git.gag.com Git - fw/openocd/blob - src/flash/nor/at91sam7.c

   1 /***************************************************************************
   2  *   Copyright (C) 2006 by Magnus Lundin                                   *
   3  *   lundin@mlu.mine.nu                                                    *
   4  *                                                                         *
   5  *   Copyright (C) 2008 by Gheorghe Guran (atlas)                          *
   6  *                                                                         *
   7  *   This program is free software; you can redistribute it and/or modify  *
   8  *   it under the terms of the GNU General public License as published by  *
   9  *   the Free Software Foundation; either version 2 of the License, or     *
  10  *   (at your option) any later version.                                   *
  11  *                                                                         *
  12  *   This program is distributed in the hope that it will be useful,       *
  13  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  14  *   MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the         *
  15  *   GNU General public License for more details.                          *
  16  *                                                                         *
  17  *   You should have received a copy of the GNU General public License     *
  18  *   along with this program; if not, write to the                         *
  19  *   Free Software Foundation, Inc.,                                       *
  20  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  21 ****************************************************************************/
  22
  23 /***************************************************************************
  24 *
  25 * New flash setup command:
  26 *
  27 * flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_id>
  28 *       [<chip_type> <banks>
  29 *        <sectors_per_bank> <pages_per_sector>
  30 *        <page_size> <num_nvmbits>
  31 *        <ext_freq_khz>]
  32 *
  33 *   <ext_freq_khz> - MUST be used if clock is from external source,
  34 *                    CAN be used if main oscillator frequency is known (recommended)
  35 * Examples:
  36 * ==== RECOMMENDED (covers clock speed) ============
  37 *  flash bank at91sam7 0x00100000 0 0 4 $_TARGETNAME AT91SAM7XC256 1 16 64 256 3 25000
  38 *                       (if auto-detect fails; provides clock spec)
  39 *  flash bank at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 25000
  40 *                       (auto-detect everything except the clock)
  41 * ==== NOT RECOMMENDED !!! (clock speed is not configured) ====
  42 *  flash bank at91sam7 0x00100000 0 0 4 $_TARGETNAME AT91SAM7XC256 1 16 64 256 3 0
  43 *                       (if auto-detect fails)
  44 *  flash bank at91sam7 0 0 0 0 $_TARGETNAME
  45 *                       (old style, auto-detect everything)
  46 ****************************************************************************/
  47
  48 #ifdef HAVE_CONFIG_H
  49 #include "config.h"
  50 #endif
  51
  52 #include "imp.h"
  53 #include <helper/binarybuffer.h>
  54
  55 /* AT91SAM7 control registers */
  56 #define DBGU_CIDR                       0xFFFFF240
  57 #define CKGR_MCFR                       0xFFFFFC24
  58 #define CKGR_MOR                        0xFFFFFC20
  59 #define CKGR_MCFR_MAINRDY       0x10000
  60 #define CKGR_PLLR                       0xFFFFFC2c
  61 #define CKGR_PLLR_DIV           0xff
  62 #define CKGR_PLLR_MUL           0x07ff0000
  63 #define PMC_MCKR                        0xFFFFFC30
  64 #define PMC_MCKR_CSS            0x03
  65 #define PMC_MCKR_PRES           0x1c
  66
  67 /* Flash Controller Commands */
  68 #define WP              0x01
  69 #define SLB             0x02
  70 #define WPL             0x03
  71 #define CLB             0x04
  72 #define EA              0x08
  73 #define SGPB    0x0B
  74 #define CGPB    0x0D
  75 #define SSB             0x0F
  76
  77 /* MC_FSR bit definitions */
  78 #define MC_FSR_FRDY                     1
  79 #define MC_FSR_EOL                      2
  80
  81 /* AT91SAM7 constants */
  82 #define RC_FREQ                         32000
  83
  84 /* Flash timing modes */
  85 #define FMR_TIMING_NONE         0
  86 #define FMR_TIMING_NVBITS       1
  87 #define FMR_TIMING_FLASH        2
  88
  89 /* Flash size constants */
  90 #define FLASH_SIZE_8KB          1
  91 #define FLASH_SIZE_16KB         2
  92 #define FLASH_SIZE_32KB         3
  93 #define FLASH_SIZE_64KB         5
  94 #define FLASH_SIZE_128KB        7
  95 #define FLASH_SIZE_256KB        9
  96 #define FLASH_SIZE_512KB        10
  97 #define FLASH_SIZE_1024KB       12
  98 #define FLASH_SIZE_2048KB       14
  99
 100 static int at91sam7_protect_check(struct flash_bank *bank);
 101 static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
 102                 uint32_t count);
 103
 104 static uint32_t at91sam7_get_flash_status(struct target *target, int bank_number);
 105 static void at91sam7_set_flash_mode(struct flash_bank *bank, int mode);
 106 static uint32_t at91sam7_wait_status_busy(struct flash_bank *bank, uint32_t waitbits, int timeout);
 107 static int at91sam7_flash_command(struct flash_bank *bank, uint8_t cmd, uint16_t pagen);
 108
 109 static uint32_t MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
 110 static uint32_t MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
 111 static uint32_t MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
 112
 113 static char *EPROC[8] = {
 114         "Unknown", "ARM946-E", "ARM7TDMI", "Unknown", "ARM920T", "ARM926EJ-S", "Unknown", "Unknown"
 115 };
 116
 117 struct at91sam7_flash_bank {
 118         /* chip id register */
 119         uint32_t cidr;
 120         uint16_t cidr_ext;
 121         uint16_t cidr_nvptyp;
 122         uint16_t cidr_arch;
 123         uint16_t cidr_sramsiz;
 124         uint16_t cidr_nvpsiz;
 125         uint16_t cidr_nvpsiz2;
 126         uint16_t cidr_eproc;
 127         uint16_t cidr_version;
 128         const char *target_name;
 129
 130         /* flash auto-detection */
 131         uint8_t flash_autodetection;
 132
 133         /* flash geometry */
 134         uint16_t pages_per_sector;
 135         uint16_t pagesize;
 136         uint16_t pages_in_lockregion;
 137
 138         /* nv memory bits */
 139         uint16_t num_lockbits_on;
 140         uint16_t lockbits;
 141         uint16_t num_nvmbits;
 142         uint16_t num_nvmbits_on;
 143         uint16_t nvmbits;
 144         uint8_t securitybit;
 145
 146         /* 0: not init
 147          * 1: fmcn for nvbits (1uS)
 148          * 2: fmcn for flash (1.5uS) */
 149         uint8_t flashmode;
 150
 151         /* main clock status */
 152         uint8_t mck_valid;
 153         uint32_t mck_freq;
 154
 155         /* external clock frequency */
 156         uint32_t ext_freq;
 157
 158 };
 159
 160 #if 0
 161 static long SRAMSIZ[16] = {
 162         -1,
 163         0x0400,         /*  1K */
 164         0x0800,         /*  2K */
 165         -1,
 166         0x1c000,        /* 112K */
 167         0x1000,         /*   4K */
 168         0x14000,        /*  80K */
 169         0x28000,        /* 160K */
 170         0x2000,         /*   8K */
 171         0x4000,         /*  16K */
 172         0x8000,         /*  32K */
 173         0x10000,        /*  64K */
 174         0x20000,        /* 128K */
 175         0x40000,        /* 256K */
 176         0x18000,        /*  96K */
 177         0x80000,        /* 512K */
 178 };
 179 #endif
 180
 181 static uint32_t at91sam7_get_flash_status(struct target *target, int bank_number)
 182 {
 183         uint32_t fsr;
 184         target_read_u32(target, MC_FSR[bank_number], &fsr);
 185
 186         return fsr;
 187 }
 188
 189 /* Read clock configuration and set at91sam7_info->mck_freq */
 190 static void at91sam7_read_clock_info(struct flash_bank *bank)
 191 {
 192         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 193         struct target *target = bank->target;
 194         uint32_t mckr, mcfr, pllr, mor;
 195         unsigned long tmp = 0, mainfreq;
 196
 197         /* Read Clock Generator Main Oscillator Register */
 198         target_read_u32(target, CKGR_MOR, &mor);
 199         /* Read Clock Generator Main Clock Frequency Register */
 200         target_read_u32(target, CKGR_MCFR, &mcfr);
 201         /* Read Master Clock Register*/
 202         target_read_u32(target, PMC_MCKR, &mckr);
 203         /* Read Clock Generator PLL Register  */
 204         target_read_u32(target, CKGR_PLLR, &pllr);
 205
 206         at91sam7_info->mck_valid = 0;
 207         at91sam7_info->mck_freq = 0;
 208         switch (mckr & PMC_MCKR_CSS) {
 209                 case 0:                 /* Slow Clock */
 210                         at91sam7_info->mck_valid = 1;
 211                         tmp = RC_FREQ;
 212                         break;
 213
 214                 case 1:                 /* Main Clock */
 215                         if ((mcfr & CKGR_MCFR_MAINRDY) &&
 216                         (at91sam7_info->ext_freq == 0)) {
 217                                 at91sam7_info->mck_valid = 1;
 218                                 tmp = RC_FREQ / 16ul * (mcfr & 0xffff);
 219                         } else if (at91sam7_info->ext_freq != 0) {
 220                                 at91sam7_info->mck_valid = 1;
 221                                 tmp = at91sam7_info->ext_freq;
 222                         }
 223                         break;
 224
 225                 case 2:                 /* Reserved */
 226                         break;
 227
 228                 case 3:                 /* PLL Clock */
 229                         if ((mcfr & CKGR_MCFR_MAINRDY) &&
 230                         (at91sam7_info->ext_freq == 0)) {
 231                                 target_read_u32(target, CKGR_PLLR, &pllr);
 232                                 if (!(pllr & CKGR_PLLR_DIV))
 233                                         break;  /* 0 Hz */
 234                                 at91sam7_info->mck_valid = 1;
 235                                 mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
 236                                 /* Integer arithmetic should have sufficient precision
 237                                  * as long as PLL is properly configured. */
 238                                 tmp = mainfreq / (pllr & CKGR_PLLR_DIV)*
 239                                                 (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
 240                         } else if ((at91sam7_info->ext_freq != 0) &&
 241                                         ((pllr&CKGR_PLLR_DIV) != 0)) {
 242                                 at91sam7_info->mck_valid = 1;
 243                                 tmp = at91sam7_info->ext_freq / (pllr&CKGR_PLLR_DIV)*
 244                                                 (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
 245                         }
 246                         break;
 247         }
 248
 249         /* Prescaler adjust */
 250         if ((((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0)) {
 251                 at91sam7_info->mck_valid = 0;
 252                 at91sam7_info->mck_freq = 0;
 253         } else if (((mckr & PMC_MCKR_PRES) >> 2) != 0)
 254                 at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
 255         else
 256                 at91sam7_info->mck_freq = tmp;
 257 }
 258
 259 /* Setup the timimg registers for nvbits or normal flash */
 260 static void at91sam7_set_flash_mode(struct flash_bank *bank, int mode)
 261 {
 262         uint32_t fmr, fmcn = 0, fws = 0;
 263         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 264         struct target *target = bank->target;
 265
 266         if (mode && (mode != at91sam7_info->flashmode)) {
 267                 /* Always round up (ceil) */
 268                 if (mode == FMR_TIMING_NVBITS) {
 269                         if (at91sam7_info->cidr_arch == 0x60) {
 270                                 /* AT91SAM7A3 uses master clocks in 100 ns */
 271                                 fmcn = (at91sam7_info->mck_freq/10000000ul) + 1;
 272                         } else {
 273                                 /* master clocks in 1uS for ARCH 0x7 types */
 274                                 fmcn = (at91sam7_info->mck_freq/1000000ul) + 1;
 275                         }
 276                 } else if (mode == FMR_TIMING_FLASH) {
 277                         /* main clocks in 1.5uS */
 278                         fmcn = (at91sam7_info->mck_freq/1000000ul)+
 279                                 (at91sam7_info->mck_freq/2000000ul) + 1;
 280                 }
 281
 282                 /* hard overclocking */
 283                 if (fmcn > 0xFF)
 284                         fmcn = 0xFF;
 285
 286                 /* Only allow fmcn = 0 if clock period is > 30 us = 33kHz. */
 287                 if (at91sam7_info->mck_freq <= 33333ul)
 288                         fmcn = 0;
 289                 /* Only allow fws = 0 if clock frequency is < 30 MHz. */
 290                 if (at91sam7_info->mck_freq > 30000000ul)
 291                         fws = 1;
 292
 293                 LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, (int)(fmcn));
 294                 fmr = fmcn << 16 | fws << 8;
 295                 target_write_u32(target, MC_FMR[bank->bank_number], fmr);
 296         }
 297
 298         at91sam7_info->flashmode = mode;
 299 }
 300
 301 static uint32_t at91sam7_wait_status_busy(struct flash_bank *bank, uint32_t waitbits, int timeout)
 302 {
 303         uint32_t status;
 304
 305         while ((!((status = at91sam7_get_flash_status(bank->target,
 306                         bank->bank_number)) & waitbits)) && (timeout-- > 0)) {
 307                 LOG_DEBUG("status[%i]: 0x%" PRIx32 "", (int)bank->bank_number, status);
 308                 alive_sleep(1);
 309         }
 310
 311         LOG_DEBUG("status[%i]: 0x%" PRIx32 "", bank->bank_number, status);
 312
 313         if (status & 0x0C) {
 314                 LOG_ERROR("status register: 0x%" PRIx32 "", status);
 315                 if (status & 0x4)
 316                         LOG_ERROR("Lock Error Bit Detected, Operation Abort");
 317                 if (status & 0x8)
 318                         LOG_ERROR("Invalid command and/or bad keyword, Operation Abort");
 319                 if (status & 0x10)
 320                         LOG_ERROR("Security Bit Set, Operation Abort");
 321         }
 322
 323         return status;
 324 }
 325
 326 /* Send one command to the AT91SAM flash controller */
 327 static int at91sam7_flash_command(struct flash_bank *bank, uint8_t cmd, uint16_t pagen)
 328 {
 329         uint32_t fcr;
 330         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 331         struct target *target = bank->target;
 332
 333         fcr = (0x5A << 24) | ((pagen&0x3FF) << 8) | cmd;
 334         target_write_u32(target, MC_FCR[bank->bank_number], fcr);
 335         LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u",
 336                 fcr,
 337                 bank->bank_number + 1,
 338                 pagen);
 339
 340         if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB) | (cmd == CLB))) {
 341                 /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
 342                 if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)
 343                         return ERROR_FLASH_OPERATION_FAILED;
 344                 return ERROR_OK;
 345         }
 346
 347         if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C)
 348                 return ERROR_FLASH_OPERATION_FAILED;
 349
 350         return ERROR_OK;
 351 }
 352
 353 /* Read device id register, main clock frequency register and fill in driver info structure */
 354 static int at91sam7_read_part_info(struct flash_bank *bank)
 355 {
 356         struct flash_bank *t_bank = bank;
 357         struct at91sam7_flash_bank *at91sam7_info;
 358         struct target *target = t_bank->target;
 359
 360         uint16_t bnk, sec;
 361         uint16_t arch;
 362         uint32_t cidr;
 363         uint8_t banks_num = 0;
 364         uint16_t num_nvmbits = 0;
 365         uint16_t sectors_num = 0;
 366         uint16_t pages_per_sector = 0;
 367         uint16_t page_size = 0;
 368         uint32_t ext_freq;
 369         uint32_t bank_size;
 370         uint32_t base_address = 0;
 371         char *target_name_t = "Unknown";
 372
 373         at91sam7_info = t_bank->driver_priv;
 374
 375         if (at91sam7_info->cidr != 0) {
 376                 /* flash already configured, update clock and check for protected sectors */
 377                 struct flash_bank *fb = bank;
 378                 t_bank = fb;
 379
 380                 while (t_bank) {
 381                         /* re-calculate master clock frequency */
 382                         at91sam7_read_clock_info(t_bank);
 383
 384                         /* no timming */
 385                         at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 386
 387                         /* check protect state */
 388                         at91sam7_protect_check(t_bank);
 389
 390                         t_bank = fb->next;
 391                         fb = t_bank;
 392                 }
 393
 394                 return ERROR_OK;
 395         }
 396
 397         /* Read and parse chip identification register */
 398         target_read_u32(target, DBGU_CIDR, &cidr);
 399         if (cidr == 0) {
 400                 LOG_WARNING("Cannot identify target as an AT91SAM");
 401                 return ERROR_FLASH_OPERATION_FAILED;
 402         }
 403
 404         if (at91sam7_info->flash_autodetection == 0) {
 405                 /* banks and sectors are already created, based on data from input file */
 406                 struct flash_bank *fb = bank;
 407                 t_bank = fb;
 408                 while (t_bank) {
 409                         at91sam7_info = t_bank->driver_priv;
 410
 411                         at91sam7_info->cidr = cidr;
 412                         at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
 413                         at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
 414                         at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
 415                         at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
 416                         at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
 417                         at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
 418                         at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
 419                         at91sam7_info->cidr_version = cidr&0x001F;
 420
 421                         /* calculate master clock frequency */
 422                         at91sam7_read_clock_info(t_bank);
 423
 424                         /* no timming */
 425                         at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 426
 427                         /* check protect state */
 428                         at91sam7_protect_check(t_bank);
 429
 430                         t_bank = fb->next;
 431                         fb = t_bank;
 432                 }
 433
 434                 return ERROR_OK;
 435         }
 436
 437         arch = (cidr >> 20)&0x00FF;
 438
 439         /* check flash size */
 440         switch ((cidr >> 8)&0x000F) {
 441                 case FLASH_SIZE_8KB:
 442                         break;
 443
 444                 case FLASH_SIZE_16KB:
 445                         banks_num = 1;
 446                         sectors_num = 8;
 447                         pages_per_sector = 32;
 448                         page_size  = 64;
 449                         base_address = 0x00100000;
 450                         if (arch == 0x70) {
 451                                 num_nvmbits = 2;
 452                                 target_name_t = "AT91SAM7S161/16";
 453                         }
 454                         break;
 455
 456                 case FLASH_SIZE_32KB:
 457                         banks_num = 1;
 458                         sectors_num = 8;
 459                         pages_per_sector = 32;
 460                         page_size  = 128;
 461                         base_address = 0x00100000;
 462                         if (arch == 0x70) {
 463                                 num_nvmbits = 2;
 464                                 target_name_t = "AT91SAM7S321/32";
 465                         }
 466                         if (arch == 0x72) {
 467                                 num_nvmbits = 3;
 468                                 target_name_t = "AT91SAM7SE32";
 469                         }
 470                         break;
 471
 472                 case FLASH_SIZE_64KB:
 473                         banks_num = 1;
 474                         sectors_num = 16;
 475                         pages_per_sector = 32;
 476                         page_size  = 128;
 477                         base_address = 0x00100000;
 478                         if (arch == 0x70) {
 479                                 num_nvmbits = 2;
 480                                 target_name_t = "AT91SAM7S64";
 481                         }
 482                         break;
 483
 484                 case FLASH_SIZE_128KB:
 485                         banks_num = 1;
 486                         sectors_num = 8;
 487                         pages_per_sector = 64;
 488                         page_size  = 256;
 489                         base_address = 0x00100000;
 490                         if (arch == 0x70) {
 491                                 num_nvmbits = 2;
 492                                 target_name_t = "AT91SAM7S128";
 493                         }
 494                         if (arch == 0x71) {
 495                                 num_nvmbits = 3;
 496                                 target_name_t = "AT91SAM7XC128";
 497                         }
 498                         if (arch == 0x72) {
 499                                 num_nvmbits = 3;
 500                                 target_name_t = "AT91SAM7SE128";
 501                         }
 502                         if (arch == 0x75) {
 503                                 num_nvmbits = 3;
 504                                 target_name_t = "AT91SAM7X128";
 505                         }
 506                         break;
 507
 508                 case FLASH_SIZE_256KB:
 509                         banks_num = 1;
 510                         sectors_num = 16;
 511                         pages_per_sector = 64;
 512                         page_size  = 256;
 513                         base_address = 0x00100000;
 514                         if (arch == 0x60) {
 515                                 num_nvmbits = 3;
 516                                 target_name_t = "AT91SAM7A3";
 517                         }
 518                         if (arch == 0x70) {
 519                                 num_nvmbits = 2;
 520                                 target_name_t = "AT91SAM7S256";
 521                         }
 522                         if (arch == 0x71) {
 523                                 num_nvmbits = 3;
 524                                 target_name_t = "AT91SAM7XC256";
 525                         }
 526                         if (arch == 0x72) {
 527                                 num_nvmbits = 3;
 528                                 target_name_t = "AT91SAM7SE256";
 529                         }
 530                         if (arch == 0x75) {
 531                                 num_nvmbits = 3;
 532                                 target_name_t = "AT91SAM7X256";
 533                         }
 534                         break;
 535
 536                 case FLASH_SIZE_512KB:
 537                         banks_num = 2;
 538                         sectors_num = 16;
 539                         pages_per_sector = 64;
 540                         page_size  = 256;
 541                         base_address = 0x00100000;
 542                         if (arch == 0x70) {
 543                                 num_nvmbits = 2;
 544                                 target_name_t = "AT91SAM7S512";
 545                         }
 546                         if (arch == 0x71) {
 547                                 num_nvmbits = 3;
 548                                 target_name_t = "AT91SAM7XC512";
 549                         }
 550                         if (arch == 0x72) {
 551                                 num_nvmbits = 3;
 552                                 target_name_t = "AT91SAM7SE512";
 553                         }
 554                         if (arch == 0x75) {
 555                                 num_nvmbits = 3;
 556                                 target_name_t = "AT91SAM7X512";
 557                         }
 558                         break;
 559
 560                 case FLASH_SIZE_1024KB:
 561                         break;
 562
 563                 case FLASH_SIZE_2048KB:
 564                         break;
 565         }
 566
 567         if (strcmp(target_name_t, "Unknown") == 0) {
 568                 LOG_ERROR(
 569                         "Target autodetection failed! Please specify target parameters in configuration file");
 570                 return ERROR_FLASH_OPERATION_FAILED;
 571         }
 572
 573         ext_freq = at91sam7_info->ext_freq;
 574
 575         /* calculate bank size  */
 576         bank_size = sectors_num * pages_per_sector * page_size;
 577
 578         for (bnk = 0; bnk < banks_num; bnk++) {
 579                 if (bnk > 0) {
 580                         if (!t_bank->next) {
 581                                 /* create a new flash bank element */
 582                                 struct flash_bank *fb = malloc(sizeof(struct flash_bank));
 583                                 fb->target = target;
 584                                 fb->driver = bank->driver;
 585                                 fb->driver_priv = malloc(sizeof(struct at91sam7_flash_bank));
 586                                 fb->name = "sam7_probed";
 587                                 fb->next = NULL;
 588
 589                                 /* link created bank in 'flash_banks' list */
 590                                 t_bank->next = fb;
 591                         }
 592                         t_bank = t_bank->next;
 593                 }
 594
 595                 t_bank->bank_number = bnk;
 596                 t_bank->base = base_address + bnk * bank_size;
 597                 t_bank->size = bank_size;
 598                 t_bank->chip_width = 0;
 599                 t_bank->bus_width = 4;
 600                 t_bank->num_sectors = sectors_num;
 601
 602                 /* allocate sectors */
 603                 t_bank->sectors = malloc(sectors_num * sizeof(struct flash_sector));
 604                 for (sec = 0; sec < sectors_num; sec++) {
 605                         t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
 606                         t_bank->sectors[sec].size = pages_per_sector * page_size;
 607                         t_bank->sectors[sec].is_erased = -1;
 608                         t_bank->sectors[sec].is_protected = -1;
 609                 }
 610
 611                 at91sam7_info = t_bank->driver_priv;
 612
 613                 at91sam7_info->cidr = cidr;
 614                 at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
 615                 at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
 616                 at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
 617                 at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
 618                 at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
 619                 at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
 620                 at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
 621                 at91sam7_info->cidr_version = cidr&0x001F;
 622
 623                 at91sam7_info->target_name  = target_name_t;
 624                 at91sam7_info->flashmode = 0;
 625                 at91sam7_info->ext_freq = ext_freq;
 626                 at91sam7_info->num_nvmbits = num_nvmbits;
 627                 at91sam7_info->num_nvmbits_on = 0;
 628                 at91sam7_info->pagesize = page_size;
 629                 at91sam7_info->pages_per_sector = pages_per_sector;
 630
 631                 /* calculate master clock frequency */
 632                 at91sam7_read_clock_info(t_bank);
 633
 634                 /* no timming */
 635                 at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 636
 637                 /* check protect state */
 638                 at91sam7_protect_check(t_bank);
 639         }
 640
 641         LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x",
 642                 at91sam7_info->cidr_nvptyp,
 643                 at91sam7_info->cidr_arch);
 644
 645         return ERROR_OK;
 646 }
 647
 648 static int at91sam7_erase_check(struct flash_bank *bank)
 649 {
 650         struct target *target = bank->target;
 651         uint16_t retval;
 652         uint32_t blank;
 653         uint16_t fast_check;
 654         uint8_t *buffer;
 655         uint16_t nSector;
 656         uint16_t nByte;
 657
 658         if (bank->target->state != TARGET_HALTED) {
 659                 LOG_ERROR("Target not halted");
 660                 return ERROR_TARGET_NOT_HALTED;
 661         }
 662
 663         /* Configure the flash controller timing */
 664         at91sam7_read_clock_info(bank);
 665         at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
 666
 667         fast_check = 1;
 668         for (nSector = 0; nSector < bank->num_sectors; nSector++) {
 669                 retval = target_blank_check_memory(target,
 670                                 bank->base + bank->sectors[nSector].offset,
 671                                 bank->sectors[nSector].size,
 672                                 &blank);
 673                 if (retval != ERROR_OK) {
 674                         fast_check = 0;
 675                         break;
 676                 }
 677                 if (blank == 0xFF)
 678                         bank->sectors[nSector].is_erased = 1;
 679                 else
 680                         bank->sectors[nSector].is_erased = 0;
 681         }
 682
 683         if (fast_check)
 684                 return ERROR_OK;
 685
 686         LOG_USER("Running slow fallback erase check - add working memory");
 687
 688         buffer = malloc(bank->sectors[0].size);
 689         for (nSector = 0; nSector < bank->num_sectors; nSector++) {
 690                 bank->sectors[nSector].is_erased = 1;
 691                 retval = target_read_memory(target, bank->base + bank->sectors[nSector].offset, 4,
 692                                 bank->sectors[nSector].size/4, buffer);
 693                 if (retval != ERROR_OK)
 694                         return retval;
 695
 696                 for (nByte = 0; nByte < bank->sectors[nSector].size; nByte++) {
 697                         if (buffer[nByte] != 0xFF) {
 698                                 bank->sectors[nSector].is_erased = 0;
 699                                 break;
 700                         }
 701                 }
 702         }
 703         free(buffer);
 704
 705         return ERROR_OK;
 706 }
 707
 708 static int at91sam7_protect_check(struct flash_bank *bank)
 709 {
 710         uint8_t lock_pos, gpnvm_pos;
 711         uint32_t status;
 712
 713         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 714
 715         if (at91sam7_info->cidr == 0)
 716                 return ERROR_FLASH_BANK_NOT_PROBED;
 717         if (bank->target->state != TARGET_HALTED) {
 718                 LOG_ERROR("Target not halted");
 719                 return ERROR_TARGET_NOT_HALTED;
 720         }
 721
 722         status = at91sam7_get_flash_status(bank->target, bank->bank_number);
 723         at91sam7_info->lockbits = (status >> 16);
 724
 725         at91sam7_info->num_lockbits_on = 0;
 726         for (lock_pos = 0; lock_pos < bank->num_sectors; lock_pos++) {
 727                 if (((status >> (16 + lock_pos))&(0x0001)) == 1) {
 728                         at91sam7_info->num_lockbits_on++;
 729                         bank->sectors[lock_pos].is_protected = 1;
 730                 } else
 731                         bank->sectors[lock_pos].is_protected = 0;
 732         }
 733
 734         /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
 735         status = at91sam7_get_flash_status(bank->target, 0);
 736
 737         at91sam7_info->securitybit = (status >> 4)&0x01;
 738         at91sam7_info->nvmbits = (status >> 8)&0xFF;
 739
 740         at91sam7_info->num_nvmbits_on = 0;
 741         for (gpnvm_pos = 0; gpnvm_pos < at91sam7_info->num_nvmbits; gpnvm_pos++) {
 742                 if (((status >> (8 + gpnvm_pos))&(0x01)) == 1)
 743                         at91sam7_info->num_nvmbits_on++;
 744         }
 745
 746         return ERROR_OK;
 747 }
 748
 749 FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command)
 750 {
 751         struct flash_bank *t_bank = bank;
 752         struct at91sam7_flash_bank *at91sam7_info;
 753         struct target *target = t_bank->target;
 754
 755         uint32_t base_address;
 756         uint32_t bank_size;
 757         uint32_t ext_freq = 0;
 758
 759         int chip_width;
 760         int bus_width;
 761         int banks_num;
 762         int num_sectors;
 763
 764         uint16_t pages_per_sector;
 765         uint16_t page_size;
 766         uint16_t num_nvmbits;
 767
 768         char *target_name_t;
 769
 770         int bnk, sec;
 771
 772         at91sam7_info = malloc(sizeof(struct at91sam7_flash_bank));
 773         t_bank->driver_priv = at91sam7_info;
 774
 775         /* part wasn't probed for info yet */
 776         at91sam7_info->cidr = 0;
 777         at91sam7_info->flashmode = 0;
 778         at91sam7_info->ext_freq = 0;
 779         at91sam7_info->flash_autodetection = 0;
 780
 781         if (CMD_ARGC < 13) {
 782                 at91sam7_info->flash_autodetection = 1;
 783                 return ERROR_OK;
 784         }
 785
 786         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], base_address);
 787
 788         COMMAND_PARSE_NUMBER(int, CMD_ARGV[3], chip_width);
 789         COMMAND_PARSE_NUMBER(int, CMD_ARGV[4], bus_width);
 790
 791         COMMAND_PARSE_NUMBER(int, CMD_ARGV[8], banks_num);
 792         COMMAND_PARSE_NUMBER(int, CMD_ARGV[9], num_sectors);
 793         COMMAND_PARSE_NUMBER(u16, CMD_ARGV[10], pages_per_sector);
 794         COMMAND_PARSE_NUMBER(u16, CMD_ARGV[11], page_size);
 795         COMMAND_PARSE_NUMBER(u16, CMD_ARGV[12], num_nvmbits);
 796
 797         if (CMD_ARGC == 14) {
 798                 unsigned long freq;
 799                 COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[13], freq);
 800                 ext_freq = freq * 1000;
 801                 at91sam7_info->ext_freq = ext_freq;
 802         }
 803
 804         if ((bus_width == 0) || (banks_num == 0) || (num_sectors == 0) ||
 805                         (pages_per_sector == 0) || (page_size == 0) || (num_nvmbits == 0)) {
 806                 at91sam7_info->flash_autodetection = 1;
 807                 return ERROR_OK;
 808         }
 809
 810         target_name_t = calloc(strlen(CMD_ARGV[7]) + 1, sizeof(char));
 811         strcpy(target_name_t, CMD_ARGV[7]);
 812
 813         /* calculate bank size  */
 814         bank_size = num_sectors * pages_per_sector * page_size;
 815
 816         for (bnk = 0; bnk < banks_num; bnk++) {
 817                 if (bnk > 0) {
 818                         if (!t_bank->next) {
 819                                 /* create a new bank element */
 820                                 struct flash_bank *fb = malloc(sizeof(struct flash_bank));
 821                                 fb->target = target;
 822                                 fb->driver = bank->driver;
 823                                 fb->driver_priv = malloc(sizeof(struct at91sam7_flash_bank));
 824                                 fb->name = "sam7_probed";
 825                                 fb->next = NULL;
 826
 827                                 /* link created bank in 'flash_banks' list */
 828                                 t_bank->next = fb;
 829                         }
 830                         t_bank = t_bank->next;
 831                 }
 832
 833                 t_bank->bank_number = bnk;
 834                 t_bank->base = base_address + bnk * bank_size;
 835                 t_bank->size = bank_size;
 836                 t_bank->chip_width = chip_width;
 837                 t_bank->bus_width = bus_width;
 838                 t_bank->num_sectors = num_sectors;
 839
 840                 /* allocate sectors */
 841                 t_bank->sectors = malloc(num_sectors * sizeof(struct flash_sector));
 842                 for (sec = 0; sec < num_sectors; sec++) {
 843                         t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
 844                         t_bank->sectors[sec].size = pages_per_sector * page_size;
 845                         t_bank->sectors[sec].is_erased = -1;
 846                         t_bank->sectors[sec].is_protected = -1;
 847                 }
 848
 849                 at91sam7_info = t_bank->driver_priv;
 850
 851                 at91sam7_info->target_name  = target_name_t;
 852                 at91sam7_info->flashmode = 0;
 853                 at91sam7_info->ext_freq  = ext_freq;
 854                 at91sam7_info->num_nvmbits = num_nvmbits;
 855                 at91sam7_info->num_nvmbits_on = 0;
 856                 at91sam7_info->pagesize = page_size;
 857                 at91sam7_info->pages_per_sector = pages_per_sector;
 858         }
 859
 860         return ERROR_OK;
 861 }
 862
 863 static int at91sam7_erase(struct flash_bank *bank, int first, int last)
 864 {
 865         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 866         int sec;
 867         uint32_t nbytes, pos;
 868         uint8_t *buffer;
 869         uint8_t erase_all;
 870
 871         if (at91sam7_info->cidr == 0)
 872                 return ERROR_FLASH_BANK_NOT_PROBED;
 873
 874         if (bank->target->state != TARGET_HALTED) {
 875                 LOG_ERROR("Target not halted");
 876                 return ERROR_TARGET_NOT_HALTED;
 877         }
 878
 879         if ((first < 0) || (last < first) || (last >= bank->num_sectors))
 880                 return ERROR_FLASH_SECTOR_INVALID;
 881
 882         erase_all = 0;
 883         if ((first == 0) && (last == (bank->num_sectors-1)))
 884                 erase_all = 1;
 885
 886         /* Configure the flash controller timing */
 887         at91sam7_read_clock_info(bank);
 888         at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
 889
 890         if (erase_all) {
 891                 if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK)
 892                         return ERROR_FLASH_OPERATION_FAILED;
 893         } else {
 894                 /* allocate and clean buffer  */
 895                 nbytes = (last - first + 1) * bank->sectors[first].size;
 896                 buffer = malloc(nbytes * sizeof(uint8_t));
 897                 for (pos = 0; pos < nbytes; pos++)
 898                         buffer[pos] = 0xFF;
 899
 900                 if (at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK)
 901                         return ERROR_FLASH_OPERATION_FAILED;
 902
 903                 free(buffer);
 904         }
 905
 906         /* mark erased sectors */
 907         for (sec = first; sec <= last; sec++)
 908                 bank->sectors[sec].is_erased = 1;
 909
 910         return ERROR_OK;
 911 }
 912
 913 static int at91sam7_protect(struct flash_bank *bank, int set, int first, int last)
 914 {
 915         uint32_t cmd;
 916         int sector;
 917         uint32_t pagen;
 918
 919         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 920
 921         if (at91sam7_info->cidr == 0)
 922                 return ERROR_FLASH_BANK_NOT_PROBED;
 923
 924         if (bank->target->state != TARGET_HALTED) {
 925                 LOG_ERROR("Target not halted");
 926                 return ERROR_TARGET_NOT_HALTED;
 927         }
 928
 929         if ((first < 0) || (last < first) || (last >= bank->num_sectors))
 930                 return ERROR_FLASH_SECTOR_INVALID;
 931
 932         /* Configure the flash controller timing */
 933         at91sam7_read_clock_info(bank);
 934         at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
 935
 936         for (sector = first; sector <= last; sector++) {
 937                 if (set)
 938                         cmd = SLB;
 939                 else
 940                         cmd = CLB;
 941
 942                 /* if we lock a page from one sector then entire sector will be locked, also,
 943                  * if we unlock a page from a locked sector, entire sector will be unlocked   */
 944                 pagen = sector * at91sam7_info->pages_per_sector;
 945
 946                 if (at91sam7_flash_command(bank, cmd, pagen) != ERROR_OK)
 947                         return ERROR_FLASH_OPERATION_FAILED;
 948         }
 949
 950         at91sam7_protect_check(bank);
 951
 952         return ERROR_OK;
 953 }
 954
 955 static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
 956 {
 957         int retval;
 958         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
 959         struct target *target = bank->target;
 960         uint32_t dst_min_alignment, wcount, bytes_remaining = count;
 961         uint32_t first_page, last_page, pagen, buffer_pos;
 962
 963         if (at91sam7_info->cidr == 0)
 964                 return ERROR_FLASH_BANK_NOT_PROBED;
 965
 966         if (bank->target->state != TARGET_HALTED) {
 967                 LOG_ERROR("Target not halted");
 968                 return ERROR_TARGET_NOT_HALTED;
 969         }
 970
 971         if (offset + count > bank->size)
 972                 return ERROR_FLASH_DST_OUT_OF_BANK;
 973
 974         dst_min_alignment = at91sam7_info->pagesize;
 975
 976         if (offset % dst_min_alignment) {
 977                 LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "",
 978                         offset,
 979                         dst_min_alignment);
 980                 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
 981         }
 982
 983         if (at91sam7_info->cidr_arch == 0)
 984                 return ERROR_FLASH_BANK_NOT_PROBED;
 985
 986         first_page = offset/dst_min_alignment;
 987         last_page = DIV_ROUND_UP(offset + count, dst_min_alignment);
 988
 989         LOG_DEBUG("first_page: %i, last_page: %i, count %i",
 990                 (int)first_page,
 991                 (int)last_page,
 992                 (int)count);
 993
 994         /* Configure the flash controller timing */
 995         at91sam7_read_clock_info(bank);
 996         at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
 997
 998         for (pagen = first_page; pagen < last_page; pagen++) {
 999                 if (bytes_remaining < dst_min_alignment)
1000                         count = bytes_remaining;
1001                 else
1002                         count = dst_min_alignment;
1003                 bytes_remaining -= count;
1004
1005                 /* Write one block to the PageWriteBuffer */
1006                 buffer_pos = (pagen-first_page)*dst_min_alignment;
1007                 wcount = DIV_ROUND_UP(count, 4);
1008                 retval = target_write_memory(target, bank->base + pagen*dst_min_alignment, 4,
1009                                 wcount, buffer + buffer_pos);
1010                 if (retval != ERROR_OK)
1011                         return retval;
1012
1013                 /* Send Write Page command to Flash Controller */
1014                 if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK)
1015                         return ERROR_FLASH_OPERATION_FAILED;
1016                 LOG_DEBUG("Write flash bank:%i page number:%" PRIi32 "", bank->bank_number, pagen);
1017         }
1018
1019         return ERROR_OK;
1020 }
1021
1022 static int at91sam7_probe(struct flash_bank *bank)
1023 {
1024         /* we can't probe on an at91sam7
1025          * if this is an at91sam7, it has the configured flash */
1026         int retval;
1027
1028         if (bank->target->state != TARGET_HALTED) {
1029                 LOG_ERROR("Target not halted");
1030                 return ERROR_TARGET_NOT_HALTED;
1031         }
1032
1033         retval = at91sam7_read_part_info(bank);
1034         if (retval != ERROR_OK)
1035                 return retval;
1036
1037         return ERROR_OK;
1038 }
1039
1040 static int get_at91sam7_info(struct flash_bank *bank, char *buf, int buf_size)
1041 {
1042         int printed;
1043         struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv;
1044
1045         if (at91sam7_info->cidr == 0)
1046                 return ERROR_FLASH_BANK_NOT_PROBED;
1047
1048         printed = snprintf(buf, buf_size,
1049                         "\n at91sam7 driver information: Chip is %s\n",
1050                         at91sam7_info->target_name);
1051
1052         buf += printed;
1053         buf_size -= printed;
1054
1055         printed = snprintf(buf,
1056                         buf_size,
1057                         " Cidr: 0x%8.8" PRIx32 " | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | "
1058                         "Flashsize: 0x%8.8" PRIx32 "\n",
1059                         at91sam7_info->cidr,
1060                         at91sam7_info->cidr_arch,
1061                         EPROC[at91sam7_info->cidr_eproc],
1062                         at91sam7_info->cidr_version,
1063                         bank->size);
1064
1065         buf += printed;
1066         buf_size -= printed;
1067
1068         printed = snprintf(buf, buf_size,
1069                         " Master clock (estimated): %u KHz | External clock: %u KHz\n",
1070                         (unsigned)(at91sam7_info->mck_freq / 1000),
1071                         (unsigned)(at91sam7_info->ext_freq / 1000));
1072
1073         buf += printed;
1074         buf_size -= printed;
1075
1076         printed = snprintf(buf,
1077                         buf_size,
1078                         " Pagesize: %i bytes | Lockbits(%i): %i 0x%4.4x | Pages in lock region: %i\n",
1079                         at91sam7_info->pagesize,
1080                         bank->num_sectors,
1081                         at91sam7_info->num_lockbits_on,
1082                         at91sam7_info->lockbits,
1083                         at91sam7_info->pages_per_sector*at91sam7_info->num_lockbits_on);
1084
1085         buf += printed;
1086         buf_size -= printed;
1087
1088         snprintf(buf, buf_size,
1089                 " Securitybit: %i | Nvmbits(%i): %i 0x%1.1x\n",
1090                 at91sam7_info->securitybit, at91sam7_info->num_nvmbits,
1091                 at91sam7_info->num_nvmbits_on, at91sam7_info->nvmbits);
1092
1093         return ERROR_OK;
1094 }
1095
1096 /*
1097 * On AT91SAM7S: When the gpnvm bits are set with
1098 * > at91sam7 gpnvm bitnr set
1099 * the changes are not visible in the flash controller status register MC_FSR
1100 * until the processor has been reset.
1101 * On the Olimex board this requires a power cycle.
1102 * Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
1103 *   The maximum number of write/erase cycles for Non volatile Memory bits is 100. this includes
1104 *   Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
1105 */
1106 COMMAND_HANDLER(at91sam7_handle_gpnvm_command)
1107 {
1108         struct flash_bank *bank;
1109         int bit;
1110         uint8_t flashcmd;
1111         uint32_t status;
1112         struct at91sam7_flash_bank *at91sam7_info;
1113         int retval;
1114
1115         if (CMD_ARGC != 2)
1116                 return ERROR_COMMAND_SYNTAX_ERROR;
1117
1118         bank = get_flash_bank_by_num_noprobe(0);
1119         if (bank ==  NULL)
1120                 return ERROR_FLASH_BANK_INVALID;
1121         if (strcmp(bank->driver->name, "at91sam7")) {
1122                 command_print(CMD_CTX, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]);
1123                 return ERROR_FLASH_BANK_INVALID;
1124         }
1125         if (bank->target->state != TARGET_HALTED) {
1126                 LOG_ERROR("target has to be halted to perform flash operation");
1127                 return ERROR_TARGET_NOT_HALTED;
1128         }
1129
1130         if (strcmp(CMD_ARGV[1], "set") == 0)
1131                 flashcmd = SGPB;
1132         else if (strcmp(CMD_ARGV[1], "clear") == 0)
1133                 flashcmd = CGPB;
1134         else
1135                 return ERROR_COMMAND_SYNTAX_ERROR;
1136
1137         at91sam7_info = bank->driver_priv;
1138         if (at91sam7_info->cidr == 0) {
1139                 retval = at91sam7_read_part_info(bank);
1140                 if (retval != ERROR_OK)
1141                         return retval;
1142         }
1143
1144         COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], bit);
1145         if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits)) {
1146                 command_print(CMD_CTX,
1147                         "gpnvm bit '#%s' is out of bounds for target %s",
1148                         CMD_ARGV[0],
1149                         at91sam7_info->target_name);
1150                 return ERROR_OK;
1151         }
1152
1153         /* Configure the flash controller timing */
1154         at91sam7_read_clock_info(bank);
1155         at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
1156
1157         if (at91sam7_flash_command(bank, flashcmd, bit) != ERROR_OK)
1158                 return ERROR_FLASH_OPERATION_FAILED;
1159
1160         /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
1161         status = at91sam7_get_flash_status(bank->target, 0);
1162         LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32,
1163                 flashcmd,
1164                 bit,
1165                 status);
1166
1167         /* check protect state */
1168         at91sam7_protect_check(bank);
1169
1170         return ERROR_OK;
1171 }
1172
1173 static const struct command_registration at91sam7_exec_command_handlers[] = {
1174         {
1175                 .name = "gpnvm",
1176                 .handler = at91sam7_handle_gpnvm_command,
1177                 .mode = COMMAND_EXEC,
1178                 .help = "set or clear one General Purpose Non-Volatile Memory "
1179                         "(gpnvm) bit",
1180                 .usage = "bitnum ('set'|'clear')",
1181         },
1182         COMMAND_REGISTRATION_DONE
1183 };
1184 static const struct command_registration at91sam7_command_handlers[] = {
1185         {
1186                 .name = "at91sam7",
1187                 .mode = COMMAND_ANY,
1188                 .help = "at91sam7 flash command group",
1189                 .usage = "",
1190                 .chain = at91sam7_exec_command_handlers,
1191         },
1192         COMMAND_REGISTRATION_DONE
1193 };
1194
1195 struct flash_driver at91sam7_flash = {
1196         .name = "at91sam7",
1197         .usage = "gpnvm <bit> <set | clear>",
1198         .commands = at91sam7_command_handlers,
1199         .flash_bank_command = at91sam7_flash_bank_command,
1200         .erase = at91sam7_erase,
1201         .protect = at91sam7_protect,
1202         .write = at91sam7_write,
1203         .read = default_flash_read,
1204         .probe = at91sam7_probe,
1205         .auto_probe = at91sam7_probe,
1206         .erase_check = at91sam7_erase_check,
1207         .protect_check = at91sam7_protect_check,
1208         .info = get_at91sam7_info,
1209 };