Remove FSF address from GPL notices
[fw/openocd] / src / flash / nand / ecc.c
1 /*
2  * This file contains an ECC algorithm from Toshiba that allows for detection
3  * and correction of 1-bit errors in a 256 byte block of data.
4  *
5  * [ Extracted from the initial code found in some early Linux versions.
6  *   The current Linux code is bigger while being faster, but this is of
7  *   no real benefit when the bottleneck largely remains the JTAG link.  ]
8  *
9  * Copyright (C) 2000-2004 Steven J. Hill (sjhill at realitydiluted.com)
10  *                         Toshiba America Electronics Components, Inc.
11  *
12  * Copyright (C) 2006 Thomas Gleixner <tglx at linutronix.de>
13  *
14  * This file is free software; you can redistribute it and/or modify it
15  * under the terms of the GNU General Public License as published by the
16  * Free Software Foundation; either version 2 or (at your option) any
17  * later version.
18  *
19  * This file is distributed in the hope that it will be useful, but WITHOUT
20  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
21  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
22  * for more details.
23  *
24  * You should have received a copy of the GNU General Public License
25  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
26  *
27  * As a special exception, if other files instantiate templates or use
28  * macros or inline functions from these files, or you compile these
29  * files and link them with other works to produce a work based on these
30  * files, these files do not by themselves cause the resulting work to be
31  * covered by the GNU General Public License. However the source code for
32  * these files must still be made available in accordance with section (3)
33  * of the GNU General Public License.
34  *
35  * This exception does not invalidate any other reasons why a work based on
36  * this file might be covered by the GNU General Public License.
37  */
38
39 #ifdef HAVE_CONFIG_H
40 #include "config.h"
41 #endif
42
43 #include "core.h"
44
45 /*
46  * Pre-calculated 256-way 1 byte column parity
47  */
48 static const uint8_t nand_ecc_precalc_table[] = {
49         0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
50         0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
51         0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
52         0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
53         0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
54         0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
55         0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
56         0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
57         0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
58         0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
59         0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
60         0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
61         0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
62         0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
63         0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
64         0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
65 };
66
67 /*
68  * nand_calculate_ecc - Calculate 3-byte ECC for 256-byte block
69  */
70 int nand_calculate_ecc(struct nand_device *nand, const uint8_t *dat, uint8_t *ecc_code)
71 {
72         uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
73         int i;
74
75         /* Initialize variables */
76         reg1 = reg2 = reg3 = 0;
77
78         /* Build up column parity */
79         for (i = 0; i < 256; i++) {
80                 /* Get CP0 - CP5 from table */
81                 idx = nand_ecc_precalc_table[*dat++];
82                 reg1 ^= (idx & 0x3f);
83
84                 /* All bit XOR = 1 ? */
85                 if (idx & 0x40) {
86                         reg3 ^= (uint8_t) i;
87                         reg2 ^= ~((uint8_t) i);
88                 }
89         }
90
91         /* Create non-inverted ECC code from line parity */
92         tmp1  = (reg3 & 0x80) >> 0; /* B7 -> B7 */
93         tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
94         tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
95         tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
96         tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
97         tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
98         tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
99         tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
100
101         tmp2  = (reg3 & 0x08) << 4; /* B3 -> B7 */
102         tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
103         tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
104         tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
105         tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
106         tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
107         tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
108         tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
109
110         /* Calculate final ECC code */
111 #ifdef NAND_ECC_SMC
112         ecc_code[0] = ~tmp2;
113         ecc_code[1] = ~tmp1;
114 #else
115         ecc_code[0] = ~tmp1;
116         ecc_code[1] = ~tmp2;
117 #endif
118         ecc_code[2] = ((~reg1) << 2) | 0x03;
119
120         return 0;
121 }
122
123 static inline int countbits(uint32_t b)
124 {
125         int res = 0;
126
127         for (; b; b >>= 1)
128                 res += b & 0x01;
129         return res;
130 }
131
132 /**
133  * nand_correct_data - Detect and correct a 1 bit error for 256 byte block
134  */
135 int nand_correct_data(struct nand_device *nand, u_char *dat,
136                 u_char *read_ecc, u_char *calc_ecc)
137 {
138         uint8_t s0, s1, s2;
139
140 #ifdef NAND_ECC_SMC
141         s0 = calc_ecc[0] ^ read_ecc[0];
142         s1 = calc_ecc[1] ^ read_ecc[1];
143         s2 = calc_ecc[2] ^ read_ecc[2];
144 #else
145         s1 = calc_ecc[0] ^ read_ecc[0];
146         s0 = calc_ecc[1] ^ read_ecc[1];
147         s2 = calc_ecc[2] ^ read_ecc[2];
148 #endif
149         if ((s0 | s1 | s2) == 0)
150                 return 0;
151
152         /* Check for a single bit error */
153         if (((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
154                         ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
155                         ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
156
157                 uint32_t byteoffs, bitnum;
158
159                 byteoffs = (s1 << 0) & 0x80;
160                 byteoffs |= (s1 << 1) & 0x40;
161                 byteoffs |= (s1 << 2) & 0x20;
162                 byteoffs |= (s1 << 3) & 0x10;
163
164                 byteoffs |= (s0 >> 4) & 0x08;
165                 byteoffs |= (s0 >> 3) & 0x04;
166                 byteoffs |= (s0 >> 2) & 0x02;
167                 byteoffs |= (s0 >> 1) & 0x01;
168
169                 bitnum = (s2 >> 5) & 0x04;
170                 bitnum |= (s2 >> 4) & 0x02;
171                 bitnum |= (s2 >> 3) & 0x01;
172
173                 dat[byteoffs] ^= (1 << bitnum);
174
175                 return 1;
176         }
177
178         if (countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 << 16)) == 1)
179                 return 1;
180
181         return -1;
182 }