1 /***************************************************************************
2 * Copyright (C) 2015 by Tobias Diedrich *
3 * <ranma+openwrt@tdiedrich.de> *
5 * based on the stmsmi code written by Antonio Borneo *
6 * <borneo.antonio@gmail.com> *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc. *
22 ***************************************************************************/
24 * Driver for the Atheros AR7xxx/AR9xxx SPI flash interface.
26 * Since no SPI mode register is present, presumably only
27 * SPI "mode 3" (CPOL=1 and CPHA=1) is supported.
29 * The SPI interface supports up to 3 chip selects, however the SPI flash
30 * used for booting the system must be connected to CS0.
32 * On boot, the first 4MiB of flash space are memory-mapped into the
33 * area bf000000 - bfffffff (4 copies), so the MIPS bootstrap
34 * vector bfc00000 is mapped to the beginning of the flash.
36 * By writing a 1 to the REMAP_DISABLE bit in the SPI_CONTROL register,
37 * the full area of 16MiB is mapped.
39 * By writing a 0 to the SPI_FUNCTION_SELECT register (write-only dword
40 * register @bf000000), memory mapping is disabled and the SPI registers
41 * are exposed to the CPU instead:
42 * bf000000 SPI_FUNCTION_SELECT
43 * bf000004 SPI_CONTROL
44 * bf000008 SPI_IO_CONTROL
45 * bf00000c SPI_READ_DATA
47 * When not memory-mapped, the SPI interface is essentially bitbanged
48 * using SPI_CONTROL and SPI_IO_CONTROL with the only hardware-assistance
49 * being the 32bit read-only shift-register SPI_READ_DATA.
58 #include <jtag/jtag.h>
59 #include <helper/time_support.h>
60 #include <helper/types.h>
61 #include <target/mips32.h>
62 #include <target/mips32_pracc.h>
63 #include <target/target.h>
65 #define BITS_PER_BYTE 8
67 #define ATH79_REG_FS 0
68 #define ATH79_REG_CLOCK 4
69 #define ATH79_REG_WRITE 8
70 #define ATH79_REG_DATA 12
72 #define ATH79_SPI_CS_ALLHI 0x70000
73 #define ATH79_SPI_CS0_HI 0x10000
74 #define ATH79_SPI_CS1_HI 0x20000
75 #define ATH79_SPI_CS2_HI 0x40000
76 #define ATH79_SPI_CE_HI 0x00100
77 #define ATH79_SPI_DO_HI 0x00001
79 #define ATH79_XFER_FINAL 0x00000001
80 #define ATH79_XFER_PARTIAL 0x00000000
83 #define ATH79_MAX_TIMEOUT (3000)
85 struct ath79_spi_ctx {
91 struct ath79_flash_bank {
95 const struct flash_device *dev;
96 struct ath79_spi_ctx spi;
105 static const struct ath79_target target_devices[] = {
106 /* name, tap_idcode, io_base */
107 { "ATH79", 0x00000001, 0xbf000000 },
111 static const uint32_t ath79_chipselects[] = {
112 (~ATH79_SPI_CS0_HI & ATH79_SPI_CS_ALLHI),
113 (~ATH79_SPI_CS1_HI & ATH79_SPI_CS_ALLHI),
114 (~ATH79_SPI_CS2_HI & ATH79_SPI_CS_ALLHI),
117 static void ath79_pracc_addn(struct pracc_queue_info *ctx,
118 const uint32_t *instr,
121 for (int i = 0; i < n; i++)
122 pracc_add(ctx, 0, instr[i]);
125 static int ath79_spi_bitbang_codegen(struct ath79_flash_bank *ath79_info,
126 struct pracc_queue_info *ctx,
127 uint8_t *data, int len,
130 uint32_t cs_high = ATH79_SPI_CS_ALLHI;
131 uint32_t cs_low = ath79_chipselects[ath79_info->chipselect];
132 uint32_t clock_high = cs_low | ATH79_SPI_CE_HI;
133 uint32_t clock_low = cs_low;
134 uint32_t pracc_out = 0;
135 uint32_t io_base = ath79_info->io_base;
137 const uint32_t preamble1[] = {
138 /* $15 = MIPS32_PRACC_BASE_ADDR */
139 MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR),
141 MIPS32_LUI(1, UPPER16(io_base)),
143 ath79_pracc_addn(ctx, preamble1, ARRAY_SIZE(preamble1));
144 if (ath79_info->spi.pre_deselect) {
145 /* Clear deselect flag so we don't deselect again if
146 * this is a partial xfer.
148 ath79_info->spi.pre_deselect = 0;
149 const uint32_t pre_deselect[] = {
150 /* [$1 + FS] = 1 (enable flash io register access) */
151 MIPS32_LUI(2, UPPER16(1)),
152 MIPS32_ORI(2, 2, LOWER16(1)),
153 MIPS32_SW(2, ATH79_REG_FS, 1),
154 /* deselect flash just in case */
155 /* $2 = SPI_CS_DIS */
156 MIPS32_LUI(2, UPPER16(cs_high)),
157 MIPS32_ORI(2, 2, LOWER16(cs_high)),
158 /* [$1 + WRITE] = $2 */
159 MIPS32_SW(2, ATH79_REG_WRITE, 1),
161 ath79_pracc_addn(ctx, pre_deselect, ARRAY_SIZE(pre_deselect));
163 const uint32_t preamble2[] = {
164 /* t0 = CLOCK_LOW + 0-bit */
165 MIPS32_LUI(8, UPPER16((clock_low + 0))),
166 MIPS32_ORI(8, 8, LOWER16((clock_low + 0))),
167 /* t1 = CLOCK_LOW + 1-bit */
168 MIPS32_LUI(9, UPPER16((clock_low + 1))),
169 MIPS32_ORI(9, 9, LOWER16((clock_low + 1))),
170 /* t2 = CLOCK_HIGH + 0-bit */
171 MIPS32_LUI(10, UPPER16((clock_high + 0))),
172 MIPS32_ORI(10, 10, LOWER16((clock_high + 0))),
173 /* t3 = CLOCK_HIGH + 1-bit */
174 MIPS32_LUI(11, UPPER16((clock_high + 1))),
175 MIPS32_ORI(11, 11, LOWER16((clock_high + 1))),
177 ath79_pracc_addn(ctx, preamble2, ARRAY_SIZE(preamble2));
179 for (int i = 0; i < len; i++) {
182 /* Generate bitbang code for one byte, highest bit first .*/
183 for (int j = BITS_PER_BYTE - 1; j >= 0; j--) {
184 int bit = ((x >> j) & 1);
187 /* [$1 + WRITE] = t1 */
189 MIPS32_SW(9, ATH79_REG_WRITE, 1));
190 /* [$1 + WRITE] = t3 */
192 MIPS32_SW(11, ATH79_REG_WRITE, 1));
194 /* [$1 + WRITE] = t0 */
196 MIPS32_SW(8, ATH79_REG_WRITE, 1));
197 /* [$1 + WRITE] = t2 */
199 MIPS32_SW(10, ATH79_REG_WRITE, 1));
203 /* $3 = [$1 + DATA] */
204 pracc_add(ctx, 0, MIPS32_LW(3, ATH79_REG_DATA, 1));
206 pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out,
207 MIPS32_SW(3, PRACC_OUT_OFFSET +
212 if (len & 3) { /* not a multiple of 4 bytes */
213 /* $3 = [$1 + DATA] */
214 pracc_add(ctx, 0, MIPS32_LW(3, ATH79_REG_DATA, 1));
216 pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out,
217 MIPS32_SW(3, PRACC_OUT_OFFSET + pracc_out, 15));
221 if (ath79_info->spi.post_deselect && !partial_xfer) {
222 const uint32_t post_deselect[] = {
223 /* $2 = SPI_CS_DIS */
224 MIPS32_LUI(2, UPPER16(cs_high)),
225 MIPS32_ORI(2, 2, LOWER16(cs_high)),
226 /* [$1 + WRITE] = $2 */
227 MIPS32_SW(2, ATH79_REG_WRITE, 1),
229 /* [$1 + FS] = 0 (disable flash io register access) */
230 MIPS32_XORI(2, 2, 0),
231 MIPS32_SW(2, ATH79_REG_FS, 1),
233 ath79_pracc_addn(ctx, post_deselect, ARRAY_SIZE(post_deselect));
236 /* common pracc epilogue */
238 pracc_add(ctx, 0, MIPS32_B(NEG16(ctx->code_count + 1)));
239 /* restore $15 from DeSave */
240 pracc_add(ctx, 0, MIPS32_MFC0(15, 31, 0));
242 return pracc_out / 4;
245 static int ath79_spi_bitbang_chunk(struct flash_bank *bank,
246 uint8_t *data, int len, int *transferred)
248 struct target *target = bank->target;
249 struct ath79_flash_bank *ath79_info = bank->driver_priv;
250 struct mips32_common *mips32 = target_to_mips32(target);
251 struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
255 * These constants must match the worst case in the above code
256 * generator function ath79_spi_bitbang_codegen.
258 const int pracc_pre_post = 26;
259 const int pracc_loop_byte = 8 * 2 + 2;
261 struct pracc_queue_info ctx = {
262 .max_code = PRACC_MAX_INSTRUCTIONS
264 int max_len = (ctx.max_code - pracc_pre_post) / pracc_loop_byte;
265 int to_xfer = len > max_len ? max_len : len;
266 int partial_xfer = len != to_xfer;
267 int padded_len = (to_xfer + 3) & ~3;
268 uint32_t *out = malloc(padded_len);
271 LOG_ERROR("not enough memory");
276 pracc_queue_init(&ctx);
277 if (ctx.retval != ERROR_OK)
280 LOG_DEBUG("ath79_spi_bitbang_bytes(%p, %08x, %p, %d)",
281 target, ath79_info->io_base, data, len);
283 LOG_DEBUG("max code %d => max len %d. to_xfer %d",
284 ctx.max_code, max_len, to_xfer);
286 pracc_words = ath79_spi_bitbang_codegen(
287 ath79_info, &ctx, data, to_xfer, partial_xfer);
289 LOG_DEBUG("Assembled %d instructions, %d stores",
290 ctx.code_count, ctx.store_count);
292 ctx.retval = mips32_pracc_queue_exec(ejtag_info, &ctx, out);
293 if (ctx.retval != ERROR_OK)
296 if (to_xfer & 3) { /* Not a multiple of 4 bytes. */
298 * Need to realign last word since we didn't shift the
301 int missed_bytes = 4 - (to_xfer & 3);
303 out[pracc_words - 1] <<= BITS_PER_BYTE * missed_bytes;
307 * pracc reads return uint32_t in host endianness, convert to
309 * Since we know the ATH79 target is big endian and the SPI
310 * shift register has the bytes in highest to lowest bit order,
311 * this will ensure correct memory byte order regardless of host
314 target_buffer_set_u32_array(target, (uint8_t *)out, pracc_words, out);
316 if (LOG_LEVEL_IS(LOG_LVL_DEBUG)) {
317 for (int i = 0; i < to_xfer; i++) {
318 LOG_DEBUG("bitbang %02x => %02x",
319 data[i], ((uint8_t *)out)[i]);
322 memcpy(data, out, to_xfer);
323 *transferred = to_xfer;
326 pracc_queue_free(&ctx);
331 static void ath79_spi_bitbang_prepare(struct flash_bank *bank)
333 struct ath79_flash_bank *ath79_info = bank->driver_priv;
335 ath79_info->spi.pre_deselect = 1;
338 static int ath79_spi_bitbang_bytes(struct flash_bank *bank,
339 uint8_t *data, int len, uint32_t flags)
341 struct ath79_flash_bank *ath79_info = bank->driver_priv;
345 ath79_info->spi.post_deselect = !!(flags & ATH79_XFER_FINAL);
349 retval = ath79_spi_bitbang_chunk(
350 bank, data, len, &transferred);
351 if (retval != ERROR_OK)
361 FLASH_BANK_COMMAND_HANDLER(ath79_flash_bank_command)
363 struct ath79_flash_bank *ath79_info;
366 LOG_DEBUG("%s", __func__);
368 if (CMD_ARGC < 6 || CMD_ARGC > 7)
369 return ERROR_COMMAND_SYNTAX_ERROR;
372 if (strcmp(CMD_ARGV[6], "cs0") == 0)
373 chipselect = 0; /* default */
374 else if (strcmp(CMD_ARGV[6], "cs1") == 0)
376 else if (strcmp(CMD_ARGV[6], "cs2") == 0)
379 LOG_ERROR("Unknown arg: %s", CMD_ARGV[6]);
380 return ERROR_COMMAND_SYNTAX_ERROR;
384 ath79_info = calloc(1, sizeof(struct ath79_flash_bank));
386 LOG_ERROR("not enough memory");
390 ath79_info->chipselect = chipselect;
391 bank->driver_priv = ath79_info;
396 /* Read the status register of the external SPI flash chip. */
397 static int read_status_reg(struct flash_bank *bank, uint32_t *status)
399 uint8_t spi_bytes[] = {SPIFLASH_READ_STATUS, 0};
402 /* Send SPI command "read STATUS" */
403 ath79_spi_bitbang_prepare(bank);
404 retval = ath79_spi_bitbang_bytes(
405 bank, spi_bytes, sizeof(spi_bytes),
408 *status = spi_bytes[1];
413 /* check for WIP (write in progress) bit in status register */
415 static int wait_till_ready(struct flash_bank *bank, int timeout)
421 endtime = timeval_ms() + timeout;
423 /* read flash status register */
424 retval = read_status_reg(bank, &status);
425 if (retval != ERROR_OK)
428 if ((status & SPIFLASH_BSY_BIT) == 0)
431 } while (timeval_ms() < endtime);
433 LOG_ERROR("timeout");
437 /* Send "write enable" command to SPI flash chip. */
438 static int ath79_write_enable(struct flash_bank *bank)
443 uint8_t spi_bytes[] = {SPIFLASH_WRITE_ENABLE};
445 /* Send SPI command "write enable" */
446 ath79_spi_bitbang_prepare(bank);
447 retval = ath79_spi_bitbang_bytes(
448 bank, spi_bytes, sizeof(spi_bytes),
450 if (retval != ERROR_OK)
453 /* read flash status register */
454 retval = read_status_reg(bank, &status);
455 if (retval != ERROR_OK)
458 /* Check write enabled */
459 if ((status & SPIFLASH_WE_BIT) == 0) {
460 LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32,
468 static int erase_command(struct flash_bank *bank, int sector)
470 struct ath79_flash_bank *ath79_info = bank->driver_priv;
471 uint32_t offset = bank->sectors[sector].offset;
473 uint8_t spi_bytes[] = {
474 ath79_info->dev->erase_cmd,
480 /* bitbang command */
481 ath79_spi_bitbang_prepare(bank);
482 return ath79_spi_bitbang_bytes(
483 bank, spi_bytes, sizeof(spi_bytes),
487 static int ath79_erase_sector(struct flash_bank *bank, int sector)
489 int retval = ath79_write_enable(bank);
491 if (retval != ERROR_OK)
494 /* send SPI command "block erase" */
495 retval = erase_command(bank, sector);
496 if (retval != ERROR_OK)
499 /* poll WIP for end of self timed Sector Erase cycle */
500 return wait_till_ready(bank, ATH79_MAX_TIMEOUT);
503 static int ath79_erase(struct flash_bank *bank, int first, int last)
505 struct target *target = bank->target;
506 struct ath79_flash_bank *ath79_info = bank->driver_priv;
507 int retval = ERROR_OK;
510 LOG_DEBUG("%s: from sector %d to sector %d", __func__, first, last);
512 if (target->state != TARGET_HALTED) {
513 LOG_ERROR("Target not halted");
514 return ERROR_TARGET_NOT_HALTED;
517 if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
518 LOG_ERROR("Flash sector invalid");
519 return ERROR_FLASH_SECTOR_INVALID;
522 if (!ath79_info->probed) {
523 LOG_ERROR("Flash bank not probed");
524 return ERROR_FLASH_BANK_NOT_PROBED;
527 for (sector = first; sector <= last; sector++) {
528 if (bank->sectors[sector].is_protected) {
529 LOG_ERROR("Flash sector %d protected", sector);
534 for (sector = first; sector <= last; sector++) {
535 retval = ath79_erase_sector(bank, sector);
536 if (retval != ERROR_OK)
544 static int ath79_protect(struct flash_bank *bank, int set,
549 for (sector = first; sector <= last; sector++)
550 bank->sectors[sector].is_protected = set;
554 static int ath79_write_page(struct flash_bank *bank, const uint8_t *buffer,
555 uint32_t address, uint32_t len)
557 struct ath79_flash_bank *ath79_info = bank->driver_priv;
558 uint8_t spi_bytes[] = {
559 SPIFLASH_PAGE_PROGRAM,
567 if (address & 0xff) {
568 LOG_ERROR("ath79_write_page: unaligned write address: %08x",
572 if (!ath79_info->spi.page_buf) {
573 LOG_ERROR("ath79_write_page: page buffer not initialized");
576 if (len > ath79_info->dev->pagesize) {
577 LOG_ERROR("ath79_write_page: len bigger than page size %d: %d",
578 ath79_info->dev->pagesize, len);
582 for (i = 0; i < len; i++) {
583 if (buffer[i] != 0xff)
586 if (i == len) /* all 0xff, no need to program. */
589 LOG_INFO("writing %d bytes to flash page @0x%08x", len, address);
591 memcpy(ath79_info->spi.page_buf, buffer, len);
594 retval = ath79_write_enable(bank);
595 if (retval != ERROR_OK)
598 /* bitbang command */
599 ath79_spi_bitbang_prepare(bank);
600 retval = ath79_spi_bitbang_bytes(
601 bank, spi_bytes, sizeof(spi_bytes),
603 if (retval != ERROR_OK)
607 return ath79_spi_bitbang_bytes(
608 bank, ath79_info->spi.page_buf, len,
612 static int ath79_write_buffer(struct flash_bank *bank, const uint8_t *buffer,
613 uint32_t address, uint32_t len)
615 struct ath79_flash_bank *ath79_info = bank->driver_priv;
616 const uint32_t page_size = ath79_info->dev->pagesize;
619 LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32,
620 __func__, address, len);
623 int page_len = len > page_size ? page_size : len;
625 retval = ath79_write_page(
626 bank, buffer, address, page_len);
627 if (retval != ERROR_OK)
631 address += page_size;
638 static int ath79_write(struct flash_bank *bank, const uint8_t *buffer,
639 uint32_t offset, uint32_t count)
641 struct target *target = bank->target;
644 LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
645 __func__, offset, count);
647 if (offset < bank->base || offset >= bank->base + bank->size) {
648 LOG_ERROR("Start address out of range");
652 offset -= bank->base;
654 if (target->state != TARGET_HALTED) {
655 LOG_ERROR("Target not halted");
656 return ERROR_TARGET_NOT_HALTED;
659 if (offset + count > bank->size) {
660 LOG_WARNING("Write pasts end of flash. Extra data discarded.");
661 count = bank->size - offset;
664 /* Check sector protection */
665 for (sector = 0; sector < bank->num_sectors; sector++) {
666 /* Start offset in or before this sector? */
667 /* End offset in or behind this sector? */
668 struct flash_sector *bs = &bank->sectors[sector];
670 if ((offset < (bs->offset + bs->size)) &&
671 ((offset + count - 1) >= bs->offset) &&
673 LOG_ERROR("Flash sector %d protected", sector);
678 return ath79_write_buffer(bank, buffer, offset, count);
681 static int ath79_read_buffer(struct flash_bank *bank, uint8_t *buffer,
682 uint32_t address, uint32_t len)
684 uint8_t spi_bytes[] = {
692 LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32,
693 __func__, address, len);
695 if (address & 0xff) {
696 LOG_ERROR("ath79_read_buffer: unaligned read address: %08x",
701 LOG_INFO("reading %d bytes from flash @0x%08x", len, address);
703 /* bitbang command */
704 ath79_spi_bitbang_prepare(bank);
705 retval = ath79_spi_bitbang_bytes(
706 bank, spi_bytes, sizeof(spi_bytes), ATH79_XFER_PARTIAL);
707 if (retval != ERROR_OK)
711 return ath79_spi_bitbang_bytes(
712 bank, buffer, len, ATH79_XFER_FINAL);
715 static int ath79_read(struct flash_bank *bank, uint8_t *buffer,
716 uint32_t offset, uint32_t count)
718 struct target *target = bank->target;
720 LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
721 __func__, offset, count);
723 if (offset < bank->base || offset >= bank->base + bank->size) {
724 LOG_ERROR("Start address out of range");
728 offset -= bank->base;
730 if (target->state != TARGET_HALTED) {
731 LOG_ERROR("Target not halted");
732 return ERROR_TARGET_NOT_HALTED;
735 if (offset + count > bank->size) {
736 LOG_WARNING("Reads past end of flash. Extra data discarded.");
737 count = bank->size - offset;
740 return ath79_read_buffer(bank, buffer, offset, count);
743 /* Return ID of flash device */
744 static int read_flash_id(struct flash_bank *bank, uint32_t *id)
746 struct target *target = bank->target;
748 uint8_t spi_bytes[] = {SPIFLASH_READ_ID, 0, 0, 0};
750 if (target->state != TARGET_HALTED) {
751 LOG_ERROR("Target not halted");
752 return ERROR_TARGET_NOT_HALTED;
755 /* Send SPI command "read ID" */
756 ath79_spi_bitbang_prepare(bank);
757 retval = ath79_spi_bitbang_bytes(
758 bank, spi_bytes, sizeof(spi_bytes), ATH79_XFER_FINAL);
759 if (retval != ERROR_OK)
762 *id = (spi_bytes[1] << 0)
763 | (spi_bytes[2] << 8)
764 | (spi_bytes[3] << 16);
766 if (*id == 0xffffff) {
767 LOG_ERROR("No SPI flash found");
774 static int ath79_probe(struct flash_bank *bank)
776 struct target *target = bank->target;
777 struct ath79_flash_bank *ath79_info = bank->driver_priv;
778 struct flash_sector *sectors;
779 uint32_t id = 0; /* silence uninitialized warning */
780 const struct ath79_target *target_device;
783 if (ath79_info->probed) {
785 free(ath79_info->spi.page_buf);
787 ath79_info->probed = 0;
789 for (target_device = target_devices; target_device->name;
791 if (target_device->tap_idcode == target->tap->idcode)
793 if (!target_device->name) {
794 LOG_ERROR("Device ID 0x%" PRIx32 " is not known",
795 target->tap->idcode);
799 ath79_info->io_base = target_device->io_base;
801 LOG_DEBUG("Found device %s at address 0x%" PRIx32,
802 target_device->name, bank->base);
804 retval = read_flash_id(bank, &id);
805 if (retval != ERROR_OK)
808 ath79_info->dev = NULL;
809 for (const struct flash_device *p = flash_devices; p->name; p++)
810 if (p->device_id == id) {
815 if (!ath79_info->dev) {
816 LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
820 LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
821 ath79_info->dev->name, ath79_info->dev->device_id);
823 /* Set correct size value */
824 bank->size = ath79_info->dev->size_in_bytes;
826 /* create and fill sectors array */
828 ath79_info->dev->size_in_bytes / ath79_info->dev->sectorsize;
829 sectors = calloc(1, sizeof(struct flash_sector) * bank->num_sectors);
831 LOG_ERROR("not enough memory");
834 ath79_info->spi.page_buf = malloc(ath79_info->dev->pagesize);
835 if (!ath79_info->spi.page_buf) {
836 LOG_ERROR("not enough memory");
841 for (int sector = 0; sector < bank->num_sectors; sector++) {
842 sectors[sector].offset = sector * ath79_info->dev->sectorsize;
843 sectors[sector].size = ath79_info->dev->sectorsize;
844 sectors[sector].is_erased = 0;
845 sectors[sector].is_protected = 1;
848 bank->sectors = sectors;
849 ath79_info->probed = 1;
853 static int ath79_auto_probe(struct flash_bank *bank)
855 struct ath79_flash_bank *ath79_info = bank->driver_priv;
857 if (ath79_info->probed)
859 return ath79_probe(bank);
862 static int ath79_flash_blank_check(struct flash_bank *bank)
864 /* Not implemented */
868 static int ath79_protect_check(struct flash_bank *bank)
870 /* Not implemented */
874 static int get_ath79_info(struct flash_bank *bank, char *buf, int buf_size)
876 struct ath79_flash_bank *ath79_info = bank->driver_priv;
878 if (!ath79_info->probed) {
879 snprintf(buf, buf_size,
880 "\nATH79 flash bank not probed yet\n");
884 snprintf(buf, buf_size, "\nATH79 flash information:\n"
885 " Device \'%s\' (ID 0x%08" PRIx32 ")\n",
886 ath79_info->dev->name, ath79_info->dev->device_id);
891 struct flash_driver ath79_flash = {
893 .flash_bank_command = ath79_flash_bank_command,
894 .erase = ath79_erase,
895 .protect = ath79_protect,
896 .write = ath79_write,
898 .probe = ath79_probe,
899 .auto_probe = ath79_auto_probe,
900 .erase_check = ath79_flash_blank_check,
901 .protect_check = ath79_protect_check,
902 .info = get_ath79_info,