git.gag.com Git - hw/altusmetrum/blob - pcb.mk

   1 AM=../altusmetrum
   2 SCHEME=$(AM)/scheme
   3
   4 .SUFFIXES: .sch .pcb .ps .pdf
   5
   6 # need to have PROJECT defined
   7 ifndef PROJECT
   8         PROJECT=undefined
   9 endif
  10
  11 # if SCHEMATICS not defined, default to one sheet with project name
  12 ifndef SCHEMATICS
  13         SCHEMATICS=$(PROJECT).sch
  14 endif
  15
  16 CONFIG=gafrc attribs project
  17
  18 all:    drc partslist partslist.csv pcb
  19
  20 drc:    $(PROJECT).drc
  21
  22 $(PROJECT).drc: $(PROJECT).sch Makefile $(CONFIG)
  23         -gnetlist -g drc2 $(PROJECT).sch -o $@
  24
  25 partslist:      $(PROJECT).sch Makefile $(AM)/preferred-parts $(CONFIG)
  26         gnetlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
  27         head -n1 $(PROJECT).unsorted > partslist
  28         tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
  29         rm -f $(PROJECT).unsorted
  30
  31 partslist.csv:  $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  32         gnetlist -L $(SCHEME) -g partslistgag -o $(PROJECT).csvtmp $(SCHEMATICS)
  33         (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | awk -f $(AM)/bin/fillpartscsv ) > $@ && rm -f $(PROJECT).csvtmp
  34
  35 partslist.dk: partslist.csv
  36         $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
  37
  38 partslist-check.dk: partslist.csv
  39         $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
  40
  41 partslist-mouser.csv: partslist.csv
  42         $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
  43
  44 partslist.other: partslist.csv
  45         $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
  46
  47 $(PROJECT)-seeed.csv: partslist.csv
  48         $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
  49
  50 pcb:    $(SCHEMATICS) Makefile $(CONFIG)
  51         gsch2pcb project
  52
  53 $(PROJECT).xy:  $(PROJECT).pcb $(CONFIG)
  54         pcb -x bom $(PROJECT).pcb
  55
  56 $(PROJECT).bottom.gbr:  $(PROJECT).pcb $(CONFIG)
  57         pcb -x gerber $(PROJECT).pcb
  58         @case "$(SILK)" in \
  59         none)   rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
  60                 ;; \
  61         top)    rm -f $(PROJECT).bottomsilk.gbr; \
  62                 ;; \
  63         bottom) rm -f $(PROJECT).topsilk.gbr; \
  64                 ;; \
  65         both) \
  66                 ;; \
  67         *)      echo "Invalid silk $(SILK)"; exit 1; \
  68                 ;; \
  69         esac
  70
  71 zip: $(PROJECT).zip
  72
  73 $(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
  74         zip $(PROJECT).zip $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
  75
  76 oshpark: $(PROJECT)-oshpark.zip
  77
  78 $(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr
  79         cp $(PROJECT).bottom.gbr bottom\ layer.ger
  80         cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
  81         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
  82                 cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
  83         fi
  84         if [ -f $(PROJECT).topsilk.gbr ]; then \
  85                 cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
  86         fi
  87         cp $(PROJECT).outline.gbr board\ outline.ger
  88         cp $(PROJECT).top.gbr top\ layer.ger
  89         cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
  90         cp $(PROJECT).plated-drill.cnc drills.xln
  91         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
  92                 cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
  93                 cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
  94         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
  95                 cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
  96                 cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
  97         fi
  98         zip $(PROJECT)-oshpark.zip *.ger *.xln
  99
 100 seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 101
 102 $(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr
 103         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 104         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 105         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 106                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 107         fi
 108         if [ -f $(PROJECT).topsilk.gbr ]; then \
 109                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 110         fi
 111         cp $(PROJECT).outline.gbr $(PROJECT).gml
 112         cp $(PROJECT).top.gbr $(PROJECT).gtl
 113         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 114         cp $(PROJECT).plated-drill.cnc $(PROJECT).txt
 115         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 116                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 117                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 118         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 119                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 120                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 121         fi
 122         zip $(PROJECT)-seeed.zip $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo \
 123                 $(PROJECT).gto $(PROJECT).gml $(PROJECT).gtl $(PROJECT).txt \
 124                 $(PROJECT).gl2 $(PROJECT).gl3
 125
 126 stencil:        $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 127         zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 128
 129 clean:
 130         rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip
 131         rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln
 132         rm -f *.partslist *.new.pcb *.unsorted $(PROJECT).xls muffin-5267.pdf
 133         rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
 134         rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gto $(PROJECT).gml
 135         rm -f $(PROJECT).gtl $(PROJECT).gts $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
 136         rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 137         rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
 138
 139 muffins: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
 140         glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels \
 141                 -i partslist.csv -o muffin-5267.ps >/dev/null && \
 142                 ps2pdf muffin-5267.ps && rm muffin-5267.ps
 143
 144 .sch.ps:
 145         gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
 146
 147 .ps.pdf:
 148         ps2pdf $*.ps
 149
 150 SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
 151 SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
 152
 153 $(PROJECT)-sch.pdf:     $(SCHEMATICS_PDF)
 154         pdfjoin -o $@ $(SCHEMATICS_PDF)
 155
 156 $(PROJECT)-pcb.ps:      $(PROJECT).pcb $(CONFIG)
 157         pcb -x ps --psfile $@ --media Letter --ps-color $(PROJECT).pcb
 158
 159 $(PROJECT)-pcb.pdf:     $(PROJECT)-pcb.ps
 160         ps2pdf $(PROJECT)-pcb.ps
 161
 162 $(PROJECT)-big.ps:      $(PROJECT).pcb $(CONFIG)
 163         pcb -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).pcb
 164
 165 $(PROJECT)-big.pdf:     $(PROJECT)-big.ps
 166         ps2pdf $(PROJECT)-big.ps
 167
 168 pdf:    $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
 169
 170 project:
 171         (echo 'schematics $(SCHEMATICS)'; \
 172          echo 'output-name $(PROJECT)'; \
 173          echo 'elements-dir $(AM)/packages'; \
 174          echo 'skip-m4') > $@
 175
 176 attribs: $(AM)/attribs
 177         cp $(AM)/attribs $@
 178
 179 gafrc:
 180         (echo '; empty the library path and populate it with only our own symbols'; \
 181          echo '(reset-component-library)'; \
 182          echo '(load "../altusmetrum/gafrc")') > $@