3 # English base translation file
5 # Should you need to add new logical keys here is the proposed method
7 # className.ComponantType.componantName
12 ! Set to the name of the current translation file (used for debugging purposes)
13 debug.currentFile = messages.properties
16 RocketActions.checkbox.Donotaskmeagain = Do not ask me again
17 RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
18 RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
19 RocketActions.showConfirmDialog.lbl2 = <html><i>This operation cannot be undone.</i>
20 RocketActions.showConfirmDialog.title = Delete simulations
21 RocketActions.DelCompAct.Delete = Delete
22 RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
23 RocketActions.DelSimuAct.Delete = Delete
24 RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
25 RocketActions.DelAct.Delete = Delete
26 RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
27 RocketActions.CutAction.Cut = Cut
28 RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
29 RocketActions.CopyAct.Copy = Copy
30 RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
31 RocketActions.PasteAct.Paste = Paste
32 RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
33 RocketActions.EditAct.Edit = Edit
34 RocketActions.EditAct.ttip.Edit = Edit the selected component.
35 RocketActions.NewStageAct.Newstage = New stage
36 RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
37 RocketActions.ActBoosterstage = Booster stage
38 RocketActions.MoveUpAct.Moveup = Move up
39 RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
40 RocketActions.MoveDownAct.Movedown = Move down
41 RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
44 RocketPanel.FigTypeAct.Sideview = Side view
45 RocketPanel.FigTypeAct.ttip.Sideview = Side view
46 RocketPanel.FigTypeAct.Backview = Back view
47 RocketPanel.FigTypeAct.ttip.Backview = Rear view
48 RocketPanel.lbl.Motorcfg = Motor configuration:
49 RocketPanel.lbl.infoMessage = <html>Click to select Shift+click to select other Double-click to edit Click+drag to move
53 BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
54 BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
55 BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
56 BasicFrame.tab.Rocketdesign = Rocket design
57 BasicFrame.tab.Flightsim = Flight simulations
58 BasicFrame.title.Addnewcomp = Add new component
59 BasicFrame.item.Openrocketdesign = Open a rocket design
60 BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
61 BasicFrame.item.SavecurRocketdesign = Save the current rocket design
62 BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
63 BasicFrame.item.Printpart = Print parts list and fin template
64 BasicFrame.item.Closedesign = Close the current rocket design
65 BasicFrame.item.Quitprogram = Quit the program
66 BasicFrame.menu.Rocketedt = Rocket editing
67 BasicFrame.dlg.lbl1 = Design '
68 BasicFrame.dlg.lbl2 = ' has not been saved.
69 BasicFrame.dlg.lbl3 = Do you want to save it?
70 BasicFrame.dlg.title = Design not saved
71 BasicFrame.StageName.Sustainer = Sustainer
72 BasicFrame.WarningDialog.txt1 = The following problems were encountered while opening
73 BasicFrame.WarningDialog.txt2 = Some design features may not have been loaded correctly.
74 BasicFrame.WarningDialog.title = Warnings while opening file
76 ! Labels used in buttons of dialog windows
78 button.cancel = Cancel
81 ! Common labels used in buttons of dialog windows
83 dlg.but.cancel = Cancel
87 ! General file type names
88 filetypes.pdf = PDF files
92 AboutDialog.lbl.version = Version
93 ! The texts below provide additional credits for the translation maintainer
94 ! - In AboutDialog.lbl.translation replace "English" with the current language.
95 ! - AboutDialog.lbl.translator is the translator / group name (may be empty)
96 ! - AboutDialog.lbl.translatorWebsite is a URL to the translator / group (may be empty)
97 ! - AboutDialog.lbl.translatorIcon is the file name of an icon under pix/translators/ (may be empty)
98 AboutDialog.lbl.translation = English translation by:
99 AboutDialog.lbl.translator =
100 AboutDialog.lbl.translatorWebsite =
101 AboutDialog.lbl.translatorIcon =
105 PrintDialog.title = Print or export
106 PrintDialog.but.previewAndPrint = Preview & Print
107 PrintDialog.checkbox.showByStage = Show by stage
108 PrintDialog.lbl.selectElements = Select elements to include:
109 printdlg.but.saveaspdf = Save as PDF
110 printdlg.but.preview = Preview
111 printdlg.but.settings = Settings
112 PrintDialog.error.preview.title = Unable to open preview
113 PrintDialog.error.preview.desc1 = Unable to open PDF preview.
114 PrintDialog.error.preview.desc2 = Please use the "Save as PDF" option instead.
118 bugreport.dlg.title = Bug report
119 bugreport.dlg.but.Sendbugreport = Send bug report
120 bugreport.dlg.but.Sendbugreport.Ttip = Automatically send the bug report to the OpenRocket developers.
121 bugreport.dlg.successmsg1 = Bug report successfully sent.
122 bugreport.dlg.successmsg2 = Thank you for helping make OpenRocket better!
123 bugreport.dlg.successmsg3 = Bug report sent
124 bugreport.dlg.connectedInternet = <html>If connected to the Internet, you can simply click <em>Send bug report</em>.
125 bugreport.dlg.otherwise = Otherwise, send the text below to the address:
126 bugreport.lbl.Theinformation = The information above may be included in a public bug report. Make sure it does not contain any sensitive information you do not want to be made public.
127 bugreport.dlg.failedmsg1 = OpenRocket was unable to send the bug report:
128 bugreport.dlg.failedmsg2 = Please send the report manually to
129 bugreport.dlg.failedmsg3 = Error sending report
130 bugreport.reportDialog.txt = <html><b>You can report a bug in OpenRocket by filling in and submitting the form below.</b><br>You can also report bugs and include attachments on the project web site.
131 bugreport.reportDialog.txt2 = <html><b>Please include a short description about what you were doing when the exception occurred.</b>
135 debuglogdlg.but.clear = Clear
136 debuglogdlg.OpenRocketdebuglog = OpenRocket debug log
137 debuglogdlg.Displayloglines = Display log lines:
138 debuglogdlg.Follow = Follow
139 debuglogdlg.col.Time = Time
140 debuglogdlg.col.Level = Level
141 debuglogdlg.col.Location = Location
142 debuglogdlg.col.Message = Message
143 debuglogdlg.lbl.Loglinenbr = Log line number:
144 debuglogdlg.lbl.Time = Time:
145 debuglogdlg.lbl.Level = Level:
148 ! Edit Motor configuration dialog
149 edtmotorconfdlg.but.removemotor = Remove motor
150 edtmotorconfdlg.but.Selectmotor = Select motor
151 edtmotorconfdlg.but.Removeconfiguration = Remove configuration
152 edtmotorconfdlg.but.Newconfiguration = New configuration
153 edtmotorconfdlg.lbl.Motormounts = <html><b>Motor mounts:</b>
154 edtmotorconfdlg.title.Editmotorconf = Edit motor configurations
155 edtmotorconfdlg.selectcomp = <html>Select which components function as motor mounts:
156 edtmotorconfdlg.lbl.Motorconfig = <html><b>Motor configurations:</b>
157 edtmotorconfdlg.lbl.Configname = Configuration name:
158 edtmotorconfdlg.lbl.Leavenamedefault = Leave name empty for default.
160 ! Example design dialog
161 exdesigndlg.but.open = Open
162 exdesigndlg.lbl.Selectexample = Select example designs to open:
163 exdesigndlg.lbl.Openexampledesign = Open example design
164 exdesigndlg.lbl.Exampledesignsnotfound = Example designs could not be found.
165 exdesigndlg.lbl.Examplesnotfound = Examples not found
168 ! Material edit panel
169 matedtpan.but.new = New
170 matedtpan.but.edit = Edit
171 matedtpan.but.delete = Delete
172 matedtpan.but.revertall = Revert all
173 matedtpan.col.Material = Material
174 matedtpan.col.Type = Type
175 matedtpan.col.Density = Density
176 matedtpan.col.but.ttip.New = Add a new material
177 matedtpan.title.Addcustmaterial = Add a custom material
178 matedtpan.but.ttip.edit = Edit an existing material
179 matedtpan.title.Editmaterial = Edit material
180 matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
181 matedtpan.but.ttip.delete = Delete a user-defined material
182 matedtpan.but.ttip.revertall = Delete all user-defined materials
183 matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
184 matedtpan.title.Revertall = Revert all?
185 matedtpan.lbl.edtmaterials = <html><i>Editing materials will not affect existing rocket designs.</i>
188 MaterialModel.title.Material = Material
189 MaterialModel.title.Defcustmat = Define custom material
193 pref.dlg.but.add = Add
194 pref.dlg.but.reset = Reset
195 pref.dlg.but.checknow = Check now
196 pref.dlg.but.defaultmetric = Default metric
197 pref.dlg.but.defaultimperial = Default imperial
198 pref.dlg.title.Preferences = Preferences
199 pref.dlg.tab.Units = Units
200 pref.dlg.tab.Defaultunits = Default units
201 pref.dlg.tab.Materials = Materials
202 pref.dlg.tab.Custommaterials = Custom materials
203 pref.dlg.tab.Options = Options
204 pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
205 pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
206 pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
207 pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
208 pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
209 pref.dlg.RASPfiles = RASP motor files (*.eng)
210 pref.dlg.RockSimfiles = RockSim engine files (*.rse)
211 pref.dlg.ZIParchives = ZIP archives (*.zip)
212 pref.dlg.checkbox.Checkupdates = Check for software updates at startup
213 pref.dlg.ttip.Checkupdatesnow = Check for software updates now
214 pref.dlg.lbl.Selectprefunits = Select your preferred units:
215 pref.dlg.lbl.Rocketdimensions = Rocket dimensions:
216 pref.dlg.lbl.Linedensity = Line density:
217 pref.dlg.lbl.Motordimensions = Motor dimensions:
218 pref.dlg.lbl.Surfacedensity = Surface density:
219 pref.dlg.lbl.Distance = Distance:
220 pref.dlg.lbl.Bulkdensity = Bulk density::
221 pref.dlg.lbl.Velocity = Velocity:
222 pref.dlg.lbl.Surfaceroughness = Surface roughness:
223 pref.dlg.lbl.Acceleration = Acceleration:
224 pref.dlg.lbl.Area = Area:
225 pref.dlg.lbl.Mass = Mass:
226 pref.dlg.lbl.Angle = Angle:
227 pref.dlg.lbl.Force = Force:
228 pref.dlg.lbl.Rollrate = Roll rate:
229 pref.dlg.lbl.Totalimpulse = Total impulse:
230 pref.dlg.lbl.Temperature = Temperature:
231 pref.dlg.lbl.Momentofinertia = Moment of inertia:
232 pref.dlg.lbl.Pressure = Pressure:
233 pref.dlg.lbl.Stability = Stability:
234 pref.dlg.lbl.effect1 = The effects will take place the next time you open a window.
235 pref.dlg.lbl.Checkingupdates = Checking for updates...
236 pref.dlg.lbl.msg1 = An error occurred while communicating with the server.
237 pref.dlg.lbl.msg2 = Unable to retrieve update information
238 pref.dlg.lbl.msg3 = You are running the latest version of OpenRocket.
239 pref.dlg.lbl.msg4 = No updates available
240 pref.dlg.PrefChoiseSelector1 = Always ask
241 pref.dlg.PrefChoiseSelector2 = Insert in middle
242 pref.dlg.PrefChoiseSelector3 = Add to end
243 pref.dlg.PrefBooleanSelector1 = Delete
244 pref.dlg.PrefBooleanSelector2 = Confirm
246 pref.dlg.DescriptionArea.Adddirectories = Add directories, RASP motor files (*.eng), RockSim engine files (*.rse) or ZIP archives separated by a semicolon (;) to load external thrust curves. Changes will take effect the next time you start OpenRocket.
249 ! Simulation edit dialog
250 simedtdlg.but.runsimulation = Run simulation
251 simedtdlg.but.resettodefault = Reset to default
252 simedtdlg.but.add = Add
253 simedtdlg.but.remove = Remove
254 simedtdlg.title.Editsim = Edit simulation
255 simedtdlg.lbl.Simname = Simulation name:
256 simedtdlg.tab.Launchcond = Launch conditions
257 simedtdlg.tab.Simopt = Simulation options
258 simedtdlg.tab.Plotdata = Plot data
259 simedtdlg.tab.Exportdata = Export data
260 simedtdlg.lbl.Motorcfg = Motor configuration:
261 simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
262 simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
263 simedtdlg.lbl.Wind = Wind
264 simedtdlg.lbl.Averwindspeed = Average windspeed:
265 simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
266 simedtdlg.lbl.Stddeviation = Standard deviation:
267 simedtdlg.lbl.ttip.Stddeviation = <html>The standard deviation of the windspeed.<br>The windspeed is within twice the standard deviation from the average for 95% of the time.
268 simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
269 simedtdlg.lbl.ttip.Turbulenceintensity1 = <html>The turbulence intensity is the standard deviation divided by the average windspeed.<br>
270 simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
271 simedtdlg.lbl.ttip.Turbulenceintensity3 = to
272 simedtdlg.border.Atmoscond = Atmospheric conditions
273 simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
274 simedtdlg.checkbox.ttip.InterStdAtmosphere1 = <html>Select to use the International Standard Atmosphere model.<br>This model has a temperature of
275 simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
276 simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
277 simedtdlg.lbl.Temperature = Temperature:
278 simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
279 simedtdlg.lbl.Pressure = Pressure:
280 simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
281 simedtdlg.lbl.Launchsite = Launch site
282 simedtdlg.lbl.Latitude = Latitude:
283 simedtdlg.lbl.ttip.Latitude = <html>The launch site latitude affects the gravitational pull of Earth.<br>Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
284 simedtdlg.lbl.Altitude = Altitude:
285 simedtdlg.lbl.ttip.Altitude = <html>The launch altitude above mean sea level.<br>This affects the position of the rocket in the atmospheric model.
286 simedtdlg.border.Launchrod = Launch rod
287 simedtdlg.lbl.Length = Length:
288 simedtdlg.lbl.ttip.Length = The length of the launch rod.
289 simedtdlg.lbl.Angle = Angle:
290 simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
291 simedtdlg.lbl.Direction = Direction:
292 simedtdlg.lbl.ttip.Direction1 = <html>Direction of the launch rod relative to the wind.<br>
293 simedtdlg.lbl.ttip.Direction2 = = towards the wind,
294 simedtdlg.lbl.ttip.Direction3 = = downwind.
295 simedtdlg.border.Simopt = Simulator options
296 simedtdlg.lbl.Calcmethod = Calculation method:
297 simedtdlg.lbl.ttip.Calcmethod = <html>The Extended Barrowman method calculates aerodynamic forces according <br>to the Barrowman equations extended to accommodate more components.
298 simedtdlg.lbl.ExtBarrowman = Extended Barrowman
299 simedtdlg.lbl.Simmethod = Simulation method:
300 simedtdlg.lbl.ttip.Simmethod1 = <html>The six degree-of-freedom simulator allows the rocket total freedom during flight.<br>
301 simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4<sup>th</sup> order Runge-Kutta 4 numerical integration.
302 simedtdlg.lbl.Timestep = Time step:
303 simedtdlg.lbl.ttip.Timestep1 = <html>The time between simulation steps.<br>A smaller time step results in a more accurate but slower simulation.<br>
304 simedtdlg.lbl.ttip.Timestep2 = The 4<sup>th</sup> order simulation method is quite accurate with a time step of
305 simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
306 simedtdlg.border.Simlist = Simulator listeners
307 simedtdlg.txt.longA1 = <html><i>Simulation listeners</i> is an advanced feature that allows user-written code to listen to and interact with the simulation.
308 simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
309 simedtdlg.lbl.Curlist = Current listeners:
310 simedtdlg.lbl.Addsimlist = Add simulation listener
311 simedtdlg.lbl.Noflightdata = No flight data available.
312 simedtdlg.lbl.runsimfirst = Please run the simulation first.
313 simedtdlg.chart.Simflight = Simulated flight
314 simedtdlg.dlg.Simres = Simulation results
315 simedtdlg.IntensityDesc.None = None
316 simedtdlg.IntensityDesc.Verylow = Very low
317 simedtdlg.IntensityDesc.Low = Low
318 simedtdlg.IntensityDesc.Medium = Medium
319 simedtdlg.IntensityDesc.High = High
320 simedtdlg.IntensityDesc.Veryhigh = Very high
321 simedtdlg.IntensityDesc.Extreme = Extreme
326 simpanel.but.newsimulation = New simulation
327 simpanel.but.editsimulation = Edit simulation
328 simpanel.but.runsimulations = Run simulations
329 simpanel.but.deletesimulations = Delete simulations
330 simpanel.but.plotexport = Plot / export
331 simpanel.but.ttip.newsimulation = Add a new simulation
332 simpanel.but.ttip.editsim = Edit the selected simulation
333 simpanel.but.ttip.runsimu = Re-run the selected simulations
334 simpanel.but.ttip.deletesim = Delete the selected simulations
335 simpanel.checkbox.donotask = Do not ask me again
336 simpanel.lbl.defpref = You can change the default operation in the preferences.
337 simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
338 simpanel.dlg.lbl.DeleteSim2 = <html><i>This operation cannot be undone.</i>
339 simpanel.dlg.lbl.DeleteSim3 = Delete simulations
340 simpanel.col.Name = Name
341 simpanel.col.Motors = Motors
342 simpanel.col.Apogee = Apogee
343 simpanel.col.Maxvelocity = Max. velocity
344 simpanel.col.Maxacceleration = Max. acceleration
345 simpanel.col.Timetoapogee = Time to apogee
346 simpanel.col.Flighttime = Flight time
347 simpanel.col.Groundhitvelocity = Ground hit velocity
349 ! SimulationRunDialog
350 SimuRunDlg.title.RunSim = Running simulations...
351 SimuRunDlg.lbl.Running = Running ...
352 SimuRunDlg.lbl.Simutime = Simulation time:
353 SimuRunDlg.lbl.Altitude = Altitude:
354 SimuRunDlg.lbl.Velocity = Velocity:
355 SimuRunDlg.msg.Unabletosim = Unable to simulate:
356 SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
357 SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
358 SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
359 SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
360 SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
361 SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
362 SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
366 ! SimulationExportPanel
367 SimExpPan.desc = Comma Separated Files (*.csv)
368 SimExpPan.border.Vartoexport = Variables to export
369 SimExpPan.but.Selectall = Select all
370 SimExpPan.but.Selectnone = Select none
371 SimExpPan.border.Fieldsep = Field separator
372 SimExpPan.lbl.Fieldsepstr = Field separator string:
373 SimExpPan.lbl.longA1 = <html>The string used to separate the fields in the exported file.<br>
374 SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
375 SimExpPan.checkbox.Includesimudesc = Include simulation description
376 SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
377 SimExpPan.border.Comments = Comments
378 SimExpPan.checkbox.Includefielddesc = Include field descriptions
379 SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
380 SimExpPan.checkbox.Incflightevents = Include flight events
381 SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
382 SimExpPan.lbl.Commentchar = Comment character:
383 SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
384 SimExpPan.but.Exporttofile = Export to file...
385 SimExpPan.Fileexists.desc1 = File \"
386 SimExpPan.Fileexists.desc2 = \" exists. Overwrite?
387 SimExpPan.Fileexists.title = File exists
388 SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of
389 SimExpPan.ExportingVar.desc2 = Exporting
390 SimExpPan.ExportingVar.desc3 = variables out of
391 SimExpPan.Col.Variable = Variable
392 SimExpPan.Col.Unit = Unit
395 MotorPlot.title.Motorplot = Motor plot
396 MotorPlot.but.Select = Select
397 MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
398 MotorPlot.Chart.Time = Time / s
399 MotorPlot.Chart.Thrust = Thrust / N
400 MotorPlot.txt.Designation = Designation:
401 MotorPlot.txt.Manufacturer = Manufacturer:
402 MotorPlot.txt.Type = Type:
403 MotorPlot.txt.Delays = Delays:
404 MotorPlot.txt.Comment = Comment:\n
408 ! Simulation plot panel
409 simplotpanel.lbl.Presetplotconf = Preset plot configurations:
410 simplotpanel.lbl.Xaxistype = X axis type:
411 simplotpanel.lbl.Unit = Unit:
412 simplotpanel.lbl.Yaxistypes = Y axis types:
413 simplotpanel.lbl.Flightevents = Flight events:
414 simplotpanel.but.All = All
415 simplotpanel.but.None = None
416 simplotpanel.but.NewYaxisplottype = New Y axis plot type
417 simplotpanel.but.Plotflight = Plot flight
418 simplotpanel.lbl.Axis = Axis:
419 simplotpanel.but.ttip.Removethisplot = Remove this plot
420 simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
421 simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
422 simplotpanel.OptionPane.lbl2 = Cannot add plot
423 simplotpanel.AUTO_NAME = Auto
424 simplotpanel.LEFT_NAME = Left
425 simplotpanel.RIGHT_NAME = Right
426 simplotpanel.CUSTOM = Custom
428 ! Component add buttons
429 compaddbuttons.Bodycompandfinsets = Body components and fin sets
430 compaddbuttons.Nosecone = Nose cone
431 compaddbuttons.Bodytube = Body tube
432 compaddbuttons.Transition = Transition
433 compaddbuttons.Trapezoidal = Trapezoidal
434 compaddbuttons.Elliptical = Elliptical
435 compaddbuttons.Freeform = Freeform
436 compaddbuttons.Launchlug = Launch lug
437 compaddbuttons.Innercomponent = Inner component
438 compaddbuttons.Innertube = Inner tube
439 compaddbuttons.Coupler = Coupler
440 compaddbuttons.Centeringring = Centering\nring
441 compaddbuttons.Bulkhead = Bulkhead
442 compaddbuttons.Engineblock = Engine\nblock
443 compaddbuttons.Massobjects = Mass objects
444 compaddbuttons.Parachute = Parachute
445 compaddbuttons.Streamer = Streamer
446 compaddbuttons.Shockcord = Shock cord
447 compaddbuttons.Masscomponent = Mass\ncomponent
448 compaddbuttons.Donotaskmeagain = Do not ask me again
449 compaddbuttons.Selectcomppos = Select component position
450 compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
451 compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
452 compaddbuttons.askPosition.Inserthere = Insert here
453 compaddbuttons.askPosition.Addtotheend = Add to the end
454 compaddbuttons.askPosition.Cancel = Cancel
456 ! Component Analysis Dialog
457 componentanalysisdlg.componentanalysis = Component analysis
458 componentanalysisdlg.lbl.winddir = Wind direction:
459 componentanalysisdlg.TitledBorder.warnings = Warnings:
460 componentanalysisdlg.ToggleBut.worst = Worst
461 componentanalysisdlg.lbl.angleofattack = Angle of attack:
462 componentanalysisdlg.lbl.machnumber = Mach number:
463 componentanalysisdlg.lbl.rollrate = Roll rate:
464 componentanalysisdlg.lbl.activestages = Active stages:
465 componentanalysisdlg.lbl.motorconf = Motor configuration:
466 componentanalysisdlg.TabStability.Col = Component
467 componentanalysisdlg.TabStability = Stability
468 componentanalysisdlg.TabStability.ttip = Stability information
469 componentanalysisdlg.dragTableModel.Col.Component = Component
470 componentanalysisdlg.dragTableModel.Col.Pressure = <html>Pressure C<sub>D</sub>
471 componentanalysisdlg.dragTableModel.Col.Base = <html>Base C<sub>D</sub>
472 componentanalysisdlg.dragTableModel.Col.friction = <html>Friction C<sub>D</sub>
473 componentanalysisdlg.dragTableModel.Col.total = <html>Total C<sub>D</sub>
474 componentanalysisdlg.dragTabchar = Drag characteristics
475 componentanalysisdlg.dragTabchar.ttip = Drag characteristics
476 componentanalysisdlg.rollTableModel.Col.component = Component
477 componentanalysisdlg.rollTableModel.Col.rollforc = Roll forcing coefficient
478 componentanalysisdlg.rollTableModel.Col.rolldamp = Roll damping coefficient
479 componentanalysisdlg.rollTableModel.Col.total = <html>Total C<sub>l</sub>
480 componentanalysisdlg.rollTableModel = Roll dynamics
481 componentanalysisdlg.rollTableModel.ttip = Roll dynamics
482 componentanalysisdlg.println.closingmethod = Closing method called:
483 componentanalysisdlg.println.settingnam = SETTING NAN VALUES
484 componentanalysisdlg.lbl.reflenght = Reference length:
485 componentanalysisdlg.lbl.refarea = Reference area:
486 !componentanalysisdlg.But.close =Close
488 ! Custom Material dialog
489 custmatdlg.title.Custommaterial = Custom material
490 custmatdlg.lbl.Materialname = Material name:
491 custmatdlg.lbl.Materialtype = Material type:
492 custmatdlg.lbl.Materialdensity = Material density:
493 custmatdlg.checkbox.Addmaterial = Add material to database
496 ! Ring Component Config
497 ringcompcfg.OuterRadius = OuterRadius
498 ringcompcfg.Automatic = Automatic
499 ringcompcfg.InnerRadius = InnerRadius
500 ringcompcfg.Thickness = Thickness
501 ringcompcfg.Length = Length
502 ringcompcfg.Positionrelativeto = Position relative to:
503 ringcompcfg.plus = plus
504 ringcompcfg.PositionValue = PositionValue
505 ringcompcfg.Radialdistance = Radial distance:
506 ringcompcfg.Distancefrom = Distance from the rocket centerline
507 ringcompcfg.Radialdirection = Radial direction
508 ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
509 ringcompcfg.but.Reset = Reset
510 ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
511 ringcompcfg.EngineBlock.desc = <html>An <b>engine block</b> stops the motor from moving forwards in the motor mount tube.<br><br>In order to add a motor, create a <b>body tube</b> or <b>inner tube</b> and mark it as a motor mount in the <em>Motor</em> tab.
512 ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube.
516 BodyTubecfg.lbl.Bodytubelength = Body tube length:
517 BodyTubecfg.lbl.Outerdiameter = Outer diameter:
518 BodyTubecfg.lbl.Innerdiameter = Inner diameter:
519 BodyTubecfg.lbl.Wallthickness = Wall thickness:
520 BodyTubecfg.tab.General = General
521 BodyTubecfg.tab.Generalproperties = General properties
522 BodyTubecfg.tab.Motor = Motor
523 BodyTubecfg.tab.Motormountconf = Motor mount configuration
524 BodyTubecfg.checkbox.Automatic = Automatic
525 BodyTubecfg.checkbox.Filled = Filled
528 FinSetConfig.tab.Fintabs = Fin tabs
529 FinSetConfig.tab.Through-the-wall = Through-the-wall fin tabs
530 FinSetConfig.but.Converttofreeform = Convert to freeform
531 FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
532 FinSetConfig.Convertfinset = Convert fin set
533 FinSetConfig.but.Splitfins = Split fins
534 FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
535 FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
536 FinSetConfig.lbl.Tablength = Tab length:
537 FinSetConfig.ttip.Tablength = The length of the fin tab.
538 FinSetConfig.lbl.Tabheight = Tab height:
539 FinSetConfig.ttip.Tabheight = The spanwise height of the fin tab.
540 FinSetConfig.lbl.Tabposition = Tab position:
541 FinSetConfig.ttip.Tabposition = The position of the fin tab.
542 FinSetConfig.lbl.relativeto = relative to
544 ! MotorDatabaseLoadingDialog
545 MotorDbLoadDlg.title = Loading motors
546 MotorDbLoadDlg.Loadingmotors = Loading motors...
549 RocketCfg.lbl.Designname = Design name:
550 RocketCfg.lbl.Designer = Designer:
551 RocketCfg.lbl.Comments = Comments:
552 RocketCfg.lbl.Revisionhistory = Revision history:
553 RocketCfg.lbl.Material = Material:
556 ShockCordCfg.lbl.Shockcordlength = Shock cord length
558 ! RocketComponentConfig
559 RocketCompCfg.lbl.Componentname = Component name:
560 RocketCompCfg.ttip.Thecomponentname = The component name.
561 RocketCompCfg.tab.Override = Override
562 RocketCompCfg.tab.MassandCGoverride = Mass and CG override options
563 RocketCompCfg.tab.Figure = Figure
564 RocketCompCfg.tab.Figstyleopt = Figure style options
565 RocketCompCfg.tab.Comment = Comment
566 RocketCompCfg.tab.Specifyacomment = Specify a comment for the component
567 RocketCompCfg.lbl.Mass = Mass:
568 RocketCompCfg.lbl.Componentmass = Component mass:
569 RocketCompCfg.lbl.overriddento = (overridden to
570 RocketCompCfg.lbl.overriddenby = (overridden by
571 RocketCompCfg.lbl.Componentmaterial = Component material:
572 RocketCompCfg.lbl.Componentfinish = Component finish:
573 RocketCompCfg.lbl.ttip.componentmaterialaffects = The component material affects the weight of the component.
574 RocketCompCfg.combo.ttip.componentmaterialaffects = The component material affects the weight of the component.
575 RocketCompCfg.lbl.longA1 = <html>The component finish affects the aerodynamic drag of the component.<br>
576 RocketCompCfg.lbl.longA2 = The value indicated is the average roughness height of the surface.
577 RocketCompCfg.but.Setforall = Set for all
578 RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
579 RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
580 RocketCompCfg.checkbox.Overridemass = Override mass:
581 RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
582 RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
583 RocketCompCfg.lbl.longB1 = <html>The overridden mass does not include motors.<br>
584 RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
585 RocketCompCfg.lbl.Commentsonthe = Comments on the
586 RocketCompCfg.lbl.Figurestyle = Figure style:
587 RocketCompCfg.lbl.Componentcolor = Component color:
588 RocketCompCfg.lbl.Choosecolor = Choose color
589 RocketCompCfg.checkbox.Usedefaultcolor = Use default color
590 RocketCompCfg.lbl.Complinestyle = Component line style:
591 RocketCompCfg.but.Saveasdefstyle = Save as default style
592 RocketCompCfg.lbl.Diameter = Diameter:
593 RocketCompCfg.lbl.Length = Length:
594 RocketCompCfg.lbl.Thickness = Thickness:
595 RocketCompCfg.checkbox.Endcapped = End capped
596 RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
597 RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
598 RocketCompCfg.title.Aftshoulder = Aft shoulder
599 RocketCompCfg.border.Foreshoulder = Fore shoulder
600 !RocketCompCfg.lbl.Length = Length:
603 BulkheadCfg.tab.Radius = Radius:
604 BulkheadCfg.tab.Thickness = Thickness:
605 BulkheadCfg.tab.General = General
606 BulkheadCfg.tab.Generalproperties = General properties
609 CenteringRingCfg.tab.Outerdiam = Outer diameter:
610 CenteringRingCfg.tab.Innerdiam = Inner diameter:
611 CenteringRingCfg.tab.Thickness = Thickness:
612 CenteringRingCfg.tab.General = General
613 CenteringRingCfg.tab.Generalproperties = General properties
615 !ComponentConfigDialog
616 ComponentCfgDlg.configuration = configuration
617 ComponentCfgDlg.Modify = Modify
619 !EllipticalFinSetConfig
620 EllipticalFinSetCfg.Nbroffins = Number of fins:
621 EllipticalFinSetCfg.Rotation = Rotation:
622 EllipticalFinSetCfg.Fincant = Fin cant:
623 EllipticalFinSetCfg.Rootchord = Root chord:
624 EllipticalFinSetCfg.Height = Height:
625 EllipticalFinSetCfg.Positionrelativeto = Position relative to:
626 EllipticalFinSetCfg.plus = plus
627 EllipticalFinSetCfg.FincrossSection = Fin cross section:
628 EllipticalFinSetCfg.Thickness = Thickness:
629 EllipticalFinSetCfg.General = General
630 EllipticalFinSetCfg.Generalproperties = General properties
631 EllipticalFinSetCfg.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
633 !FreeformFinSetConfig
634 FreeformFinSetCfg.tab.General = General
635 FreeformFinSetCfg.tab.ttip.General = General properties
636 FreeformFinSetCfg.tab.Shape = Shape
637 FreeformFinSetCfg.tab.ttip.Finshape = Fin shape
638 FreeformFinSetCfg.lbl.Numberoffins = Number of fins:
639 FreeformFinSetCfg.lbl.Finrotation = Fin rotation:
640 FreeformFinSetCfg.lbl.Fincant = Fin cant:
641 FreeformFinSetCfg.lbl.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
642 FreeformFinSetCfg.lbl.Posrelativeto = Position relative to:
643 FreeformFinSetCfg.lbl.plus = plus
644 FreeformFinSetCfg.lbl.FincrossSection = Fin cross section:
645 FreeformFinSetCfg.lbl.Thickness = Thickness:
648 InnerTubeCfg.tab.Motor = Motor
649 InnerTubeCfg.tab.ttip.Motor = Motor mount configuration
650 InnerTubeCfg.tab.Cluster = Cluster
651 InnerTubeCfg.tab.ttip.Cluster = Cluster configuration
652 InnerTubeCfg.tab.Radialpos = Radial position
653 InnerTubeCfg.tab.ttip.Radialpos = Radial position
654 InnerTubeCfg.lbl.Selectclustercfg = Select cluster configuration:
655 InnerTubeCfg.lbl.TubeSep = Tube separation:
656 InnerTubeCfg.lbl.ttip.TubeSep = The separation of the tubes, 1.0 = touching each other
657 InnerTubeCfg.lbl.Rotation = Rotation:
658 InnerTubeCfg.lbl.ttip.Rotation = Rotation angle of the cluster configuration
659 InnerTubeCfg.lbl.Rotangle = Rotation angle of the cluster configuration
660 InnerTubeCfg.but.Splitcluster = Split cluster
661 InnerTubeCfg.lbl.longA1 = <html>Split the cluster into separate components.<br>
662 InnerTubeCfg.lbl.longA2 = This also duplicates all components attached to this inner tube.
663 InnerTubeCfg.but.Resetsettings = Reset settings
664 InnerTubeCfg.but.ttip.Resetsettings = Reset the separation and rotation to the default values
667 LaunchLugCfg.lbl.Length = Length:
668 LaunchLugCfg.lbl.Outerdiam = Outer diameter:
669 LaunchLugCfg.lbl.Innerdiam = Inner diameter:
670 LaunchLugCfg.lbl.Thickness = Thickness:
671 LaunchLugCfg.lbl.Radialpos = Radial position:
672 LaunchLugCfg.lbl.Posrelativeto = Position relative to:
673 LaunchLugCfg.lbl.plus = plus
674 LaunchLugCfg.tab.General = General
675 LaunchLugCfg.tab.Generalprop = General properties
677 ! MassComponentConfig
678 MassComponentCfg.lbl.Mass = Mass
679 MassComponentCfg.lbl.Length = Length
680 MassComponentCfg.lbl.Diameter = Diameter
681 MassComponentCfg.lbl.PosRelativeto = Position relative to:
682 MassComponentCfg.lbl.plus = plus
683 MassComponentCfg.tab.General = General
684 MassComponentCfg.tab.ttip.General = General properties
685 MassComponentCfg.tab.Radialpos = Radial position
686 MassComponentCfg.tab.ttip.Radialpos = Radial position configuration
687 MassComponentCfg.lbl.Radialdistance = Radial distance:
688 MassComponentCfg.lbl.Radialdirection = Radial direction:
689 MassComponentCfg.but.Reset = Reset
692 MotorCfg.checkbox.compmotormount = This component is a motor mount
693 MotorCfg.lbl.Motorcfg = Motor configuration:
694 MotorCfg.but.New = New
695 MotorCfg.lbl.Currentmotor = Current motor:
696 MotorCfg.lbl.Motoroverhang = Motor overhang:
697 MotorCfg.lbl.Ignitionat = Ignition at:
698 MotorCfg.lbl.plus = plus
699 MotorCfg.lbl.seconds = seconds
700 MotorCfg.lbl.longA1 = The current design has only one stage.
701 MotorCfg.lbl.longA2 = Stages can be added by clicking \"New stage\".
702 MotorCfg.lbl.longB1 = The current design has
703 MotorCfg.lbl.longB2 = stages.
704 MotorCfg.but.Selectmotor = Select motor
705 MotorCfg.but.Removemotor = Remove motor
706 MotorCfg.lbl.motorLabel = None
709 NoseConeCfg.lbl.Noseconeshape = Nose cone shape:
710 NoseConeCfg.lbl.Shapeparam = Shape parameter:
711 NoseConeCfg.lbl.Noseconelength = Nose cone length:
712 NoseConeCfg.lbl.Basediam = Base diameter:
713 NoseConeCfg.checkbox.Automatic = Automatic
714 NoseConeCfg.lbl.Wallthickness = Wall thickness:
715 NoseConeCfg.checkbox.Filled = Filled
716 NoseConeCfg.tab.General = General
717 NoseConeCfg.tab.ttip.General = General properties
718 NoseConeCfg.tab.Shoulder = Shoulder
719 NoseConeCfg.tab.ttip.Shoulder = Shoulder properties
722 ParachuteCfg.lbl.Canopy = Canopy:
723 ParachuteCfg.lbl.Diameter = Diameter:
724 ParachuteCfg.lbl.Material = Material:
725 ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
726 ParachuteCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
727 ParachuteCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the parachute.<br>
728 ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
729 ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
730 ParachuteCfg.but.Reset = Reset
731 ParachuteCfg.lbl.Shroudlines = Shroud lines:
732 ParachuteCfg.lbl.Numberoflines = Number of lines:
733 ParachuteCfg.lbl.Linelength = Line length:
734 ParachuteCfg.lbl.Material = Material:
735 ParachuteCfg.lbl.Posrelativeto = Position relative to:
736 ParachuteCfg.lbl.plus = plus
737 ParachuteCfg.lbl.Packedlength = Packed length:
738 ParachuteCfg.lbl.Packeddiam = Packed diameter:
739 ParachuteCfg.lbl.Deploysat = Deploys at:
740 ParachuteCfg.lbl.seconds = seconds
741 ParachuteCfg.lbl.Altitude = Altitude:
742 ParachuteCfg.tab.General = General
743 ParachuteCfg.tab.ttip.General = General properties
744 ParachuteCfg.tab.Radialpos = Radial position
745 ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
746 ParachuteCfg.lbl.Radialdistance = Radial distance:
747 ParachuteCfg.lbl.Radialdirection = Radial direction:
748 ParachuteCfg.but.Reset = Reset
751 ShockCordCfg.lbl.Shockcordlength = Shock cord length
752 ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
753 ShockCordCfg.lbl.Posrelativeto = Position relative to:
754 ShockCordCfg.lbl.plus = plus
755 ShockCordCfg.lbl.Packedlength = Packed length:
756 ShockCordCfg.lbl.Packeddiam = Packed diameter:
757 ShockCordCfg.tab.General = General
758 ShockCordCfg.tab.ttip.General = General properties
761 SleeveCfg.tab.Outerdiam = Outer diameter:
762 SleeveCfg.tab.Innerdiam = Inner diameter:
763 SleeveCfg.tab.Wallthickness = Wall thickness:
764 SleeveCfg.tab.Length = Length:
765 SleeveCfg.tab.General = General
766 SleeveCfg.tab.Generalproperties = General properties
769 StreamerCfg.lbl.Striplength = Strip length:
770 StreamerCfg.lbl.Stripwidth = Strip width:
771 StreamerCfg.lbl.Striparea = Strip area:
772 StreamerCfg.lbl.Aspectratio = Aspect ratio:
773 StreamerCfg.lbl.Material = Material:
774 StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight of the component.
775 StreamerCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
776 StreamerCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the streamer.<br>
777 StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
778 StreamerCfg.lbl.Automatic = Automatic
779 StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
780 StreamerCfg.lbl.Posrelativeto = Position relative to:
781 StreamerCfg.lbl.plus = plus
782 StreamerCfg.lbl.Packedlength = Packed length:
783 StreamerCfg.lbl.Packeddiam = Packed diameter:
784 StreamerCfg.lbl.Deploysat = Deploys at:
785 StreamerCfg.lbl.seconds = seconds
786 StreamerCfg.lbl.Altitude = Altitude:
787 StreamerCfg.tab.General = General
788 StreamerCfg.tab.ttip.General = General properties
789 StreamerCfg.tab.Radialpos = Radial position
790 StreamerCfg.tab.ttip.Radialpos = Radial position configuration
791 StreamerCfg.lbl.Radialdistance = Radial distance:
792 StreamerCfg.lbl.Radialdirection = Radial direction:
793 StreamerCfg.but.Reset = Reset
795 ! ThicknessRingComponentConfig
796 ThicknessRingCompCfg.tab.Outerdiam = Outer diameter:
797 ThicknessRingCompCfg.tab.Innerdiam = Inner diameter:
798 ThicknessRingCompCfg.tab.Wallthickness = Wall thickness:
799 ThicknessRingCompCfg.tab.Length = Length:
800 ThicknessRingCompCfg.tab.General = General
801 ThicknessRingCompCfg.tab.Generalprop = General properties
804 TransitionCfg.lbl.Transitionshape = Transition shape:
805 TransitionCfg.checkbox.Clipped = Clipped
806 TransitionCfg.lbl.Shapeparam = Shape parameter:
807 TransitionCfg.lbl.Transitionlength = Transition length:
808 TransitionCfg.lbl.Forediam = Fore diameter:
809 TransitionCfg.checkbox.Automatic = Automatic
810 TransitionCfg.lbl.Aftdiam = Aft diameter:
811 TransitionCfg.lbl.Wallthickness = Wall thickness:
812 TransitionCfg.checkbox.Filled = Filled
813 TransitionCfg.tab.General = General
814 TransitionCfg.tab.Generalproperties = General properties
815 TransitionCfg.tab.Shoulder = Shoulder
816 TransitionCfg.tab.Shoulderproperties = Shoulder properties
818 ! TrapezoidFinSetConfig
819 TrapezoidFinSetCfg.lbl.Nbroffins = Number of fins:
820 TrapezoidFinSetCfg.lbl.ttip.Nbroffins = The number of fins in the fin set.
821 TrapezoidFinSetCfg.lbl.Finrotation = Fin rotation:
822 TrapezoidFinSetCfg.lbl.ttip.Finrotation = The angle of the first fin in the fin set.
823 TrapezoidFinSetCfg.lbl.Fincant = Fin cant:
824 TrapezoidFinSetCfg.lbl.ttip.Fincant =The angle that the fins are canted with respect to the rocket body.
825 TrapezoidFinSetCfg.lbl.Rootchord = Root chord:
826 TrapezoidFinSetCfg.lbl.Tipchord = Tip chord:
827 TrapezoidFinSetCfg.lbl.Height = Height:
828 TrapezoidFinSetCfg.lbl.Sweeplength = Sweep length:
829 TrapezoidFinSetCfg.lbl.Sweepangle = Sweep angle:
830 TrapezoidFinSetCfg.lbl.FincrossSection = Fin cross section:
831 TrapezoidFinSetCfg.lbl.Thickness = Thickness:
832 TrapezoidFinSetCfg.lbl.Posrelativeto = Position relative to:
833 TrapezoidFinSetCfg.lbl.plus = plus
834 TrapezoidFinSetCfg.tab.General = General
835 TrapezoidFinSetCfg.tab.Generalproperties = General properties
837 !MotorConfigurationModel
838 MotorCfgModel.Editcfg = Edit configurations
840 ! StorageOptionChooser
841 StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
842 StorageOptChooser.rdbut.Allsimdata = All simulated data
843 StorageOptChooser.lbl.longA1 = <html>Store all simulated data.<br>
844 StorageOptChooser.lbl.longA2 = This can result in very large files!
845 StorageOptChooser.rdbut.Every = Every
846 StorageOptChooser.lbl.longB1 = <html>Store plottable values approximately this far apart.<br>
847 StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
848 StorageOptChooser.lbl.seconds = seconds
849 StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
850 StorageOptChooser.lbl.longC1 = <html>Store only the values shown in the summary table.<br>
851 StorageOptChooser.lbl.longC2 = This results in the smallest files.
852 StorageOptChooser.checkbox.Compfile = Compress file
853 StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
854 StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
855 StorageOptChooser.ttip.Saveopt = Save options
856 StorageOptChooser.lbl.Estfilesize = Estimated file size:
857 StorageOptChooser.lbl.Saveopt = Save options
859 ! ThrustCurveMotorSelectionPanel
860 TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
861 TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
862 TCMotorSelPan.SHOW_DESCRIPTIONS.desc1 = Show all motors
863 TCMotorSelPan.SHOW_DESCRIPTIONS.desc2 = Show motors with diameter less than that of the motor mount
864 TCMotorSelPan.SHOW_DESCRIPTIONS.desc3 = Show motors with diameter equal to that of the motor mount
865 TCMotorSelPan.lbl.Motormountdia = Motor mount diameter:
866 TCMotorSelPan.lbl.Search = Search:
867 TCMotorSelPan.lbl.Selectthrustcurve = Select thrust curve:
868 TCMotorSelPan.lbl.Ejectionchargedelay = Ejection charge delay:
869 TCMotorSelPan.equalsIgnoreCase.None = None
870 TCMotorSelPan.lbl.NumberofsecondsorNone = (Number of seconds or \"None\")
871 TCMotorSelPan.lbl.Totalimpulse = Total impulse:
872 TCMotorSelPan.lbl.Avgthrust = Avg. thrust:
873 TCMotorSelPan.lbl.Maxthrust = Max. thrust:
874 TCMotorSelPan.lbl.Burntime = Burn time:
875 TCMotorSelPan.lbl.Launchmass = Launch mass:
876 TCMotorSelPan.lbl.Emptymass = Empty mass:
877 TCMotorSelPan.lbl.Datapoints = Data points:
878 TCMotorSelPan.lbl.Digest = Digest:
879 TCMotorSelPan.title.Thrustcurve = Thrust curve:
880 TCMotorSelPan.title.Thrust = Thrust
881 TCMotorSelPan.delayBox.None = None
885 PlotDialog.title.Flightdataplot = Flight data plot
886 PlotDialog.Chart.Simulatedflight = Simulated flight
887 PlotDialog.CheckBox.Showdatapoints = Show data points
888 PlotDialog.lbl.Chart = Click+drag down+right to zoom in, up+left to zoom out
891 ! "main" prefix is used for the main application dialog
893 main.menu.file = File
894 main.menu.file.new = New
895 main.menu.file.open = Open...
896 main.menu.file.openExample = Open example...
897 main.menu.file.save = Save
898 main.menu.file.saveAs = Save as...
899 main.menu.file.print = Print / Export PDF...
900 main.menu.file.close = Close
901 main.menu.file.quit = Quit
903 main.menu.edit = Edit
904 main.menu.edit.undo = Undo
905 main.menu.edit.redo = Redo
906 main.menu.edit.cut = Cut
907 main.menu.edit.copy = Copy
908 main.menu.edit.paste = Paste
909 main.menu.edit.delete = Delete
910 main.menu.edit.preferences = Preferences
912 main.menu.analyze = Analyze
913 main.menu.analyze.componentAnalysis = Component analysis
915 main.menu.help = Help
916 main.menu.help.license = License
917 main.menu.help.bugReport = Bug report
918 main.menu.help.debugLog = Debug log
919 main.menu.help.about = About
921 main.menu.debug = Debug
922 main.menu.debug.whatisthismenu = What is this menu?
923 main.menu.debug.createtestrocket = Create test rocket
926 ! Translate here all material database
931 Databases.materials.Acrylic = Acrylic
932 Databases.materials.Balsa = Balsa
933 Databases.materials.Birch = Birch
934 Databases.materials.Cardboard = Cardboard
935 Databases.materials.Carbonfiber = Carbon fiber
936 Databases.materials.Cork = Cork
937 Databases.materials.DepronXPS = Depron (XPS)
938 Databases.materials.Fiberglass = Fiberglass
939 Databases.materials.Kraftphenolic = Kraft phenolic
940 Databases.materials.Maple = Maple
941 Databases.materials.Paperoffice = Paper (office)
942 Databases.materials.Pine = Pine
943 Databases.materials.Plywoodbirch = Plywood (birch)
944 Databases.materials.PolycarbonateLexan = Polycarbonate (Lexan)
945 Databases.materials.Polystyrene = Polystyrene
946 Databases.materials.PVC = PVC
947 Databases.materials.Spruce = Spruce
948 Databases.materials.StyrofoamgenericEPS = Styrofoam (generic EPS)
949 Databases.materials.StyrofoamBluefoamXPS = Styrofoam \"Blue foam\" (XPS)
950 Databases.materials.Quantumtubing = Quantum tubing
952 Databases.materials.Ripstopnylon = Ripstop nylon
953 Databases.materials.Mylar = Mylar
954 Databases.materials.Polyethylenethin = Polyethylene (thin)
955 Databases.materials.Polyethyleneheavy = Polyethylene (heavy)
956 Databases.materials.Silk = Silk
957 Databases.materials.Paperoffice = Paper (office)
958 Databases.materials.Cellophane = Cellophane
959 Databases.materials.Crepepaper = Cr\u00eape paper
961 Databases.materials.Threadheavy-duty = Thread (heavy-duty)
962 Databases.materials.Elasticcordround2mm = Elastic cord (round 2mm, 1/16 in)
963 Databases.materials.Elasticcordflat6mm = Elastic cord (flat 6mm, 1/4 in)
964 Databases.materials.Elasticcordflat12mm = Elastic cord (flat 12mm, 1/2 in)
965 Databases.materials.Elasticcordflat19mm = Elastic cord (flat 19mm, 3/4 in)
966 Databases.materials.Elasticcordflat25mm = Elastic cord (flat 25mm, 1 in)
967 Databases.materials.Braidednylon2mm = Braided nylon (2 mm, 1/16 in)
968 Databases.materials.Braidednylon3mm = Braided nylon (3 mm, 1/8 in)
969 Databases.materials.Tubularnylon11mm = Tubular nylon (11 mm, 7/16 in)
970 Databases.materials.Tubularnylon14mm = Tubular nylon (14 mm, 9/16 in)
971 Databases.materials.Tubularnylon25mm = Tubular nylon (25 mm, 1 in)
974 ExternalComponent.Rough = Rough
975 ExternalComponent.Unfinished = Unfinished
976 ExternalComponent.Regularpaint = Regular paint
977 ExternalComponent.Smoothpaint = Smooth paint
978 ExternalComponent.Polished = Polished
981 LineStyle.Solid = Solid
982 LineStyle.Dashed = Dashed
983 LineStyle.Dotted = Dotted
984 LineStyle.Dash-dotted = Dash-dotted
985 LineStyle.Defaultstyle = Default style
988 Shape.Conical = Conical
989 Shape.Conical.desc1 = A conical nose cone has a profile of a triangle.
990 Shape.Conical.desc2 = A conical transition has straight sides.
992 Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube, values less than 1 produce <b>secant ogives</b>.
993 Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube at the aft end, values less than 1 produce <b>secant ogives</b>.
994 Shape.Ellipsoid = Ellipsoid
995 Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>.
996 Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
997 Shape.Powerseries = Power series
998 Shape.Powerseries.desc1 = A power series nose cone has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 this is a <b>\u00BD-power</b> or <b>parabolic</b> nose cone, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 a <b>conical</b> nose cone.
999 Shape.Powerseries.desc2 = A power series transition has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 the transition is <b>\u00BD-power</b> or <b>parabolic</b>, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 <b>conical</b>.
1000 Shape.Parabolicseries = Parabolic series
1001 Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> nose cone.
1002 Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube at the aft end, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> transition.
1003 Shape.Haackseries = Haack series
1004 Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an <b>LV-Haack</b> nose cone, which minimizes drag for fixed length and volume.
1005 Shape.Haackseries.desc2 = The Haack series <i>nose cones</i> are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> shape, while a value of 0.333 produces an <b>LV-Haack</b> shape.
1009 RocketComponent.Position.TOP = Top of the parent component
1010 RocketComponent.Position.MIDDLE = Middle of the parent component
1011 RocketComponent.Position.BOTTOM = Bottom of the parent component
1012 RocketComponent.Position.AFTER = After the parent component
1013 RocketComponent.Position.ABSOLUTE = Tip of the nose cone
1016 LaunchLug.Launchlug = Launch lug
1018 NoseCone.NoseCone = Nose cone
1020 Transition.Transition = Transition
1024 BodyTube.BodyTube = Body tube
1026 TubeCoupler.TubeCoupler = Tube coupler
1028 InnerTube.InnerTube = Inner Tube
1030 TrapezoidFinSet.TrapezoidFinSet = Trapezoidal fin set
1032 FreeformFinSet.FreeformFinSet = Freeform fin set
1034 MassComponent.MassComponent = Mass component
1036 Parachute.Parachute = Parachute
1038 ShockCord.ShockCord = Shock cord
1040 Bulkhead.Bulkhead = Bulkhead
1043 Rocket.motorCount.Nomotor = [No motors]
1044 Rocket.compname.Rocket = Rocket
1047 MotorMount.IgnitionEvent.AUTOMATIC = Automatic (launch or ejection charge)
1048 MotorMount.IgnitionEvent.LAUNCH = Launch
1049 MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous stage
1050 MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage
1051 MotorMount.IgnitionEvent.NEVER = Never
1054 ComponentIcons.Nosecone = Nose cone
1055 ComponentIcons.Bodytube = Body tube
1056 ComponentIcons.Transition = Transition
1057 ComponentIcons.Trapezoidalfinset = Trapezoidal fin set
1058 ComponentIcons.Ellipticalfinset = Elliptical fin set
1059 ComponentIcons.Freeformfinset = Freeform fin set
1060 ComponentIcons.Launchlug = Launch lug
1061 ComponentIcons.Innertube = Inner tube
1062 ComponentIcons.Tubecoupler = Tube coupler
1063 ComponentIcons.Centeringring = Centering ring
1064 ComponentIcons.Bulkhead = Bulk head
1065 ComponentIcons.Engineblock = Engine block
1066 ComponentIcons.Parachute = Parachute
1067 ComponentIcons.Streamer = Streamer
1068 ComponentIcons.Shockcord = Shock cord
1069 ComponentIcons.Masscomponent = Mass component
1070 ComponentIcons.disabled = (disabled)
1073 StageAction.Stage = Stage
1076 RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds)
1077 RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage
1078 RecoveryDevice.DeployEvent.APOGEE = Apogee
1079 RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent
1080 RecoveryDevice.DeployEvent.NEVER = Never
1083 FlightEvent.Type.LAUNCH = Launch
1084 FlightEvent.Type.IGNITION = Motor ignition
1085 FlightEvent.Type.LIFTOFF = Lift-off
1086 FlightEvent.Type.LAUNCHROD = Launch rod clearance
1087 FlightEvent.Type.BURNOUT = Motor burnout
1088 FlightEvent.Type.EJECTION_CHARGE = Ejection charge
1089 FlightEvent.Type.STAGE_SEPARATION = Stage separation
1090 FlightEvent.Type.APOGEE = Apogee
1091 FlightEvent.Type.RECOVERY_DEVICE_DEPLOYMENT = Recovery device deployment
1092 FlightEvent.Type.GROUND_HIT = Ground hit
1093 FlightEvent.Type.SIMULATION_END = Simulation end
1094 FlightEvent.Type.ALTITUDE = Altitude change
1096 ! ThrustCurveMotorColumns
1097 TCurveMotorCol.MANUFACTURER = Manufacturer
1098 TCurveMotorCol.DESIGNATION = Designation
1099 TCurveMotorCol.TYPE = Type
1100 TCurveMotorCol.DIAMETER = Diameter
1101 TCurveMotorCol.LENGTH = Length
1104 RocketInfo.lengthLine.Length = Length
1105 RocketInfo.lengthLine.maxdiameter = , max. diameter
1106 RocketInfo.massText1 = Mass with motors
1107 RocketInfo.massText2 = Mass with no motors
1108 RocketInfo.at = at M=
1109 RocketInfo.cgText = CG:
1110 RocketInfo.cpText = CP:
1111 RocketInfo.stabText = Stability:
1112 RocketInfo.Warning = Warning:
1113 RocketInfo.Calculating = Calculating...
1114 RocketInfo.Apogee = Apogee:
1115 RocketInfo.Maxvelocity = Max. velocity:
1116 RocketInfo.Maxacceleration = Max. acceleration:
1117 RocketInfo.apogeeValue = N/A
1118 RocketInfo.Mach = (Mach
1119 RocketInfo.velocityValue = N/A
1120 RocketInfo.accelerationValue = N/A
1123 FinSet.CrossSection.SQUARE = Square
1124 FinSet.CrossSection.ROUNDED = Rounded
1125 FinSet.CrossSection.AIRFOIL = Airfoil
1126 FinSet.TabRelativePosition.FRONT = Root chord leading edge
1127 FinSet.TabRelativePosition.CENTER = Root chord midpoint
1128 FinSet.TabRelativePosition.END = Root chord trailing edge
1131 FlightDataType.TYPE_TIME = Time
1132 FlightDataType.TYPE_ALTITUDE = Altitude
1133 FlightDataType.TYPE_VELOCITY_Z = Vertical velocity
1134 FlightDataType.TYPE_ACCELERATION_Z = Vertical acceleration
1135 FlightDataType.TYPE_VELOCITY_TOTAL = Total velocity
1136 FlightDataType.TYPE_ACCELERATION_TOTAL = Total acceleration
1137 FlightDataType.TYPE_POSITION_X = Position upwind
1138 FlightDataType.TYPE_POSITION_Y = Position parallel to wind
1139 FlightDataType.TYPE_POSITION_XY = Lateral distance
1140 FlightDataType.TYPE_POSITION_DIRECTION = Lateral direction
1141 FlightDataType.TYPE_VELOCITY_XY = Lateral velocity
1142 FlightDataType.TYPE_ACCELERATION_XY = Lateral acceleration
1143 FlightDataType.TYPE_AOA = Angle of attack
1144 FlightDataType.TYPE_ROLL_RATE = Roll rate
1145 FlightDataType.TYPE_PITCH_RATE = Pitch rate
1146 FlightDataType.TYPE_YAW_RATE = Yaw rate
1147 FlightDataType.TYPE_MASS = Mass
1148 FlightDataType.TYPE_LONGITUDINAL_INERTIA = Longitudinal moment of inertia
1149 FlightDataType.TYPE_ROTATIONAL_INERTIA = Rotational moment of inertia
1150 FlightDataType.TYPE_CP_LOCATION = CP location
1151 FlightDataType.TYPE_CG_LOCATION = CG location
1152 FlightDataType.TYPE_STABILITY = Stability margin calibers
1153 FlightDataType.TYPE_MACH_NUMBER = Mach number
1154 FlightDataType.TYPE_REYNOLDS_NUMBER = Reynolds number
1155 FlightDataType.TYPE_THRUST_FORCE = Thrust
1156 FlightDataType.TYPE_DRAG_FORCE = Drag force
1157 FlightDataType.TYPE_DRAG_COEFF = Drag coefficient
1158 FlightDataType.TYPE_AXIAL_DRAG_COEFF = Axial drag coefficient
1159 FlightDataType.TYPE_FRICTION_DRAG_COEFF = Friction drag coefficient
1160 FlightDataType.TYPE_PRESSURE_DRAG_COEFF = Pressure drag coefficient
1161 FlightDataType.TYPE_BASE_DRAG_COEFF = Base drag coefficient
1162 FlightDataType.TYPE_NORMAL_FORCE_COEFF = Normal force coefficient
1163 FlightDataType.TYPE_PITCH_MOMENT_COEFF = Pitch moment coefficient
1164 FlightDataType.TYPE_YAW_MOMENT_COEFF = Yaw moment coefficient
1165 FlightDataType.TYPE_SIDE_FORCE_COEFF = Side force coefficient
1166 FlightDataType.TYPE_ROLL_MOMENT_COEFF = Roll moment coefficient
1167 FlightDataType.TYPE_ROLL_FORCING_COEFF = Roll forcing coefficient
1168 FlightDataType.TYPE_ROLL_DAMPING_COEFF = Roll damping coefficient
1169 FlightDataType.TYPE_PITCH_DAMPING_MOMENT_COEFF = Pitch damping coefficient
1170 FlightDataType.TYPE_YAW_DAMPING_MOMENT_COEFF = Yaw damping coefficient
1171 FlightDataType.TYPE_REFERENCE_LENGTH = Reference lenght
1172 FlightDataType.TYPE_REFERENCE_AREA = Reference area
1173 FlightDataType.TYPE_ORIENTATION_THETA = Vertical orientation (zenith)
1174 FlightDataType.TYPE_ORIENTATION_PHI = Lateral orientation (azimuth)
1175 FlightDataType.TYPE_WIND_VELOCITY = Wind velocity
1176 FlightDataType.TYPE_AIR_TEMPERATURE = Air temperature
1177 FlightDataType.TYPE_AIR_PRESSURE = Air pressure
1178 FlightDataType.TYPE_SPEED_OF_SOUND = Speed of sound
1179 FlightDataType.TYPE_TIME_STEP = Simulation time step
1180 FlightDataType.TYPE_COMPUTATION_TIME = Computation time
1183 PlotConfiguration.Verticalmotion = Vertical motion vs. time
1184 PlotConfiguration.Totalmotion = Total motion vs. time
1185 PlotConfiguration.Flightside = Flight side profile
1186 PlotConfiguration.Stability = Stability vs. time
1187 PlotConfiguration.Dragcoef = Drag coefficients vs. Mach number
1188 PlotConfiguration.Rollcharacteristics = Roll characteristics
1189 PlotConfiguration.Angleofattack = Angle of attack and orientation vs. time
1190 PlotConfiguration.Simulationtime = Simulation time step and computation time
1193 Warning.LargeAOA.str1 = Large angle of attack encountered.
1194 Warning.LargeAOA.str2 = Large angle of attack encountered (
1195 Warning.DISCONTINUITY = Discontinuity in rocket body diameter.
1196 Warning.THICK_FIN = Thick fins may not be modeled accurately.
1197 Warning.JAGGED_EDGED_FIN = Jagged-edged fin predictions may be inaccurate.
1198 Warning.LISTENERS_AFFECTED = Listeners modified the flight simulation
1199 Warning.RECOVERY_DEPLOYMENT_WHILE_BURNING = Recovery device opened while motor still burning.
1200 Warning.FILE_INVALID_PARAMETER = Invalid parameter encountered, ignoring.
projects / debian / openrocket / blob