git.gag.com Git - hw/altusmetrum/blob - pcb.mk

   1 AM=../altusmetrum
   2 SCHEME=$(AM)/scheme
   3
   4 .SUFFIXES: .sch .pcb .ps .pdf
   5
   6 # need to have PROJECT defined
   7 ifndef PROJECT
   8         PROJECT=undefined
   9 endif
  10
  11 # if SCHEMATICS not defined, default to one sheet with project name
  12 ifndef SCHEMATICS
  13         SCHEMATICS=$(PROJECT).sch
  14 endif
  15
  16 CONFIG=gafrc attribs project
  17
  18 all:    drc partslist partslist.csv pcb
  19
  20 drc:    $(PROJECT).drc
  21
  22 $(PROJECT).drc: $(PROJECT).sch Makefile $(CONFIG)
  23         -gnetlist -g drc2 $(PROJECT).sch -o $@
  24
  25 partslists: partslist partslist.csv partslist.dk partslist-check.dk partslist-mouser.csv partslist.other
  26
  27 partslist:      $(PROJECT).sch Makefile $(AM)/preferred-parts $(CONFIG)
  28         gnetlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
  29         head -n1 $(PROJECT).unsorted > partslist
  30         tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
  31         rm -f $(PROJECT).unsorted
  32
  33 partslist.csv:  $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
  34         gnetlist -L $(SCHEME) -g partslistgag -o $(PROJECT).csvtmp $(SCHEMATICS)
  35         (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
  36
  37 partslist.dk: partslist.csv
  38         $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
  39
  40 partslist-check.dk: partslist.csv
  41         $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
  42
  43 partslist-mouser.csv: partslist.csv
  44         $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
  45
  46 partslist.other: partslist.csv
  47         $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
  48
  49 $(PROJECT)-seeed.csv: partslist.csv
  50         $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
  51
  52 pcb:    $(SCHEMATICS) Makefile $(CONFIG)
  53         gsch2pcb project
  54
  55 $(PROJECT).xy:  $(PROJECT).pcb $(CONFIG)
  56         pcb -x bom $(PROJECT).pcb
  57
  58 $(PROJECT).bottom.gbr:  $(PROJECT).pcb $(CONFIG)
  59         pcb -x gerber $(PROJECT).pcb
  60         @case "$(SILK)" in \
  61         none)   rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
  62                 ;; \
  63         top)    rm -f $(PROJECT).bottomsilk.gbr; \
  64                 ;; \
  65         bottom) rm -f $(PROJECT).topsilk.gbr; \
  66                 ;; \
  67         both) \
  68                 ;; \
  69         *)      echo "Invalid silk $(SILK)"; exit 1; \
  70                 ;; \
  71         esac
  72
  73 $(PROJECT).all-drill.cnc: $(PROJECT).bottom.gbr
  74         gerbv -x drill -o $(PROJECT).all-drill.cnc $(PROJECT).plated-drill.cnc $(PROJECT).unplated-drill.cnc
  75
  76 zip: $(PROJECT).zip
  77
  78 $(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
  79         zip $(PROJECT).zip $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
  80
  81 oshpark: $(PROJECT)-oshpark.zip
  82
  83 $(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc
  84         cp $(PROJECT).bottom.gbr bottom\ layer.ger
  85         cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
  86         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
  87                 cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
  88         fi
  89         if [ -f $(PROJECT).topsilk.gbr ]; then \
  90                 cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
  91         fi
  92         cp $(PROJECT).outline.gbr board\ outline.ger
  93         cp $(PROJECT).top.gbr top\ layer.ger
  94         cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
  95         cp $(PROJECT).all-drill.cnc drills.xln
  96         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
  97                 cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
  98                 cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
  99         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 100                 cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
 101                 cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
 102         fi
 103         zip $(PROJECT)-oshpark.zip *.ger *.xln
 104
 105 seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 106
 107 $(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf
 108         cp $(PROJECT).bottom.gbr $(PROJECT).gbl
 109         cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
 110         if [ -f $(PROJECT).bottomsilk.gbr ]; then \
 111                 cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
 112         fi
 113         if [ -f $(PROJECT).bottompaste.gbr ]; then \
 114                 cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
 115         fi
 116         if [ -f $(PROJECT).topsilk.gbr ]; then \
 117                 cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
 118         fi
 119         if [ -f $(PROJECT).toppaste.gbr ]; then \
 120                 cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
 121         fi
 122         cp $(PROJECT).outline.gbr $(PROJECT).gml
 123         cp $(PROJECT).top.gbr $(PROJECT).gtl
 124         cp $(PROJECT).topmask.gbr $(PROJECT).gts
 125         cp $(PROJECT).all-drill.cnc $(PROJECT).txt
 126         if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
 127                 cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
 128                 cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
 129         elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
 130                 cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
 131                 cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
 132         fi
 133         zip $(PROJECT)-seeed.zip \
 134                 $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
 135                 $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
 136                 $(PROJECT).gml $(PROJECT).txt \
 137                 $(PROJECT).gl2 $(PROJECT).gl3 \
 138                 $(PROJECT).xy $(PROJECT)-sch.pdf
 139
 140 stencil:        $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 141         zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 142
 143 clean:
 144         rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip
 145         rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln
 146         rm -f *.partslist *.new.pcb *.unsorted $(PROJECT).xls muffin-5267.pdf
 147         rm -f partslist-check.dk partslist.dk partslist-mouser.csv partslist.other
 148         rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
 149         rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp
 150         rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
 151         rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
 152         rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
 153         rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
 154
 155 muffins: muffin-5267.pdf muffin-keithp.pdf
 156
 157 muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
 158         glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
 159
 160 muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
 161         glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
 162
 163 .sch.ps:
 164         gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
 165
 166 .ps.pdf:
 167         ps2pdf $*.ps
 168
 169 SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
 170 SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
 171
 172 $(PROJECT)-sch.pdf:     $(SCHEMATICS_PDF)
 173         pdfjoin -o $@ $(SCHEMATICS_PDF)
 174
 175 $(PROJECT)-pcb.ps:      $(PROJECT).pcb $(CONFIG)
 176         pcb -x ps --psfile $@ --media Letter --ps-color $(PROJECT).pcb
 177
 178 $(PROJECT)-pcb.pdf:     $(PROJECT)-pcb.ps
 179         ps2pdf $(PROJECT)-pcb.ps
 180
 181 $(PROJECT)-big.ps:      $(PROJECT).pcb $(CONFIG)
 182         pcb -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).pcb
 183
 184 $(PROJECT)-big.pdf:     $(PROJECT)-big.ps
 185         ps2pdf $(PROJECT)-big.ps
 186
 187 pdf:    $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
 188
 189 project:
 190         (echo 'schematics $(SCHEMATICS)'; \
 191          echo 'output-name $(PROJECT)'; \
 192          echo 'elements-dir $(AM)/packages'; \
 193          echo 'skip-m4') > $@
 194
 195 attribs: $(AM)/attribs
 196         cp $(AM)/attribs $@
 197
 198 gafrc:
 199         (echo '; empty the library path and populate it with only our own symbols'; \
 200          echo '(reset-component-library)'; \
 201          echo '(load "../altusmetrum/gafrc")') > $@
 202
 203 .gitignore: $(AM)/gitignore.in
 204         sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore