git.gag.com Git - fw/openocd/blob - src/jtag/adapter.c

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de>
   4  * Copyright (C) 2007-2010 Øyvind Harboe <oyvind.harboe@zylin.com>
   5  * Copyright (C) 2009 SoftPLC Corporation, http://softplc.com, Dick Hollenbeck <dick@softplc.com>
   6  * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net>
   7  * Copyright (C) 2018 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
   8  */
   9
  10 #ifdef HAVE_CONFIG_H
  11 #include "config.h"
  12 #endif
  13
  14 #include "adapter.h"
  15 #include "jtag.h"
  16 #include "minidriver.h"
  17 #include "interface.h"
  18 #include "interfaces.h"
  19 #include <transport/transport.h>
  20
  21 #ifdef HAVE_STRINGS_H
  22 #include <strings.h>
  23 #endif
  24
  25 /**
  26  * @file
  27  * Holds support for configuring debug adapters from TCl scripts.
  28  */
  29
  30 struct adapter_driver *adapter_driver;
  31 const char * const jtag_only[] = { "jtag", NULL };
  32
  33 /**
  34  * Adapter configuration
  35  */
  36 static struct {
  37         char *usb_location;
  38 } adapter_config;
  39
  40 /*
  41  * 1 char: bus
  42  * 2 * 7 chars: max 7 ports
  43  * 1 char: test for overflow
  44  * ------
  45  * 16 chars
  46  */
  47 #define USB_MAX_LOCATION_LENGTH         16
  48
  49 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
  50 static void adapter_usb_set_location(const char *location)
  51 {
  52         if (strnlen(location, USB_MAX_LOCATION_LENGTH) == USB_MAX_LOCATION_LENGTH)
  53                 LOG_WARNING("usb location string is too long!!");
  54
  55         free(adapter_config.usb_location);
  56
  57         adapter_config.usb_location = strndup(location, USB_MAX_LOCATION_LENGTH);
  58 }
  59 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
  60
  61 const char *adapter_usb_get_location(void)
  62 {
  63         return adapter_config.usb_location;
  64 }
  65
  66 bool adapter_usb_location_equal(uint8_t dev_bus, uint8_t *port_path, size_t path_len)
  67 {
  68         size_t path_step, string_length;
  69         char *ptr, *loc;
  70         bool equal = false;
  71
  72         if (!adapter_usb_get_location())
  73                 return equal;
  74
  75         /* strtok need non const char */
  76         loc = strndup(adapter_usb_get_location(), USB_MAX_LOCATION_LENGTH);
  77         string_length = strnlen(loc, USB_MAX_LOCATION_LENGTH);
  78
  79         ptr = strtok(loc, "-");
  80         if (!ptr) {
  81                 LOG_WARNING("no '-' in usb path\n");
  82                 goto done;
  83         }
  84
  85         string_length -= strnlen(ptr, string_length);
  86         /* check bus mismatch */
  87         if (atoi(ptr) != dev_bus)
  88                 goto done;
  89
  90         path_step = 0;
  91         while (path_step < path_len) {
  92                 ptr = strtok(NULL, ".");
  93
  94                 /* no more tokens in path */
  95                 if (!ptr)
  96                         break;
  97
  98                 /* path mismatch at some step */
  99                 if (path_step < path_len && atoi(ptr) != port_path[path_step])
 100                         break;
 101
 102                 path_step++;
 103                 string_length -= strnlen(ptr, string_length) + 1;
 104         };
 105
 106         /* walked the full path, all elements match */
 107         if (path_step == path_len && !string_length)
 108                 equal = true;
 109
 110 done:
 111         free(loc);
 112         return equal;
 113 }
 114
 115 static int jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
 116 {
 117         struct jim_getopt_info goi;
 118         jim_getopt_setup(&goi, interp, argc-1, argv + 1);
 119
 120         /* return the name of the interface */
 121         /* TCL code might need to know the exact type... */
 122         /* FUTURE: we allow this as a means to "set" the interface. */
 123         if (goi.argc != 0) {
 124                 Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
 125                 return JIM_ERR;
 126         }
 127         const char *name = adapter_driver ? adapter_driver->name : NULL;
 128         Jim_SetResultString(goi.interp, name ? name : "undefined", -1);
 129         return JIM_OK;
 130 }
 131
 132 COMMAND_HANDLER(adapter_transports_command)
 133 {
 134         char **transports;
 135         int retval;
 136
 137         retval = CALL_COMMAND_HANDLER(transport_list_parse, &transports);
 138         if (retval != ERROR_OK)
 139                 return retval;
 140
 141         retval = allow_transports(CMD_CTX, (const char **)transports);
 142
 143         if (retval != ERROR_OK) {
 144                 for (unsigned i = 0; transports[i]; i++)
 145                         free(transports[i]);
 146                 free(transports);
 147         }
 148         return retval;
 149 }
 150
 151 COMMAND_HANDLER(handle_adapter_list_command)
 152 {
 153         if (strcmp(CMD_NAME, "list") == 0 && CMD_ARGC > 0)
 154                 return ERROR_COMMAND_SYNTAX_ERROR;
 155
 156         command_print(CMD, "The following debug adapters are available:");
 157         for (unsigned i = 0; adapter_drivers[i]; i++) {
 158                 const char *name = adapter_drivers[i]->name;
 159                 command_print(CMD, "%u: %s", i + 1, name);
 160         }
 161
 162         return ERROR_OK;
 163 }
 164
 165 COMMAND_HANDLER(handle_adapter_driver_command)
 166 {
 167         int retval;
 168
 169         /* check whether the interface is already configured */
 170         if (adapter_driver) {
 171                 LOG_WARNING("Interface already configured, ignoring");
 172                 return ERROR_OK;
 173         }
 174
 175         /* interface name is a mandatory argument */
 176         if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
 177                 return ERROR_COMMAND_SYNTAX_ERROR;
 178
 179         for (unsigned i = 0; adapter_drivers[i]; i++) {
 180                 if (strcmp(CMD_ARGV[0], adapter_drivers[i]->name) != 0)
 181                         continue;
 182
 183                 if (adapter_drivers[i]->commands) {
 184                         retval = register_commands(CMD_CTX, NULL,
 185                                         adapter_drivers[i]->commands);
 186                         if (retval != ERROR_OK)
 187                                 return retval;
 188                 }
 189
 190                 adapter_driver = adapter_drivers[i];
 191
 192                 return allow_transports(CMD_CTX, adapter_driver->transports);
 193         }
 194
 195         /* no valid interface was found (i.e. the configuration option,
 196          * didn't match one of the compiled-in interfaces
 197          */
 198         LOG_ERROR("The specified debug interface was not found (%s)",
 199                                 CMD_ARGV[0]);
 200         CALL_COMMAND_HANDLER(handle_adapter_list_command);
 201         return ERROR_JTAG_INVALID_INTERFACE;
 202 }
 203
 204 COMMAND_HANDLER(handle_reset_config_command)
 205 {
 206         int new_cfg = 0;
 207         int mask = 0;
 208
 209         /* Original versions cared about the order of these tokens:
 210          *   reset_config signals [combination [trst_type [srst_type]]]
 211          * They also clobbered the previous configuration even on error.
 212          *
 213          * Here we don't care about the order, and only change values
 214          * which have been explicitly specified.
 215          */
 216         for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
 217                 int tmp = 0;
 218                 int m;
 219
 220                 /* gating */
 221                 m = RESET_SRST_NO_GATING;
 222                 if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
 223                         /* default: don't use JTAG while SRST asserted */;
 224                 else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
 225                         tmp = RESET_SRST_NO_GATING;
 226                 else
 227                         m = 0;
 228                 if (mask & m) {
 229                         LOG_ERROR("extra reset_config %s spec (%s)",
 230                                         "gating", *CMD_ARGV);
 231                         return ERROR_COMMAND_SYNTAX_ERROR;
 232                 }
 233                 if (m)
 234                         goto next;
 235
 236                 /* signals */
 237                 m = RESET_HAS_TRST | RESET_HAS_SRST;
 238                 if (strcmp(*CMD_ARGV, "none") == 0)
 239                         tmp = RESET_NONE;
 240                 else if (strcmp(*CMD_ARGV, "trst_only") == 0)
 241                         tmp = RESET_HAS_TRST;
 242                 else if (strcmp(*CMD_ARGV, "srst_only") == 0)
 243                         tmp = RESET_HAS_SRST;
 244                 else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
 245                         tmp = RESET_HAS_TRST | RESET_HAS_SRST;
 246                 else
 247                         m = 0;
 248                 if (mask & m) {
 249                         LOG_ERROR("extra reset_config %s spec (%s)",
 250                                         "signal", *CMD_ARGV);
 251                         return ERROR_COMMAND_SYNTAX_ERROR;
 252                 }
 253                 if (m)
 254                         goto next;
 255
 256                 /* combination (options for broken wiring) */
 257                 m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 258                 if (strcmp(*CMD_ARGV, "separate") == 0)
 259                         /* separate reset lines - default */;
 260                 else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
 261                         tmp |= RESET_SRST_PULLS_TRST;
 262                 else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
 263                         tmp |= RESET_TRST_PULLS_SRST;
 264                 else if (strcmp(*CMD_ARGV, "combined") == 0)
 265                         tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 266                 else
 267                         m = 0;
 268                 if (mask & m) {
 269                         LOG_ERROR("extra reset_config %s spec (%s)",
 270                                         "combination", *CMD_ARGV);
 271                         return ERROR_COMMAND_SYNTAX_ERROR;
 272                 }
 273                 if (m)
 274                         goto next;
 275
 276                 /* trst_type (NOP without HAS_TRST) */
 277                 m = RESET_TRST_OPEN_DRAIN;
 278                 if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
 279                         tmp |= RESET_TRST_OPEN_DRAIN;
 280                 else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
 281                         /* push/pull from adapter - default */;
 282                 else
 283                         m = 0;
 284                 if (mask & m) {
 285                         LOG_ERROR("extra reset_config %s spec (%s)",
 286                                         "trst_type", *CMD_ARGV);
 287                         return ERROR_COMMAND_SYNTAX_ERROR;
 288                 }
 289                 if (m)
 290                         goto next;
 291
 292                 /* srst_type (NOP without HAS_SRST) */
 293                 m = RESET_SRST_PUSH_PULL;
 294                 if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
 295                         tmp |= RESET_SRST_PUSH_PULL;
 296                 else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
 297                         /* open drain from adapter - default */;
 298                 else
 299                         m = 0;
 300                 if (mask & m) {
 301                         LOG_ERROR("extra reset_config %s spec (%s)",
 302                                         "srst_type", *CMD_ARGV);
 303                         return ERROR_COMMAND_SYNTAX_ERROR;
 304                 }
 305                 if (m)
 306                         goto next;
 307
 308                 /* connect_type - only valid when srst_nogate */
 309                 m = RESET_CNCT_UNDER_SRST;
 310                 if (strcmp(*CMD_ARGV, "connect_assert_srst") == 0)
 311                         tmp |= RESET_CNCT_UNDER_SRST;
 312                 else if (strcmp(*CMD_ARGV, "connect_deassert_srst") == 0)
 313                         /* connect normally - default */;
 314                 else
 315                         m = 0;
 316                 if (mask & m) {
 317                         LOG_ERROR("extra reset_config %s spec (%s)",
 318                                         "connect_type", *CMD_ARGV);
 319                         return ERROR_COMMAND_SYNTAX_ERROR;
 320                 }
 321                 if (m)
 322                         goto next;
 323
 324                 /* caller provided nonsense; fail */
 325                 LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
 326                 return ERROR_COMMAND_SYNTAX_ERROR;
 327
 328 next:
 329                 /* Remember the bits which were specified (mask)
 330                  * and their new values (new_cfg).
 331                  */
 332                 mask |= m;
 333                 new_cfg |= tmp;
 334         }
 335
 336         /* clear previous values of those bits, save new values */
 337         if (mask) {
 338                 int old_cfg = jtag_get_reset_config();
 339
 340                 old_cfg &= ~mask;
 341                 new_cfg |= old_cfg;
 342                 jtag_set_reset_config(new_cfg);
 343         } else
 344                 new_cfg = jtag_get_reset_config();
 345
 346         /*
 347          * Display the (now-)current reset mode
 348          */
 349         char *modes[6];
 350
 351         /* minimal JTAG has neither SRST nor TRST (so that's the default) */
 352         switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
 353                 case RESET_HAS_SRST:
 354                         modes[0] = "srst_only";
 355                         break;
 356                 case RESET_HAS_TRST:
 357                         modes[0] = "trst_only";
 358                         break;
 359                 case RESET_TRST_AND_SRST:
 360                         modes[0] = "trst_and_srst";
 361                         break;
 362                 default:
 363                         modes[0] = "none";
 364                         break;
 365         }
 366
 367         /* normally SRST and TRST are decoupled; but bugs happen ... */
 368         switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
 369                 case RESET_SRST_PULLS_TRST:
 370                         modes[1] = "srst_pulls_trst";
 371                         break;
 372                 case RESET_TRST_PULLS_SRST:
 373                         modes[1] = "trst_pulls_srst";
 374                         break;
 375                 case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
 376                         modes[1] = "combined";
 377                         break;
 378                 default:
 379                         modes[1] = "separate";
 380                         break;
 381         }
 382
 383         /* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
 384         if (new_cfg & RESET_HAS_TRST) {
 385                 if (new_cfg & RESET_TRST_OPEN_DRAIN)
 386                         modes[3] = " trst_open_drain";
 387                 else
 388                         modes[3] = " trst_push_pull";
 389         } else
 390                 modes[3] = "";
 391
 392         /* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
 393         if (new_cfg & RESET_HAS_SRST) {
 394                 if (new_cfg & RESET_SRST_NO_GATING)
 395                         modes[2] = " srst_nogate";
 396                 else
 397                         modes[2] = " srst_gates_jtag";
 398
 399                 if (new_cfg & RESET_SRST_PUSH_PULL)
 400                         modes[4] = " srst_push_pull";
 401                 else
 402                         modes[4] = " srst_open_drain";
 403
 404                 if (new_cfg & RESET_CNCT_UNDER_SRST)
 405                         modes[5] = " connect_assert_srst";
 406                 else
 407                         modes[5] = " connect_deassert_srst";
 408         } else {
 409                 modes[2] = "";
 410                 modes[4] = "";
 411                 modes[5] = "";
 412         }
 413
 414         command_print(CMD, "%s %s%s%s%s%s",
 415                         modes[0], modes[1],
 416                         modes[2], modes[3], modes[4], modes[5]);
 417
 418         return ERROR_OK;
 419 }
 420
 421 COMMAND_HANDLER(handle_adapter_srst_delay_command)
 422 {
 423         if (CMD_ARGC > 1)
 424                 return ERROR_COMMAND_SYNTAX_ERROR;
 425         if (CMD_ARGC == 1) {
 426                 unsigned delay;
 427                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
 428
 429                 jtag_set_nsrst_delay(delay);
 430         }
 431         command_print(CMD, "adapter srst delay: %u", jtag_get_nsrst_delay());
 432         return ERROR_OK;
 433 }
 434
 435 COMMAND_HANDLER(handle_adapter_srst_pulse_width_command)
 436 {
 437         if (CMD_ARGC > 1)
 438                 return ERROR_COMMAND_SYNTAX_ERROR;
 439         if (CMD_ARGC == 1) {
 440                 unsigned width;
 441                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], width);
 442
 443                 jtag_set_nsrst_assert_width(width);
 444         }
 445         command_print(CMD, "adapter srst pulse_width: %u", jtag_get_nsrst_assert_width());
 446         return ERROR_OK;
 447 }
 448
 449 COMMAND_HANDLER(handle_adapter_speed_command)
 450 {
 451         if (CMD_ARGC > 1)
 452                 return ERROR_COMMAND_SYNTAX_ERROR;
 453
 454         int retval = ERROR_OK;
 455         if (CMD_ARGC == 1) {
 456                 unsigned khz = 0;
 457                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
 458
 459                 retval = jtag_config_khz(khz);
 460                 if (retval != ERROR_OK)
 461                         return retval;
 462         }
 463
 464         int cur_speed = jtag_get_speed_khz();
 465         retval = jtag_get_speed_readable(&cur_speed);
 466         if (retval != ERROR_OK)
 467                 return retval;
 468
 469         if (cur_speed)
 470                 command_print(CMD, "adapter speed: %d kHz", cur_speed);
 471         else
 472                 command_print(CMD, "adapter speed: RCLK - adaptive");
 473
 474         return retval;
 475 }
 476
 477 COMMAND_HANDLER(handle_adapter_reset_de_assert)
 478 {
 479         enum values {
 480                 VALUE_UNDEFINED = -1,
 481                 VALUE_DEASSERT  = 0,
 482                 VALUE_ASSERT    = 1,
 483         };
 484         enum values value;
 485         enum values srst = VALUE_UNDEFINED;
 486         enum values trst = VALUE_UNDEFINED;
 487         enum reset_types jtag_reset_config = jtag_get_reset_config();
 488         char *signal;
 489
 490         if (CMD_ARGC == 0) {
 491                 if (transport_is_jtag()) {
 492                         if (jtag_reset_config & RESET_HAS_TRST)
 493                                 signal = jtag_get_trst() ? "asserted" : "deasserted";
 494                         else
 495                                 signal = "not present";
 496                         command_print(CMD, "trst %s", signal);
 497                 }
 498
 499                 if (jtag_reset_config & RESET_HAS_SRST)
 500                         signal = jtag_get_srst() ? "asserted" : "deasserted";
 501                 else
 502                         signal = "not present";
 503                 command_print(CMD, "srst %s", signal);
 504
 505                 return ERROR_OK;
 506         }
 507
 508         if (CMD_ARGC != 1 && CMD_ARGC != 3)
 509                 return ERROR_COMMAND_SYNTAX_ERROR;
 510
 511         value = (strcmp(CMD_NAME, "assert") == 0) ? VALUE_ASSERT : VALUE_DEASSERT;
 512         if (strcmp(CMD_ARGV[0], "srst") == 0)
 513                 srst = value;
 514         else if (strcmp(CMD_ARGV[0], "trst") == 0)
 515                 trst = value;
 516         else
 517                 return ERROR_COMMAND_SYNTAX_ERROR;
 518
 519         if (CMD_ARGC == 3) {
 520                 if (strcmp(CMD_ARGV[1], "assert") == 0)
 521                         value = VALUE_ASSERT;
 522                 else if (strcmp(CMD_ARGV[1], "deassert") == 0)
 523                         value = VALUE_DEASSERT;
 524                 else
 525                         return ERROR_COMMAND_SYNTAX_ERROR;
 526
 527                 if (strcmp(CMD_ARGV[2], "srst") == 0 && srst == VALUE_UNDEFINED)
 528                         srst = value;
 529                 else if (strcmp(CMD_ARGV[2], "trst") == 0 && trst == VALUE_UNDEFINED)
 530                         trst = value;
 531                 else
 532                         return ERROR_COMMAND_SYNTAX_ERROR;
 533         }
 534
 535         if (trst == VALUE_UNDEFINED) {
 536                 if (transport_is_jtag())
 537                         trst = jtag_get_trst() ? VALUE_ASSERT : VALUE_DEASSERT;
 538                 else
 539                         trst = VALUE_DEASSERT; /* unused, safe value */
 540         }
 541
 542         if (srst == VALUE_UNDEFINED) {
 543                 if (jtag_reset_config & RESET_HAS_SRST)
 544                         srst = jtag_get_srst() ? VALUE_ASSERT : VALUE_DEASSERT;
 545                 else
 546                         srst = VALUE_DEASSERT; /* unused, safe value */
 547         }
 548
 549         if (trst == VALUE_ASSERT && !transport_is_jtag()) {
 550                 LOG_ERROR("transport has no trst signal");
 551                 return ERROR_FAIL;
 552         }
 553
 554         if (srst == VALUE_ASSERT && !(jtag_reset_config & RESET_HAS_SRST)) {
 555                 LOG_ERROR("adapter has no srst signal");
 556                 return ERROR_FAIL;
 557         }
 558
 559         return adapter_resets((trst == VALUE_DEASSERT) ? TRST_DEASSERT : TRST_ASSERT,
 560                                                   (srst == VALUE_DEASSERT) ? SRST_DEASSERT : SRST_ASSERT);
 561 }
 562
 563 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 564 COMMAND_HANDLER(handle_usb_location_command)
 565 {
 566         if (CMD_ARGC == 1)
 567                 adapter_usb_set_location(CMD_ARGV[0]);
 568
 569         command_print(CMD, "adapter usb location: %s", adapter_usb_get_location());
 570
 571         return ERROR_OK;
 572 }
 573 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 574
 575 static const struct command_registration adapter_usb_command_handlers[] = {
 576 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 577         {
 578                 .name = "location",
 579                 .handler = &handle_usb_location_command,
 580                 .mode = COMMAND_CONFIG,
 581                 .help = "display or set the USB bus location of the USB device",
 582                 .usage = "[<bus>-port[.port]...]",
 583         },
 584 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 585         COMMAND_REGISTRATION_DONE
 586 };
 587
 588 static const struct command_registration adapter_srst_command_handlers[] = {
 589         {
 590                 .name = "delay",
 591                 .handler = handle_adapter_srst_delay_command,
 592                 .mode = COMMAND_ANY,
 593                 .help = "delay after deasserting SRST in ms",
 594                 .usage = "[milliseconds]",
 595         },
 596         {
 597                 .name = "pulse_width",
 598                 .handler = handle_adapter_srst_pulse_width_command,
 599                 .mode = COMMAND_ANY,
 600                 .help = "SRST assertion pulse width in ms",
 601                 .usage = "[milliseconds]",
 602         },
 603         COMMAND_REGISTRATION_DONE
 604 };
 605
 606 static const struct command_registration adapter_command_handlers[] = {
 607         {
 608                 .name = "driver",
 609                 .handler = handle_adapter_driver_command,
 610                 .mode = COMMAND_CONFIG,
 611                 .help = "Select a debug adapter driver",
 612                 .usage = "driver_name",
 613         },
 614         {
 615                 .name = "speed",
 616                 .handler = handle_adapter_speed_command,
 617                 .mode = COMMAND_ANY,
 618                 .help = "With an argument, change to the specified maximum "
 619                         "jtag speed.  For JTAG, 0 KHz signifies adaptive "
 620                         "clocking. "
 621                         "With or without argument, display current setting.",
 622                 .usage = "[khz]",
 623         },
 624         {
 625                 .name = "list",
 626                 .handler = handle_adapter_list_command,
 627                 .mode = COMMAND_ANY,
 628                 .help = "List all built-in debug adapter drivers",
 629                 .usage = "",
 630         },
 631         {
 632                 .name = "name",
 633                 .mode = COMMAND_ANY,
 634                 .jim_handler = jim_adapter_name,
 635                 .help = "Returns the name of the currently "
 636                         "selected adapter (driver)",
 637         },
 638         {
 639                 .name = "srst",
 640                 .mode = COMMAND_ANY,
 641                 .help = "srst adapter command group",
 642                 .usage = "",
 643                 .chain = adapter_srst_command_handlers,
 644         },
 645         {
 646                 .name = "transports",
 647                 .handler = adapter_transports_command,
 648                 .mode = COMMAND_CONFIG,
 649                 .help = "Declare transports the adapter supports.",
 650                 .usage = "transport ...",
 651         },
 652         {
 653                 .name = "usb",
 654                 .mode = COMMAND_ANY,
 655                 .help = "usb adapter command group",
 656                 .usage = "",
 657                 .chain = adapter_usb_command_handlers,
 658         },
 659         {
 660                 .name = "assert",
 661                 .handler = handle_adapter_reset_de_assert,
 662                 .mode = COMMAND_EXEC,
 663                 .help = "Controls SRST and TRST lines.",
 664                 .usage = "|deassert [srst|trst [assert|deassert srst|trst]]",
 665         },
 666         {
 667                 .name = "deassert",
 668                 .handler = handle_adapter_reset_de_assert,
 669                 .mode = COMMAND_EXEC,
 670                 .help = "Controls SRST and TRST lines.",
 671                 .usage = "|assert [srst|trst [deassert|assert srst|trst]]",
 672         },
 673         COMMAND_REGISTRATION_DONE
 674 };
 675
 676 static const struct command_registration interface_command_handlers[] = {
 677         {
 678                 .name = "adapter",
 679                 .mode = COMMAND_ANY,
 680                 .help = "adapter command group",
 681                 .usage = "",
 682                 .chain = adapter_command_handlers,
 683         },
 684         {
 685                 .name = "reset_config",
 686                 .handler = handle_reset_config_command,
 687                 .mode = COMMAND_ANY,
 688                 .help = "configure adapter reset behavior",
 689                 .usage = "[none|trst_only|srst_only|trst_and_srst] "
 690                         "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
 691                         "[srst_gates_jtag|srst_nogate] "
 692                         "[trst_push_pull|trst_open_drain] "
 693                         "[srst_push_pull|srst_open_drain] "
 694                         "[connect_deassert_srst|connect_assert_srst]",
 695         },
 696         COMMAND_REGISTRATION_DONE
 697 };
 698
 699 /**
 700  * Register the commands which deal with arbitrary debug adapter drivers.
 701  *
 702  * @todo Remove internal assumptions that all debug adapters use JTAG for
 703  * transport.  Various types and data structures are not named generically.
 704  */
 705 int interface_register_commands(struct command_context *ctx)
 706 {
 707         return register_commands(ctx, NULL, interface_command_handlers);
 708 }