226  * 2 * 7 chars: max 7 ports
 227  * 1 char: test for overflow
 228  * ------
 229  * 16 chars
 230  */
 231 #define USB_MAX_LOCATION_LENGTH         16
 232
 233 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 234 static void adapter_usb_set_location(const char *location)
 235 {
 236         if (strnlen(location, USB_MAX_LOCATION_LENGTH) == USB_MAX_LOCATION_LENGTH)
 237                 LOG_WARNING("usb location string is too long!!");
 238
 239         free(adapter_config.usb_location);
 240
 241         adapter_config.usb_location = strndup(location, USB_MAX_LOCATION_LENGTH);
 242 }
 243 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 244
 245 const char *adapter_usb_get_location(void)
 246 {
 247         return adapter_config.usb_location;
 248 }
 249
 250 bool adapter_usb_location_equal(uint8_t dev_bus, uint8_t *port_path, size_t path_len)
 251 {
 252         size_t path_step, string_length;
 253         char *ptr, *loc;
 254         bool equal = false;
 255
 256         if (!adapter_usb_get_location())
 257                 return equal;
 258
 259         /* strtok need non const char */
 260         loc = strndup(adapter_usb_get_location(), USB_MAX_LOCATION_LENGTH);
 261         string_length = strnlen(loc, USB_MAX_LOCATION_LENGTH);
 262
 263         ptr = strtok(loc, "-");
 264         if (!ptr) {
 265                 LOG_WARNING("no '-' in usb path\n");
 266                 goto done;
 267         }
 268
 269         string_length -= strnlen(ptr, string_length);
 270         /* check bus mismatch */
 271         if (atoi(ptr) != dev_bus)
 272                 goto done;
 273
 274         path_step = 0;
 275         while (path_step < path_len) {
 276                 ptr = strtok(NULL, ".");
 277
 278                 /* no more tokens in path */
 279                 if (!ptr)
 280                         break;
 281
 282                 /* path mismatch at some step */
 283                 if (path_step < path_len && atoi(ptr) != port_path[path_step])
 284                         break;
 285
 286                 path_step++;
 287                 string_length -= strnlen(ptr, string_length) + 1;
 288         };
 289
 290         /* walked the full path, all elements match */
 291         if (path_step == path_len && !string_length)
 292                 equal = true;
 293
 294 done:
 295         free(loc);
 296         return equal;
 297 }
 298
 299 static int jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
 300 {
 301         struct jim_getopt_info goi;
 302         jim_getopt_setup(&goi, interp, argc-1, argv + 1);
 303
 304         /* return the name of the interface */
 305         /* TCL code might need to know the exact type... */
 306         /* FUTURE: we allow this as a means to "set" the interface. */
 307         if (goi.argc != 0) {
 308                 Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
 309                 return JIM_ERR;
 310         }
 311         const char *name = adapter_driver ? adapter_driver->name : NULL;
 312         Jim_SetResultString(goi.interp, name ? name : "undefined", -1);
 313         return JIM_OK;
 314 }
 315
 316 COMMAND_HANDLER(adapter_transports_command)
 317 {
 318         char **transports;
 319         int retval;
 320
 321         retval = CALL_COMMAND_HANDLER(transport_list_parse, &transports);
 322         if (retval != ERROR_OK)
 323                 return retval;
 324
 325         retval = allow_transports(CMD_CTX, (const char **)transports);
 326
 327         if (retval != ERROR_OK) {
 328                 for (unsigned i = 0; transports[i]; i++)
 329                         free(transports[i]);
 330                 free(transports);
 331         }
 332         return retval;
 333 }
 334
 335 COMMAND_HANDLER(handle_adapter_list_command)
 336 {
 337         if (strcmp(CMD_NAME, "list") == 0 && CMD_ARGC > 0)
 338                 return ERROR_COMMAND_SYNTAX_ERROR;
 339
 340         command_print(CMD, "The following debug adapters are available:");
 341         for (unsigned i = 0; adapter_drivers[i]; i++) {
 342                 const char *name = adapter_drivers[i]->name;
 343                 command_print(CMD, "%u: %s", i + 1, name);
 344         }
 345
 346         return ERROR_OK;
 347 }
 348
 349 COMMAND_HANDLER(handle_adapter_driver_command)
 350 {
 351         int retval;
 352
 353         /* check whether the interface is already configured */
 354         if (adapter_driver) {
 355                 LOG_WARNING("Interface already configured, ignoring");
 356                 return ERROR_OK;
 357         }
 358
 359         /* interface name is a mandatory argument */
 360         if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
 361                 return ERROR_COMMAND_SYNTAX_ERROR;
 362
 363         for (unsigned i = 0; adapter_drivers[i]; i++) {
 364                 if (strcmp(CMD_ARGV[0], adapter_drivers[i]->name) != 0)
 365                         continue;
 366
 367                 if (adapter_drivers[i]->commands) {
 368                         retval = register_commands(CMD_CTX, NULL,
 369                                         adapter_drivers[i]->commands);
 370                         if (retval != ERROR_OK)
 371                                 return retval;
 372                 }
 373
 374                 adapter_driver = adapter_drivers[i];
 375
 376                 return allow_transports(CMD_CTX, adapter_driver->transports);
 377         }
 378
 379         /* no valid interface was found (i.e. the configuration option,
 380          * didn't match one of the compiled-in interfaces
 381          */
 382         LOG_ERROR("The specified debug interface was not found (%s)",
 383                                 CMD_ARGV[0]);
 384         CALL_COMMAND_HANDLER(handle_adapter_list_command);
 385         return ERROR_JTAG_INVALID_INTERFACE;
 386 }
 387
 388 COMMAND_HANDLER(handle_reset_config_command)
 389 {
 390         int new_cfg = 0;
 391         int mask = 0;
 392
 393         /* Original versions cared about the order of these tokens:
 394          *   reset_config signals [combination [trst_type [srst_type]]]
 395          * They also clobbered the previous configuration even on error.
 396          *
 397          * Here we don't care about the order, and only change values
 398          * which have been explicitly specified.
 399          */
 400         for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
 401                 int tmp = 0;
 402                 int m;
 403
 404                 /* gating */
 405                 m = RESET_SRST_NO_GATING;
 406                 if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
 407                         /* default: don't use JTAG while SRST asserted */;
 408                 else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
 409                         tmp = RESET_SRST_NO_GATING;
 410                 else
 411                         m = 0;
 412                 if (mask & m) {
 413                         LOG_ERROR("extra reset_config %s spec (%s)",
 414                                         "gating", *CMD_ARGV);
 415                         return ERROR_COMMAND_SYNTAX_ERROR;
 416                 }
 417                 if (m)
 418                         goto next;
 419
 420                 /* signals */
 421                 m = RESET_HAS_TRST | RESET_HAS_SRST;
 422                 if (strcmp(*CMD_ARGV, "none") == 0)
 423                         tmp = RESET_NONE;
 424                 else if (strcmp(*CMD_ARGV, "trst_only") == 0)
 425                         tmp = RESET_HAS_TRST;
 426                 else if (strcmp(*CMD_ARGV, "srst_only") == 0)
 427                         tmp = RESET_HAS_SRST;
 428                 else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
 429                         tmp = RESET_HAS_TRST | RESET_HAS_SRST;
 430                 else
 431                         m = 0;
 432                 if (mask & m) {
 433                         LOG_ERROR("extra reset_config %s spec (%s)",
 434                                         "signal", *CMD_ARGV);
 435                         return ERROR_COMMAND_SYNTAX_ERROR;
 436                 }
 437                 if (m)
 438                         goto next;
 439
 440                 /* combination (options for broken wiring) */
 441                 m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 442                 if (strcmp(*CMD_ARGV, "separate") == 0)
 443                         /* separate reset lines - default */;
 444                 else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
 445                         tmp |= RESET_SRST_PULLS_TRST;
 446                 else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
 447                         tmp |= RESET_TRST_PULLS_SRST;
 448                 else if (strcmp(*CMD_ARGV, "combined") == 0)
 449                         tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 450                 else
 451                         m = 0;
 452                 if (mask & m) {
 453                         LOG_ERROR("extra reset_config %s spec (%s)",
 454                                         "combination", *CMD_ARGV);
 455                         return ERROR_COMMAND_SYNTAX_ERROR;
 456                 }
 457                 if (m)
 458                         goto next;
 459
 460                 /* trst_type (NOP without HAS_TRST) */
 461                 m = RESET_TRST_OPEN_DRAIN;
 462                 if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
 463                         tmp |= RESET_TRST_OPEN_DRAIN;
 464                 else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
 465                         /* push/pull from adapter - default */;
 466                 else
 467                         m = 0;
 468                 if (mask & m) {
 469                         LOG_ERROR("extra reset_config %s spec (%s)",
 470                                         "trst_type", *CMD_ARGV);
 471                         return ERROR_COMMAND_SYNTAX_ERROR;
 472                 }
 473                 if (m)
 474                         goto next;
 475
 476                 /* srst_type (NOP without HAS_SRST) */
 477                 m = RESET_SRST_PUSH_PULL;
 478                 if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
 479                         tmp |= RESET_SRST_PUSH_PULL;
 480                 else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
 481                         /* open drain from adapter - default */;
 482                 else
 483                         m = 0;
 484                 if (mask & m) {
 485                         LOG_ERROR("extra reset_config %s spec (%s)",
 486                                         "srst_type", *CMD_ARGV);
 487                         return ERROR_COMMAND_SYNTAX_ERROR;
 488                 }
 489                 if (m)
 490                         goto next;
 491
 492                 /* connect_type - only valid when srst_nogate */
 493                 m = RESET_CNCT_UNDER_SRST;
 494                 if (strcmp(*CMD_ARGV, "connect_assert_srst") == 0)
 495                         tmp |= RESET_CNCT_UNDER_SRST;
 496                 else if (strcmp(*CMD_ARGV, "connect_deassert_srst") == 0)
 497                         /* connect normally - default */;
 498                 else
 499                         m = 0;
 500                 if (mask & m) {
 501                         LOG_ERROR("extra reset_config %s spec (%s)",
 502                                         "connect_type", *CMD_ARGV);
 503                         return ERROR_COMMAND_SYNTAX_ERROR;
 504                 }
 505                 if (m)
 506                         goto next;
 507
 508                 /* caller provided nonsense; fail */
 509                 LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
 510                 return ERROR_COMMAND_SYNTAX_ERROR;
 511
 512 next:
 513                 /* Remember the bits which were specified (mask)
 514                  * and their new values (new_cfg).
 515                  */
 516                 mask |= m;
 517                 new_cfg |= tmp;
 518         }
 519
 520         /* clear previous values of those bits, save new values */
 521         if (mask) {
 522                 int old_cfg = jtag_get_reset_config();
 523
 524                 old_cfg &= ~mask;
 525                 new_cfg |= old_cfg;
 526                 jtag_set_reset_config(new_cfg);
 527         } else
 528                 new_cfg = jtag_get_reset_config();
 529
 530         /*
 531          * Display the (now-)current reset mode
 532          */
 533         char *modes[6];
 534
 535         /* minimal JTAG has neither SRST nor TRST (so that's the default) */
 536         switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
 537                 case RESET_HAS_SRST:
 538                         modes[0] = "srst_only";
 539                         break;
 540                 case RESET_HAS_TRST:
 541                         modes[0] = "trst_only";
 542                         break;
 543                 case RESET_TRST_AND_SRST:
 544                         modes[0] = "trst_and_srst";
 545                         break;
 546                 default:
 547                         modes[0] = "none";
 548                         break;
 549         }
 550
 551         /* normally SRST and TRST are decoupled; but bugs happen ... */
 552         switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
 553                 case RESET_SRST_PULLS_TRST:
 554                         modes[1] = "srst_pulls_trst";
 555                         break;
 556                 case RESET_TRST_PULLS_SRST:
 557                         modes[1] = "trst_pulls_srst";
 558                         break;
 559                 case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
 560                         modes[1] = "combined";
 561                         break;
 562                 default:
 563                         modes[1] = "separate";
 564                         break;
 565         }
 566
 567         /* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
 568         if (new_cfg & RESET_HAS_TRST) {
 569                 if (new_cfg & RESET_TRST_OPEN_DRAIN)
 570                         modes[3] = " trst_open_drain";
 571                 else
 572                         modes[3] = " trst_push_pull";
 573         } else
 574                 modes[3] = "";
 575
 576         /* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
 577         if (new_cfg & RESET_HAS_SRST) {
 578                 if (new_cfg & RESET_SRST_NO_GATING)
 579                         modes[2] = " srst_nogate";
 580                 else
 581                         modes[2] = " srst_gates_jtag";
 582
 583                 if (new_cfg & RESET_SRST_PUSH_PULL)
 584                         modes[4] = " srst_push_pull";
 585                 else
 586                         modes[4] = " srst_open_drain";
 587
 588                 if (new_cfg & RESET_CNCT_UNDER_SRST)
 589                         modes[5] = " connect_assert_srst";
 590                 else
 591                         modes[5] = " connect_deassert_srst";
 592         } else {
 593                 modes[2] = "";
 594                 modes[4] = "";
 595                 modes[5] = "";
 596         }
 597
 598         command_print(CMD, "%s %s%s%s%s%s",
 599                         modes[0], modes[1],
 600                         modes[2], modes[3], modes[4], modes[5]);
 601
 602         return ERROR_OK;
 603 }
 604
 605 COMMAND_HANDLER(handle_adapter_srst_delay_command)
 606 {
 607         if (CMD_ARGC > 1)
 608                 return ERROR_COMMAND_SYNTAX_ERROR;
 609         if (CMD_ARGC == 1) {
 610                 unsigned delay;
 611                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
 612
 613                 jtag_set_nsrst_delay(delay);
 614         }
 615         command_print(CMD, "adapter srst delay: %u", jtag_get_nsrst_delay());
 616         return ERROR_OK;
 617 }
 618
 619 COMMAND_HANDLER(handle_adapter_srst_pulse_width_command)
 620 {
 621         if (CMD_ARGC > 1)
 622                 return ERROR_COMMAND_SYNTAX_ERROR;
 623         if (CMD_ARGC == 1) {
 624                 unsigned width;
 625                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], width);
 626
 627                 jtag_set_nsrst_assert_width(width);
 628         }
 629         command_print(CMD, "adapter srst pulse_width: %u", jtag_get_nsrst_assert_width());
 630         return ERROR_OK;
 631 }
 632
 633 COMMAND_HANDLER(handle_adapter_speed_command)
 634 {
 635         if (CMD_ARGC > 1)
 636                 return ERROR_COMMAND_SYNTAX_ERROR;
 637
 638         int retval = ERROR_OK;
 639         if (CMD_ARGC == 1) {
 640                 unsigned khz = 0;
 641                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
 642
 643                 retval = adapter_config_khz(khz);
 644                 if (retval != ERROR_OK)
 645                         return retval;
 646         }
 647
 648         int cur_speed = adapter_get_speed_khz();
 649         retval = adapter_get_speed_readable(&cur_speed);
 650         if (retval != ERROR_OK)
 651                 return retval;
 652
 653         if (cur_speed)
 654                 command_print(CMD, "adapter speed: %d kHz", cur_speed);
 655         else
 656                 command_print(CMD, "adapter speed: RCLK - adaptive");
 657
 658         return retval;
 659 }
 660
 661 COMMAND_HANDLER(handle_adapter_reset_de_assert)
 662 {
 663         enum values {
 664                 VALUE_UNDEFINED = -1,
 665                 VALUE_DEASSERT  = 0,
 666                 VALUE_ASSERT    = 1,
 667         };
 668         enum values value;
 669         enum values srst = VALUE_UNDEFINED;
 670         enum values trst = VALUE_UNDEFINED;
 671         enum reset_types jtag_reset_config = jtag_get_reset_config();
 672         char *signal;
 673
 674         if (CMD_ARGC == 0) {
 675                 if (transport_is_jtag()) {
 676                         if (jtag_reset_config & RESET_HAS_TRST)
 677                                 signal = jtag_get_trst() ? "asserted" : "deasserted";
 678                         else
 679                                 signal = "not present";
 680                         command_print(CMD, "trst %s", signal);
 681                 }
 682
 683                 if (jtag_reset_config & RESET_HAS_SRST)
 684                         signal = jtag_get_srst() ? "asserted" : "deasserted";
 685                 else
 686                         signal = "not present";
 687                 command_print(CMD, "srst %s", signal);
 688
 689                 return ERROR_OK;
 690         }
 691
 692         if (CMD_ARGC != 1 && CMD_ARGC != 3)
 693                 return ERROR_COMMAND_SYNTAX_ERROR;
 694
 695         value = (strcmp(CMD_NAME, "assert") == 0) ? VALUE_ASSERT : VALUE_DEASSERT;
 696         if (strcmp(CMD_ARGV[0], "srst") == 0)
 697                 srst = value;
 698         else if (strcmp(CMD_ARGV[0], "trst") == 0)
 699                 trst = value;
 700         else
 701                 return ERROR_COMMAND_SYNTAX_ERROR;
 702
 703         if (CMD_ARGC == 3) {
 704                 if (strcmp(CMD_ARGV[1], "assert") == 0)
 705                         value = VALUE_ASSERT;
 706                 else if (strcmp(CMD_ARGV[1], "deassert") == 0)
 707                         value = VALUE_DEASSERT;
 708                 else
 709                         return ERROR_COMMAND_SYNTAX_ERROR;
 710
 711                 if (strcmp(CMD_ARGV[2], "srst") == 0 && srst == VALUE_UNDEFINED)
 712                         srst = value;
 713                 else if (strcmp(CMD_ARGV[2], "trst") == 0 && trst == VALUE_UNDEFINED)
 714                         trst = value;
 715                 else
 716                         return ERROR_COMMAND_SYNTAX_ERROR;
 717         }
 718
 719         if (trst == VALUE_UNDEFINED) {
 720                 if (transport_is_jtag())
 721                         trst = jtag_get_trst() ? VALUE_ASSERT : VALUE_DEASSERT;
 722                 else
 723                         trst = VALUE_DEASSERT; /* unused, safe value */
 724         }
 725
 726         if (srst == VALUE_UNDEFINED) {
 727                 if (jtag_reset_config & RESET_HAS_SRST)
 728                         srst = jtag_get_srst() ? VALUE_ASSERT : VALUE_DEASSERT;
 729                 else
 730                         srst = VALUE_DEASSERT; /* unused, safe value */
 731         }
 732
 733         if (trst == VALUE_ASSERT && !transport_is_jtag()) {
 734                 LOG_ERROR("transport has no trst signal");
 735                 return ERROR_FAIL;
 736         }
 737
 738         if (srst == VALUE_ASSERT && !(jtag_reset_config & RESET_HAS_SRST)) {
 739                 LOG_ERROR("adapter has no srst signal");
 740                 return ERROR_FAIL;
 741         }
 742
 743         return adapter_resets((trst == VALUE_DEASSERT) ? TRST_DEASSERT : TRST_ASSERT,
 744                                                   (srst == VALUE_DEASSERT) ? SRST_DEASSERT : SRST_ASSERT);
 745 }
 746
 747 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 748 COMMAND_HANDLER(handle_usb_location_command)
 749 {
 750         if (CMD_ARGC == 1)
 751                 adapter_usb_set_location(CMD_ARGV[0]);
 752
 753         command_print(CMD, "adapter usb location: %s", adapter_usb_get_location());
 754
 755         return ERROR_OK;
 756 }
 757 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 758
 759 static const struct command_registration adapter_usb_command_handlers[] = {
 760 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 761         {
 762                 .name = "location",
 763                 .handler = &handle_usb_location_command,
 764                 .mode = COMMAND_CONFIG,
 765                 .help = "display or set the USB bus location of the USB device",
 766                 .usage = "[<bus>-port[.port]...]",
 767         },
 768 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 769         COMMAND_REGISTRATION_DONE
 770 };
 771
 772 static const struct command_registration adapter_srst_command_handlers[] = {
 773         {
 774                 .name = "delay",
 775                 .handler = handle_adapter_srst_delay_command,
 776                 .mode = COMMAND_ANY,
 777                 .help = "delay after deasserting SRST in ms",
 778                 .usage = "[milliseconds]",
 779         },
 780         {
 781                 .name = "pulse_width",
 782                 .handler = handle_adapter_srst_pulse_width_command,
 783                 .mode = COMMAND_ANY,
 784                 .help = "SRST assertion pulse width in ms",
 785                 .usage = "[milliseconds]",
 786         },
 787         COMMAND_REGISTRATION_DONE
 788 };
 789
 790 static const struct command_registration adapter_command_handlers[] = {
 791         {
 792                 .name = "driver",
 793                 .handler = handle_adapter_driver_command,
 794                 .mode = COMMAND_CONFIG,
 795                 .help = "Select a debug adapter driver",
 796                 .usage = "driver_name",
 797         },
 798         {
 799                 .name = "speed",
 800                 .handler = handle_adapter_speed_command,
 801                 .mode = COMMAND_ANY,
 802                 .help = "With an argument, change to the specified maximum "
 803                         "jtag speed.  For JTAG, 0 KHz signifies adaptive "
 804                         "clocking. "
 805                         "With or without argument, display current setting.",
 806                 .usage = "[khz]",
 807         },
 808         {
 809                 .name = "list",
 810                 .handler = handle_adapter_list_command,
 811                 .mode = COMMAND_ANY,
 812                 .help = "List all built-in debug adapter drivers",
 813                 .usage = "",
 814         },
 815         {
 816                 .name = "name",
 817                 .mode = COMMAND_ANY,
 818                 .jim_handler = jim_adapter_name,
 819                 .help = "Returns the name of the currently "
 820                         "selected adapter (driver)",
 821         },
 822         {
 823                 .name = "srst",
 824                 .mode = COMMAND_ANY,
 825                 .help = "srst adapter command group",
 826                 .usage = "",
 827                 .chain = adapter_srst_command_handlers,
 828         },
 829         {
 830                 .name = "transports",
 831                 .handler = adapter_transports_command,
 832                 .mode = COMMAND_CONFIG,
 833                 .help = "Declare transports the adapter supports.",
 834                 .usage = "transport ...",
 835         },
 836         {
 837                 .name = "usb",
 838                 .mode = COMMAND_ANY,
 839                 .help = "usb adapter command group",
 840                 .usage = "",
 841                 .chain = adapter_usb_command_handlers,
 842         },
 843         {
 844                 .name = "assert",
 845                 .handler = handle_adapter_reset_de_assert,
 846                 .mode = COMMAND_EXEC,
 847                 .help = "Controls SRST and TRST lines.",
 848                 .usage = "|deassert [srst|trst [assert|deassert srst|trst]]",
 849         },
 850         {
 851                 .name = "deassert",
 852                 .handler = handle_adapter_reset_de_assert,
 853                 .mode = COMMAND_EXEC,
 854                 .help = "Controls SRST and TRST lines.",
 855                 .usage = "|assert [srst|trst [deassert|assert srst|trst]]",
 856         },
 857         COMMAND_REGISTRATION_DONE
 858 };
 859
 860 static const struct command_registration interface_command_handlers[] = {
 861         {
 862                 .name = "adapter",
 863                 .mode = COMMAND_ANY,
 864                 .help = "adapter command group",
 865                 .usage = "",
 866                 .chain = adapter_command_handlers,
 867         },
 868         {
 869                 .name = "reset_config",
 870                 .handler = handle_reset_config_command,
 871                 .mode = COMMAND_ANY,
 872                 .help = "configure adapter reset behavior",
 873                 .usage = "[none|trst_only|srst_only|trst_and_srst] "
 874                         "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
 875                         "[srst_gates_jtag|srst_nogate] "
 876                         "[trst_push_pull|trst_open_drain] "
 877                         "[srst_push_pull|srst_open_drain] "
 878                         "[connect_deassert_srst|connect_assert_srst]",
 879         },
 880         COMMAND_REGISTRATION_DONE
 881 };
 882
 883 /**
 884  * Register the commands which deal with arbitrary debug adapter drivers.
 885  *
 886  * @todo Remove internal assumptions that all debug adapters use JTAG for
 887  * transport.  Various types and data structures are not named generically.
 888  */
 889 int interface_register_commands(struct command_context *ctx)
 890 {
 891         return register_commands(ctx, NULL, interface_command_handlers);
 892 }