git.gag.com Git - fw/openocd/blob - src/jtag/adapter.c

   1 /***************************************************************************
   2  *   Copyright (C) 2005 by Dominic Rath                                    *
   3  *   Dominic.Rath@gmx.de                                                   *
   4  *                                                                         *
   5  *   Copyright (C) 2007-2010 Øyvind Harboe                                 *
   6  *   oyvind.harboe@zylin.com                                               *
   7  *                                                                         *
   8  *   Copyright (C) 2009 SoftPLC Corporation                                *
   9  *       http://softplc.com                                                *
  10  *   dick@softplc.com                                                      *
  11  *                                                                         *
  12  *   Copyright (C) 2009 Zachary T Welch                                    *
  13  *   zw@superlucidity.net                                                  *
  14  *                                                                         *
  15  *   This program is free software; you can redistribute it and/or modify  *
  16  *   it under the terms of the GNU General Public License as published by  *
  17  *   the Free Software Foundation; either version 2 of the License, or     *
  18  *   (at your option) any later version.                                   *
  19  *                                                                         *
  20  *   This program is distributed in the hope that it will be useful,       *
  21  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  22  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  23  *   GNU General Public License for more details.                          *
  24  *                                                                         *
  25  *   You should have received a copy of the GNU General Public License     *
  26  *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  27  ***************************************************************************/
  28
  29 #ifdef HAVE_CONFIG_H
  30 #include "config.h"
  31 #endif
  32
  33 #include "jtag.h"
  34 #include "minidriver.h"
  35 #include "interface.h"
  36 #include "interfaces.h"
  37 #include <transport/transport.h>
  38 #include <jtag/drivers/jtag_usb_common.h>
  39
  40 #ifdef HAVE_STRINGS_H
  41 #include <strings.h>
  42 #endif
  43
  44 /**
  45  * @file
  46  * Holds support for configuring debug adapters from TCl scripts.
  47  */
  48
  49 extern struct jtag_interface *jtag_interface;
  50 const char * const jtag_only[] = { "jtag", NULL };
  51
  52 static int jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
  53 {
  54         Jim_GetOptInfo goi;
  55         Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
  56
  57         /* return the name of the interface */
  58         /* TCL code might need to know the exact type... */
  59         /* FUTURE: we allow this as a means to "set" the interface. */
  60         if (goi.argc != 0) {
  61                 Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
  62                 return JIM_ERR;
  63         }
  64         const char *name = jtag_interface ? jtag_interface->name : NULL;
  65         Jim_SetResultString(goi.interp, name ? : "undefined", -1);
  66         return JIM_OK;
  67 }
  68
  69 static int default_khz(int khz, int *jtag_speed)
  70 {
  71         LOG_ERROR("Translation from khz to jtag_speed not implemented");
  72         return ERROR_FAIL;
  73 }
  74
  75 static int default_speed_div(int speed, int *khz)
  76 {
  77         LOG_ERROR("Translation from jtag_speed to khz not implemented");
  78         return ERROR_FAIL;
  79 }
  80
  81 static int default_power_dropout(int *dropout)
  82 {
  83         *dropout = 0; /* by default we can't detect power dropout */
  84         return ERROR_OK;
  85 }
  86
  87 static int default_srst_asserted(int *srst_asserted)
  88 {
  89         *srst_asserted = 0; /* by default we can't detect srst asserted */
  90         return ERROR_OK;
  91 }
  92
  93 COMMAND_HANDLER(interface_transport_command)
  94 {
  95         char **transports;
  96         int retval;
  97
  98         retval = CALL_COMMAND_HANDLER(transport_list_parse, &transports);
  99         if (retval != ERROR_OK)
 100                 return retval;
 101
 102         retval = allow_transports(CMD_CTX, (const char **)transports);
 103
 104         if (retval != ERROR_OK) {
 105                 for (unsigned i = 0; transports[i]; i++)
 106                         free(transports[i]);
 107                 free(transports);
 108         }
 109         return retval;
 110 }
 111
 112 COMMAND_HANDLER(handle_interface_list_command)
 113 {
 114         if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
 115                 return ERROR_COMMAND_SYNTAX_ERROR;
 116
 117         command_print(CMD_CTX, "The following debug interfaces are available:");
 118         for (unsigned i = 0; NULL != jtag_interfaces[i]; i++) {
 119                 const char *name = jtag_interfaces[i]->name;
 120                 command_print(CMD_CTX, "%u: %s", i + 1, name);
 121         }
 122
 123         return ERROR_OK;
 124 }
 125
 126 COMMAND_HANDLER(handle_interface_command)
 127 {
 128         int retval;
 129
 130         /* check whether the interface is already configured */
 131         if (jtag_interface) {
 132                 LOG_WARNING("Interface already configured, ignoring");
 133                 return ERROR_OK;
 134         }
 135
 136         /* interface name is a mandatory argument */
 137         if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
 138                 return ERROR_COMMAND_SYNTAX_ERROR;
 139
 140         for (unsigned i = 0; NULL != jtag_interfaces[i]; i++) {
 141                 if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
 142                         continue;
 143
 144                 if (NULL != jtag_interfaces[i]->commands) {
 145                         retval = register_commands(CMD_CTX, NULL,
 146                                         jtag_interfaces[i]->commands);
 147                         if (ERROR_OK != retval)
 148                                 return retval;
 149                 }
 150
 151                 jtag_interface = jtag_interfaces[i];
 152
 153                 /* LEGACY SUPPORT ... adapter drivers  must declare what
 154                  * transports they allow.  Until they all do so, assume
 155                  * the legacy drivers are JTAG-only
 156                  */
 157                 if (!jtag_interface->transports)
 158                         LOG_WARNING("Adapter driver '%s' did not declare "
 159                                 "which transports it allows; assuming "
 160                                 "legacy JTAG-only", jtag_interface->name);
 161                 retval = allow_transports(CMD_CTX, jtag_interface->transports
 162                                                 ? jtag_interface->transports : jtag_only);
 163                         if (ERROR_OK != retval)
 164                                 return retval;
 165
 166                 if (jtag_interface->khz == NULL)
 167                         jtag_interface->khz = default_khz;
 168                 if (jtag_interface->speed_div == NULL)
 169                         jtag_interface->speed_div = default_speed_div;
 170                 if (jtag_interface->power_dropout == NULL)
 171                         jtag_interface->power_dropout = default_power_dropout;
 172                 if (jtag_interface->srst_asserted == NULL)
 173                         jtag_interface->srst_asserted = default_srst_asserted;
 174
 175                 return ERROR_OK;
 176         }
 177
 178         /* no valid interface was found (i.e. the configuration option,
 179          * didn't match one of the compiled-in interfaces
 180          */
 181         LOG_ERROR("The specified debug interface was not found (%s)",
 182                                 CMD_ARGV[0]);
 183         CALL_COMMAND_HANDLER(handle_interface_list_command);
 184         return ERROR_JTAG_INVALID_INTERFACE;
 185 }
 186
 187 COMMAND_HANDLER(handle_reset_config_command)
 188 {
 189         int new_cfg = 0;
 190         int mask = 0;
 191
 192         /* Original versions cared about the order of these tokens:
 193          *   reset_config signals [combination [trst_type [srst_type]]]
 194          * They also clobbered the previous configuration even on error.
 195          *
 196          * Here we don't care about the order, and only change values
 197          * which have been explicitly specified.
 198          */
 199         for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
 200                 int tmp = 0;
 201                 int m;
 202
 203                 /* gating */
 204                 m = RESET_SRST_NO_GATING;
 205                 if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
 206                         /* default: don't use JTAG while SRST asserted */;
 207                 else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
 208                         tmp = RESET_SRST_NO_GATING;
 209                 else
 210                         m = 0;
 211                 if (mask & m) {
 212                         LOG_ERROR("extra reset_config %s spec (%s)",
 213                                         "gating", *CMD_ARGV);
 214                         return ERROR_COMMAND_SYNTAX_ERROR;
 215                 }
 216                 if (m)
 217                         goto next;
 218
 219                 /* signals */
 220                 m = RESET_HAS_TRST | RESET_HAS_SRST;
 221                 if (strcmp(*CMD_ARGV, "none") == 0)
 222                         tmp = RESET_NONE;
 223                 else if (strcmp(*CMD_ARGV, "trst_only") == 0)
 224                         tmp = RESET_HAS_TRST;
 225                 else if (strcmp(*CMD_ARGV, "srst_only") == 0)
 226                         tmp = RESET_HAS_SRST;
 227                 else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
 228                         tmp = RESET_HAS_TRST | RESET_HAS_SRST;
 229                 else
 230                         m = 0;
 231                 if (mask & m) {
 232                         LOG_ERROR("extra reset_config %s spec (%s)",
 233                                         "signal", *CMD_ARGV);
 234                         return ERROR_COMMAND_SYNTAX_ERROR;
 235                 }
 236                 if (m)
 237                         goto next;
 238
 239                 /* combination (options for broken wiring) */
 240                 m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 241                 if (strcmp(*CMD_ARGV, "separate") == 0)
 242                         /* separate reset lines - default */;
 243                 else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
 244                         tmp |= RESET_SRST_PULLS_TRST;
 245                 else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
 246                         tmp |= RESET_TRST_PULLS_SRST;
 247                 else if (strcmp(*CMD_ARGV, "combined") == 0)
 248                         tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
 249                 else
 250                         m = 0;
 251                 if (mask & m) {
 252                         LOG_ERROR("extra reset_config %s spec (%s)",
 253                                         "combination", *CMD_ARGV);
 254                         return ERROR_COMMAND_SYNTAX_ERROR;
 255                 }
 256                 if (m)
 257                         goto next;
 258
 259                 /* trst_type (NOP without HAS_TRST) */
 260                 m = RESET_TRST_OPEN_DRAIN;
 261                 if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
 262                         tmp |= RESET_TRST_OPEN_DRAIN;
 263                 else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
 264                         /* push/pull from adapter - default */;
 265                 else
 266                         m = 0;
 267                 if (mask & m) {
 268                         LOG_ERROR("extra reset_config %s spec (%s)",
 269                                         "trst_type", *CMD_ARGV);
 270                         return ERROR_COMMAND_SYNTAX_ERROR;
 271                 }
 272                 if (m)
 273                         goto next;
 274
 275                 /* srst_type (NOP without HAS_SRST) */
 276                 m = RESET_SRST_PUSH_PULL;
 277                 if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
 278                         tmp |= RESET_SRST_PUSH_PULL;
 279                 else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
 280                         /* open drain from adapter - default */;
 281                 else
 282                         m = 0;
 283                 if (mask & m) {
 284                         LOG_ERROR("extra reset_config %s spec (%s)",
 285                                         "srst_type", *CMD_ARGV);
 286                         return ERROR_COMMAND_SYNTAX_ERROR;
 287                 }
 288                 if (m)
 289                         goto next;
 290
 291                 /* connect_type - only valid when srst_nogate */
 292                 m = RESET_CNCT_UNDER_SRST;
 293                 if (strcmp(*CMD_ARGV, "connect_assert_srst") == 0)
 294                         tmp |= RESET_CNCT_UNDER_SRST;
 295                 else if (strcmp(*CMD_ARGV, "connect_deassert_srst") == 0)
 296                         /* connect normally - default */;
 297                 else
 298                         m = 0;
 299                 if (mask & m) {
 300                         LOG_ERROR("extra reset_config %s spec (%s)",
 301                                         "connect_type", *CMD_ARGV);
 302                         return ERROR_COMMAND_SYNTAX_ERROR;
 303                 }
 304                 if (m)
 305                         goto next;
 306
 307                 /* caller provided nonsense; fail */
 308                 LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
 309                 return ERROR_COMMAND_SYNTAX_ERROR;
 310
 311 next:
 312                 /* Remember the bits which were specified (mask)
 313                  * and their new values (new_cfg).
 314                  */
 315                 mask |= m;
 316                 new_cfg |= tmp;
 317         }
 318
 319         /* clear previous values of those bits, save new values */
 320         if (mask) {
 321                 int old_cfg = jtag_get_reset_config();
 322
 323                 old_cfg &= ~mask;
 324                 new_cfg |= old_cfg;
 325                 jtag_set_reset_config(new_cfg);
 326         } else
 327                 new_cfg = jtag_get_reset_config();
 328
 329         /*
 330          * Display the (now-)current reset mode
 331          */
 332         char *modes[6];
 333
 334         /* minimal JTAG has neither SRST nor TRST (so that's the default) */
 335         switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
 336                 case RESET_HAS_SRST:
 337                         modes[0] = "srst_only";
 338                         break;
 339                 case RESET_HAS_TRST:
 340                         modes[0] = "trst_only";
 341                         break;
 342                 case RESET_TRST_AND_SRST:
 343                         modes[0] = "trst_and_srst";
 344                         break;
 345                 default:
 346                         modes[0] = "none";
 347                         break;
 348         }
 349
 350         /* normally SRST and TRST are decoupled; but bugs happen ... */
 351         switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
 352                 case RESET_SRST_PULLS_TRST:
 353                         modes[1] = "srst_pulls_trst";
 354                         break;
 355                 case RESET_TRST_PULLS_SRST:
 356                         modes[1] = "trst_pulls_srst";
 357                         break;
 358                 case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
 359                         modes[1] = "combined";
 360                         break;
 361                 default:
 362                         modes[1] = "separate";
 363                         break;
 364         }
 365
 366         /* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
 367         if (new_cfg & RESET_HAS_TRST) {
 368                 if (new_cfg & RESET_TRST_OPEN_DRAIN)
 369                         modes[3] = " trst_open_drain";
 370                 else
 371                         modes[3] = " trst_push_pull";
 372         } else
 373                 modes[3] = "";
 374
 375         /* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
 376         if (new_cfg & RESET_HAS_SRST) {
 377                 if (new_cfg & RESET_SRST_NO_GATING)
 378                         modes[2] = " srst_nogate";
 379                 else
 380                         modes[2] = " srst_gates_jtag";
 381
 382                 if (new_cfg & RESET_SRST_PUSH_PULL)
 383                         modes[4] = " srst_push_pull";
 384                 else
 385                         modes[4] = " srst_open_drain";
 386
 387                 if (new_cfg & RESET_CNCT_UNDER_SRST)
 388                         modes[5] = " connect_assert_srst";
 389                 else
 390                         modes[5] = " connect_deassert_srst";
 391         } else {
 392                 modes[2] = "";
 393                 modes[4] = "";
 394                 modes[5] = "";
 395         }
 396
 397         command_print(CMD_CTX, "%s %s%s%s%s%s",
 398                         modes[0], modes[1],
 399                         modes[2], modes[3], modes[4], modes[5]);
 400
 401         return ERROR_OK;
 402 }
 403
 404 COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
 405 {
 406         if (CMD_ARGC > 1)
 407                 return ERROR_COMMAND_SYNTAX_ERROR;
 408         if (CMD_ARGC == 1) {
 409                 unsigned delay;
 410                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
 411
 412                 jtag_set_nsrst_delay(delay);
 413         }
 414         command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
 415         return ERROR_OK;
 416 }
 417
 418 COMMAND_HANDLER(handle_adapter_nsrst_assert_width_command)
 419 {
 420         if (CMD_ARGC > 1)
 421                 return ERROR_COMMAND_SYNTAX_ERROR;
 422         if (CMD_ARGC == 1) {
 423                 unsigned width;
 424                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], width);
 425
 426                 jtag_set_nsrst_assert_width(width);
 427         }
 428         command_print(CMD_CTX, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width());
 429         return ERROR_OK;
 430 }
 431
 432 COMMAND_HANDLER(handle_adapter_khz_command)
 433 {
 434         if (CMD_ARGC > 1)
 435                 return ERROR_COMMAND_SYNTAX_ERROR;
 436
 437         int retval = ERROR_OK;
 438         if (CMD_ARGC == 1) {
 439                 unsigned khz = 0;
 440                 COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
 441
 442                 retval = jtag_config_khz(khz);
 443                 if (ERROR_OK != retval)
 444                         return retval;
 445         }
 446
 447         int cur_speed = jtag_get_speed_khz();
 448         retval = jtag_get_speed_readable(&cur_speed);
 449         if (ERROR_OK != retval)
 450                 return retval;
 451
 452         if (cur_speed)
 453                 command_print(CMD_CTX, "adapter speed: %d kHz", cur_speed);
 454         else
 455                 command_print(CMD_CTX, "adapter speed: RCLK - adaptive");
 456
 457         return retval;
 458 }
 459
 460 #ifndef HAVE_JTAG_MINIDRIVER_H
 461 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 462 COMMAND_HANDLER(handle_usb_location_command)
 463 {
 464         if (CMD_ARGC == 1)
 465                 jtag_usb_set_location(CMD_ARGV[0]);
 466
 467         command_print(CMD_CTX, "adapter usb location: %s", jtag_usb_get_location());
 468
 469         return ERROR_OK;
 470 }
 471 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 472
 473 static const struct command_registration adapter_usb_command_handlers[] = {
 474 #ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
 475         {
 476                 .name = "location",
 477                 .handler = &handle_usb_location_command,
 478                 .mode = COMMAND_CONFIG,
 479                 .help = "set the USB bus location of the USB device",
 480                 .usage = "<bus>-port[.port]...",
 481         },
 482 #endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
 483         COMMAND_REGISTRATION_DONE
 484 };
 485 #endif /* MINIDRIVER */
 486
 487 static const struct command_registration adapter_command_handlers[] = {
 488 #ifndef HAVE_JTAG_MINIDRIVER_H
 489         {
 490                 .name = "usb",
 491                 .mode = COMMAND_ANY,
 492                 .help = "usb adapter command group",
 493                 .usage = "",
 494                 .chain = adapter_usb_command_handlers,
 495         },
 496 #endif /* MINIDRIVER */
 497         COMMAND_REGISTRATION_DONE
 498 };
 499
 500 static const struct command_registration interface_command_handlers[] = {
 501         {
 502                 .name = "adapter",
 503                 .mode = COMMAND_ANY,
 504                 .help = "adapter command group",
 505                 .usage = "",
 506                 .chain = adapter_command_handlers,
 507         },
 508         {
 509                 .name = "adapter_khz",
 510                 .handler = handle_adapter_khz_command,
 511                 .mode = COMMAND_ANY,
 512                 .help = "With an argument, change to the specified maximum "
 513                         "jtag speed.  For JTAG, 0 KHz signifies adaptive "
 514                         " clocking. "
 515                         "With or without argument, display current setting.",
 516                 .usage = "[khz]",
 517         },
 518         {
 519                 .name = "adapter_name",
 520                 .mode = COMMAND_ANY,
 521                 .jim_handler = jim_adapter_name,
 522                 .help = "Returns the name of the currently "
 523                         "selected adapter (driver)",
 524         },
 525         {
 526                 .name = "adapter_nsrst_delay",
 527                 .handler = handle_adapter_nsrst_delay_command,
 528                 .mode = COMMAND_ANY,
 529                 .help = "delay after deasserting SRST in ms",
 530                 .usage = "[milliseconds]",
 531         },
 532         {
 533                 .name = "adapter_nsrst_assert_width",
 534                 .handler = handle_adapter_nsrst_assert_width_command,
 535                 .mode = COMMAND_ANY,
 536                 .help = "delay after asserting SRST in ms",
 537                 .usage = "[milliseconds]",
 538         },
 539         {
 540                 .name = "interface",
 541                 .handler = handle_interface_command,
 542                 .mode = COMMAND_CONFIG,
 543                 .help = "Select a debug adapter interface (driver)",
 544                 .usage = "driver_name",
 545         },
 546         {
 547                 .name = "interface_transports",
 548                 .handler = interface_transport_command,
 549                 .mode = COMMAND_CONFIG,
 550                 .help = "Declare transports the interface supports.",
 551                 .usage = "transport ... ",
 552         },
 553         {
 554                 .name = "interface_list",
 555                 .handler = handle_interface_list_command,
 556                 .mode = COMMAND_ANY,
 557                 .help = "List all built-in debug adapter interfaces (drivers)",
 558         },
 559         {
 560                 .name = "reset_config",
 561                 .handler = handle_reset_config_command,
 562                 .mode = COMMAND_ANY,
 563                 .help = "configure adapter reset behavior",
 564                 .usage = "[none|trst_only|srst_only|trst_and_srst] "
 565                         "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
 566                         "[srst_gates_jtag|srst_nogate] "
 567                         "[trst_push_pull|trst_open_drain] "
 568                         "[srst_push_pull|srst_open_drain] "
 569                         "[connect_deassert_srst|connect_assert_srst]",
 570         },
 571         COMMAND_REGISTRATION_DONE
 572 };
 573
 574 /**
 575  * Register the commands which deal with arbitrary debug adapter drivers.
 576  *
 577  * @todo Remove internal assumptions that all debug adapters use JTAG for
 578  * transport.  Various types and data structures are not named generically.
 579  */
 580 int interface_register_commands(struct command_context *ctx)
 581 {
 582         return register_commands(ctx, NULL, interface_command_handlers);
 583 }