2 ds390 specific general functions.
4 Note that mlh prepended _ds390_ on the static functions. Makes
5 it easier to set a breakpoint using the debugger.
13 #include "../SDCCutil.h"
14 extern const char *preArgv[128]; /* pre-processor arguments */
15 static char _defaultRules[] =
20 /* list of key words used by msc51 */
21 static char *_ds390_keywords[] =
49 static builtins __ds390_builtins[] = {
50 { "__builtin_memcpy_x2x","v",3,{"cx*","cx*","i"}}, /* void __builtin_memcpy_x2x (xdata char *,xdata char *,int) */
51 { "__builtin_memcpy_c2x","v",3,{"cx*","cp*","i"}}, /* void __builtin_memcpy_c2x (xdata char *,code char *,int) */
52 { "__builtin_memset_x","v",3,{"cx*","c","i"}}, /* void __builtin_memset (xdata char *,char,int) */
53 /* __builtin_inp - used to read from a memory mapped port, increment first pointer */
54 { "__builtin_inp","v",3,{"cx*","cx*","i"}}, /* void __builtin_inp (xdata char *,xdata char *,int) */
55 /* __builtin_inp - used to write to a memory mapped port, increment first pointer */
56 { "__builtin_outp","v",3,{"cx*","cx*","i"}}, /* void __builtin_outp (xdata char *,xdata char *,int) */
57 { "__builtin_swapw","us",1,{"us"}}, /* unsigned short __builtin_swapw (unsigned short) */
58 { "__builtin_memcmp_x2x","c",3,{"cx*","cx*","i"}}, /* void __builtin_memcmp_x2x (xdata char *,xdata char *,int) */
59 { "__builtin_memcmp_c2x","c",3,{"cx*","cp*","i"}}, /* void __builtin_memcmp_c2x (xdata char *,code char *,int) */
60 { NULL , NULL,0, {NULL}} /* mark end of table */
62 void ds390_assignRegisters (eBBlock ** ebbs, int count);
64 static int regParmFlg = 0; /* determine if we can register a parameter */
69 asm_addTree (&asm_asxxxx_mapping);
73 _ds390_reset_regparm ()
79 _ds390_regparm (sym_link * l)
82 if (options.parms_in_bank1 == 0) {
83 /* simple can pass only the first parameter in a register */
90 int size = getSize(l);
93 /* first one goes the usual way to DPTR */
94 if (regParmFlg == 0) {
98 /* second one onwards goes to RB1_0 thru RB1_7 */
99 remain = regParmFlg - 4;
100 if (size > (8 - remain)) {
105 return regParmFlg - size + 1;
110 _ds390_parseOptions (int *pargc, char **argv, int *i)
112 /* TODO: allow port-specific command line options to specify
113 * segment names here.
119 _ds390_finaliseOptions (void)
121 if (options.noXinitOpt) {
125 /* Hack-o-matic: if we are using the flat24 model,
126 * adjust pointer sizes.
128 if (options.model != MODEL_FLAT24) {
130 "*** warning: ds390 port small and large model experimental.\n");
131 if (options.model == MODEL_LARGE)
133 port->mem.default_local_map = xdata;
134 port->mem.default_globl_map = xdata;
138 port->mem.default_local_map = data;
139 port->mem.default_globl_map = data;
143 port->s.fptr_size = 3;
144 port->s.gptr_size = 4;
146 port->stack.isr_overhead += 2; /* Will save dpx on ISR entry. */
148 port->stack.call_overhead += 2; /* This acounts for the extra byte
149 * of return addres on the stack.
150 * but is ugly. There must be a
154 port->mem.default_local_map = xdata;
155 port->mem.default_globl_map = xdata;
157 if (!options.stack10bit)
160 "*** error: ds390 port only supports the 10 bit stack mode.\n");
162 if (!options.stack_loc) options.stack_loc = 0x400008;
165 /* generate native code 16*16 mul/div */
166 if (options.useAccelerator)
167 port->support.muldiv=2;
169 port->support.muldiv=1;
171 /* Fixup the memory map for the stack; it is now in
172 * far space and requires a FPOINTER to access it.
175 istack->ptrType = FPOINTER;
177 if (options.parms_in_bank1) {
178 addToList (preArgv, "-DSDCC_PARMS_IN_BANK1");
184 _ds390_setDefaultOptions (void)
186 options.model=MODEL_FLAT24;
187 options.stack10bit=1;
191 _ds390_getRegName (struct regs *reg)
199 _ds390_genAssemblerPreamble (FILE * of)
201 if (options.model == MODEL_FLAT24)
202 fputs (".flat24 on\t\t; 24 bit flat addressing\n", of);
204 fputs ("dpx = 0x93\t\t; dpx register unknown to assembler\n", of);
205 fputs ("dps = 0x86\t\t; dps register unknown to assembler\n", of);
206 fputs ("dpl1 = 0x84\t\t; dpl1 register unknown to assembler\n", of);
207 fputs ("dph1 = 0x85\t\t; dph1 register unknown to assembler\n", of);
208 fputs ("dpx1 = 0x95\t\t; dpx1 register unknown to assembler\n", of);
209 fputs ("ap = 0x9C\t\t; ap register unknown to assembler\n", of);
210 fputs ("_ap = 0x9C\t\t; _ap register unknown to assembler\n", of);
211 fputs ("mcnt0 = 0xD1\t\t; mcnt0 register unknown to assembler\n", of);
212 fputs ("mcnt1 = 0xD2\t\t; mcnt1 register unknown to assembler\n", of);
213 fputs ("ma = 0xD3\t\t; ma register unknown to assembler\n", of);
214 fputs ("mb = 0xD4\t\t; mb register unknown to assembler\n", of);
215 fputs ("mc = 0xD5\t\t; mc register unknown to assembler\n", of);
216 fputs ("F1 = 0xD1\t\t; F1 user flag unknown to assembler\n", of);
217 fputs ("esp = 0x9B\t\t; ESP user flag unknown to assembler\n", of);
218 if (options.parms_in_bank1) {
220 for (i=0; i < 8 ; i++ )
221 fprintf (of,"b1_%d = 0x%x \n",i,8+i);
225 /* Generate interrupt vector table. */
227 _ds390_genIVT (FILE * of, symbol ** interrupts, int maxInterrupts)
231 if (options.model != MODEL_FLAT24)
233 /* Let the default code handle it. */
237 fprintf (of, "\tajmp\t__reset_vect\n");
239 /* now for the other interrupts */
240 for (i = 0; i < maxInterrupts; i++)
244 fprintf (of, "\tljmp\t%s\n\t.ds\t4\n", interrupts[i]->rname);
248 fprintf (of, "\treti\n\t.ds\t7\n");
252 fprintf (of, "__reset_vect:\n\tljmp\t__sdcc_gsinit_startup\n");
257 /* Generate code to copy XINIT to XISEG */
258 static void _ds390_genXINIT (FILE * of) {
259 fprintf (of, "; _ds390_genXINIT() start\n");
260 fprintf (of, " mov a,#l_XINIT\n");
261 fprintf (of, " orl a,#l_XINIT>>8\n");
262 fprintf (of, " jz 00003$\n");
263 fprintf (of, " mov a,#s_XINIT\n");
264 fprintf (of, " add a,#l_XINIT\n");
265 fprintf (of, " mov r1,a\n");
266 fprintf (of, " mov a,#s_XINIT>>8\n");
267 fprintf (of, " addc a,#l_XINIT>>8\n");
268 fprintf (of, " mov r2,a\n");
269 fprintf (of, " mov dptr,#s_XINIT\n");
270 fprintf (of, " mov dps,#0x21\n");
271 fprintf (of, " mov dptr,#s_XISEG\n");
272 fprintf (of, "00001$: clr a\n");
273 fprintf (of, " movc a,@a+dptr\n");
274 fprintf (of, " movx @dptr,a\n");
275 fprintf (of, " inc dptr\n");
276 fprintf (of, " inc dptr\n");
277 fprintf (of, "00002$: mov a,dpl\n");
278 fprintf (of, " cjne a,ar1,00001$\n");
279 fprintf (of, " mov a,dph\n");
280 fprintf (of, " cjne a,ar2,00001$\n");
281 fprintf (of, " mov dps,#0\n");
282 fprintf (of, "00003$:\n");
283 fprintf (of, "; _ds390_genXINIT() end\n");
286 /* Do CSE estimation */
287 static bool cseCostEstimation (iCode *ic, iCode *pdic)
289 operand *result = IC_RESULT(ic);
290 //operand *right = IC_RIGHT(ic);
291 //operand *left = IC_LEFT(ic);
292 sym_link *result_type = operandType(result);
293 //sym_link *right_type = (right ? operandType(right) : 0);
294 //sym_link *left_type = (left ? operandType(left) : 0);
296 /* if it is a pointer then return ok for now */
297 if (IC_RESULT(ic) && IS_PTR(result_type)) return 1;
299 /* if bitwise | add & subtract then no since mcs51 is pretty good at it
300 so we will cse only if they are local (i.e. both ic & pdic belong to
301 the same basic block */
302 if (IS_BITWISE_OP(ic) || ic->op == '+' || ic->op == '-') {
303 /* then if they are the same Basic block then ok */
304 if (ic->eBBlockNum == pdic->eBBlockNum) return 1;
308 /* for others it is cheaper to do the cse */
311 /** $1 is always the basename.
312 $2 is always the output file.
314 $l is the list of extra options that should be there somewhere...
315 MUST be terminated with a NULL.
317 static const char *_linkCmd[] =
319 "aslink", "-nf", "$1", NULL
322 /* $3 is replaced by assembler.debug_opts resp. port->assembler.plain_opts */ static const char *_asmCmd[] =
324 "asx8051", "$l", "$3", "$1.asm", NULL
332 "DS80C390", /* Target name */
335 TRUE, /* Emit glue around main */
336 MODEL_SMALL | MODEL_LARGE | MODEL_FLAT24,
342 "-plosgffc", /* Options with debug */
343 "-plosgff", /* Options without debug */
346 NULL /* no do_assemble function */
358 /* Sizes: char, short, int, long, ptr, fptr, gptr, bit, float, max */
359 1, 2, 2, 4, 1, 2, 3, 1, 4, 4
374 "XISEG (XDATA)", // initialized xdata
375 "XINIT (CODE)", // a code copy of xiseg
383 /* ds390 has an 16 bit mul & div */
391 _ds390_finaliseOptions,
392 _ds390_setDefaultOptions,
393 ds390_assignRegisters,
396 _ds390_genAssemblerPreamble,
397 NULL, /* no genAssemblerEnd */
400 _ds390_reset_regparm,
408 1, /* transform <= to ! > */
409 1, /* transform >= to ! < */
410 1, /* transform != to !(a == b) */
412 TRUE, /* we support array initializers. */
414 __ds390_builtins, /* table of builtin functions */
415 GPOINTER, /* treat unqualified pointers as "generic" pointers */
416 1, /* reset labelKey to 1 */
417 1, /* globals & local static allowed */
421 /*---------------------------------------------------------------------------------*/
422 /* TININative specific */
423 /*---------------------------------------------------------------------------------*/
425 static void _tininative_init (void)
427 asm_addTree (&asm_a390_mapping);
430 static void _tininative_setDefaultOptions (void)
432 options.model=MODEL_FLAT24;
433 options.stack10bit=1;
434 options.stackAuto = 1;
437 static void _tininative_finaliseOptions (void)
439 /* Hack-o-matic: if we are using the flat24 model,
440 * adjust pointer sizes.
442 if (options.model != MODEL_FLAT24) {
443 options.model = MODEL_FLAT24 ;
444 fprintf(stderr,"TININative supports only MODEL FLAT24\n");
446 port->s.fptr_size = 3;
447 port->s.gptr_size = 4;
449 port->stack.isr_overhead += 2; /* Will save dpx on ISR entry. */
451 port->stack.call_overhead += 2; /* This acounts for the extra byte
452 * of return addres on the stack.
453 * but is ugly. There must be a
457 port->mem.default_local_map = xdata;
458 port->mem.default_globl_map = xdata;
460 if (!options.stack10bit) {
461 options.stack10bit = 1;
462 fprintf(stderr,"TININative supports only stack10bit \n");
465 if (!options.stack_loc) options.stack_loc = 0x400008;
467 /* generate native code 16*16 mul/div */
468 if (options.useAccelerator)
469 port->support.muldiv=2;
471 port->support.muldiv=1;
473 /* Fixup the memory map for the stack; it is now in
474 * far space and requires a FPOINTER to access it.
477 istack->ptrType = FPOINTER;
481 static int _tininative_genIVT (FILE * of, symbol ** interrupts, int maxInterrupts)
485 static void _tininative_genAssemblerPreamble (FILE * of)
487 fputs("$include(tini.inc)\n", of);
488 fputs("$include(ds80c390.inc)\n", of);
489 fputs("$include(tinimacro.inc)\n", of);
490 fputs("$include(apiequ.inc)\n", of);
491 fputs("_bpx EQU 01Eh \t\t; _bpx (frame pointer) mapped to R8_B3:R7_B3\n", of);
492 fputs("_ap EQU 01Dh \t\t; _ap mapped to R6_B3\n", of);
493 /* Must be first and return 0 */
494 fputs("Lib_Native_Init:\n",of);
495 fputs("\tclr\ta\n",of);
497 fputs("LibraryID:\n",of);
498 fputs("\tdb \"DS\"\n",of);
499 if (options.tini_libid) {
500 fprintf(of,"\tdb 0,0,0%02xh,0%02xh,0%02xh,0%02xh\n",
501 (options.tini_libid>>24 & 0xff),
502 (options.tini_libid>>16 & 0xff),
503 (options.tini_libid>>8 & 0xff),
504 (options.tini_libid & 0xff));
506 fprintf(of,"\tdb 0,0,0,0,0,1\n");
510 static void _tininative_genAssemblerEnd (FILE * of)
514 /* tininative assembler , calls "macro", if it succeeds calls "a390" */
515 static void _tininative_do_assemble (const char * const *asmOptions)
517 static const char *macroCmd[] = {
518 "macro","$1.a51",NULL
520 static const char *a390Cmd[] = {
525 buildCmdLine(buffer,macroCmd,dstFileName,NULL,NULL,NULL);
526 if (my_system(buffer)) {
529 buildCmdLine(buffer,a390Cmd,dstFileName,NULL,NULL,asmOptions);
530 if (my_system(buffer)) {
535 /* list of key words used by TININative */
536 static char *_tininative_keywords[] =
565 static builtins __tininative_builtins[] = {
566 { "__builtin_memcpy_x2x","v",3,{"cx*","cx*","i"}}, /* void __builtin_memcpy_x2x (xdata char *,xdata char *,int) */
567 { "__builtin_memcpy_c2x","v",3,{"cx*","cp*","i"}}, /* void __builtin_memcpy_c2x (xdata char *,code char *,int) */
568 { "__builtin_memset_x","v",3,{"cx*","c","i"}}, /* void __builtin_memset (xdata char *,char,int) */
570 { "NatLib_LoadByte","c",1,{"c"}}, /* char Natlib_LoadByte (0 based parameter number) */
571 { "NatLib_LoadShort","s",1,{"c"}}, /* short Natlib_LoadShort (0 based parameter number) */
572 { "NatLib_LoadInt","l",1,{"c"}}, /* long Natlib_LoadLong (0 based parameter number) */
573 { "NatLib_LoadPointer","cx*",1,{"c"}}, /* long Natlib_LoadPointer (0 based parameter number) */
574 /* TINI StateBlock related */
575 { "NatLib_InstallImmutableStateBlock","c",2,{"vx*","us"}},/* char NatLib_InstallImmutableStateBlock(state block *,int handle) */
576 { "NatLib_InstallEphemeralStateBlock","c",2,{"vx*","us"}},/* char NatLib_InstallEphemeralStateBlock(state block *,int handle) */
577 { "NatLib_RemoveImmutableStateBlock","v",0,{NULL}},/* void NatLib_RemoveImmutableStateBlock() */
578 { "NatLib_RemoveEphemeralStateBlock","v",0,{NULL}},/* void NatLib_RemoveEphemeralStateBlock() */
579 { "NatLib_GetImmutableStateBlock","i",0,{NULL}}, /* int NatLib_GetImmutableStateBlock () */
580 { "NatLib_GetEphemeralStateBlock","i",0,{NULL}}, /* int NatLib_GetEphemeralStateBlock () */
582 { "MM_XMalloc","i",1,{"l"}}, /* int MM_XMalloc (long) */
583 { "MM_Malloc","i",1,{"i"}}, /* int MM_Malloc (int) */
584 { "MM_ApplicationMalloc","i",1,{"i"}}, /* int MM_ApplicationMalloc (int) */
585 { "MM_Free","i",1,{"i"}}, /* int MM_Free (int) */
586 { "MM_Deref","cx*",1,{"i"}}, /* char *MM_Free (int) */
587 { "MM_UnrestrictedPersist","c",1,{"i"}}, /* char MM_UnrestrictedPersist (int) */
588 /* System functions */
589 { "System_ExecJavaProcess","c",2,{"cx*","i"}}, /* char System_ExecJavaProcess (char *,int) */
590 { "System_GetRTCRegisters","v",1,{"cx*"}}, /* void System_GetRTCRegisters (char *) */
591 { "System_SetRTCRegisters","v",1,{"cx*"}}, /* void System_SetRTCRegisters (char *) */
592 { "System_ThreadSleep","v",2,{"l","c"}}, /* void System_ThreadSleep (long,char) */
593 { "System_ThreadSleep_ExitCriticalSection","v",2,{"l","c"}},/* void System_ThreadSleep_ExitCriticalSection (long,char) */
594 { "System_ProcessSleep","v",2,{"l","c"}}, /* void System_ProcessSleep (long,char) */
595 { "System_ProcessSleep_ExitCriticalSection","v",2,{"l","c"}},/* void System_ProcessSleep_ExitCriticalSection (long,char) */
596 { "System_ThreadResume","c",2,{"c","c"}}, /* char System_ThreadResume(char,char) */
597 { "System_SaveJavaThreadState","v",0,{NULL}}, /* void System_SaveJavaThreadState() */
598 { "System_RestoreJavaThreadState","v",0,{NULL}}, /* void System_RestoreJavaThreadState() */
599 { "System_ProcessYield","v",0,{NULL}}, /* void System_ProcessYield() */
600 { "System_ProcessSuspend","v",0,{NULL}}, /* void System_ProcessSuspend() */
601 { "System_ProcessResume","v",1,{"c"}}, /* void System_ProcessResume(char) */
602 { "System_RegisterPoll","c",1,{"vF*"}}, /* char System_RegisterPoll ((void *func pointer)()) */
603 { "System_RemovePoll","c",1,{"vF*"}}, /* char System_RemovePoll ((void *func pointer)()) */
604 { "System_GetCurrentProcessId","c",0,{NULL}}, /* char System_GetCurrentProcessId() */
605 { "System_GetCurrentThreadId","c",0,{NULL}}, /* char System_GetCurrentThreadId() */
606 { NULL , NULL,0, {NULL}} /* mark end of table */
609 static const char *_a390Cmd[] =
611 "macro", "$l", "$3", "$1.a51", NULL
613 PORT tininative_port =
617 "DS80C390", /* Target name */
618 NULL, /* processor */
620 FALSE, /* Emit glue around main */
627 "-l", /* Options with debug */
628 "-l", /* Options without debug */
631 _tininative_do_assemble
643 /* Sizes: char, short, int, long, ptr, fptr, gptr, bit, float, max */
644 1, 2, 2, 4, 1, 3, 3, 1, 4, 4
668 /* ds390 has an 16 bit mul & div */
676 _tininative_finaliseOptions,
677 _tininative_setDefaultOptions,
678 ds390_assignRegisters,
680 _tininative_keywords,
681 _tininative_genAssemblerPreamble,
682 _tininative_genAssemblerEnd,
685 _ds390_reset_regparm,
693 1, /* transform <= to ! > */
694 1, /* transform >= to ! < */
695 1, /* transform != to !(a == b) */
697 TRUE, /* we support array initializers. */
699 __tininative_builtins, /* table of builtin functions */
700 FPOINTER, /* treat unqualified pointers as far pointers */
701 0, /* DONOT reset labelKey */
702 0, /* globals & local static NOT allowed */