1 /***************************************************************************
2 * Copyright (C) 2011 by Rodrigo L. Rosa *
3 * rodrigorosa.LG@gmail.com *
5 * Based on a file written by: *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program; if not, write to the *
22 * Free Software Foundation, Inc., *
23 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
24 ***************************************************************************/
27 * @file dsp5680xx_flash.c
28 * @author Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>
29 * @date Thu Jun 9 18:21:58 2011
31 * @brief This file implements the basic functions to run flashing commands
32 * from the TCL interface.
33 * It allows the user to flash the Freescale 5680xx DSP.
43 #include <helper/binarybuffer.h>
44 #include <helper/time_support.h>
45 #include <target/algorithm.h>
46 #include <target/dsp5680xx.h>
48 static int dsp5680xx_build_sector_list(struct flash_bank *bank)
50 uint32_t offset = HFM_FLASH_BASE_ADDR;
52 bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
55 for (i = 0; i < bank->num_sectors; ++i) {
56 bank->sectors[i].offset = i * HFM_SECTOR_SIZE;
57 bank->sectors[i].size = HFM_SECTOR_SIZE;
58 offset += bank->sectors[i].size;
59 bank->sectors[i].is_erased = -1;
60 bank->sectors[i].is_protected = -1;
62 LOG_USER("%s not tested yet.", __func__);
67 /* flash bank dsp5680xx 0 0 0 0 <target#> */
68 FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command)
70 bank->base = HFM_FLASH_BASE_ADDR;
71 bank->size = HFM_SIZE_BYTES; /* top 4k not accessible */
72 bank->num_sectors = HFM_SECTOR_COUNT;
73 dsp5680xx_build_sector_list(bank);
79 * A memory mapped register (PROT) holds information regarding sector protection.
80 * Protection refers to undesired core access.
81 * The value in this register is loaded from flash upon reset.
87 static int dsp5680xx_flash_protect_check(struct flash_bank *bank)
89 int retval = ERROR_OK;
91 uint16_t protected = 0;
93 retval = dsp5680xx_f_protect_check(bank->target, &protected);
94 if (retval != ERROR_OK) {
95 for (int i = 0; i < HFM_SECTOR_COUNT; i++)
96 bank->sectors[i].is_protected = -1;
99 for (int i = 0; i < HFM_SECTOR_COUNT / 2; i++) {
101 bank->sectors[2 * i].is_protected = 1;
102 bank->sectors[2 * i + 1].is_protected = 1;
104 bank->sectors[2 * i].is_protected = 0;
105 bank->sectors[2 * i + 1].is_protected = 0;
107 protected = (protected >> 1);
113 * Protection funcionality is not implemented.
114 * The current implementation applies/removes security on the chip.
115 * The chip is effectively secured/unsecured after the first reset
116 * following the execution of this function.
119 * @param set Apply or remove security on the chip.
120 * @param first This parameter is ignored.
121 * @param last This parameter is ignored.
125 static int dsp5680xx_flash_protect(struct flash_bank *bank, int set, int first,
129 * This applies security to flash module after next reset, it does
130 * not actually apply protection (protection refers to undesired access from the core)
135 retval = dsp5680xx_f_lock(bank->target);
137 retval = dsp5680xx_f_unlock(bank->target);
138 if (retval == ERROR_OK) {
139 /* mark all as erased */
140 for (int i = 0; i <= (HFM_SECTOR_COUNT - 1); i++)
141 /* FM does not recognize it as erased if erased via JTAG. */
142 bank->sectors[i].is_erased = 1;
149 * The dsp5680xx use word addressing. The "/2" that appear in the following code
150 * are a workaround for the fact that OpenOCD uses byte addressing.
153 * @param buffer Data to write to flash.
155 * @param count In bytes (2 bytes per address).
159 static int dsp5680xx_flash_write(struct flash_bank *bank, const uint8_t* buffer,
160 uint32_t offset, uint32_t count)
164 if ((offset + count / 2) > bank->size) {
165 LOG_ERROR("%s: Flash bank cannot fit data.", __func__);
170 * Writing to odd addresses not supported.
171 * This chip uses word addressing, Openocd only supports byte addressing.
172 * The workaround results in disabling writing to odd byte addresses
174 LOG_ERROR("%s: Writing to odd addresses not supported for this target", __func__);
177 retval = dsp5680xx_f_wr(bank->target, buffer, bank->base + offset / 2, count, 0);
180 for (addr_word = bank->base + offset / 2; addr_word < count / 2;
181 addr_word += (HFM_SECTOR_SIZE / 2)) {
182 if (retval == ERROR_OK)
183 bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = 0;
185 bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = -1;
190 static int dsp5680xx_probe(struct flash_bank *bank)
192 LOG_DEBUG("%s not implemented", __func__);
197 * The flash module (FM) on the dsp5680xx supports both individual sector
198 * and mass erase of the flash memory.
199 * If this function is called with @first == @last == 0 or if @first is the
200 * first sector (#0) and @last is the last sector then the mass erase command
201 * is executed (much faster than erasing each sector individually).
209 static int dsp5680xx_flash_erase(struct flash_bank *bank, int first, int last)
213 retval = dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last);
214 if ((!(first | last)) || ((first == 0) && (last == (HFM_SECTOR_COUNT - 1))))
215 last = HFM_SECTOR_COUNT - 1;
216 if (retval == ERROR_OK)
217 for (int i = first; i <= last; i++)
218 bank->sectors[i].is_erased = 1;
221 * If an error occurred unknown status
222 *is set even though some sector could have been correctly erased.
224 for (int i = first; i <= last; i++)
225 bank->sectors[i].is_erased = -1;
230 * The flash module (FM) on the dsp5680xx support a blank check function.
231 * This function executes the FM's blank check functionality on each and every sector.
237 static int dsp5680xx_flash_erase_check(struct flash_bank *bank)
239 int retval = ERROR_OK;
245 for (i = 0; i < HFM_SECTOR_COUNT; i++) {
246 if (bank->sectors[i].is_erased == -1) {
247 retval = dsp5680xx_f_erase_check(bank->target, &erased, i);
248 if (retval != ERROR_OK) {
249 bank->sectors[i].is_erased = -1;
252 bank->sectors[i].is_erased = 1;
254 bank->sectors[i].is_erased = 0;
261 struct flash_driver dsp5680xx_flash = {
262 .name = "dsp5680xx_flash",
263 .flash_bank_command = dsp5680xx_flash_bank_command,
264 .erase = dsp5680xx_flash_erase,
265 .protect = dsp5680xx_flash_protect,
266 .write = dsp5680xx_flash_write,
267 /* .read = default_flash_read, */
268 .probe = dsp5680xx_probe,
269 .auto_probe = dsp5680xx_probe,
270 .erase_check = dsp5680xx_flash_erase_check,
271 .protect_check = dsp5680xx_flash_protect_check,