1 # Defines basic Tcl procs for OpenOCD flash module
5 # usage: program filename
6 # optional args: verify, reset, exit and address
9 lappend _telnet_autocomplete_skip program_error
10 proc program_error {description exit} {
19 proc program {filename args} {
24 if {[string equal $arg "preverify"]} {
26 } elseif {[string equal $arg "verify"]} {
28 } elseif {[string equal $arg "reset"]} {
30 } elseif {[string equal $arg "exit"]} {
38 set filename \{$filename\}
39 if {[info exists address]} {
40 set flash_args "$filename $address"
42 set flash_args "$filename"
46 # make sure init is called
47 if {[catch {init}] != 0} {
48 program_error "** OpenOCD init failed **" 1
51 # reset target and call any init scripts
52 if {[catch {reset init}] != 0} {
53 program_error "** Unable to reset target **" $exit
56 # Check whether programming is needed
57 if {[info exists preverify]} {
58 echo "**pre-verifying**"
59 if {[catch {eval verify_image $flash_args}] == 0} {
60 echo "**Verified OK - No flashing**"
65 # start programming phase
66 if {$needsflash == 1} {
67 echo "** Programming Started **"
69 if {[catch {eval flash write_image erase $flash_args}] == 0} {
70 echo "** Programming Finished **"
71 if {[info exists verify]} {
73 echo "** Verify Started **"
74 if {[catch {eval verify_image $flash_args}] == 0} {
75 echo "** Verified OK **"
77 program_error "** Verify Failed **" $exit
81 program_error "** Programming Failed **" $exit
85 if {[info exists reset]} {
86 # reset target if requested
88 # also disable target polling, we are shutting down anyway
91 echo "** Resetting Target **"
102 add_help_text program "write an image to flash, address is only required for binary images. verify, reset, exit are optional"
103 add_usage_text program "<filename> \[address\] \[pre-verify\] \[verify\] \[reset\] \[exit\]"
105 # stm32[f0x|f3x] uses the same flash driver as the stm32f1x
106 proc stm32f0x args { eval stm32f1x $args }
107 proc stm32f3x args { eval stm32f1x $args }
109 # stm32[f4x|f7x] uses the same flash driver as the stm32f2x
110 proc stm32f4x args { eval stm32f2x $args }
111 proc stm32f7x args { eval stm32f2x $args }
113 # stm32lx driver supports both STM32 L0 and L1 devices
114 proc stm32l0x args { eval stm32lx $args }
115 proc stm32l1x args { eval stm32lx $args }
117 # stm32[g0|g4|l5|u5|wb|wl] uses the same flash driver as the stm32l4x
118 proc stm32g0x args { eval stm32l4x $args }
119 proc stm32g4x args { eval stm32l4x $args }
120 proc stm32l5x args { eval stm32l4x $args }
121 proc stm32u5x args { eval stm32l4x $args }
122 proc stm32wbx args { eval stm32l4x $args }
123 proc stm32wlx args { eval stm32l4x $args }
125 # gd32e23x uses the same flash driver as the stm32f1x
126 proc gd32e23x args { eval stm32f1x $args }