1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * LPC1700 support Copyright (C) 2009 by Audrius Urmanavicius *
6 * didele.deze@gmail.com *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
22 ***************************************************************************/
29 #include <helper/binarybuffer.h>
30 #include <target/algorithm.h>
31 #include <target/arm_opcodes.h>
32 #include <target/armv7m.h>
36 * flash programming support for NXP LPC17xx and LPC2xxx devices.
38 * @todo Provide a way to update CCLK after declaring the flash bank.
39 * The value which is correct after chip reset will rarely still work
40 * right after the clocks switch to use the PLL (e.g. 4MHz --> 100 MHz).
43 * currently supported devices:
44 * variant 1 (lpc2000_v1):
52 * variant 2 (lpc2000_v2):
61 * - 176x (tested with LPC1768)
70 struct lpc2000_flash_bank {
71 lpc2000_variant variant;
72 struct working_area *iap_working_area;
74 int cmd51_dst_boundary;
78 uint32_t cmd51_max_buffer;
82 enum lpc2000_status_codes {
83 LPC2000_CMD_SUCCESS = 0,
84 LPC2000_INVALID_COMMAND = 1,
85 LPC2000_SRC_ADDR_ERROR = 2,
86 LPC2000_DST_ADDR_ERROR = 3,
87 LPC2000_SRC_ADDR_NOT_MAPPED = 4,
88 LPC2000_DST_ADDR_NOT_MAPPED = 5,
89 LPC2000_COUNT_ERROR = 6,
90 LPC2000_INVALID_SECTOR = 7,
91 LPC2000_SECTOR_NOT_BLANK = 8,
92 LPC2000_SECTOR_NOT_PREPARED = 9,
93 LPC2000_COMPARE_ERROR = 10,
95 LPC2000_PARAM_ERROR = 12,
96 LPC2000_ADDR_ERROR = 13,
97 LPC2000_ADDR_NOT_MAPPED = 14,
98 LPC2000_CMD_NOT_LOCKED = 15,
99 LPC2000_INVALID_CODE = 16,
100 LPC2000_INVALID_BAUD_RATE = 17,
101 LPC2000_INVALID_STOP_BIT = 18,
102 LPC2000_CRP_ENABLED = 19
105 static int lpc2000_build_sector_list(struct flash_bank *bank)
107 struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
111 /* default to a 4096 write buffer */
112 lpc2000_info->cmd51_max_buffer = 4096;
114 if (lpc2000_info->variant == lpc2000_v1) {
115 /* variant 1 has different layout for 128kb and 256kb flashes */
116 if (bank->size == 128 * 1024) {
117 bank->num_sectors = 16;
118 bank->sectors = malloc(sizeof(struct flash_sector) * 16);
119 for (i = 0; i < 16; i++) {
120 bank->sectors[i].offset = offset;
121 bank->sectors[i].size = 8 * 1024;
122 offset += bank->sectors[i].size;
123 bank->sectors[i].is_erased = -1;
124 bank->sectors[i].is_protected = 1;
126 } else if (bank->size == 256 * 1024) {
127 bank->num_sectors = 18;
128 bank->sectors = malloc(sizeof(struct flash_sector) * 18);
130 for (i = 0; i < 8; i++) {
131 bank->sectors[i].offset = offset;
132 bank->sectors[i].size = 8 * 1024;
133 offset += bank->sectors[i].size;
134 bank->sectors[i].is_erased = -1;
135 bank->sectors[i].is_protected = 1;
137 for (i = 8; i < 10; i++) {
138 bank->sectors[i].offset = offset;
139 bank->sectors[i].size = 64 * 1024;
140 offset += bank->sectors[i].size;
141 bank->sectors[i].is_erased = -1;
142 bank->sectors[i].is_protected = 1;
144 for (i = 10; i < 18; i++) {
145 bank->sectors[i].offset = offset;
146 bank->sectors[i].size = 8 * 1024;
147 offset += bank->sectors[i].size;
148 bank->sectors[i].is_erased = -1;
149 bank->sectors[i].is_protected = 1;
152 LOG_ERROR("BUG: unknown bank->size encountered");
155 } else if (lpc2000_info->variant == lpc2000_v2) {
156 /* variant 2 has a uniform layout, only number of sectors differs */
157 switch (bank->size) {
159 lpc2000_info->cmd51_max_buffer = 1024;
160 bank->num_sectors = 1;
163 lpc2000_info->cmd51_max_buffer = 1024;
164 bank->num_sectors = 2;
167 bank->num_sectors = 4;
170 bank->num_sectors = 8;
173 bank->num_sectors = 9;
176 bank->num_sectors = 11;
179 bank->num_sectors = 15;
182 bank->num_sectors = 27;
186 bank->num_sectors = 28;
189 LOG_ERROR("BUG: unknown bank->size encountered");
194 bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
196 for (i = 0; i < bank->num_sectors; i++) {
198 bank->sectors[i].offset = offset;
199 bank->sectors[i].size = 4 * 1024;
200 offset += bank->sectors[i].size;
201 bank->sectors[i].is_erased = -1;
202 bank->sectors[i].is_protected = 1;
204 bank->sectors[i].offset = offset;
205 bank->sectors[i].size = 32 * 1024;
206 offset += bank->sectors[i].size;
207 bank->sectors[i].is_erased = -1;
208 bank->sectors[i].is_protected = 1;
210 bank->sectors[i].offset = offset;
211 bank->sectors[i].size = 4 * 1024;
212 offset += bank->sectors[i].size;
213 bank->sectors[i].is_erased = -1;
214 bank->sectors[i].is_protected = 1;
217 } else if (lpc2000_info->variant == lpc1700) {
218 switch (bank->size) {
220 bank->num_sectors = 8;
223 bank->num_sectors = 16;
226 bank->num_sectors = 18;
229 bank->num_sectors = 22;
232 bank->num_sectors = 30;
235 LOG_ERROR("BUG: unknown bank->size encountered");
239 bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
241 for (i = 0; i < bank->num_sectors; i++) {
242 bank->sectors[i].offset = offset;
243 /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx
245 bank->sectors[i].size = (i < 16) ? 4 * 1024 : 32 * 1024;
246 offset += bank->sectors[i].size;
247 bank->sectors[i].is_erased = -1;
248 bank->sectors[i].is_protected = 1;
251 LOG_ERROR("BUG: unknown lpc2000_info->variant encountered");
258 /* call LPC1700/LPC2000 IAP function
259 * uses 180 bytes working area
260 * 0x0 to 0x7: jump gate (BX to thumb state, b -2 to wait)
261 * 0x8 to 0x1f: command parameter table (1+5 words)
262 * 0x20 to 0x33: command result table (1+4 words)
263 * 0x34 to 0xb3: stack (only 128b needed)
265 static int lpc2000_iap_call(struct flash_bank *bank,
267 uint32_t param_table[5],
268 uint32_t result_table[4])
271 struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
272 struct target *target = bank->target;
273 struct mem_param mem_params[2];
274 struct reg_param reg_params[5];
275 struct arm_algorithm arm_algo; /* for LPC2000 */
276 struct armv7m_algorithm armv7m_info; /* for LPC1700 */
277 uint32_t status_code;
278 uint32_t iap_entry_point = 0; /* to make compiler happier */
280 /* regrab previously allocated working_area, or allocate a new one */
281 if (!lpc2000_info->iap_working_area) {
282 uint8_t jump_gate[8];
284 /* make sure we have a working area */
285 if (target_alloc_working_area(target, 180,
286 &lpc2000_info->iap_working_area) != ERROR_OK) {
287 LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
288 return ERROR_FLASH_OPERATION_FAILED;
291 /* write IAP code to working area */
292 switch (lpc2000_info->variant) {
294 target_buffer_set_u32(target, jump_gate, ARMV4_5_T_BX(12));
295 target_buffer_set_u32(target, jump_gate + 4, ARMV5_T_BKPT(0));
299 target_buffer_set_u32(target, jump_gate, ARMV4_5_BX(12));
300 target_buffer_set_u32(target, jump_gate + 4, ARMV4_5_B(0xfffffe, 0));
303 LOG_ERROR("BUG: unknown lpc2000_info->variant encountered");
307 retval = target_write_memory(target,
308 lpc2000_info->iap_working_area->address, 4, 2, jump_gate);
309 if (retval != ERROR_OK) {
311 "Write memory at address 0x%8.8" PRIx32 " failed (check work_area definition)",
312 lpc2000_info->iap_working_area->address);
317 switch (lpc2000_info->variant) {
319 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
320 armv7m_info.core_mode = ARMV7M_MODE_ANY;
321 iap_entry_point = 0x1fff1ff1;
325 arm_algo.common_magic = ARM_COMMON_MAGIC;
326 arm_algo.core_mode = ARM_MODE_SVC;
327 arm_algo.core_state = ARM_STATE_ARM;
328 iap_entry_point = 0x7ffffff1;
331 LOG_ERROR("BUG: unknown lpc2000->variant encountered");
335 /* command parameter table */
336 init_mem_param(&mem_params[0], lpc2000_info->iap_working_area->address + 8, 6 * 4,
338 target_buffer_set_u32(target, mem_params[0].value, code);
339 target_buffer_set_u32(target, mem_params[0].value + 0x04, param_table[0]);
340 target_buffer_set_u32(target, mem_params[0].value + 0x08, param_table[1]);
341 target_buffer_set_u32(target, mem_params[0].value + 0x0c, param_table[2]);
342 target_buffer_set_u32(target, mem_params[0].value + 0x10, param_table[3]);
343 target_buffer_set_u32(target, mem_params[0].value + 0x14, param_table[4]);
345 init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
346 buf_set_u32(reg_params[0].value, 0, 32, lpc2000_info->iap_working_area->address + 0x08);
348 /* command result table */
349 init_mem_param(&mem_params[1],
350 lpc2000_info->iap_working_area->address + 0x20,
354 init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
355 buf_set_u32(reg_params[1].value, 0, 32, lpc2000_info->iap_working_area->address + 0x20);
357 /* IAP entry point */
358 init_reg_param(®_params[2], "r12", 32, PARAM_OUT);
359 buf_set_u32(reg_params[2].value, 0, 32, iap_entry_point);
361 switch (lpc2000_info->variant) {
364 init_reg_param(®_params[3], "sp", 32, PARAM_OUT);
365 buf_set_u32(reg_params[3].value, 0, 32,
366 lpc2000_info->iap_working_area->address + 0xb4);
369 init_reg_param(®_params[4], "lr", 32, PARAM_OUT);
370 buf_set_u32(reg_params[4].value, 0, 32,
371 (lpc2000_info->iap_working_area->address + 0x04) | 1);
372 /* bit0 of LR = 1 to return in Thumb mode */
374 target_run_algorithm(target, 2, mem_params, 5, reg_params,
375 lpc2000_info->iap_working_area->address, 0, 10000, &armv7m_info);
380 init_reg_param(®_params[3], "sp_svc", 32, PARAM_OUT);
381 buf_set_u32(reg_params[3].value, 0, 32,
382 lpc2000_info->iap_working_area->address + 0xb4);
385 init_reg_param(®_params[4], "lr_svc", 32, PARAM_OUT);
386 buf_set_u32(reg_params[4].value, 0, 32,
387 lpc2000_info->iap_working_area->address + 0x04);
389 target_run_algorithm(target, 2, mem_params, 5, reg_params,
390 lpc2000_info->iap_working_area->address,
391 lpc2000_info->iap_working_area->address + 0x4,
395 LOG_ERROR("BUG: unknown lpc2000->variant encountered");
399 status_code = target_buffer_get_u32(target, mem_params[1].value);
400 result_table[0] = target_buffer_get_u32(target, mem_params[1].value + 0x04);
401 result_table[1] = target_buffer_get_u32(target, mem_params[1].value + 0x08);
402 result_table[2] = target_buffer_get_u32(target, mem_params[1].value + 0x0c);
403 result_table[3] = target_buffer_get_u32(target, mem_params[1].value + 0x10);
405 LOG_DEBUG("IAP command = %i (0x%8.8" PRIx32 ", 0x%8.8" PRIx32
406 ", 0x%8.8" PRIx32 ", 0x%8.8" PRIx32 ", 0x%8.8"
407 PRIx32 ") completed with result = %8.8" PRIx32,
408 code, param_table[0], param_table[1], param_table[2],
409 param_table[3], param_table[4], status_code);
411 destroy_mem_param(&mem_params[0]);
412 destroy_mem_param(&mem_params[1]);
414 destroy_reg_param(®_params[0]);
415 destroy_reg_param(®_params[1]);
416 destroy_reg_param(®_params[2]);
417 destroy_reg_param(®_params[3]);
418 destroy_reg_param(®_params[4]);
423 static int lpc2000_iap_blank_check(struct flash_bank *bank, int first, int last)
425 uint32_t param_table[5];
426 uint32_t result_table[4];
430 if ((first < 0) || (last >= bank->num_sectors))
431 return ERROR_FLASH_SECTOR_INVALID;
433 for (i = first; i <= last; i++) {
434 /* check single sector */
435 param_table[0] = param_table[1] = i;
436 status_code = lpc2000_iap_call(bank, 53, param_table, result_table);
438 switch (status_code) {
439 case ERROR_FLASH_OPERATION_FAILED:
440 return ERROR_FLASH_OPERATION_FAILED;
441 case LPC2000_CMD_SUCCESS:
442 bank->sectors[i].is_erased = 1;
444 case LPC2000_SECTOR_NOT_BLANK:
445 bank->sectors[i].is_erased = 0;
447 case LPC2000_INVALID_SECTOR:
448 bank->sectors[i].is_erased = 0;
451 return ERROR_FLASH_BUSY;
454 LOG_ERROR("BUG: unknown LPC2000 status code %i", status_code);
463 * flash bank lpc2000 <base> <size> 0 0 <target#> <lpc_variant> <cclk> [calc_checksum]
465 FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command)
467 struct lpc2000_flash_bank *lpc2000_info;
470 return ERROR_COMMAND_SYNTAX_ERROR;
472 lpc2000_info = malloc(sizeof(struct lpc2000_flash_bank));
473 bank->driver_priv = lpc2000_info;
475 if (strcmp(CMD_ARGV[6], "lpc2000_v1") == 0) {
476 lpc2000_info->variant = lpc2000_v1;
477 lpc2000_info->cmd51_dst_boundary = 512;
478 lpc2000_info->cmd51_can_256b = 0;
479 lpc2000_info->cmd51_can_8192b = 1;
480 lpc2000_info->checksum_vector = 5;
481 } else if (strcmp(CMD_ARGV[6], "lpc2000_v2") == 0) {
482 lpc2000_info->variant = lpc2000_v2;
483 lpc2000_info->cmd51_dst_boundary = 256;
484 lpc2000_info->cmd51_can_256b = 1;
485 lpc2000_info->cmd51_can_8192b = 0;
486 lpc2000_info->checksum_vector = 5;
487 } else if (strcmp(CMD_ARGV[6], "lpc1700") == 0) {
488 lpc2000_info->variant = lpc1700;
489 lpc2000_info->cmd51_dst_boundary = 256;
490 lpc2000_info->cmd51_can_256b = 1;
491 lpc2000_info->cmd51_can_8192b = 0;
492 lpc2000_info->checksum_vector = 7;
494 LOG_ERROR("unknown LPC2000 variant: %s", CMD_ARGV[6]);
496 return ERROR_FLASH_BANK_INVALID;
499 lpc2000_info->iap_working_area = NULL;
500 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[7], lpc2000_info->cclk);
501 lpc2000_info->calc_checksum = 0;
502 lpc2000_build_sector_list(bank);
505 if (strcmp(CMD_ARGV[8], "calc_checksum") == 0)
506 lpc2000_info->calc_checksum = 1;
512 static int lpc2000_erase(struct flash_bank *bank, int first, int last)
514 struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
515 uint32_t param_table[5];
516 uint32_t result_table[4];
519 if (bank->target->state != TARGET_HALTED) {
520 LOG_ERROR("Target not halted");
521 return ERROR_TARGET_NOT_HALTED;
524 param_table[0] = first;
525 param_table[1] = last;
526 param_table[2] = lpc2000_info->cclk;
528 /* Prepare sectors */
529 status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
530 switch (status_code) {
531 case ERROR_FLASH_OPERATION_FAILED:
532 return ERROR_FLASH_OPERATION_FAILED;
533 case LPC2000_CMD_SUCCESS:
535 case LPC2000_INVALID_SECTOR:
536 return ERROR_FLASH_SECTOR_INVALID;
539 LOG_WARNING("lpc2000 prepare sectors returned %i", status_code);
540 return ERROR_FLASH_OPERATION_FAILED;
544 status_code = lpc2000_iap_call(bank, 52, param_table, result_table);
545 switch (status_code) {
546 case ERROR_FLASH_OPERATION_FAILED:
547 return ERROR_FLASH_OPERATION_FAILED;
548 case LPC2000_CMD_SUCCESS:
550 case LPC2000_INVALID_SECTOR:
551 return ERROR_FLASH_SECTOR_INVALID;
554 LOG_WARNING("lpc2000 erase sectors returned %i", status_code);
555 return ERROR_FLASH_OPERATION_FAILED;
561 static int lpc2000_protect(struct flash_bank *bank, int set, int first, int last)
563 /* can't protect/unprotect on the lpc2000 */
567 static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
569 struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
570 struct target *target = bank->target;
571 uint32_t dst_min_alignment;
572 uint32_t bytes_remaining = count;
573 uint32_t bytes_written = 0;
574 int first_sector = 0;
576 uint32_t param_table[5];
577 uint32_t result_table[4];
580 struct working_area *download_area;
581 int retval = ERROR_OK;
583 if (bank->target->state != TARGET_HALTED) {
584 LOG_ERROR("Target not halted");
585 return ERROR_TARGET_NOT_HALTED;
588 if (offset + count > bank->size)
589 return ERROR_FLASH_DST_OUT_OF_BANK;
591 dst_min_alignment = lpc2000_info->cmd51_dst_boundary;
593 if (offset % dst_min_alignment) {
594 LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32,
597 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
600 for (i = 0; i < bank->num_sectors; i++) {
601 if (offset >= bank->sectors[i].offset)
603 if (offset + DIV_ROUND_UP(count, dst_min_alignment)
604 * dst_min_alignment > bank->sectors[i].offset)
608 LOG_DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
610 /* check if exception vectors should be flashed */
611 if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum) {
612 uint32_t checksum = 0;
613 for (i = 0; i < 8; i++) {
614 LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32, i * 4,
615 buf_get_u32(buffer + (i * 4), 0, 32));
616 if (i != lpc2000_info->checksum_vector)
617 checksum += buf_get_u32(buffer + (i * 4), 0, 32);
619 checksum = 0 - checksum;
620 LOG_DEBUG("checksum: 0x%8.8" PRIx32, checksum);
622 uint32_t original_value = buf_get_u32(buffer +
623 (lpc2000_info->checksum_vector * 4), 0, 32);
624 if (original_value != checksum) {
625 LOG_WARNING("Verification will fail since checksum in image (0x%8.8" PRIx32 ") "
626 "to be written to flash is different from calculated vector "
627 "checksum (0x%8.8" PRIx32 ").", original_value, checksum);
628 LOG_WARNING("To remove this warning modify build tools on developer PC "
629 "to inject correct LPC vector checksum.");
632 buf_set_u32(buffer + (lpc2000_info->checksum_vector * 4), 0, 32, checksum);
635 /* allocate a working area */
636 if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer,
637 &download_area) != ERROR_OK) {
638 LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
639 return ERROR_FLASH_OPERATION_FAILED;
642 while (bytes_remaining > 0) {
643 uint32_t thisrun_bytes;
644 if (bytes_remaining >= lpc2000_info->cmd51_max_buffer)
645 thisrun_bytes = lpc2000_info->cmd51_max_buffer;
646 else if (bytes_remaining >= 1024)
647 thisrun_bytes = 1024;
648 else if ((bytes_remaining >= 512) || (!lpc2000_info->cmd51_can_256b))
653 /* Prepare sectors */
654 param_table[0] = first_sector;
655 param_table[1] = last_sector;
656 status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
657 switch (status_code) {
658 case ERROR_FLASH_OPERATION_FAILED:
659 retval = ERROR_FLASH_OPERATION_FAILED;
661 case LPC2000_CMD_SUCCESS:
663 case LPC2000_INVALID_SECTOR:
664 retval = ERROR_FLASH_SECTOR_INVALID;
667 LOG_WARNING("lpc2000 prepare sectors returned %i", status_code);
668 retval = ERROR_FLASH_OPERATION_FAILED;
672 /* Exit if error occured */
673 if (retval != ERROR_OK)
676 if (bytes_remaining >= thisrun_bytes) {
677 retval = target_write_buffer(bank->target, download_area->address,
678 thisrun_bytes, buffer + bytes_written);
679 if (retval != ERROR_OK) {
680 retval = ERROR_FLASH_OPERATION_FAILED;
684 uint8_t *last_buffer = malloc(thisrun_bytes);
685 memcpy(last_buffer, buffer + bytes_written, bytes_remaining);
686 memset(last_buffer + bytes_remaining, 0xff, thisrun_bytes -
688 target_write_buffer(bank->target,
689 download_area->address,
695 LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32,
697 bank->base + offset + bytes_written);
700 param_table[0] = bank->base + offset + bytes_written;
701 param_table[1] = download_area->address;
702 param_table[2] = thisrun_bytes;
703 param_table[3] = lpc2000_info->cclk;
704 status_code = lpc2000_iap_call(bank, 51, param_table, result_table);
705 switch (status_code) {
706 case ERROR_FLASH_OPERATION_FAILED:
707 retval = ERROR_FLASH_OPERATION_FAILED;
709 case LPC2000_CMD_SUCCESS:
711 case LPC2000_INVALID_SECTOR:
712 retval = ERROR_FLASH_SECTOR_INVALID;
715 LOG_WARNING("lpc2000 returned %i", status_code);
716 retval = ERROR_FLASH_OPERATION_FAILED;
720 /* Exit if error occured */
721 if (retval != ERROR_OK)
724 if (bytes_remaining > thisrun_bytes)
725 bytes_remaining -= thisrun_bytes;
728 bytes_written += thisrun_bytes;
731 target_free_working_area(target, download_area);
736 static int lpc2000_probe(struct flash_bank *bank)
738 /* we can't probe on an lpc2000
739 * if this is an lpc2xxx, it has the configured flash
744 static int lpc2000_erase_check(struct flash_bank *bank)
746 if (bank->target->state != TARGET_HALTED) {
747 LOG_ERROR("Target not halted");
748 return ERROR_TARGET_NOT_HALTED;
751 return lpc2000_iap_blank_check(bank, 0, bank->num_sectors - 1);
754 static int lpc2000_protect_check(struct flash_bank *bank)
756 /* sectors are always protected */
760 static int get_lpc2000_info(struct flash_bank *bank, char *buf, int buf_size)
762 struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
766 "lpc2000 flash driver variant: %i, clk: %" PRIi32 "kHz",
767 lpc2000_info->variant,
773 COMMAND_HANDLER(lpc2000_handle_part_id_command)
775 uint32_t param_table[5];
776 uint32_t result_table[4];
780 return ERROR_COMMAND_SYNTAX_ERROR;
782 struct flash_bank *bank;
783 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
784 if (ERROR_OK != retval)
787 if (bank->target->state != TARGET_HALTED) {
788 LOG_ERROR("Target not halted");
789 return ERROR_TARGET_NOT_HALTED;
792 status_code = lpc2000_iap_call(bank, 54, param_table, result_table);
793 if (status_code != 0x0) {
794 if (status_code == ERROR_FLASH_OPERATION_FAILED) {
795 command_print(CMD_CTX,
796 "no sufficient working area specified, can't access LPC2000 IAP interface");
799 command_print(CMD_CTX, "lpc2000 IAP returned status code %i", status_code);
801 command_print(CMD_CTX, "lpc2000 part id: 0x%8.8" PRIx32, result_table[0]);
806 static const struct command_registration lpc2000_exec_command_handlers[] = {
809 .handler = lpc2000_handle_part_id_command,
810 .mode = COMMAND_EXEC,
811 .help = "print part id of lpc2000 flash bank <num>",
814 COMMAND_REGISTRATION_DONE
816 static const struct command_registration lpc2000_command_handlers[] = {
820 .help = "lpc2000 flash command group",
822 .chain = lpc2000_exec_command_handlers,
824 COMMAND_REGISTRATION_DONE
827 struct flash_driver lpc2000_flash = {
829 .commands = lpc2000_command_handlers,
830 .flash_bank_command = lpc2000_flash_bank_command,
831 .erase = lpc2000_erase,
832 .protect = lpc2000_protect,
833 .write = lpc2000_write,
834 .read = default_flash_read,
835 .probe = lpc2000_probe,
836 .auto_probe = lpc2000_probe,
837 .erase_check = lpc2000_erase_check,
838 .protect_check = lpc2000_protect_check,
839 .info = get_lpc2000_info,