3 This is a request for quote on raw boards and partial turnkey assembly of
4 TeleFire 1.0 and TeleLCO 1.0. We're planning on running this pair of
5 products through 'kickstarter', which means we would set a minimum order
6 size, but the order could end up larger than that. I think we'll need to
7 have quotes for 10, 25, 50 of each board to help set the pricing in
10 Kim, like some of our other products, this one has a notch in one side
11 to allow a micro USB connector to overhang the board edge. As a
12 result, these need to be tab-routed. We have no discussed optimal
13 panelization for a board of this geometry before, so please let me
14 know what a good arrangement would be if we want to build these in
15 lots of 10 ish. My latest FreeDFM run resulted in quotes 3956156 for
16 TeleLCO and 3956159 for TeleFire. We'll want to run these in standard
17 spec with the cheapest option which I think is 5 days.
19 Laura, the new BOM is attached, and the XYRS data is in the
20 telefire.xy and telelco.xy files in the zips. As usual will provide
21 some hard to find parts and want you to turnkey the rest. We're quite
22 cost sensitive for these, so whatever the cheapest assembly turn
25 From the standard data request for assembly quotes:
27 Company Name: Altus Metrum, LLC
29 Contact Name: Keith Packard
33 Part Number: TeleFire and TeleLCO
37 How many to assemble: 10, 25 or 50
39 PCB dimensions: TeleFire is 4.00 x 4.00.
40 TeleLCO is 4.50 x 3.75
42 How parts acquired: partial turnkey
44 I will provide J3 for TeleFire and
48 all SMT is on one side, and
49 all TH parts are no-loads
59 Please let me know if I've forgotten anything, and thanks in advance for