6 # grab the input values and convert to 1/100 mil
7 # how much to grow the pads by for soldermask [1/100 mil]
8 # clearance from planes [1/100 mil]
9 # silk screen width [1/100 mil]
10 # courtyard silk screen width [1/100 mil]
11 # element_flags, description, pcb-name, value, mark_x, mark_y,
12 # text_x, text_y, text_direction, text_scale, text_flags
13 Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0603" 0 0 -3150 -3150 0 100 ""]
15 Attribute("openscad" "0603")
17 # Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
20 2952 2000 3552 "1" "1" "square"]
23 2952 2000 3552 "2" "2" "square"]
25 # This draws a 1 mil placement courtyard outline in silk. It should probably
26 # not be included since you wont want to try and fab a 1 mil silk line. Then
27 # again, it is most useful during parts placement. It really is time for some
28 # additional non-fab layers...
29 # ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval( V2/2) CYW]
30 # ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval( V1/2) eval(-1*V2/2) CYW]
31 # ElementLine[eval( V1/2) eval( V2/2) eval( V1/2) eval(-1*V2/2) CYW]
32 # ElementLine[eval( V1/2) eval( V2/2) eval(-1*V1/2) eval( V2/2) CYW]