1 Element["" "Transistor" "" "TO39" 18800 18800 6000 7000 0 100 ""]
3 # The JEDEC drawing shows a pin diameter of 16-21 mils
8 # TO39: | 3 1 | <-- bottom view (supposed to be a circle)
12 # NOTE: some vendors, ST for example, number the pins
13 # differently. Here we follow the JEDEC drawing.
15 # the pins are arranged along a 200 mil diameter
16 # circle. The can outline is 315 to 335 mils (320 nom)
17 # for the top of the can and 350 to 370 mils (360 nom)
18 # for the bottom edge of thecan
20 Pin[0 -10000 5500 3000 6100 3500 "1" "1" "square"]
21 Pin[-10000 0 5500 3000 6100 3500 "2" "2" ""]
22 Pin[0 10000 5500 3000 6100 3500 "3" "3" ""]
23 Pin[10000 0 5500 3000 6100 3500 "4" "4" ""]
24 # tab is 29 to 40 mils long, 28 to 34 wide
25 # and comes off at an angle of 45 deg clockwise from
26 # pin 1 when looking at the top of the board
27 ElementLine [12700 -13900 14800 -16000 1000]
28 ElementLine [13300 -13300 15400 -15400 1000]
29 ElementLine [13900 -12700 16000 -14800 1000]
30 ElementLine [16000 -14800 14800 -16000 1000]
31 # x, y, width, height, start angle, delta angle, thickness
32 ElementArc [0 0 18300 18300 0 360 1000]