1 # grab the input values and convert to 1/100 mil
2 # how much to grow the pads by for soldermask [1/100 mil]
3 # clearance from planes [1/100 mil]
4 # silk screen width [1/100 mil]
5 # courtyard silk screen width [1/100 mil]
6 # element_flags, description, pcb-name, value, mark_x, mark_y,
7 # text_x, text_y, text_direction, text_scale, text_flags
8 Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0805" 0 0 -3150 -3150 0 100 ""]
11 # Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
14 5118 2000 5718 "1" "1" "square"]
17 5118 2000 5718 "2" "2" "square"]
18 ElementLine[-393 -2755 393 -2755 800]
19 ElementLine[-393 2755 393 2755 800]
21 # This draws a 1 mil placement courtyard outline in silk. It should probably
22 # not be included since you wont want to try and fab a 1 mil silk line. Then
23 # again, it is most useful during parts placement. It really is time for some
24 # additional non-fab layers...
25 # ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval( V2/2) CYW]
26 # ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval( V1/2) eval(-1*V2/2) CYW]
27 # ElementLine[eval( V1/2) eval( V2/2) eval( V1/2) eval(-1*V2/2) CYW]
28 # ElementLine[eval( V1/2) eval( V2/2) eval(-1*V1/2) eval( V2/2) CYW]