git.gag.com Git - fw/openocd/blob - src/flash/at91sam7.c

   1 /***************************************************************************
   2  *   Copyright (C) 2006 by Magnus Lundin                                   *
   3  *   lundin@mlu.mine.nu                                                        *
   4  *                                                                                                             *
   5  *   This program is free software; you can redistribute it and/or modify  *
   6  *   it under the terms of the GNU General Public License as published by  *
   7  *   the Free Software Foundation; either version 2 of the License, or     *
   8  *   (at your option) any later version.                                   *
   9  *                                                                         *
  10  *   This program is distributed in the hope that it will be useful,       *
  11  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  12  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  13  *   GNU General Public License for more details.                          *
  14  *                                                                         *
  15  *   You should have received a copy of the GNU General Public License     *
  16  *   along with this program; if not, write to the                         *
  17  *   Free Software Foundation, Inc.,                                       *
  18  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  19  ***************************************************************************/
  20
  21 /***************************************************************************
  22 There are some things to notice
  23
  24 * AT91SAM7S64 is tested
  25 * All AT91SAM7Sxx  and  AT91SAM7Xxx should work but is not tested
  26 * All parameters are identified from onchip configuartion registers
  27 *
  28 * The flash controller handles erases automatically on a page (128/265 byte) basis
  29 * Only an EraseAll command is supported by the controller
  30 * Partial erases can be implemented in software by writing one 0xFFFFFFFF word to
  31 * some location in every page in the region to be erased
  32 *
  33 * Lock regions (sectors) are 32 or 64 pages
  34 *
  35  ***************************************************************************/
  36 #ifdef HAVE_CONFIG_H
  37 #include "config.h"
  38 #endif
  39
  40 #include "replacements.h"
  41
  42 #include "at91sam7.h"
  43
  44 #include "flash.h"
  45 #include "target.h"
  46 #include "log.h"
  47 #include "binarybuffer.h"
  48 #include "types.h"
  49
  50 #include <stdlib.h>
  51 #include <string.h>
  52 #include <unistd.h>
  53
  54 int at91sam7_register_commands(struct command_context_s *cmd_ctx);
  55 int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
  56 int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
  57 int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
  58 int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
  59 int at91sam7_probe(struct flash_bank_s *bank);
  60 int at91sam7_erase_check(struct flash_bank_s *bank);
  61 int at91sam7_protect_check(struct flash_bank_s *bank);
  62 int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
  63
  64 u32 at91sam7_get_flash_status(flash_bank_t *bank);
  65 void at91sam7_set_flash_mode(flash_bank_t *bank,int mode);
  66 u8 at91sam7_wait_status_busy(flash_bank_t *bank, int timeout);
  67 int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
  68
  69 flash_driver_t at91sam7_flash =
  70 {
  71         .name = "at91sam7",
  72         .register_commands = at91sam7_register_commands,
  73         .flash_bank_command = at91sam7_flash_bank_command,
  74         .erase = at91sam7_erase,
  75         .protect = at91sam7_protect,
  76         .write = at91sam7_write,
  77         .probe = at91sam7_probe,
  78         .erase_check = at91sam7_erase_check,
  79         .protect_check = at91sam7_protect_check,
  80         .info = at91sam7_info
  81 };
  82
  83
  84 char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
  85 long NVPSIZ[16] = {
  86    0,
  87    0x2000, /*  8K */
  88    0x4000, /* 16K */
  89    0x8000, /* 32K */
  90    -1,
  91    0x10000, /* 64K */
  92    -1,
  93    0x20000, /* 128K */
  94    -1,
  95    0x40000, /* 256K */
  96    0x80000, /* 512K */
  97    -1,
  98    0x100000, /* 1024K */
  99    -1,
 100    0x200000, /* 2048K */
 101    -1
 102 };
 103
 104 long SRAMSIZ[16] = {
 105    -1,
 106    0x0400, /*  1K */
 107    0x0800, /*  2K */
 108    -1,
 109    0x1c000,  /* 112K */
 110    0x1000,  /*   4K */
 111    0x14000, /*  80K */
 112    0x28000, /* 160K */
 113    0x2000,  /*   8K */
 114    0x4000,  /*  16K */
 115    0x8000,  /*  32K */
 116    0x10000, /*  64K */
 117    0x20000, /* 128K */
 118    0x40000, /* 256K */
 119    0x18000, /* 96K */
 120    0x80000, /* 512K */
 121 };
 122
 123 int at91sam7_register_commands(struct command_context_s *cmd_ctx)
 124 {
 125         command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
 126         register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
 127                         "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");
 128
 129         return ERROR_OK;
 130 }
 131
 132 u32 at91sam7_get_flash_status(flash_bank_t *bank)
 133 {
 134         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 135         target_t *target = at91sam7_info->target;
 136         long fsr;
 137
 138         target->type->read_memory(target, MC_FSR, 4, 1, (u8 *)&fsr);
 139
 140         return fsr;
 141 }
 142
 143 /** Read clock configuration and set at91sam7_info->usec_clocks*/
 144 void at91sam7_read_clock_info(flash_bank_t *bank)
 145 {
 146         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 147         target_t *target = at91sam7_info->target;
 148         unsigned long mckr, mcfr, pllr, tmp, status, mainfreq;
 149         unsigned int css, pres, mul, div;
 150
 151         /* Read main clock freqency register */
 152         target->type->read_memory(target, CKGR_MCFR, 4, 1, (u8 *)&mcfr);
 153         /* Read master clock register */
 154         target->type->read_memory(target, PMC_MCKR, 4, 1, (u8 *)&mckr);
 155         /* Read Clock Generator PLL Register  */
 156         target->type->read_memory(target, CKGR_PLLR, 4, 1, (u8 *)&pllr);
 157
 158         pres = (mckr>>2)&0x7;
 159         mul = (pllr>>16)&0x7FF;
 160         div = pllr&0xFF;
 161
 162         at91sam7_info->mck_valid = 0;
 163         switch (mckr & PMC_MCKR_CSS) {
 164         case 0:                 /* Slow Clock */
 165                 at91sam7_info->mck_valid = 1;
 166                 tmp = RC_FREQ;
 167                 break;
 168         case 1:                 /* Main Clock */
 169                 if (mcfr & CKGR_MCFR_MAINRDY)
 170                 {
 171                         at91sam7_info->mck_valid = 1;
 172                         mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
 173                         tmp = mainfreq;
 174                 }
 175                 break;
 176
 177         case 2:                 /* Reserved */
 178                 break;
 179         case 3:         /* PLL Clock */
 180                 if (mcfr & CKGR_MCFR_MAINRDY)
 181                 {
 182                         target->type->read_memory(target, CKGR_PLLR, 4, 1,
 183                                                   (u8 *)&pllr);
 184                         if (!(pllr & CKGR_PLLR_DIV))
 185                                 break; /* 0 Hz */
 186                         at91sam7_info->mck_valid = 1;
 187                         mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
 188                         /* Integer arithmetic should have sufficient precision
 189                            as long as PLL is properly configured. */
 190                         tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *
 191                           (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
 192                 }
 193                 break;
 194         }
 195
 196         /* Prescaler adjust */
 197         if (((mckr & PMC_MCKR_PRES) >> 2) == 7)
 198                 at91sam7_info->mck_valid = 0;
 199         else
 200                 at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
 201
 202         /* Forget old flash timing */
 203         at91sam7_set_flash_mode(bank,0);
 204 }
 205
 206 /* Setup the timimg registers for nvbits or normal flash */
 207 void at91sam7_set_flash_mode(flash_bank_t *bank,int mode)
 208 {
 209         u32 fmcn, fmr;
 210         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 211         target_t *target = at91sam7_info->target;
 212
 213         if (mode && (mode != at91sam7_info->flashmode)) {
 214                 /* Always round up (ceil) */
 215                 if (mode==1)
 216                         /* main clocks in 1uS */
 217                         fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
 218                 else if (mode==2)
 219                         /* main clocks in 1.5uS */
 220                         fmcn = (at91sam7_info->mck_freq/666666ul)+1;
 221
 222                 /* Only allow fmcn=0 if clock period is > 30 us. */
 223                 if (at91sam7_info->mck_freq <= 33333)
 224                         fmcn = 0;
 225
 226                 DEBUG("fmcn: %i", fmcn);
 227                 fmr = fmcn<<16;
 228                 target->type->write_memory(target, MC_FSR, 4, 1, (u8 *)&fmr);
 229         }
 230         at91sam7_info->flashmode = mode;
 231 }
 232
 233 u8 at91sam7_wait_status_busy(flash_bank_t *bank, int timeout)
 234 {
 235         u32 status;
 236
 237         while ((!((status = at91sam7_get_flash_status(bank)) & 0x01)) && (timeout-- > 0))
 238         {
 239                 DEBUG("status: 0x%x", status);
 240                 usleep(1000);
 241         }
 242
 243         DEBUG("status: 0x%x", status);
 244
 245         if (status&0x0C)
 246         {
 247                 ERROR("status register: 0x%x", status);
 248                 if (status & 0x4)
 249                         ERROR("Lock Error Bit Detected, Operation Abort");
 250                 if (status & 0x8)
 251                         ERROR("Invalid command and/or bad keyword, Operation Abort");
 252                 if (status & 0x10)
 253                         ERROR("Security Bit Set, Operation Abort");
 254         }
 255
 256         return status;
 257 }
 258
 259 /* Send one command to the AT91SAM flash controller */
 260 int at91sam7_flash_command(struct flash_bank_s *bank,u8 cmd,u16 pagen)
 261 {
 262         u32 fcr;
 263         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 264         target_t *target = at91sam7_info->target;
 265
 266         fcr = (0x5A<<24) | (pagen<<8) | cmd;
 267         target->type->write_memory(target, MC_FCR, 4, 1, (u8 *)&fcr);
 268         DEBUG("Flash command: 0x%x, pagenumber:", fcr, pagen);
 269
 270         if (at91sam7_wait_status_busy(bank, 10)&0x0C)
 271         {
 272                 return ERROR_FLASH_OPERATION_FAILED;
 273         }
 274         return ERROR_OK;
 275 }
 276
 277 /* Read device id register, main clock frequency register and fill in driver info structure */
 278 int at91sam7_read_part_info(struct flash_bank_s *bank)
 279 {
 280         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 281         target_t *target = at91sam7_info->target;
 282         unsigned long cidr, mcfr, status;
 283
 284         if (at91sam7_info->target->state != TARGET_HALTED)
 285         {
 286                 return ERROR_TARGET_NOT_HALTED;
 287         }
 288
 289         /* Read and parse chip identification register */
 290         target->type->read_memory(target, DBGU_CIDR, 4, 1, (u8 *)&cidr);
 291
 292         if (cidr == 0)
 293         {
 294                 WARNING("Cannot identify target as an AT91SAM");
 295                 return ERROR_FLASH_OPERATION_FAILED;
 296         }
 297
 298         at91sam7_info->cidr = cidr;
 299         at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
 300         at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
 301         at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
 302         at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
 303         at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
 304         at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
 305         at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
 306         at91sam7_info->cidr_version = cidr&0x001F;
 307         bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];
 308         at91sam7_info->target_name = "Unknown";
 309
 310         DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
 311
 312         /* Read main and master clock freqency register */
 313         at91sam7_read_clock_info(bank);
 314
 315         status = at91sam7_get_flash_status(bank);
 316         at91sam7_info->lockbits = status>>16;
 317         at91sam7_info->securitybit = (status>>4)&0x01;
 318
 319         if (at91sam7_info->cidr_arch == 0x70 )
 320         {
 321                 at91sam7_info->num_nvmbits = 2;
 322                 at91sam7_info->nvmbits = (status>>8)&0x03;
 323                 bank->base = 0x100000;
 324                 bank->bus_width = 4;
 325                 if (bank->size==0x40000)  /* AT91SAM7S256 */
 326                 {
 327                         at91sam7_info->target_name = "AT91SAM7S256";
 328                         at91sam7_info->num_lockbits = 16;
 329                         at91sam7_info->pagesize = 256;
 330                         at91sam7_info->pages_in_lockregion = 64;
 331                         at91sam7_info->num_pages = 16*64;
 332                 }
 333                 if (bank->size==0x20000)  /* AT91SAM7S128 */
 334                 {
 335                         at91sam7_info->target_name = "AT91SAM7S128";
 336                         at91sam7_info->num_lockbits = 8;
 337                         at91sam7_info->pagesize = 256;
 338                         at91sam7_info->pages_in_lockregion = 64;
 339                         at91sam7_info->num_pages = 8*64;
 340                 }
 341                 if (bank->size==0x10000)  /* AT91SAM7S64 */
 342                 {
 343                         at91sam7_info->target_name = "AT91SAM7S64";
 344                         at91sam7_info->num_lockbits = 16;
 345                         at91sam7_info->pagesize = 128;
 346                         at91sam7_info->pages_in_lockregion = 32;
 347                         at91sam7_info->num_pages = 16*32;
 348                 }
 349                 if (bank->size==0x08000)  /* AT91SAM7S321/32 */
 350                 {
 351                         at91sam7_info->target_name = "AT91SAM7S321/32";
 352                         at91sam7_info->num_lockbits = 8;
 353                         at91sam7_info->pagesize = 128;
 354                         at91sam7_info->pages_in_lockregion = 32;
 355                         at91sam7_info->num_pages = 8*32;
 356                 }
 357
 358                 return ERROR_OK;
 359         }
 360
 361         if (at91sam7_info->cidr_arch == 0x71 )
 362         {
 363                 at91sam7_info->num_nvmbits = 2;
 364                 at91sam7_info->nvmbits = (status>>8)&0x03;
 365                 bank->base = 0x100000;
 366                 bank->bus_width = 4;
 367                 if (bank->size==0x40000)  /* AT91SAM7XC256 */
 368                 {
 369                         at91sam7_info->target_name = "AT91SAM7XC256";
 370                         at91sam7_info->num_lockbits = 16;
 371                         at91sam7_info->pagesize = 256;
 372                         at91sam7_info->pages_in_lockregion = 64;
 373                         at91sam7_info->num_pages = 16*64;
 374                 }
 375                 if (bank->size==0x20000)  /* AT91SAM7XC128 */
 376                 {
 377                         at91sam7_info->target_name = "AT91SAM7XC128";
 378                         at91sam7_info->num_lockbits = 8;
 379                         at91sam7_info->pagesize = 256;
 380                         at91sam7_info->pages_in_lockregion = 64;
 381                         at91sam7_info->num_pages = 8*64;
 382                 }
 383
 384                 return ERROR_OK;
 385         }
 386
 387         if (at91sam7_info->cidr_arch == 0x75 )
 388         {
 389                 at91sam7_info->num_nvmbits = 3;
 390                 at91sam7_info->nvmbits = (status>>8)&0x07;
 391                 bank->base = 0x100000;
 392                 bank->bus_width = 4;
 393                 if (bank->size==0x40000)  /* AT91SAM7X256 */
 394                 {
 395                         at91sam7_info->target_name = "AT91SAM7X256";
 396                         at91sam7_info->num_lockbits = 16;
 397                         at91sam7_info->pagesize = 256;
 398                         at91sam7_info->pages_in_lockregion = 64;
 399                         at91sam7_info->num_pages = 16*64;
 400                 }
 401                 if (bank->size==0x20000)  /* AT91SAM7X128 */
 402                 {
 403                         at91sam7_info->target_name = "AT91SAM7X128";
 404                         at91sam7_info->num_lockbits = 8;
 405                         at91sam7_info->pagesize = 256;
 406                         at91sam7_info->pages_in_lockregion = 64;
 407                         at91sam7_info->num_pages = 8*64;
 408                 }
 409
 410                 return ERROR_OK;
 411         }
 412
 413         if (at91sam7_info->cidr_arch == 0x60 )
 414         {
 415                 at91sam7_info->num_nvmbits = 3;
 416                 at91sam7_info->nvmbits = (status>>8)&0x07;
 417                 bank->base = 0x100000;
 418                 bank->bus_width = 4;
 419
 420                 if (bank->size == 0x40000)  /* AT91SAM7A3 */
 421                 {
 422                         at91sam7_info->target_name = "AT91SAM7A3";
 423                         at91sam7_info->num_lockbits = 16;
 424                         at91sam7_info->pagesize = 256;
 425                         at91sam7_info->pages_in_lockregion = 64;
 426                         at91sam7_info->num_pages = 16*64;
 427                 }
 428                 return ERROR_OK;
 429         }
 430
 431    WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");
 432
 433    return ERROR_OK;
 434 }
 435
 436 int at91sam7_erase_check(struct flash_bank_s *bank)
 437 {
 438         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 439         target_t *target = at91sam7_info->target;
 440         int i;
 441
 442         if (!at91sam7_info->working_area_size)
 443         {
 444         }
 445         else
 446         {
 447         }
 448
 449         return ERROR_OK;
 450 }
 451
 452 int at91sam7_protect_check(struct flash_bank_s *bank)
 453 {
 454         u32 status;
 455
 456         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 457         target_t *target = at91sam7_info->target;
 458
 459         if (at91sam7_info->cidr == 0)
 460         {
 461                 at91sam7_read_part_info(bank);
 462         }
 463
 464         if (at91sam7_info->cidr == 0)
 465         {
 466                 WARNING("Cannot identify target as an AT91SAM");
 467                 return ERROR_FLASH_OPERATION_FAILED;
 468         }
 469
 470         status = at91sam7_get_flash_status(bank);
 471         at91sam7_info->lockbits = status>>16;
 472
 473         return ERROR_OK;
 474 }
 475
 476 int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
 477 {
 478         at91sam7_flash_bank_t *at91sam7_info;
 479
 480         if (argc < 6)
 481         {
 482                 WARNING("incomplete flash_bank at91sam7 configuration");
 483                 return ERROR_FLASH_BANK_INVALID;
 484         }
 485
 486         at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
 487         bank->driver_priv = at91sam7_info;
 488
 489         at91sam7_info->target = get_target_by_num(strtoul(args[5], NULL, 0));
 490         if (!at91sam7_info->target)
 491         {
 492                 ERROR("no target '%i' configured", args[5]);
 493                 exit(-1);
 494         }
 495
 496
 497         /* part wasn't probed for info yet */
 498         at91sam7_info->cidr = 0;
 499
 500         return ERROR_OK;
 501 }
 502
 503 int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
 504 {
 505         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 506
 507         if (at91sam7_info->target->state != TARGET_HALTED)
 508         {
 509                 return ERROR_TARGET_NOT_HALTED;
 510         }
 511
 512         if (at91sam7_info->cidr == 0)
 513         {
 514                 at91sam7_read_part_info(bank);
 515         }
 516
 517         if (at91sam7_info->cidr == 0)
 518         {
 519                 WARNING("Cannot identify target as an AT91SAM");
 520                 return ERROR_FLASH_OPERATION_FAILED;
 521         }
 522
 523         if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
 524         {
 525                 return ERROR_FLASH_SECTOR_INVALID;
 526         }
 527
 528         /* Configure the flash controller timing */
 529         at91sam7_read_clock_info(bank);
 530         at91sam7_set_flash_mode(bank,2);
 531
 532         if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))
 533         {
 534                 return at91sam7_flash_command(bank, EA, 0);
 535         }
 536
 537         WARNING("Can only erase the whole flash area, pages are autoerased on write");
 538         return ERROR_FLASH_OPERATION_FAILED;
 539 }
 540
 541 int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
 542 {
 543         u32 cmd, pagen, status;
 544         int lockregion;
 545
 546         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 547         target_t *target = at91sam7_info->target;
 548
 549         if (at91sam7_info->target->state != TARGET_HALTED)
 550         {
 551                 return ERROR_TARGET_NOT_HALTED;
 552         }
 553
 554         if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
 555         {
 556                 return ERROR_FLASH_SECTOR_INVALID;
 557         }
 558
 559         if (at91sam7_info->cidr == 0)
 560         {
 561                 at91sam7_read_part_info(bank);
 562         }
 563
 564         if (at91sam7_info->cidr == 0)
 565         {
 566                 WARNING("Cannot identify target as an AT91SAM");
 567                 return ERROR_FLASH_OPERATION_FAILED;
 568         }
 569
 570         /* Configure the flash controller timing */
 571         at91sam7_read_clock_info(bank);
 572         at91sam7_set_flash_mode(bank,1);
 573
 574         for (lockregion=first;lockregion<=last;lockregion++)
 575         {
 576                 pagen = lockregion*at91sam7_info->pages_in_lockregion;
 577                 if (set)
 578                          cmd = SLB;
 579                 else
 580                          cmd = CLB;
 581                 if (at91sam7_flash_command(bank, cmd, pagen) != ERROR_OK)
 582                 {
 583                         return ERROR_FLASH_OPERATION_FAILED;
 584                 }
 585         }
 586
 587         status = at91sam7_get_flash_status(bank);
 588         at91sam7_info->lockbits = status>>16;
 589
 590         return ERROR_OK;
 591 }
 592
 593
 594 int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
 595 {
 596         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 597         target_t *target = at91sam7_info->target;
 598         u32 dst_min_alignment, wcount, bytes_remaining = count;
 599         u32 first_page, last_page, pagen, buffer_pos;
 600         u32 fcr;
 601
 602         if (at91sam7_info->target->state != TARGET_HALTED)
 603         {
 604                 return ERROR_TARGET_NOT_HALTED;
 605         }
 606
 607         if (at91sam7_info->cidr == 0)
 608         {
 609                 at91sam7_read_part_info(bank);
 610         }
 611
 612         if (at91sam7_info->cidr == 0)
 613         {
 614                 WARNING("Cannot identify target as an AT91SAM");
 615                 return ERROR_FLASH_OPERATION_FAILED;
 616         }
 617
 618         if (offset + count > bank->size)
 619                 return ERROR_FLASH_DST_OUT_OF_BANK;
 620
 621         dst_min_alignment = at91sam7_info->pagesize;
 622
 623         if (offset % dst_min_alignment)
 624         {
 625                 WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
 626                 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
 627         }
 628
 629         if (offset + count > bank->size)
 630                 return ERROR_FLASH_DST_OUT_OF_BANK;
 631
 632         if (at91sam7_info->cidr_arch == 0)
 633                 return ERROR_FLASH_BANK_NOT_PROBED;
 634
 635         first_page = offset/dst_min_alignment;
 636         last_page = CEIL(offset + count, dst_min_alignment);
 637
 638         DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
 639
 640         /* Configure the flash controller timing */
 641         at91sam7_read_clock_info(bank);
 642         at91sam7_set_flash_mode(bank,2);
 643
 644         for (pagen=first_page; pagen<last_page; pagen++) {
 645                 if (bytes_remaining<dst_min_alignment)
 646                 count = bytes_remaining;
 647                 else
 648                 count = dst_min_alignment;
 649                 bytes_remaining -= count;
 650
 651                 /* Write one block to the PageWriteBuffer */
 652                 buffer_pos = (pagen-first_page)*dst_min_alignment;
 653                 wcount = CEIL(count,4);
 654                 target->type->write_memory(target, bank->base, 4, wcount, buffer+buffer_pos);
 655
 656                 /* Send Write Page command to Flash Controller */
 657                 if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK)
 658                 {
 659                         return ERROR_FLASH_OPERATION_FAILED;
 660                 }
 661                 DEBUG("Flash command: 0x%x, pagenumber:", fcr, pagen);
 662         }
 663
 664         return ERROR_OK;
 665 }
 666
 667
 668 int at91sam7_probe(struct flash_bank_s *bank)
 669 {
 670         /* we can't probe on an at91sam7
 671          * if this is an at91sam7, it has the configured flash
 672          */
 673         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 674
 675         if (at91sam7_info->cidr == 0)
 676         {
 677                 at91sam7_read_part_info(bank);
 678         }
 679
 680         if (at91sam7_info->cidr == 0)
 681         {
 682                 WARNING("Cannot identify target as an AT91SAM");
 683                 return ERROR_FLASH_OPERATION_FAILED;
 684         }
 685         return ERROR_OK;
 686 }
 687
 688 int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
 689 {
 690         int printed;
 691         at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
 692
 693         at91sam7_read_part_info(bank);
 694
 695         if (at91sam7_info->cidr == 0)
 696         {
 697                 printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");
 698                 buf += printed;
 699                 buf_size -= printed;
 700                 return ERROR_FLASH_OPERATION_FAILED;
 701         }
 702
 703         printed = snprintf(buf, buf_size, "\nat91sam7 information:\n");
 704         buf += printed;
 705         buf_size -= printed;
 706
 707         printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x,  flashsize: 0x%8.8x\n", at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);
 708         buf += printed;
 709         buf_size -= printed;
 710
 711         printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);
 712         buf += printed;
 713         buf_size -= printed;
 714
 715         if (at91sam7_info->num_lockbits>0) {
 716                 printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits,at91sam7_info->num_pages/at91sam7_info->num_lockbits);
 717                 buf += printed;
 718                 buf_size -= printed;
 719         }
 720
 721         printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);
 722         buf += printed;
 723         buf_size -= printed;
 724
 725         return ERROR_OK;
 726 }
 727
 728 /*
 729 * On AT91SAM7S: When the gpnmv bits are set with
 730 * > at91sam7 gpnvm 0 bitnr set
 731 * the changes are not visible in the flash controller status register MC_FSR
 732 * until the processor has been reset.
 733 * On the Olimex board this requires a power cycle.
 734 * Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
 735 *       The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes
 736 *       Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
 737 */
 738 int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 739 {
 740         flash_bank_t *bank;
 741         int bit;
 742         u8  flashcmd;
 743         u32 status;
 744         char *value;
 745         at91sam7_flash_bank_t *at91sam7_info;
 746
 747         if (argc < 3)
 748         {
 749                 command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");
 750                 return ERROR_OK;
 751         }
 752
 753         bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
 754         bit = atoi(args[1]);
 755         value = args[2];
 756
 757         if (!bank)
 758         {
 759                 command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
 760                 return ERROR_OK;
 761         }
 762
 763         at91sam7_info = bank->driver_priv;
 764
 765         if (at91sam7_info->target->state != TARGET_HALTED)
 766         {
 767                 return ERROR_TARGET_NOT_HALTED;
 768         }
 769
 770         if (at91sam7_info->cidr == 0)
 771         {
 772                 at91sam7_read_part_info(bank);
 773         }
 774
 775         if (at91sam7_info->cidr == 0)
 776         {
 777                 WARNING("Cannot identify target as an AT91SAM");
 778                 return ERROR_FLASH_OPERATION_FAILED;
 779         }
 780
 781         if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))
 782         {
 783                 command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);
 784                 return ERROR_OK;
 785         }
 786
 787         if (strcmp(value, "set") == 0)
 788         {
 789                 flashcmd = SGPB;
 790         }
 791         else if (strcmp(value, "clear") == 0)
 792         {
 793                 flashcmd = CGPB;
 794         }
 795         else
 796         {
 797                 command_print(cmd_ctx, "usage: at91sam7 gpnvm <num> <bit> <set|clear>");
 798                 return ERROR_OK;
 799         }
 800
 801         /* Configure the flash controller timing */
 802         at91sam7_read_clock_info(bank);
 803         at91sam7_set_flash_mode(bank,1);
 804
 805         if (at91sam7_flash_command(bank, flashcmd, (u16)(bit)) != ERROR_OK)
 806         {
 807                 return ERROR_FLASH_OPERATION_FAILED;
 808         }
 809
 810         status = at91sam7_get_flash_status(bank);
 811         DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);
 812         at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);
 813
 814         return ERROR_OK;
 815 }