git.gag.com Git - fw/openocd/blob - src/flash/nor/tcl.c

   1 /***************************************************************************
   2  *   Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de>              *
   3  *   Copyright (C) 2007,2008 Øyvind Harboe <oyvind.harboe@zylin.com>       *
   4  *   Copyright (C) 2008 by Spencer Oliver <spen@spen-soft.co.uk>           *
   5  *   Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net>             *
   6  *   Copyright (C) 2017-2018 Tomas Vanek <vanekt@fbl.cz>                   *
   7  *                                                                         *
   8  *   This program is free software; you can redistribute it and/or modify  *
   9  *   it under the terms of the GNU General Public License as published by  *
  10  *   the Free Software Foundation; either version 2 of the License, or     *
  11  *   (at your option) any later version.                                   *
  12  *                                                                         *
  13  *   This program is distributed in the hope that it will be useful,       *
  14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  16  *   GNU General Public License for more details.                          *
  17  *                                                                         *
  18  *   You should have received a copy of the GNU General Public License     *
  19  *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  20  ***************************************************************************/
  21 #ifdef HAVE_CONFIG_H
  22 #include "config.h"
  23 #endif
  24 #include "imp.h"
  25 #include <helper/time_support.h>
  26 #include <target/image.h>
  27
  28 /**
  29  * @file
  30  * Implements Tcl commands used to access NOR flash facilities.
  31  */
  32
  33 COMMAND_HELPER(flash_command_get_bank_maybe_probe, unsigned name_index,
  34                struct flash_bank **bank, bool do_probe)
  35 {
  36         const char *name = CMD_ARGV[name_index];
  37         int retval;
  38         if (do_probe) {
  39                 retval = get_flash_bank_by_name(name, bank);
  40         } else {
  41                 *bank  = get_flash_bank_by_name_noprobe(name);
  42                 retval = ERROR_OK;
  43         }
  44
  45         if (retval != ERROR_OK)
  46                 return retval;
  47         if (*bank)
  48                 return ERROR_OK;
  49
  50         unsigned bank_num;
  51         COMMAND_PARSE_NUMBER(uint, name, bank_num);
  52
  53         if (do_probe) {
  54                 return get_flash_bank_by_num(bank_num, bank);
  55         } else {
  56                 *bank  = get_flash_bank_by_num_noprobe(bank_num);
  57                 retval = (bank) ? ERROR_OK : ERROR_FAIL;
  58                 return retval;
  59         }
  60 }
  61
  62 COMMAND_HELPER(flash_command_get_bank, unsigned name_index,
  63         struct flash_bank **bank)
  64 {
  65         return CALL_COMMAND_HANDLER(flash_command_get_bank_maybe_probe,
  66                                     name_index, bank, true);
  67 }
  68
  69 COMMAND_HANDLER(handle_flash_info_command)
  70 {
  71         struct flash_bank *p;
  72         int j = 0;
  73         int retval;
  74         bool show_sectors = false;
  75         bool prot_block_available;
  76
  77         if (CMD_ARGC < 1 || CMD_ARGC > 2)
  78                 return ERROR_COMMAND_SYNTAX_ERROR;
  79
  80         if (CMD_ARGC == 2) {
  81                 if (strcmp("sectors", CMD_ARGV[1]) == 0)
  82                         show_sectors = true;
  83                 else
  84                         return ERROR_COMMAND_SYNTAX_ERROR;
  85         }
  86
  87         retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
  88         if (retval != ERROR_OK)
  89                 return retval;
  90
  91         if (p != NULL) {
  92                 char buf[1024];
  93                 int num_blocks;
  94                 struct flash_sector *block_array;
  95
  96                 /* attempt auto probe */
  97                 retval = p->driver->auto_probe(p);
  98                 if (retval != ERROR_OK)
  99                         return retval;
 100
 101                 /* If the driver does not implement protection, we show the default
 102                  * state of is_protected array - usually protection state unknown */
 103                 if (p->driver->protect_check == NULL) {
 104                         retval = ERROR_FLASH_OPER_UNSUPPORTED;
 105                 } else {
 106                         /* We must query the hardware to avoid printing stale information! */
 107                         retval = p->driver->protect_check(p);
 108                         if (retval != ERROR_OK && retval != ERROR_FLASH_OPER_UNSUPPORTED)
 109                                 return retval;
 110                 }
 111                 if (retval == ERROR_FLASH_OPER_UNSUPPORTED)
 112                         LOG_INFO("Flash protection check is not implemented.");
 113
 114                 command_print(CMD,
 115                         "#%d : %s at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32
 116                         ", buswidth %i, chipwidth %i",
 117                         p->bank_number,
 118                         p->driver->name,
 119                         p->base,
 120                         p->size,
 121                         p->bus_width,
 122                         p->chip_width);
 123
 124                 prot_block_available = p->num_prot_blocks && p->prot_blocks;
 125                 if (!show_sectors && prot_block_available) {
 126                         block_array = p->prot_blocks;
 127                         num_blocks = p->num_prot_blocks;
 128                 } else {
 129                         block_array = p->sectors;
 130                         num_blocks = p->num_sectors;
 131                 }
 132
 133                 for (j = 0; j < num_blocks; j++) {
 134                         char *protect_state = "";
 135
 136                         if (block_array[j].is_protected == 0)
 137                                 protect_state = "not protected";
 138                         else if (block_array[j].is_protected == 1)
 139                                 protect_state = "protected";
 140                         else if (!show_sectors || !prot_block_available)
 141                                 protect_state = "protection state unknown";
 142
 143                         command_print(CMD,
 144                                 "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s",
 145                                 j,
 146                                 block_array[j].offset,
 147                                 block_array[j].size,
 148                                 block_array[j].size >> 10,
 149                                 protect_state);
 150                 }
 151
 152                 if (p->driver->info != NULL) {
 153                         retval = p->driver->info(p, buf, sizeof(buf));
 154                         if (retval == ERROR_OK)
 155                                 command_print(CMD, "%s", buf);
 156                         else
 157                                 LOG_ERROR("error retrieving flash info");
 158                 }
 159         }
 160
 161         return retval;
 162 }
 163
 164 COMMAND_HANDLER(handle_flash_probe_command)
 165 {
 166         struct flash_bank *p;
 167         int retval;
 168
 169         if (CMD_ARGC != 1)
 170                 return ERROR_COMMAND_SYNTAX_ERROR;
 171
 172         retval = CALL_COMMAND_HANDLER(flash_command_get_bank_maybe_probe, 0, &p, false);
 173         if (retval != ERROR_OK)
 174                 return retval;
 175
 176         if (p) {
 177                 retval = p->driver->probe(p);
 178                 if (retval == ERROR_OK)
 179                         command_print(CMD,
 180                                 "flash '%s' found at " TARGET_ADDR_FMT,
 181                                 p->driver->name,
 182                                 p->base);
 183         } else {
 184                 command_print(CMD, "flash bank '#%s' is out of bounds", CMD_ARGV[0]);
 185                 retval = ERROR_FAIL;
 186         }
 187
 188         return retval;
 189 }
 190
 191 COMMAND_HANDLER(handle_flash_erase_check_command)
 192 {
 193         bool blank = true;
 194         if (CMD_ARGC != 1)
 195                 return ERROR_COMMAND_SYNTAX_ERROR;
 196
 197         struct flash_bank *p;
 198         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 199         if (ERROR_OK != retval)
 200                 return retval;
 201
 202         int j;
 203         retval = p->driver->erase_check(p);
 204         if (retval == ERROR_OK)
 205                 command_print(CMD, "successfully checked erase state");
 206         else {
 207                 command_print(CMD,
 208                         "unknown error when checking erase state of flash bank #%s at "
 209                         TARGET_ADDR_FMT,
 210                         CMD_ARGV[0],
 211                         p->base);
 212         }
 213
 214         for (j = 0; j < p->num_sectors; j++) {
 215                 char *erase_state;
 216
 217                 if (p->sectors[j].is_erased == 0)
 218                         erase_state = "not erased";
 219                 else if (p->sectors[j].is_erased == 1)
 220                         continue;
 221                 else
 222                         erase_state = "erase state unknown";
 223
 224                 blank = false;
 225                 command_print(CMD,
 226                         "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s",
 227                         j,
 228                         p->sectors[j].offset,
 229                         p->sectors[j].size,
 230                         p->sectors[j].size >> 10,
 231                         erase_state);
 232         }
 233
 234         if (blank)
 235                 command_print(CMD, "\tBank is erased");
 236         return retval;
 237 }
 238
 239 COMMAND_HANDLER(handle_flash_erase_address_command)
 240 {
 241         struct flash_bank *p;
 242         int retval = ERROR_OK;
 243         target_addr_t address;
 244         uint32_t length;
 245         bool do_pad = false;
 246         bool do_unlock = false;
 247         struct target *target = get_current_target(CMD_CTX);
 248
 249         while (CMD_ARGC >= 3) {
 250                 /* Optionally pad out the address range to block/sector
 251                  * boundaries.  We can't know if there's data in that part
 252                  * of the flash; only do padding if we're told to.
 253                  */
 254                 if (strcmp("pad", CMD_ARGV[0]) == 0)
 255                         do_pad = true;
 256                 else if (strcmp("unlock", CMD_ARGV[0]) == 0)
 257                         do_unlock = true;
 258                 else
 259                         return ERROR_COMMAND_SYNTAX_ERROR;
 260                 CMD_ARGC--;
 261                 CMD_ARGV++;
 262         }
 263         if (CMD_ARGC != 2)
 264                 return ERROR_COMMAND_SYNTAX_ERROR;
 265
 266         COMMAND_PARSE_ADDRESS(CMD_ARGV[0], address);
 267         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length);
 268
 269         if (length <= 0) {
 270                 command_print(CMD, "Length must be >0");
 271                 return ERROR_COMMAND_SYNTAX_ERROR;
 272         }
 273
 274         retval = get_flash_bank_by_addr(target, address, true, &p);
 275         if (retval != ERROR_OK)
 276                 return retval;
 277
 278         /* We can't know if we did a resume + halt, in which case we no longer know the erased state
 279          **/
 280         flash_set_dirty();
 281
 282         struct duration bench;
 283         duration_start(&bench);
 284
 285         if (do_unlock)
 286                 retval = flash_unlock_address_range(target, address, length);
 287
 288         if (retval == ERROR_OK)
 289                 retval = flash_erase_address_range(target, do_pad, address, length);
 290
 291         if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
 292                 command_print(CMD, "erased address " TARGET_ADDR_FMT " (length %"
 293                                 PRIi32 ")"
 294                         " in %fs (%0.3f KiB/s)", address, length,
 295                         duration_elapsed(&bench), duration_kbps(&bench, length));
 296         }
 297
 298         return retval;
 299 }
 300
 301 COMMAND_HANDLER(handle_flash_erase_command)
 302 {
 303         if (CMD_ARGC != 3)
 304                 return ERROR_COMMAND_SYNTAX_ERROR;
 305
 306         uint32_t first;
 307         uint32_t last;
 308
 309         struct flash_bank *p;
 310         int retval;
 311
 312         retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 313         if (retval != ERROR_OK)
 314                 return retval;
 315
 316         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], first);
 317         if (strcmp(CMD_ARGV[2], "last") == 0)
 318                 last = p->num_sectors - 1;
 319         else
 320                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last);
 321
 322         if (!(first <= last)) {
 323                 command_print(CMD, "ERROR: "
 324                         "first sector must be <= last");
 325                 return ERROR_FAIL;
 326         }
 327
 328         if (!(last <= (uint32_t)(p->num_sectors - 1))) {
 329                 command_print(CMD, "ERROR: "
 330                         "last sector must be <= %" PRIu32,
 331                         p->num_sectors - 1);
 332                 return ERROR_FAIL;
 333         }
 334
 335         struct duration bench;
 336         duration_start(&bench);
 337
 338         retval = flash_driver_erase(p, first, last);
 339
 340         if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
 341                 command_print(CMD, "erased sectors %" PRIu32 " "
 342                         "through %" PRIu32 " on flash bank %d "
 343                         "in %fs", first, last, p->bank_number, duration_elapsed(&bench));
 344         }
 345
 346         return retval;
 347 }
 348
 349 COMMAND_HANDLER(handle_flash_protect_command)
 350 {
 351         if (CMD_ARGC != 4)
 352                 return ERROR_COMMAND_SYNTAX_ERROR;
 353
 354         uint32_t first;
 355         uint32_t last;
 356
 357         struct flash_bank *p;
 358         int retval;
 359         int num_blocks;
 360
 361         retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 362         if (retval != ERROR_OK)
 363                 return retval;
 364
 365         if (p->num_prot_blocks)
 366                 num_blocks = p->num_prot_blocks;
 367         else
 368                 num_blocks = p->num_sectors;
 369
 370         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], first);
 371         if (strcmp(CMD_ARGV[2], "last") == 0)
 372                 last = num_blocks - 1;
 373         else
 374                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last);
 375
 376         bool set;
 377         COMMAND_PARSE_ON_OFF(CMD_ARGV[3], set);
 378
 379         if (!(first <= last)) {
 380                 command_print(CMD, "ERROR: "
 381                         "first %s must be <= last",
 382                         (p->num_prot_blocks) ? "block" : "sector");
 383                 return ERROR_FAIL;
 384         }
 385
 386         if (!(last <= (uint32_t)(num_blocks - 1))) {
 387                 command_print(CMD, "ERROR: "
 388                         "last %s must be <= %" PRIu32,
 389                         (p->num_prot_blocks) ? "block" : "sector",
 390                         num_blocks - 1);
 391                 return ERROR_FAIL;
 392         }
 393
 394         retval = flash_driver_protect(p, set, first, last);
 395         if (retval == ERROR_OK) {
 396                 command_print(CMD, "%s protection for %s %" PRIu32
 397                         " through %" PRIu32 " on flash bank %d",
 398                         (set) ? "set" : "cleared",
 399                         (p->num_prot_blocks) ? "blocks" : "sectors",
 400                         first, last, p->bank_number);
 401         }
 402
 403         return retval;
 404 }
 405
 406 COMMAND_HANDLER(handle_flash_write_image_command)
 407 {
 408         struct target *target = get_current_target(CMD_CTX);
 409
 410         struct image image;
 411         uint32_t written;
 412
 413         int retval;
 414
 415         /* flash auto-erase is disabled by default*/
 416         int auto_erase = 0;
 417         bool auto_unlock = false;
 418
 419         while (CMD_ARGC) {
 420                 if (strcmp(CMD_ARGV[0], "erase") == 0) {
 421                         auto_erase = 1;
 422                         CMD_ARGV++;
 423                         CMD_ARGC--;
 424                         command_print(CMD, "auto erase enabled");
 425                 } else if (strcmp(CMD_ARGV[0], "unlock") == 0) {
 426                         auto_unlock = true;
 427                         CMD_ARGV++;
 428                         CMD_ARGC--;
 429                         command_print(CMD, "auto unlock enabled");
 430                 } else
 431                         break;
 432         }
 433
 434         if (CMD_ARGC < 1)
 435                 return ERROR_COMMAND_SYNTAX_ERROR;
 436
 437         if (!target) {
 438                 LOG_ERROR("no target selected");
 439                 return ERROR_FAIL;
 440         }
 441
 442         struct duration bench;
 443         duration_start(&bench);
 444
 445         if (CMD_ARGC >= 2) {
 446                 image.base_address_set = 1;
 447                 COMMAND_PARSE_NUMBER(llong, CMD_ARGV[1], image.base_address);
 448         } else {
 449                 image.base_address_set = 0;
 450                 image.base_address = 0x0;
 451         }
 452
 453         image.start_address_set = 0;
 454
 455         retval = image_open(&image, CMD_ARGV[0], (CMD_ARGC == 3) ? CMD_ARGV[2] : NULL);
 456         if (retval != ERROR_OK)
 457                 return retval;
 458
 459         retval = flash_write_unlock(target, &image, &written, auto_erase, auto_unlock);
 460         if (retval != ERROR_OK) {
 461                 image_close(&image);
 462                 return retval;
 463         }
 464
 465         if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
 466                 command_print(CMD, "wrote %" PRIu32 " bytes from file %s "
 467                         "in %fs (%0.3f KiB/s)", written, CMD_ARGV[0],
 468                         duration_elapsed(&bench), duration_kbps(&bench, written));
 469         }
 470
 471         image_close(&image);
 472
 473         return retval;
 474 }
 475
 476 COMMAND_HANDLER(handle_flash_fill_command)
 477 {
 478         target_addr_t address;
 479         uint64_t pattern;
 480         uint32_t count;
 481         struct target *target = get_current_target(CMD_CTX);
 482         unsigned i;
 483         uint32_t wordsize;
 484         int retval;
 485
 486         if (CMD_ARGC != 3)
 487                 return ERROR_COMMAND_SYNTAX_ERROR;
 488
 489         COMMAND_PARSE_ADDRESS(CMD_ARGV[0], address);
 490         COMMAND_PARSE_NUMBER(u64, CMD_ARGV[1], pattern);
 491         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], count);
 492
 493         struct flash_bank *bank;
 494         retval = get_flash_bank_by_addr(target, address, true, &bank);
 495         if (retval != ERROR_OK)
 496                 return retval;
 497
 498         switch (CMD_NAME[4]) {
 499                 case 'd':
 500                         wordsize = 8;
 501                         break;
 502                 case 'w':
 503                         wordsize = 4;
 504                         break;
 505                 case 'h':
 506                         wordsize = 2;
 507                         break;
 508                 case 'b':
 509                         wordsize = 1;
 510                         break;
 511                 default:
 512                         return ERROR_COMMAND_SYNTAX_ERROR;
 513         }
 514
 515         if ((wordsize < sizeof(pattern)) && (pattern >> (8 * wordsize) != 0)) {
 516                 command_print(CMD, "Fill pattern 0x%" PRIx64 " does not fit within %" PRIu32 "-byte word", pattern, wordsize);
 517                 return ERROR_FAIL;
 518         }
 519
 520         if (count == 0)
 521                 return ERROR_OK;
 522
 523         if (address + count * wordsize > bank->base + bank->size) {
 524                 LOG_ERROR("Cannot cross flash bank borders");
 525                 return ERROR_FAIL;
 526         }
 527
 528         uint32_t size_bytes = count * wordsize;
 529         target_addr_t aligned_start = flash_write_align_start(bank, address);
 530         target_addr_t end_addr = address + size_bytes - 1;
 531         target_addr_t aligned_end = flash_write_align_end(bank, end_addr);
 532         uint32_t aligned_size = aligned_end + 1 - aligned_start;
 533         uint32_t padding_at_start = address - aligned_start;
 534         uint32_t padding_at_end = aligned_end - end_addr;
 535
 536         uint8_t *buffer = malloc(aligned_size);
 537         if (buffer == NULL)
 538                 return ERROR_FAIL;
 539
 540         if (padding_at_start) {
 541                 memset(buffer, bank->default_padded_value, padding_at_start);
 542                 LOG_WARNING("Start address " TARGET_ADDR_FMT
 543                         " breaks the required alignment of flash bank %s",
 544                         address, bank->name);
 545                 LOG_WARNING("Padding %" PRId32 " bytes from " TARGET_ADDR_FMT,
 546                     padding_at_start, aligned_start);
 547         }
 548
 549         uint8_t *ptr = buffer + padding_at_start;
 550
 551         switch (wordsize) {
 552                 case 8:
 553                         for (i = 0; i < count; i++, ptr += wordsize)
 554                                 target_buffer_set_u64(target, ptr, pattern);
 555                         break;
 556                 case 4:
 557                         for (i = 0; i < count; i++, ptr += wordsize)
 558                                 target_buffer_set_u32(target, ptr, pattern);
 559                         break;
 560                 case 2:
 561                         for (i = 0; i < count; i++, ptr += wordsize)
 562                                 target_buffer_set_u16(target, ptr, pattern);
 563                         break;
 564                 case 1:
 565                         memset(ptr, pattern, count);
 566                         ptr += count;
 567                         break;
 568                 default:
 569                         LOG_ERROR("BUG: can't happen");
 570                         exit(-1);
 571         }
 572
 573         if (padding_at_end) {
 574                 memset(ptr, bank->default_padded_value, padding_at_end);
 575                 LOG_INFO("Padding at " TARGET_ADDR_FMT " with %" PRId32
 576                         " bytes (bank write end alignment)",
 577                         end_addr + 1, padding_at_end);
 578         }
 579
 580         struct duration bench;
 581         duration_start(&bench);
 582
 583         retval = flash_driver_write(bank, buffer, aligned_start - bank->base, aligned_size);
 584         if (retval != ERROR_OK)
 585                 goto done;
 586
 587         retval = flash_driver_read(bank, buffer, address - bank->base, size_bytes);
 588         if (retval != ERROR_OK)
 589                 goto done;
 590
 591         for (i = 0, ptr = buffer; i < count; i++) {
 592                 uint64_t readback = 0;
 593
 594                 switch (wordsize) {
 595                         case 8:
 596                                 readback = target_buffer_get_u64(target, ptr);
 597                                 break;
 598                         case 4:
 599                                 readback = target_buffer_get_u32(target, ptr);
 600                                 break;
 601                         case 2:
 602                                 readback = target_buffer_get_u16(target, ptr);
 603                                 break;
 604                         case 1:
 605                                 readback = *ptr;
 606                                 break;
 607                 }
 608                 if (readback != pattern) {
 609                         LOG_ERROR(
 610                                 "Verification error address " TARGET_ADDR_FMT
 611                                 ", read back 0x%02" PRIx64 ", expected 0x%02" PRIx64,
 612                                 address + i * wordsize, readback, pattern);
 613                         retval = ERROR_FAIL;
 614                         goto done;
 615                 }
 616                 ptr += wordsize;
 617         }
 618
 619         if ((retval == ERROR_OK) && (duration_measure(&bench) == ERROR_OK)) {
 620                 command_print(CMD, "wrote %" PRIu32 " bytes to " TARGET_ADDR_FMT
 621                         " in %fs (%0.3f KiB/s)", size_bytes, address,
 622                         duration_elapsed(&bench), duration_kbps(&bench, size_bytes));
 623         }
 624
 625 done:
 626         free(buffer);
 627
 628         return retval;
 629 }
 630
 631 COMMAND_HANDLER(handle_flash_write_bank_command)
 632 {
 633         uint32_t offset;
 634         uint8_t *buffer;
 635         size_t length;
 636         struct fileio *fileio;
 637
 638         if (CMD_ARGC < 2 || CMD_ARGC > 3)
 639                 return ERROR_COMMAND_SYNTAX_ERROR;
 640
 641         struct duration bench;
 642         duration_start(&bench);
 643
 644         struct flash_bank *bank;
 645         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
 646         if (ERROR_OK != retval)
 647                 return retval;
 648
 649         offset = 0;
 650
 651         if (CMD_ARGC > 2)
 652                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], offset);
 653
 654         if (offset > bank->size) {
 655                 LOG_ERROR("Offset 0x%8.8" PRIx32 " is out of range of the flash bank",
 656                         offset);
 657                 return ERROR_COMMAND_ARGUMENT_INVALID;
 658         }
 659
 660         if (fileio_open(&fileio, CMD_ARGV[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
 661                 return ERROR_FAIL;
 662
 663         size_t filesize;
 664         retval = fileio_size(fileio, &filesize);
 665         if (retval != ERROR_OK) {
 666                 fileio_close(fileio);
 667                 return retval;
 668         }
 669
 670         length = MIN(filesize, bank->size - offset);
 671
 672         if (!length) {
 673                 LOG_INFO("Nothing to write to flash bank");
 674                 fileio_close(fileio);
 675                 return ERROR_OK;
 676         }
 677
 678         if (length != filesize)
 679                 LOG_INFO("File content exceeds flash bank size. Only writing the "
 680                         "first %zu bytes of the file", length);
 681
 682         target_addr_t start_addr = bank->base + offset;
 683         target_addr_t aligned_start = flash_write_align_start(bank, start_addr);
 684         target_addr_t end_addr = start_addr + length - 1;
 685         target_addr_t aligned_end = flash_write_align_end(bank, end_addr);
 686         uint32_t aligned_size = aligned_end + 1 - aligned_start;
 687         uint32_t padding_at_start = start_addr - aligned_start;
 688         uint32_t padding_at_end = aligned_end - end_addr;
 689
 690         buffer = malloc(aligned_size);
 691         if (buffer == NULL) {
 692                 fileio_close(fileio);
 693                 LOG_ERROR("Out of memory");
 694                 return ERROR_FAIL;
 695         }
 696
 697         if (padding_at_start) {
 698                 memset(buffer, bank->default_padded_value, padding_at_start);
 699                 LOG_WARNING("Start offset 0x%08" PRIx32
 700                         " breaks the required alignment of flash bank %s",
 701                         offset, bank->name);
 702                 LOG_WARNING("Padding %" PRId32 " bytes from " TARGET_ADDR_FMT,
 703                     padding_at_start, aligned_start);
 704         }
 705
 706         uint8_t *ptr = buffer + padding_at_start;
 707         size_t buf_cnt;
 708         if (fileio_read(fileio, length, ptr, &buf_cnt) != ERROR_OK) {
 709                 free(buffer);
 710                 fileio_close(fileio);
 711                 return ERROR_FAIL;
 712         }
 713
 714         if (buf_cnt != length) {
 715                 LOG_ERROR("Short read");
 716                 free(buffer);
 717                 return ERROR_FAIL;
 718         }
 719
 720         ptr += length;
 721
 722         if (padding_at_end) {
 723                 memset(ptr, bank->default_padded_value, padding_at_end);
 724                 LOG_INFO("Padding at " TARGET_ADDR_FMT " with %" PRId32
 725                         " bytes (bank write end alignment)",
 726                         end_addr + 1, padding_at_end);
 727         }
 728
 729         retval = flash_driver_write(bank, buffer, aligned_start - bank->base, aligned_size);
 730
 731         free(buffer);
 732
 733         if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
 734                 command_print(CMD, "wrote %zu bytes from file %s to flash bank %u"
 735                         " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)",
 736                         length, CMD_ARGV[1], bank->bank_number, offset,
 737                         duration_elapsed(&bench), duration_kbps(&bench, length));
 738         }
 739
 740         fileio_close(fileio);
 741
 742         return retval;
 743 }
 744
 745 COMMAND_HANDLER(handle_flash_read_bank_command)
 746 {
 747         uint32_t offset;
 748         uint8_t *buffer;
 749         struct fileio *fileio;
 750         uint32_t length;
 751         size_t written;
 752
 753         if (CMD_ARGC < 2 || CMD_ARGC > 4)
 754                 return ERROR_COMMAND_SYNTAX_ERROR;
 755
 756         struct duration bench;
 757         duration_start(&bench);
 758
 759         struct flash_bank *p;
 760         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 761
 762         if (ERROR_OK != retval)
 763                 return retval;
 764
 765         offset = 0;
 766
 767         if (CMD_ARGC > 2)
 768                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], offset);
 769
 770         if (offset > p->size) {
 771                 LOG_ERROR("Offset 0x%8.8" PRIx32 " is out of range of the flash bank",
 772                         offset);
 773                 return ERROR_COMMAND_ARGUMENT_INVALID;
 774         }
 775
 776         length = p->size - offset;
 777
 778         if (CMD_ARGC > 3)
 779                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], length);
 780
 781         if (offset + length > p->size) {
 782                 LOG_ERROR("Length of %" PRIu32 " bytes with offset 0x%8.8" PRIx32
 783                         " is out of range of the flash bank", length, offset);
 784                 return ERROR_COMMAND_ARGUMENT_INVALID;
 785         }
 786
 787         buffer = malloc(length);
 788         if (buffer == NULL) {
 789                 LOG_ERROR("Out of memory");
 790                 return ERROR_FAIL;
 791         }
 792
 793         retval = flash_driver_read(p, buffer, offset, length);
 794         if (retval != ERROR_OK) {
 795                 LOG_ERROR("Read error");
 796                 free(buffer);
 797                 return retval;
 798         }
 799
 800         retval = fileio_open(&fileio, CMD_ARGV[1], FILEIO_WRITE, FILEIO_BINARY);
 801         if (retval != ERROR_OK) {
 802                 LOG_ERROR("Could not open file");
 803                 free(buffer);
 804                 return retval;
 805         }
 806
 807         retval = fileio_write(fileio, length, buffer, &written);
 808         fileio_close(fileio);
 809         free(buffer);
 810         if (retval != ERROR_OK) {
 811                 LOG_ERROR("Could not write file");
 812                 return ERROR_FAIL;
 813         }
 814
 815         if (duration_measure(&bench) == ERROR_OK)
 816                 command_print(CMD, "wrote %zd bytes to file %s from flash bank %u"
 817                         " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)",
 818                         written, CMD_ARGV[1], p->bank_number, offset,
 819                         duration_elapsed(&bench), duration_kbps(&bench, written));
 820
 821         return retval;
 822 }
 823
 824
 825 COMMAND_HANDLER(handle_flash_verify_bank_command)
 826 {
 827         uint32_t offset;
 828         uint8_t *buffer_file, *buffer_flash;
 829         struct fileio *fileio;
 830         size_t read_cnt;
 831         size_t filesize;
 832         size_t length;
 833         int differ;
 834
 835         if (CMD_ARGC < 2 || CMD_ARGC > 3)
 836                 return ERROR_COMMAND_SYNTAX_ERROR;
 837
 838         struct duration bench;
 839         duration_start(&bench);
 840
 841         struct flash_bank *p;
 842         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 843         if (ERROR_OK != retval)
 844                 return retval;
 845
 846         offset = 0;
 847
 848         if (CMD_ARGC > 2)
 849                 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], offset);
 850
 851         if (offset > p->size) {
 852                 LOG_ERROR("Offset 0x%8.8" PRIx32 " is out of range of the flash bank",
 853                         offset);
 854                 return ERROR_COMMAND_ARGUMENT_INVALID;
 855         }
 856
 857         retval = fileio_open(&fileio, CMD_ARGV[1], FILEIO_READ, FILEIO_BINARY);
 858         if (retval != ERROR_OK) {
 859                 LOG_ERROR("Could not open file");
 860                 return retval;
 861         }
 862
 863         retval = fileio_size(fileio, &filesize);
 864         if (retval != ERROR_OK) {
 865                 fileio_close(fileio);
 866                 return retval;
 867         }
 868
 869         length = MIN(filesize, p->size - offset);
 870
 871         if (!length) {
 872                 LOG_INFO("Nothing to compare with flash bank");
 873                 fileio_close(fileio);
 874                 return ERROR_OK;
 875         }
 876
 877         if (length != filesize)
 878                 LOG_INFO("File content exceeds flash bank size. Only comparing the "
 879                         "first %zu bytes of the file", length);
 880
 881         buffer_file = malloc(length);
 882         if (buffer_file == NULL) {
 883                 LOG_ERROR("Out of memory");
 884                 fileio_close(fileio);
 885                 return ERROR_FAIL;
 886         }
 887
 888         retval = fileio_read(fileio, length, buffer_file, &read_cnt);
 889         fileio_close(fileio);
 890         if (retval != ERROR_OK) {
 891                 LOG_ERROR("File read failure");
 892                 free(buffer_file);
 893                 return retval;
 894         }
 895
 896         if (read_cnt != length) {
 897                 LOG_ERROR("Short read");
 898                 free(buffer_file);
 899                 return ERROR_FAIL;
 900         }
 901
 902         buffer_flash = malloc(length);
 903         if (buffer_flash == NULL) {
 904                 LOG_ERROR("Out of memory");
 905                 free(buffer_file);
 906                 return ERROR_FAIL;
 907         }
 908
 909         retval = flash_driver_read(p, buffer_flash, offset, length);
 910         if (retval != ERROR_OK) {
 911                 LOG_ERROR("Flash read error");
 912                 free(buffer_flash);
 913                 free(buffer_file);
 914                 return retval;
 915         }
 916
 917         if (duration_measure(&bench) == ERROR_OK)
 918                 command_print(CMD, "read %zd bytes from file %s and flash bank %u"
 919                         " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)",
 920                         length, CMD_ARGV[1], p->bank_number, offset,
 921                         duration_elapsed(&bench), duration_kbps(&bench, length));
 922
 923         differ = memcmp(buffer_file, buffer_flash, length);
 924         command_print(CMD, "contents %s", differ ? "differ" : "match");
 925         if (differ) {
 926                 uint32_t t;
 927                 int diffs = 0;
 928                 for (t = 0; t < length; t++) {
 929                         if (buffer_flash[t] == buffer_file[t])
 930                                 continue;
 931                         command_print(CMD, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x",
 932                                         diffs, t + offset, buffer_flash[t], buffer_file[t]);
 933                         if (diffs++ >= 127) {
 934                                 command_print(CMD, "More than 128 errors, the rest are not printed.");
 935                                 break;
 936                         }
 937                         keep_alive();
 938                 }
 939         }
 940         free(buffer_flash);
 941         free(buffer_file);
 942
 943         return differ ? ERROR_FAIL : ERROR_OK;
 944 }
 945
 946 void flash_set_dirty(void)
 947 {
 948         struct flash_bank *c;
 949         int i;
 950
 951         /* set all flash to require erasing */
 952         for (c = flash_bank_list(); c; c = c->next) {
 953                 for (i = 0; i < c->num_sectors; i++)
 954                         c->sectors[i].is_erased = 0;
 955         }
 956 }
 957
 958 COMMAND_HANDLER(handle_flash_padded_value_command)
 959 {
 960         if (CMD_ARGC != 2)
 961                 return ERROR_COMMAND_SYNTAX_ERROR;
 962
 963         struct flash_bank *p;
 964         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p);
 965         if (ERROR_OK != retval)
 966                 return retval;
 967
 968         COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], p->default_padded_value);
 969
 970         command_print(CMD, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \
 971                         p->default_padded_value, p->bank_number);
 972
 973         return retval;
 974 }
 975
 976 static const struct command_registration flash_exec_command_handlers[] = {
 977         {
 978                 .name = "probe",
 979                 .handler = handle_flash_probe_command,
 980                 .mode = COMMAND_EXEC,
 981                 .usage = "bank_id",
 982                 .help = "Identify a flash bank.",
 983         },
 984         {
 985                 .name = "info",
 986                 .handler = handle_flash_info_command,
 987                 .mode = COMMAND_EXEC,
 988                 .usage = "bank_id ['sectors']",
 989                 .help = "Print information about a flash bank.",
 990         },
 991         {
 992                 .name = "erase_check",
 993                 .handler = handle_flash_erase_check_command,
 994                 .mode = COMMAND_EXEC,
 995                 .usage = "bank_id",
 996                 .help = "Check erase state of all blocks in a "
 997                         "flash bank.",
 998         },
 999         {
1000                 .name = "erase_sector",
1001                 .handler = handle_flash_erase_command,
1002                 .mode = COMMAND_EXEC,
1003                 .usage = "bank_id first_sector_num (last_sector_num|'last')",
1004                 .help = "Erase a range of sectors in a flash bank.",
1005         },
1006         {
1007                 .name = "erase_address",
1008                 .handler = handle_flash_erase_address_command,
1009                 .mode = COMMAND_EXEC,
1010                 .usage = "['pad'] ['unlock'] address length",
1011                 .help = "Erase flash sectors starting at address and "
1012                         "continuing for length bytes.  If 'pad' is specified, "
1013                         "data outside that range may also be erased: the start "
1014                         "address may be decreased, and length increased, so "
1015                         "that all of the first and last sectors are erased. "
1016                         "If 'unlock' is specified, then the flash is unprotected "
1017                         "before erasing.",
1018
1019         },
1020         {
1021                 .name = "filld",
1022                 .handler = handle_flash_fill_command,
1023                 .mode = COMMAND_EXEC,
1024                 .usage = "address value n",
1025                 .help = "Fill n double-words with 64-bit value, starting at "
1026                         "word address.  (No autoerase.)",
1027         },
1028         {
1029                 .name = "fillw",
1030                 .handler = handle_flash_fill_command,
1031                 .mode = COMMAND_EXEC,
1032                 .usage = "address value n",
1033                 .help = "Fill n words with 32-bit value, starting at "
1034                         "word address.  (No autoerase.)",
1035         },
1036         {
1037                 .name = "fillh",
1038                 .handler = handle_flash_fill_command,
1039                 .mode = COMMAND_EXEC,
1040                 .usage = "address value n",
1041                 .help = "Fill n halfwords with 16-bit value, starting at "
1042                         "word address.  (No autoerase.)",
1043         },
1044         {
1045                 .name = "fillb",
1046                 .handler = handle_flash_fill_command,
1047                 .mode = COMMAND_EXEC,
1048                 .usage = "address value n",
1049                 .help = "Fill n bytes with 8-bit value, starting at "
1050                         "word address.  (No autoerase.)",
1051         },
1052         {
1053                 .name = "write_bank",
1054                 .handler = handle_flash_write_bank_command,
1055                 .mode = COMMAND_EXEC,
1056                 .usage = "bank_id filename [offset]",
1057                 .help = "Write binary data from file to flash bank. Allow optional "
1058                         "offset from beginning of the bank (defaults to zero).",
1059         },
1060         {
1061                 .name = "write_image",
1062                 .handler = handle_flash_write_image_command,
1063                 .mode = COMMAND_EXEC,
1064                 .usage = "[erase] [unlock] filename [offset [file_type]]",
1065                 .help = "Write an image to flash.  Optionally first unprotect "
1066                         "and/or erase the region to be used.  Allow optional "
1067                         "offset from beginning of bank (defaults to zero)",
1068         },
1069         {
1070                 .name = "read_bank",
1071                 .handler = handle_flash_read_bank_command,
1072                 .mode = COMMAND_EXEC,
1073                 .usage = "bank_id filename [offset [length]]",
1074                 .help = "Read binary data from flash bank to file. Allow optional "
1075                         "offset from beginning of the bank (defaults to zero).",
1076         },
1077         {
1078                 .name = "verify_bank",
1079                 .handler = handle_flash_verify_bank_command,
1080                 .mode = COMMAND_EXEC,
1081                 .usage = "bank_id filename [offset]",
1082                 .help = "Compare the contents of a file with the contents of the "
1083                         "flash bank. Allow optional offset from beginning of the bank "
1084                         "(defaults to zero).",
1085         },
1086         {
1087                 .name = "protect",
1088                 .handler = handle_flash_protect_command,
1089                 .mode = COMMAND_EXEC,
1090                 .usage = "bank_id first_block [last_block|'last'] "
1091                         "('on'|'off')",
1092                 .help = "Turn protection on or off for a range of protection "
1093                         "blocks or sectors in a given flash bank. "
1094                         "See 'flash info' output for a list of blocks.",
1095         },
1096         {
1097                 .name = "padded_value",
1098                 .handler = handle_flash_padded_value_command,
1099                 .mode = COMMAND_EXEC,
1100                 .usage = "bank_id value",
1101                 .help = "Set default flash padded value",
1102         },
1103         COMMAND_REGISTRATION_DONE
1104 };
1105
1106 static int flash_init_drivers(struct command_context *cmd_ctx)
1107 {
1108         if (!flash_bank_list())
1109                 return ERROR_OK;
1110
1111         struct command *parent = command_find_in_context(cmd_ctx, "flash");
1112         return register_commands(cmd_ctx, parent, flash_exec_command_handlers);
1113 }
1114
1115 COMMAND_HANDLER(handle_flash_bank_command)
1116 {
1117         if (CMD_ARGC < 7) {
1118                 LOG_ERROR("usage: flash bank <name> <driver> "
1119                         "<base> <size> <chip_width> <bus_width> <target>");
1120                 return ERROR_COMMAND_SYNTAX_ERROR;
1121         }
1122         /* save bank name and advance arguments for compatibility */
1123         const char *bank_name = *CMD_ARGV++;
1124         CMD_ARGC--;
1125
1126         struct target *target = get_target(CMD_ARGV[5]);
1127         if (target == NULL) {
1128                 LOG_ERROR("target '%s' not defined", CMD_ARGV[5]);
1129                 return ERROR_FAIL;
1130         }
1131
1132         const char *driver_name = CMD_ARGV[0];
1133         const struct flash_driver *driver = flash_driver_find_by_name(driver_name);
1134         if (NULL == driver) {
1135                 /* no matching flash driver found */
1136                 LOG_ERROR("flash driver '%s' not found", driver_name);
1137                 return ERROR_FAIL;
1138         }
1139
1140         /* check the flash bank name is unique */
1141         if (get_flash_bank_by_name_noprobe(bank_name) != NULL) {
1142                 /* flash bank name already exists  */
1143                 LOG_ERROR("flash bank name '%s' already exists", bank_name);
1144                 return ERROR_FAIL;
1145         }
1146
1147         /* register flash specific commands */
1148         if (NULL != driver->commands) {
1149                 int retval = register_commands(CMD_CTX, NULL,
1150                                 driver->commands);
1151                 if (ERROR_OK != retval) {
1152                         LOG_ERROR("couldn't register '%s' commands",
1153                                 driver_name);
1154                         return ERROR_FAIL;
1155                 }
1156         }
1157
1158         struct flash_bank *c = calloc(1, sizeof(*c));
1159         c->name = strdup(bank_name);
1160         c->target = target;
1161         c->driver = driver;
1162         COMMAND_PARSE_NUMBER(target_addr, CMD_ARGV[1], c->base);
1163         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], c->size);
1164         COMMAND_PARSE_NUMBER(int, CMD_ARGV[3], c->chip_width);
1165         COMMAND_PARSE_NUMBER(int, CMD_ARGV[4], c->bus_width);
1166         c->default_padded_value = c->erased_value = 0xff;
1167         c->minimal_write_gap = FLASH_WRITE_GAP_SECTOR;
1168
1169         int retval;
1170         retval = CALL_COMMAND_HANDLER(driver->flash_bank_command, c);
1171         if (ERROR_OK != retval) {
1172                 LOG_ERROR("'%s' driver rejected flash bank at " TARGET_ADDR_FMT
1173                                 "; usage: %s", driver_name, c->base, driver->usage);
1174                 free(c);
1175                 return retval;
1176         }
1177
1178         if (driver->usage == NULL)
1179                 LOG_DEBUG("'%s' driver usage field missing", driver_name);
1180
1181         flash_bank_add(c);
1182
1183         return ERROR_OK;
1184 }
1185
1186 COMMAND_HANDLER(handle_flash_banks_command)
1187 {
1188         if (CMD_ARGC != 0)
1189                 return ERROR_COMMAND_SYNTAX_ERROR;
1190
1191         unsigned n = 0;
1192         for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++) {
1193                 command_print(CMD, "#%d : %s (%s) at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", "
1194                         "buswidth %u, chipwidth %u", p->bank_number,
1195                         p->name, p->driver->name, p->base, p->size,
1196                         p->bus_width, p->chip_width);
1197         }
1198         return ERROR_OK;
1199 }
1200
1201 static int jim_flash_list(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
1202 {
1203         if (argc != 1) {
1204                 Jim_WrongNumArgs(interp, 1, argv,
1205                         "no arguments to 'flash list' command");
1206                 return JIM_ERR;
1207         }
1208
1209         Jim_Obj *list = Jim_NewListObj(interp, NULL, 0);
1210
1211         for (struct flash_bank *p = flash_bank_list(); p; p = p->next) {
1212                 Jim_Obj *elem = Jim_NewListObj(interp, NULL, 0);
1213
1214                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "name", -1));
1215                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, p->driver->name, -1));
1216                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "base", -1));
1217                 Jim_ListAppendElement(interp, elem, Jim_NewIntObj(interp, p->base));
1218                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "size", -1));
1219                 Jim_ListAppendElement(interp, elem, Jim_NewIntObj(interp, p->size));
1220                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "bus_width", -1));
1221                 Jim_ListAppendElement(interp, elem, Jim_NewIntObj(interp, p->bus_width));
1222                 Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "chip_width", -1));
1223                 Jim_ListAppendElement(interp, elem, Jim_NewIntObj(interp, p->chip_width));
1224
1225                 Jim_ListAppendElement(interp, list, elem);
1226         }
1227
1228         Jim_SetResult(interp, list);
1229
1230         return JIM_OK;
1231 }
1232
1233 COMMAND_HANDLER(handle_flash_init_command)
1234 {
1235         if (CMD_ARGC != 0)
1236                 return ERROR_COMMAND_SYNTAX_ERROR;
1237
1238         static bool flash_initialized;
1239         if (flash_initialized) {
1240                 LOG_INFO("'flash init' has already been called");
1241                 return ERROR_OK;
1242         }
1243         flash_initialized = true;
1244
1245         LOG_DEBUG("Initializing flash devices...");
1246         return flash_init_drivers(CMD_CTX);
1247 }
1248
1249 static const struct command_registration flash_config_command_handlers[] = {
1250         {
1251                 .name = "bank",
1252                 .handler = handle_flash_bank_command,
1253                 .mode = COMMAND_CONFIG,
1254                 .usage = "bank_id driver_name base_address size_bytes "
1255                         "chip_width_bytes bus_width_bytes target "
1256                         "[driver_options ...]",
1257                 .help = "Define a new bank with the given name, "
1258                         "using the specified NOR flash driver.",
1259         },
1260         {
1261                 .name = "init",
1262                 .mode = COMMAND_CONFIG,
1263                 .handler = handle_flash_init_command,
1264                 .help = "Initialize flash devices.",
1265                 .usage = "",
1266         },
1267         {
1268                 .name = "banks",
1269                 .mode = COMMAND_ANY,
1270                 .handler = handle_flash_banks_command,
1271                 .help = "Display table with information about flash banks.",
1272                 .usage = "",
1273         },
1274         {
1275                 .name = "list",
1276                 .mode = COMMAND_ANY,
1277                 .jim_handler = jim_flash_list,
1278                 .help = "Returns a list of details about the flash banks.",
1279         },
1280         COMMAND_REGISTRATION_DONE
1281 };
1282 static const struct command_registration flash_command_handlers[] = {
1283         {
1284                 .name = "flash",
1285                 .mode = COMMAND_ANY,
1286                 .help = "NOR flash command group",
1287                 .chain = flash_config_command_handlers,
1288                 .usage = "",
1289         },
1290         COMMAND_REGISTRATION_DONE
1291 };
1292
1293 int flash_register_commands(struct command_context *cmd_ctx)
1294 {
1295         return register_commands(cmd_ctx, NULL, flash_command_handlers);
1296 }