git.gag.com Git - fw/openocd/blob - src/flash/nor/stm32l4x.c

   1 /***************************************************************************
   2  *   Copyright (C) 2015 by Uwe Bonnes                                      *
   3  *   bon@elektron.ikp.physik.tu-darmstadt.de                               *
   4  *                                                                         *
   5  *   Copyright (C) 2019 by Tarek Bochkati for STMicroelectronics           *
   6  *   tarek.bouchkati@gmail.com                                             *
   7  *                                                                         *
   8  *   This program is free software; you can redistribute it and/or modify  *
   9  *   it under the terms of the GNU General Public License as published by  *
  10  *   the Free Software Foundation; either version 2 of the License, or     *
  11  *   (at your option) any later version.                                   *
  12  *                                                                         *
  13  *   This program is distributed in the hope that it will be useful,       *
  14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  16  *   GNU General Public License for more details.                          *
  17  *                                                                         *
  18  *   You should have received a copy of the GNU General Public License     *
  19  *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  20  ***************************************************************************/
  21
  22 #ifdef HAVE_CONFIG_H
  23 #include "config.h"
  24 #endif
  25
  26 #include "imp.h"
  27 #include <helper/binarybuffer.h>
  28 #include <target/algorithm.h>
  29 #include <target/armv7m.h>
  30 #include "bits.h"
  31
  32 /* STM32L4xxx series for reference.
  33  *
  34  * RM0351 (STM32L4x5/STM32L4x6)
  35  * http://www.st.com/resource/en/reference_manual/dm00083560.pdf
  36  *
  37  * RM0394 (STM32L43x/44x/45x/46x)
  38  * http://www.st.com/resource/en/reference_manual/dm00151940.pdf
  39  *
  40  * RM0432 (STM32L4R/4Sxx)
  41  * http://www.st.com/resource/en/reference_manual/dm00310109.pdf
  42  *
  43  * STM32L476RG Datasheet (for erase timing)
  44  * http://www.st.com/resource/en/datasheet/stm32l476rg.pdf
  45  *
  46  * The RM0351 devices have normally two banks, but on 512 and 256 kiB devices
  47  * an option byte is available to map all sectors to the first bank.
  48  * Both STM32 banks are treated as one OpenOCD bank, as other STM32 devices
  49  * handlers do!
  50  *
  51  * RM0394 devices have a single bank only.
  52  *
  53  * RM0432 devices have single and dual bank operating modes.
  54  *  - for STM32L4R/Sxx the FLASH size is 2Mbyte or 1Mbyte.
  55  *  - for STM32L4P/Q5x the FLASH size is 1Mbyte or 512Kbyte.
  56  * Bank page (sector) size is 4Kbyte (dual mode) or 8Kbyte (single mode).
  57  *
  58  * Bank mode is controlled by two different bits in option bytes register.
  59  *  - for STM32L4R/Sxx
  60  *    In 2M FLASH devices bit 22 (DBANK) controls Dual Bank mode.
  61  *    In 1M FLASH devices bit 21 (DB1M) controls Dual Bank mode.
  62  *  - for STM32L4P5/Q5x
  63  *    In 1M FLASH devices bit 22 (DBANK) controls Dual Bank mode.
  64  *    In 512K FLASH devices bit 21 (DB512K) controls Dual Bank mode.
  65  *
  66  */
  67
  68 /* Erase time can be as high as 25ms, 10x this and assume it's toast... */
  69
  70 #define FLASH_ERASE_TIMEOUT 250
  71
  72 /* Flash registers offsets */
  73 #define STM32_FLASH_ACR     0x00
  74 #define STM32_FLASH_KEYR    0x08
  75 #define STM32_FLASH_OPTKEYR 0x0c
  76 #define STM32_FLASH_SR      0x10
  77 #define STM32_FLASH_CR      0x14
  78 #define STM32_FLASH_OPTR    0x20
  79 #define STM32_FLASH_WRP1AR  0x2c
  80 #define STM32_FLASH_WRP1BR  0x30
  81 #define STM32_FLASH_WRP2AR  0x4c
  82 #define STM32_FLASH_WRP2BR  0x50
  83
  84 /* FLASH_CR register bits */
  85 #define FLASH_PG        (1 << 0)
  86 #define FLASH_PER       (1 << 1)
  87 #define FLASH_MER1      (1 << 2)
  88 #define FLASH_PAGE_SHIFT      3
  89 #define FLASH_CR_BKER   (1 << 11)
  90 #define FLASH_MER2      (1 << 15)
  91 #define FLASH_STRT      (1 << 16)
  92 #define FLASH_OPTSTRT   (1 << 17)
  93 #define FLASH_EOPIE     (1 << 24)
  94 #define FLASH_ERRIE     (1 << 25)
  95 #define FLASH_OBLLAUNCH (1 << 27)
  96 #define FLASH_OPTLOCK   (1 << 30)
  97 #define FLASH_LOCK      (1 << 31)
  98
  99 /* FLASH_SR register bits */
 100 #define FLASH_BSY      (1 << 16)
 101 /* Fast programming not used => related errors not used*/
 102 #define FLASH_PGSERR   (1 << 7) /* Programming sequence error */
 103 #define FLASH_SIZERR   (1 << 6) /* Size error */
 104 #define FLASH_PGAERR   (1 << 5) /* Programming alignment error */
 105 #define FLASH_WRPERR   (1 << 4) /* Write protection error */
 106 #define FLASH_PROGERR  (1 << 3) /* Programming error */
 107 #define FLASH_OPERR    (1 << 1) /* Operation error */
 108 #define FLASH_EOP      (1 << 0) /* End of operation */
 109 #define FLASH_ERROR (FLASH_PGSERR | FLASH_SIZERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_PROGERR | FLASH_OPERR)
 110
 111 /* register unlock keys */
 112 #define KEY1           0x45670123
 113 #define KEY2           0xCDEF89AB
 114
 115 /* option register unlock key */
 116 #define OPTKEY1        0x08192A3B
 117 #define OPTKEY2        0x4C5D6E7F
 118
 119 #define RDP_LEVEL_0        0xAA
 120 #define RDP_LEVEL_1        0xBB
 121 #define RDP_LEVEL_2        0xCC
 122
 123
 124 /* other registers */
 125 #define DBGMCU_IDCODE   0xE0042000
 126
 127
 128 struct stm32l4_rev {
 129         const uint16_t rev;
 130         const char *str;
 131 };
 132
 133 struct stm32l4_part_info {
 134         uint16_t id;
 135         const char *device_str;
 136         const struct stm32l4_rev *revs;
 137         const size_t num_revs;
 138         const uint16_t max_flash_size_kb;
 139         const bool has_dual_bank;
 140         const uint32_t flash_regs_base;
 141         const uint32_t fsize_addr;
 142 };
 143
 144 struct stm32l4_flash_bank {
 145         int probed;
 146         uint32_t idcode;
 147         int bank1_sectors;
 148         bool dual_bank_mode;
 149         int hole_sectors;
 150         const struct stm32l4_part_info *part_info;
 151 };
 152
 153 static const struct stm32l4_rev stm32_415_revs[] = {
 154         { 0x1000, "1" }, { 0x1001, "2" }, { 0x1003, "3" }, { 0x1007, "4" }
 155 };
 156
 157 static const struct stm32l4_rev stm32_435_revs[] = {
 158         { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2001, "Y" },
 159 };
 160
 161 static const struct stm32l4_rev stm32_461_revs[] = {
 162         { 0x1000, "A" }, { 0x2000, "B" },
 163 };
 164
 165 static const struct stm32l4_rev stm32_462_revs[] = {
 166                 { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2001, "Y" },
 167 };
 168
 169 static const struct stm32l4_rev stm32_464_revs[] = {
 170         { 0x1000, "A" },
 171 };
 172
 173 static const struct stm32l4_rev stm32_470_revs[] = {
 174         { 0x1000, "A" }, { 0x1001, "Z" }, { 0x1003, "Y" }, { 0x100F, "W" },
 175 };
 176
 177 static const struct stm32l4_rev stm32_471_revs[] = {
 178         { 0x1000, "1" },
 179 };
 180
 181 static const struct stm32l4_rev stm32_495_revs[] = {
 182         { 0x2001, "2.1" },
 183 };
 184
 185 static const struct stm32l4_part_info stm32l4_parts[] = {
 186         {
 187           .id                    = 0x415,
 188           .revs                  = stm32_415_revs,
 189           .num_revs              = ARRAY_SIZE(stm32_415_revs),
 190           .device_str            = "STM32L47/L48xx",
 191           .max_flash_size_kb     = 1024,
 192           .has_dual_bank         = true,
 193           .flash_regs_base       = 0x40022000,
 194           .fsize_addr            = 0x1FFF75E0,
 195         },
 196         {
 197           .id                    = 0x435,
 198           .revs                  = stm32_435_revs,
 199           .num_revs              = ARRAY_SIZE(stm32_435_revs),
 200           .device_str            = "STM32L43/L44xx",
 201           .max_flash_size_kb     = 256,
 202           .has_dual_bank         = false,
 203           .flash_regs_base       = 0x40022000,
 204           .fsize_addr            = 0x1FFF75E0,
 205         },
 206         {
 207           .id                    = 0x461,
 208           .revs                  = stm32_461_revs,
 209           .num_revs              = ARRAY_SIZE(stm32_461_revs),
 210           .device_str            = "STM32L49/L4Axx",
 211           .max_flash_size_kb     = 1024,
 212           .has_dual_bank         = true,
 213           .flash_regs_base       = 0x40022000,
 214           .fsize_addr            = 0x1FFF75E0,
 215         },
 216         {
 217           .id                    = 0x462,
 218           .revs                  = stm32_462_revs,
 219           .num_revs              = ARRAY_SIZE(stm32_462_revs),
 220           .device_str            = "STM32L45/L46xx",
 221           .max_flash_size_kb     = 512,
 222           .has_dual_bank         = false,
 223           .flash_regs_base       = 0x40022000,
 224           .fsize_addr            = 0x1FFF75E0,
 225         },
 226         {
 227           .id                    = 0x464,
 228           .revs                  = stm32_464_revs,
 229           .num_revs              = ARRAY_SIZE(stm32_464_revs),
 230           .device_str            = "STM32L41/L42xx",
 231           .max_flash_size_kb     = 128,
 232           .has_dual_bank         = false,
 233           .flash_regs_base       = 0x40022000,
 234           .fsize_addr            = 0x1FFF75E0,
 235         },
 236         {
 237           .id                    = 0x470,
 238           .revs                  = stm32_470_revs,
 239           .num_revs              = ARRAY_SIZE(stm32_470_revs),
 240           .device_str            = "STM32L4R/L4Sxx",
 241           .max_flash_size_kb     = 2048,
 242           .has_dual_bank         = true,
 243           .flash_regs_base       = 0x40022000,
 244           .fsize_addr            = 0x1FFF75E0,
 245         },
 246         {
 247           .id                    = 0x471,
 248           .revs                  = stm32_471_revs,
 249           .num_revs              = ARRAY_SIZE(stm32_471_revs),
 250           .device_str            = "STM32L4P5/L4Q5x",
 251           .max_flash_size_kb     = 1024,
 252           .has_dual_bank         = true,
 253           .flash_regs_base       = 0x40022000,
 254           .fsize_addr            = 0x1FFF75E0,
 255         },
 256         {
 257           .id                    = 0x495,
 258           .revs                  = stm32_495_revs,
 259           .num_revs              = ARRAY_SIZE(stm32_495_revs),
 260           .device_str            = "STM32WB5x",
 261           .max_flash_size_kb     = 1024,
 262           .has_dual_bank         = false,
 263           .flash_regs_base       = 0x58004000,
 264           .fsize_addr            = 0x1FFF75E0,
 265         },
 266 };
 267
 268 /* flash bank stm32l4x <base> <size> 0 0 <target#> */
 269 FLASH_BANK_COMMAND_HANDLER(stm32l4_flash_bank_command)
 270 {
 271         struct stm32l4_flash_bank *stm32l4_info;
 272
 273         if (CMD_ARGC < 6)
 274                 return ERROR_COMMAND_SYNTAX_ERROR;
 275
 276         stm32l4_info = malloc(sizeof(struct stm32l4_flash_bank));
 277         if (!stm32l4_info)
 278                 return ERROR_FAIL; /* Checkme: What better error to use?*/
 279         bank->driver_priv = stm32l4_info;
 280
 281         /* The flash write must be aligned to a double word (8-bytes) boundary.
 282          * Ask the flash infrastructure to ensure required alignment */
 283         bank->write_start_alignment = bank->write_end_alignment = 8;
 284
 285         stm32l4_info->probed = 0;
 286
 287         return ERROR_OK;
 288 }
 289
 290 static inline uint32_t stm32l4_get_flash_reg(struct flash_bank *bank, uint32_t reg_offset)
 291 {
 292         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 293         return stm32l4_info->part_info->flash_regs_base + reg_offset;
 294 }
 295
 296 static inline int stm32l4_read_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t *value)
 297 {
 298         return target_read_u32(bank->target, stm32l4_get_flash_reg(bank, reg_offset), value);
 299 }
 300
 301 static inline int stm32l4_write_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t value)
 302 {
 303         return target_write_u32(bank->target, stm32l4_get_flash_reg(bank, reg_offset), value);
 304 }
 305
 306 static int stm32l4_wait_status_busy(struct flash_bank *bank, int timeout)
 307 {
 308         uint32_t status;
 309         int retval = ERROR_OK;
 310
 311         /* wait for busy to clear */
 312         for (;;) {
 313                 retval = stm32l4_read_flash_reg(bank, STM32_FLASH_SR, &status);
 314                 if (retval != ERROR_OK)
 315                         return retval;
 316                 LOG_DEBUG("status: 0x%" PRIx32 "", status);
 317                 if ((status & FLASH_BSY) == 0)
 318                         break;
 319                 if (timeout-- <= 0) {
 320                         LOG_ERROR("timed out waiting for flash");
 321                         return ERROR_FAIL;
 322                 }
 323                 alive_sleep(1);
 324         }
 325
 326
 327         if (status & FLASH_WRPERR) {
 328                 LOG_ERROR("stm32x device protected");
 329                 retval = ERROR_FAIL;
 330         }
 331
 332         /* Clear but report errors */
 333         if (status & FLASH_ERROR) {
 334                 if (retval == ERROR_OK)
 335                         retval = ERROR_FAIL;
 336                 /* If this operation fails, we ignore it and report the original
 337                  * retval
 338                  */
 339                 stm32l4_write_flash_reg(bank, STM32_FLASH_SR, status & FLASH_ERROR);
 340         }
 341
 342         return retval;
 343 }
 344
 345 static int stm32l4_unlock_reg(struct flash_bank *bank)
 346 {
 347         uint32_t ctrl;
 348
 349         /* first check if not already unlocked
 350          * otherwise writing on STM32_FLASH_KEYR will fail
 351          */
 352         int retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
 353         if (retval != ERROR_OK)
 354                 return retval;
 355
 356         if ((ctrl & FLASH_LOCK) == 0)
 357                 return ERROR_OK;
 358
 359         /* unlock flash registers */
 360         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_KEYR, KEY1);
 361         if (retval != ERROR_OK)
 362                 return retval;
 363
 364         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_KEYR, KEY2);
 365         if (retval != ERROR_OK)
 366                 return retval;
 367
 368         retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
 369         if (retval != ERROR_OK)
 370                 return retval;
 371
 372         if (ctrl & FLASH_LOCK) {
 373                 LOG_ERROR("flash not unlocked STM32_FLASH_CR: %" PRIx32, ctrl);
 374                 return ERROR_TARGET_FAILURE;
 375         }
 376
 377         return ERROR_OK;
 378 }
 379
 380 static int stm32l4_unlock_option_reg(struct flash_bank *bank)
 381 {
 382         uint32_t ctrl;
 383
 384         int retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
 385         if (retval != ERROR_OK)
 386                 return retval;
 387
 388         if ((ctrl & FLASH_OPTLOCK) == 0)
 389                 return ERROR_OK;
 390
 391         /* unlock option registers */
 392         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_OPTKEYR, OPTKEY1);
 393         if (retval != ERROR_OK)
 394                 return retval;
 395
 396         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_OPTKEYR, OPTKEY2);
 397         if (retval != ERROR_OK)
 398                 return retval;
 399
 400         retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
 401         if (retval != ERROR_OK)
 402                 return retval;
 403
 404         if (ctrl & FLASH_OPTLOCK) {
 405                 LOG_ERROR("options not unlocked STM32_FLASH_CR: %" PRIx32, ctrl);
 406                 return ERROR_TARGET_FAILURE;
 407         }
 408
 409         return ERROR_OK;
 410 }
 411
 412 static int stm32l4_write_option(struct flash_bank *bank, uint32_t reg_offset, uint32_t value, uint32_t mask)
 413 {
 414         uint32_t optiondata;
 415         int retval, retval2;
 416
 417         retval = stm32l4_read_flash_reg(bank, reg_offset, &optiondata);
 418         if (retval != ERROR_OK)
 419                 return retval;
 420
 421         retval = stm32l4_unlock_reg(bank);
 422         if (retval != ERROR_OK)
 423                 goto err_lock;
 424
 425         retval = stm32l4_unlock_option_reg(bank);
 426         if (retval != ERROR_OK)
 427                 goto err_lock;
 428
 429         optiondata = (optiondata & ~mask) | (value & mask);
 430
 431         retval = stm32l4_write_flash_reg(bank, reg_offset, optiondata);
 432         if (retval != ERROR_OK)
 433                 goto err_lock;
 434
 435         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_OPTSTRT);
 436         if (retval != ERROR_OK)
 437                 goto err_lock;
 438
 439         retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
 440
 441 err_lock:
 442         retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK | FLASH_OPTLOCK);
 443
 444         if (retval != ERROR_OK)
 445                 return retval;
 446
 447         return retval2;
 448 }
 449
 450 static int stm32l4_protect_check(struct flash_bank *bank)
 451 {
 452         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 453
 454         uint32_t wrp1ar, wrp1br, wrp2ar, wrp2br;
 455         stm32l4_read_flash_reg(bank, STM32_FLASH_WRP1AR, &wrp1ar);
 456         stm32l4_read_flash_reg(bank, STM32_FLASH_WRP1BR, &wrp1br);
 457         stm32l4_read_flash_reg(bank, STM32_FLASH_WRP2AR, &wrp2ar);
 458         stm32l4_read_flash_reg(bank, STM32_FLASH_WRP2BR, &wrp2br);
 459
 460         const uint8_t wrp1a_start = wrp1ar & 0xFF;
 461         const uint8_t wrp1a_end = (wrp1ar >> 16) & 0xFF;
 462         const uint8_t wrp1b_start = wrp1br & 0xFF;
 463         const uint8_t wrp1b_end = (wrp1br >> 16) & 0xFF;
 464         const uint8_t wrp2a_start = wrp2ar & 0xFF;
 465         const uint8_t wrp2a_end = (wrp2ar >> 16) & 0xFF;
 466         const uint8_t wrp2b_start = wrp2br & 0xFF;
 467         const uint8_t wrp2b_end = (wrp2br >> 16) & 0xFF;
 468
 469         for (int i = 0; i < bank->num_sectors; i++) {
 470                 if (i < stm32l4_info->bank1_sectors) {
 471                         if (((i >= wrp1a_start) &&
 472                                  (i <= wrp1a_end)) ||
 473                                 ((i >= wrp1b_start) &&
 474                                  (i <= wrp1b_end)))
 475                                 bank->sectors[i].is_protected = 1;
 476                         else
 477                                 bank->sectors[i].is_protected = 0;
 478                 } else {
 479                         uint8_t snb;
 480                         snb = i - stm32l4_info->bank1_sectors;
 481                         if (((snb >= wrp2a_start) &&
 482                                  (snb <= wrp2a_end)) ||
 483                                 ((snb >= wrp2b_start) &&
 484                                  (snb <= wrp2b_end)))
 485                                 bank->sectors[i].is_protected = 1;
 486                         else
 487                                 bank->sectors[i].is_protected = 0;
 488                 }
 489         }
 490         return ERROR_OK;
 491 }
 492
 493 static int stm32l4_erase(struct flash_bank *bank, int first, int last)
 494 {
 495         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 496         int i;
 497         int retval, retval2;
 498
 499         assert(first < bank->num_sectors);
 500         assert(last < bank->num_sectors);
 501
 502         if (bank->target->state != TARGET_HALTED) {
 503                 LOG_ERROR("Target not halted");
 504                 return ERROR_TARGET_NOT_HALTED;
 505         }
 506
 507         retval = stm32l4_unlock_reg(bank);
 508         if (retval != ERROR_OK)
 509                 goto err_lock;
 510
 511         /*
 512         Sector Erase
 513         To erase a sector, follow the procedure below:
 514         1. Check that no Flash memory operation is ongoing by
 515        checking the BSY bit in the FLASH_SR register
 516         2. Set the PER bit and select the page and bank
 517            you wish to erase in the FLASH_CR register
 518         3. Set the STRT bit in the FLASH_CR register
 519         4. Wait for the BSY bit to be cleared
 520          */
 521
 522         for (i = first; i <= last; i++) {
 523                 uint32_t erase_flags;
 524                 erase_flags = FLASH_PER | FLASH_STRT;
 525
 526                 if (i >= stm32l4_info->bank1_sectors) {
 527                         uint8_t snb;
 528                         snb = i - stm32l4_info->bank1_sectors;
 529                         erase_flags |= snb << FLASH_PAGE_SHIFT | FLASH_CR_BKER;
 530                 } else
 531                         erase_flags |= i << FLASH_PAGE_SHIFT;
 532                 retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, erase_flags);
 533                 if (retval != ERROR_OK)
 534                         break;
 535
 536                 retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
 537                 if (retval != ERROR_OK)
 538                         break;
 539
 540                 bank->sectors[i].is_erased = 1;
 541         }
 542
 543 err_lock:
 544         retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
 545
 546         if (retval != ERROR_OK)
 547                 return retval;
 548
 549         return retval2;
 550 }
 551
 552 static int stm32l4_protect(struct flash_bank *bank, int set, int first, int last)
 553 {
 554         struct target *target = bank->target;
 555         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 556
 557         if (target->state != TARGET_HALTED) {
 558                 LOG_ERROR("Target not halted");
 559                 return ERROR_TARGET_NOT_HALTED;
 560         }
 561
 562         int ret = ERROR_OK;
 563         /* Bank 2 */
 564         uint32_t reg_value = 0xFF; /* Default to bank un-protected */
 565         if (last >= stm32l4_info->bank1_sectors) {
 566                 if (set == 1) {
 567                         uint8_t begin = first > stm32l4_info->bank1_sectors ? first : 0x00;
 568                         reg_value = ((last & 0xFF) << 16) | begin;
 569                 }
 570
 571                 ret = stm32l4_write_option(bank, STM32_FLASH_WRP2AR, reg_value, 0xffffffff);
 572         }
 573         /* Bank 1 */
 574         reg_value = 0xFF; /* Default to bank un-protected */
 575         if (first < stm32l4_info->bank1_sectors) {
 576                 if (set == 1) {
 577                         uint8_t end = last >= stm32l4_info->bank1_sectors ? 0xFF : last;
 578                         reg_value = (end << 16) | (first & 0xFF);
 579                 }
 580
 581                 ret = stm32l4_write_option(bank, STM32_FLASH_WRP1AR, reg_value, 0xffffffff);
 582         }
 583
 584         return ret;
 585 }
 586
 587 /* Count is in double-words */
 588 static int stm32l4_write_block(struct flash_bank *bank, const uint8_t *buffer,
 589                 uint32_t offset, uint32_t count)
 590 {
 591         struct target *target = bank->target;
 592         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 593         uint32_t buffer_size = 16384;
 594         struct working_area *write_algorithm;
 595         struct working_area *source;
 596         uint32_t address = bank->base + offset;
 597         struct reg_param reg_params[5];
 598         struct armv7m_algorithm armv7m_info;
 599         int retval = ERROR_OK;
 600
 601         static const uint8_t stm32l4_flash_write_code[] = {
 602 #include "../../../contrib/loaders/flash/stm32/stm32l4x.inc"
 603         };
 604
 605         if (target_alloc_working_area(target, sizeof(stm32l4_flash_write_code),
 606                         &write_algorithm) != ERROR_OK) {
 607                 LOG_WARNING("no working area available, can't do block memory writes");
 608                 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 609         }
 610
 611         retval = target_write_buffer(target, write_algorithm->address,
 612                         sizeof(stm32l4_flash_write_code),
 613                         stm32l4_flash_write_code);
 614         if (retval != ERROR_OK) {
 615                 target_free_working_area(target, write_algorithm);
 616                 return retval;
 617         }
 618
 619         /* memory buffer */
 620         while (target_alloc_working_area_try(target, buffer_size, &source) !=
 621                    ERROR_OK) {
 622                 buffer_size /= 2;
 623                 if (buffer_size <= 256) {
 624                         /* we already allocated the writing code, but failed to get a
 625                          * buffer, free the algorithm */
 626                         target_free_working_area(target, write_algorithm);
 627
 628                         LOG_WARNING("large enough working area not available, can't do block memory writes");
 629                         return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 630                 }
 631         }
 632
 633         armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
 634         armv7m_info.core_mode = ARM_MODE_THREAD;
 635
 636         init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
 637         init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);    /* buffer end */
 638         init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);    /* target address */
 639         init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);    /* count (double word-64bit) */
 640         init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT);    /* flash regs base */
 641
 642         buf_set_u32(reg_params[0].value, 0, 32, source->address);
 643         buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
 644         buf_set_u32(reg_params[2].value, 0, 32, address);
 645         buf_set_u32(reg_params[3].value, 0, 32, count);
 646         buf_set_u32(reg_params[4].value, 0, 32, stm32l4_info->part_info->flash_regs_base);
 647
 648         retval = target_run_flash_async_algorithm(target, buffer, count, 8,
 649                         0, NULL,
 650                         5, reg_params,
 651                         source->address, source->size,
 652                         write_algorithm->address, 0,
 653                         &armv7m_info);
 654
 655         if (retval == ERROR_FLASH_OPERATION_FAILED) {
 656                 LOG_ERROR("error executing stm32l4 flash write algorithm");
 657
 658                 uint32_t error = buf_get_u32(reg_params[0].value, 0, 32) & FLASH_ERROR;
 659
 660                 if (error & FLASH_WRPERR)
 661                         LOG_ERROR("flash memory write protected");
 662
 663                 if (error != 0) {
 664                         LOG_ERROR("flash write failed = %08" PRIx32, error);
 665                         /* Clear but report errors */
 666                         stm32l4_write_flash_reg(bank, STM32_FLASH_SR, error);
 667                         retval = ERROR_FAIL;
 668                 }
 669         }
 670
 671         target_free_working_area(target, source);
 672         target_free_working_area(target, write_algorithm);
 673
 674         destroy_reg_param(&reg_params[0]);
 675         destroy_reg_param(&reg_params[1]);
 676         destroy_reg_param(&reg_params[2]);
 677         destroy_reg_param(&reg_params[3]);
 678         destroy_reg_param(&reg_params[4]);
 679
 680         return retval;
 681 }
 682
 683 static int stm32l4_write(struct flash_bank *bank, const uint8_t *buffer,
 684                 uint32_t offset, uint32_t count)
 685 {
 686         int retval, retval2;
 687
 688         if (bank->target->state != TARGET_HALTED) {
 689                 LOG_ERROR("Target not halted");
 690                 return ERROR_TARGET_NOT_HALTED;
 691         }
 692
 693         /* The flash write must be aligned to a double word (8-bytes) boundary.
 694          * The flash infrastructure ensures it, do just a security check */
 695         assert(offset % 8 == 0);
 696         assert(count % 8 == 0);
 697
 698         retval = stm32l4_unlock_reg(bank);
 699         if (retval != ERROR_OK)
 700                 goto err_lock;
 701
 702         retval = stm32l4_write_block(bank, buffer, offset, count / 8);
 703
 704 err_lock:
 705         retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
 706
 707         if (retval != ERROR_OK) {
 708                 LOG_ERROR("block write failed");
 709                 return retval;
 710         }
 711         return retval2;
 712 }
 713
 714 static int stm32l4_read_idcode(struct flash_bank *bank, uint32_t *id)
 715 {
 716         int retval = target_read_u32(bank->target, DBGMCU_IDCODE, id);
 717         if (retval != ERROR_OK)
 718                 return retval;
 719
 720         return retval;
 721 }
 722
 723 static int stm32l4_probe(struct flash_bank *bank)
 724 {
 725         struct target *target = bank->target;
 726         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 727         const struct stm32l4_part_info *part_info;
 728         int i;
 729         uint16_t flash_size_in_kb = 0xffff;
 730         uint32_t device_id;
 731         uint32_t options;
 732
 733         stm32l4_info->probed = 0;
 734
 735         /* read stm32 device id register */
 736         int retval = stm32l4_read_idcode(bank, &stm32l4_info->idcode);
 737         if (retval != ERROR_OK)
 738                 return retval;
 739
 740         device_id = stm32l4_info->idcode & 0xFFF;
 741
 742         for (unsigned int n = 0; n < ARRAY_SIZE(stm32l4_parts); n++) {
 743                 if (device_id == stm32l4_parts[n].id)
 744                         stm32l4_info->part_info = &stm32l4_parts[n];
 745         }
 746
 747         if (!stm32l4_info->part_info) {
 748                 LOG_WARNING("Cannot identify target as an STM32 L4 or WB family device.");
 749                 return ERROR_FAIL;
 750         }
 751
 752         part_info = stm32l4_info->part_info;
 753
 754         char device_info[1024];
 755         retval = bank->driver->info(bank, device_info, sizeof(device_info));
 756         if (retval != ERROR_OK)
 757                 return retval;
 758
 759         LOG_INFO("device idcode = 0x%08" PRIx32 " (%s)", stm32l4_info->idcode, device_info);
 760
 761         /* get flash size from target. */
 762         retval = target_read_u16(target, part_info->fsize_addr, &flash_size_in_kb);
 763
 764         /* failed reading flash size or flash size invalid (early silicon),
 765          * default to max target family */
 766         if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0
 767                         || flash_size_in_kb > part_info->max_flash_size_kb) {
 768                 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
 769                         part_info->max_flash_size_kb);
 770                 flash_size_in_kb = part_info->max_flash_size_kb;
 771         }
 772
 773         LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
 774
 775         /* did we assign a flash size? */
 776         assert((flash_size_in_kb != 0xffff) && flash_size_in_kb);
 777
 778         /* read flash option register */
 779         retval = stm32l4_read_flash_reg(bank, STM32_FLASH_OPTR, &options);
 780         if (retval != ERROR_OK)
 781                 return retval;
 782
 783         stm32l4_info->bank1_sectors = 0;
 784         stm32l4_info->hole_sectors = 0;
 785
 786         int num_pages = 0;
 787         int page_size = 0;
 788
 789         stm32l4_info->dual_bank_mode = false;
 790
 791         switch (device_id) {
 792         case 0x415:
 793         case 0x461:
 794                 /* if flash size is max (1M) the device is always dual bank
 795                  * 0x415: has variants with 512K
 796                  * 0x461: has variants with 512 and 256
 797                  * for these variants:
 798                  *   if DUAL_BANK = 0 -> single bank
 799                  *   else -> dual bank without gap
 800                  * note: the page size is invariant
 801                  */
 802                 page_size = 2048;
 803                 num_pages = flash_size_in_kb / 2;
 804                 stm32l4_info->bank1_sectors = num_pages;
 805
 806                 /* check DUAL_BANK bit[21] if the flash is less than 1M */
 807                 if (flash_size_in_kb == 1024 || (options & BIT(21))) {
 808                         stm32l4_info->dual_bank_mode = true;
 809                         stm32l4_info->bank1_sectors = num_pages / 2;
 810                 }
 811                 break;
 812         case 0x435:
 813         case 0x462:
 814         case 0x464:
 815                 /* single bank flash */
 816                 page_size = 2048;
 817                 num_pages = flash_size_in_kb / 2;
 818                 stm32l4_info->bank1_sectors = num_pages;
 819                 break;
 820         case 0x470:
 821         case 0x471:
 822                 /* STM32L4R/S can be single/dual bank:
 823                  *   if size = 2M check DBANK bit(22)
 824                  *   if size = 1M check DB1M bit(21)
 825                  * STM32L4P/Q can be single/dual bank
 826                  *   if size = 1M check DBANK bit(22)
 827                  *   if size = 512K check DB512K bit(21)
 828                  * in single bank configuration the page size is 8K
 829                  * else (dual bank) the page size is 4K without gap between banks
 830                  */
 831                 page_size = 8192;
 832                 num_pages = flash_size_in_kb / 8;
 833                 stm32l4_info->bank1_sectors = num_pages;
 834                 const bool use_dbank_bit = flash_size_in_kb == part_info->max_flash_size_kb;
 835                 if ((use_dbank_bit && (options & BIT(22))) ||
 836                         (!use_dbank_bit && (options & BIT(21)))) {
 837                         stm32l4_info->dual_bank_mode = true;
 838                         page_size = 4096;
 839                         num_pages = flash_size_in_kb / 4;
 840                         stm32l4_info->bank1_sectors = num_pages / 2;
 841                 }
 842                 break;
 843         case 0x495:
 844                 /* single bank flash */
 845                 page_size = 4096;
 846                 num_pages = flash_size_in_kb / 4;
 847                 stm32l4_info->bank1_sectors = num_pages;
 848                 break;
 849         default:
 850                 LOG_ERROR("unsupported device");
 851                 return ERROR_FAIL;
 852         }
 853
 854         LOG_INFO("flash mode : %s-bank", stm32l4_info->dual_bank_mode ? "dual" : "single");
 855
 856         const int gap_size = stm32l4_info->hole_sectors * page_size;
 857
 858         if (stm32l4_info->dual_bank_mode & gap_size) {
 859                 LOG_INFO("gap detected starting from %0x08" PRIx32 " to %0x08" PRIx32,
 860                                 0x8000000 + stm32l4_info->bank1_sectors * page_size,
 861                                 0x8000000 + stm32l4_info->bank1_sectors * page_size + gap_size);
 862         }
 863
 864         if (bank->sectors) {
 865                 free(bank->sectors);
 866                 bank->sectors = NULL;
 867         }
 868
 869         bank->size = flash_size_in_kb * 1024 + gap_size;
 870         bank->base = 0x08000000;
 871         bank->num_sectors = num_pages;
 872         bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
 873         if (bank->sectors == NULL) {
 874                 LOG_ERROR("failed to allocate bank sectors");
 875                 return ERROR_FAIL;
 876         }
 877
 878         for (i = 0; i < bank->num_sectors; i++) {
 879                 bank->sectors[i].offset = i * page_size;
 880                 /* in dual bank configuration, if there is a gap between banks
 881                  * we fix up the sector offset to consider this gap */
 882                 if (i >= stm32l4_info->bank1_sectors && stm32l4_info->hole_sectors)
 883                         bank->sectors[i].offset += gap_size;
 884                 bank->sectors[i].size = page_size;
 885                 bank->sectors[i].is_erased = -1;
 886                 bank->sectors[i].is_protected = 1;
 887         }
 888
 889         stm32l4_info->probed = 1;
 890         return ERROR_OK;
 891 }
 892
 893 static int stm32l4_auto_probe(struct flash_bank *bank)
 894 {
 895         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 896         if (stm32l4_info->probed)
 897                 return ERROR_OK;
 898
 899         return stm32l4_probe(bank);
 900 }
 901
 902 static int get_stm32l4_info(struct flash_bank *bank, char *buf, int buf_size)
 903 {
 904         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 905         const struct stm32l4_part_info *part_info = stm32l4_info->part_info;
 906
 907         if (part_info) {
 908                 const char *rev_str = NULL;
 909                 uint16_t rev_id = stm32l4_info->idcode >> 16;
 910                 for (unsigned int i = 0; i < part_info->num_revs; i++) {
 911                         if (rev_id == part_info->revs[i].rev) {
 912                                 rev_str = part_info->revs[i].str;
 913
 914                                 if (rev_str != NULL) {
 915                                         snprintf(buf, buf_size, "%s - Rev: %s",
 916                                                         part_info->device_str, rev_str);
 917                                         return ERROR_OK;
 918                                 }
 919                         }
 920                 }
 921
 922                 snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)",
 923                                 part_info->device_str, rev_id);
 924                 return ERROR_OK;
 925         } else {
 926                 snprintf(buf, buf_size, "Cannot identify target as an STM32 L4 or WB device");
 927                 return ERROR_FAIL;
 928         }
 929
 930         return ERROR_OK;
 931 }
 932
 933 static int stm32l4_mass_erase(struct flash_bank *bank)
 934 {
 935         int retval, retval2;
 936         struct target *target = bank->target;
 937         struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
 938
 939         uint32_t action = FLASH_MER1;
 940
 941         if (stm32l4_info->part_info->has_dual_bank)
 942                 action |= FLASH_MER2;
 943
 944         if (target->state != TARGET_HALTED) {
 945                 LOG_ERROR("Target not halted");
 946                 return ERROR_TARGET_NOT_HALTED;
 947         }
 948
 949         retval = stm32l4_unlock_reg(bank);
 950         if (retval != ERROR_OK)
 951                 goto err_lock;
 952
 953         /* mass erase flash memory */
 954         retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT / 10);
 955         if (retval != ERROR_OK)
 956                 goto err_lock;
 957
 958         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, action);
 959         if (retval != ERROR_OK)
 960                 goto err_lock;
 961
 962         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, action | FLASH_STRT);
 963         if (retval != ERROR_OK)
 964                 goto err_lock;
 965
 966         retval = stm32l4_wait_status_busy(bank,  FLASH_ERASE_TIMEOUT);
 967
 968 err_lock:
 969         retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
 970
 971         if (retval != ERROR_OK)
 972                 return retval;
 973
 974         return retval2;
 975 }
 976
 977 COMMAND_HANDLER(stm32l4_handle_mass_erase_command)
 978 {
 979         int i;
 980
 981         if (CMD_ARGC < 1) {
 982                 command_print(CMD, "stm32l4x mass_erase <STM32L4 bank>");
 983                 return ERROR_COMMAND_SYNTAX_ERROR;
 984         }
 985
 986         struct flash_bank *bank;
 987         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
 988         if (ERROR_OK != retval)
 989                 return retval;
 990
 991         retval = stm32l4_mass_erase(bank);
 992         if (retval == ERROR_OK) {
 993                 /* set all sectors as erased */
 994                 for (i = 0; i < bank->num_sectors; i++)
 995                         bank->sectors[i].is_erased = 1;
 996
 997                 command_print(CMD, "stm32l4x mass erase complete");
 998         } else {
 999                 command_print(CMD, "stm32l4x mass erase failed");
1000         }
1001
1002         return retval;
1003 }
1004
1005 COMMAND_HANDLER(stm32l4_handle_option_read_command)
1006 {
1007         if (CMD_ARGC < 2) {
1008                 command_print(CMD, "stm32l4x option_read <STM32L4 bank> <option_reg offset>");
1009                 return ERROR_COMMAND_SYNTAX_ERROR;
1010         }
1011
1012         struct flash_bank *bank;
1013         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1014         if (ERROR_OK != retval)
1015                 return retval;
1016
1017         uint32_t reg_offset, reg_addr;
1018         uint32_t value = 0;
1019
1020         reg_offset = strtoul(CMD_ARGV[1], NULL, 16);
1021         reg_addr = stm32l4_get_flash_reg(bank, reg_offset);
1022
1023         retval = stm32l4_read_flash_reg(bank, reg_offset, &value);
1024         if (ERROR_OK != retval)
1025                 return retval;
1026
1027         command_print(CMD, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value);
1028
1029         return retval;
1030 }
1031
1032 COMMAND_HANDLER(stm32l4_handle_option_write_command)
1033 {
1034         if (CMD_ARGC < 3) {
1035                 command_print(CMD, "stm32l4x option_write <STM32L4 bank> <option_reg offset> <value> [mask]");
1036                 return ERROR_COMMAND_SYNTAX_ERROR;
1037         }
1038
1039         struct flash_bank *bank;
1040         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1041         if (ERROR_OK != retval)
1042                 return retval;
1043
1044         uint32_t reg_offset;
1045         uint32_t value = 0;
1046         uint32_t mask = 0xFFFFFFFF;
1047
1048         reg_offset = strtoul(CMD_ARGV[1], NULL, 16);
1049         value = strtoul(CMD_ARGV[2], NULL, 16);
1050         if (CMD_ARGC > 3)
1051                 mask = strtoul(CMD_ARGV[3], NULL, 16);
1052
1053         command_print(CMD, "%s Option written.\n"
1054                                 "INFO: a reset or power cycle is required "
1055                                 "for the new settings to take effect.", bank->driver->name);
1056
1057         retval = stm32l4_write_option(bank, reg_offset, value, mask);
1058         return retval;
1059 }
1060
1061 COMMAND_HANDLER(stm32l4_handle_option_load_command)
1062 {
1063         if (CMD_ARGC < 1)
1064                 return ERROR_COMMAND_SYNTAX_ERROR;
1065
1066         struct flash_bank *bank;
1067         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1068         if (ERROR_OK != retval)
1069                 return retval;
1070
1071         retval = stm32l4_unlock_reg(bank);
1072         if (ERROR_OK != retval)
1073                 return retval;
1074
1075         retval = stm32l4_unlock_option_reg(bank);
1076         if (ERROR_OK != retval)
1077                 return retval;
1078
1079         /* Write the OBLLAUNCH bit in CR -> Cause device "POR" and option bytes reload */
1080         retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_OBLLAUNCH);
1081
1082         command_print(CMD, "stm32l4x option load (POR) completed.");
1083         return retval;
1084 }
1085
1086 COMMAND_HANDLER(stm32l4_handle_lock_command)
1087 {
1088         struct target *target = NULL;
1089
1090         if (CMD_ARGC < 1)
1091                 return ERROR_COMMAND_SYNTAX_ERROR;
1092
1093         struct flash_bank *bank;
1094         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1095         if (ERROR_OK != retval)
1096                 return retval;
1097
1098         target = bank->target;
1099
1100         if (target->state != TARGET_HALTED) {
1101                 LOG_ERROR("Target not halted");
1102                 return ERROR_TARGET_NOT_HALTED;
1103         }
1104
1105         /* set readout protection level 1 by erasing the RDP option byte */
1106         if (stm32l4_write_option(bank, STM32_FLASH_OPTR, 0, 0x000000FF) != ERROR_OK) {
1107                 command_print(CMD, "%s failed to lock device", bank->driver->name);
1108                 return ERROR_OK;
1109         }
1110
1111         return ERROR_OK;
1112 }
1113
1114 COMMAND_HANDLER(stm32l4_handle_unlock_command)
1115 {
1116         struct target *target = NULL;
1117
1118         if (CMD_ARGC < 1)
1119                 return ERROR_COMMAND_SYNTAX_ERROR;
1120
1121         struct flash_bank *bank;
1122         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1123         if (ERROR_OK != retval)
1124                 return retval;
1125
1126         target = bank->target;
1127
1128         if (target->state != TARGET_HALTED) {
1129                 LOG_ERROR("Target not halted");
1130                 return ERROR_TARGET_NOT_HALTED;
1131         }
1132
1133         if (stm32l4_write_option(bank, STM32_FLASH_OPTR, RDP_LEVEL_0, 0x000000FF) != ERROR_OK) {
1134                 command_print(CMD, "%s failed to unlock device", bank->driver->name);
1135                 return ERROR_OK;
1136         }
1137
1138         return ERROR_OK;
1139 }
1140
1141 static const struct command_registration stm32l4_exec_command_handlers[] = {
1142         {
1143                 .name = "lock",
1144                 .handler = stm32l4_handle_lock_command,
1145                 .mode = COMMAND_EXEC,
1146                 .usage = "bank_id",
1147                 .help = "Lock entire flash device.",
1148         },
1149         {
1150                 .name = "unlock",
1151                 .handler = stm32l4_handle_unlock_command,
1152                 .mode = COMMAND_EXEC,
1153                 .usage = "bank_id",
1154                 .help = "Unlock entire protected flash device.",
1155         },
1156         {
1157                 .name = "mass_erase",
1158                 .handler = stm32l4_handle_mass_erase_command,
1159                 .mode = COMMAND_EXEC,
1160                 .usage = "bank_id",
1161                 .help = "Erase entire flash device.",
1162         },
1163         {
1164                 .name = "option_read",
1165                 .handler = stm32l4_handle_option_read_command,
1166                 .mode = COMMAND_EXEC,
1167                 .usage = "bank_id reg_offset",
1168                 .help = "Read & Display device option bytes.",
1169         },
1170         {
1171                 .name = "option_write",
1172                 .handler = stm32l4_handle_option_write_command,
1173                 .mode = COMMAND_EXEC,
1174                 .usage = "bank_id reg_offset value mask",
1175                 .help = "Write device option bit fields with provided value.",
1176         },
1177         {
1178                 .name = "option_load",
1179                 .handler = stm32l4_handle_option_load_command,
1180                 .mode = COMMAND_EXEC,
1181                 .usage = "bank_id",
1182                 .help = "Force re-load of device options (will cause device reset).",
1183         },
1184         COMMAND_REGISTRATION_DONE
1185 };
1186
1187 static const struct command_registration stm32l4_command_handlers[] = {
1188         {
1189                 .name = "stm32l4x",
1190                 .mode = COMMAND_ANY,
1191                 .help = "stm32l4x flash command group",
1192                 .usage = "",
1193                 .chain = stm32l4_exec_command_handlers,
1194         },
1195         COMMAND_REGISTRATION_DONE
1196 };
1197
1198 const struct flash_driver stm32l4x_flash = {
1199         .name = "stm32l4x",
1200         .commands = stm32l4_command_handlers,
1201         .flash_bank_command = stm32l4_flash_bank_command,
1202         .erase = stm32l4_erase,
1203         .protect = stm32l4_protect,
1204         .write = stm32l4_write,
1205         .read = default_flash_read,
1206         .probe = stm32l4_probe,
1207         .auto_probe = stm32l4_auto_probe,
1208         .erase_check = default_flash_blank_check,
1209         .protect_check = stm32l4_protect_check,
1210         .info = get_stm32l4_info,
1211         .free_driver_priv = default_flash_free_driver_priv,
1212 };