3 # English base translation file
5 # Should you need to add new logical keys here is the proposed method
7 # className.ComponantType.componantName
12 ! Set to the name of the current translation file (used for debugging purposes)
13 debug.currentFile = messages.properties
16 RocketActions.checkbox.Donotaskmeagain = Do not ask me again
17 RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
18 RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
19 RocketActions.showConfirmDialog.lbl2 = <html><i>This operation cannot be undone.</i>
20 RocketActions.showConfirmDialog.title = Delete simulations
21 RocketActions.DelCompAct.Delete = Delete
22 RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
23 RocketActions.DelSimuAct.Delete = Delete
24 RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
25 RocketActions.DelAct.Delete = Delete
26 RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
27 RocketActions.CutAction.Cut = Cut
28 RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
29 RocketActions.CopyAct.Copy = Copy
30 RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
31 RocketActions.PasteAct.Paste = Paste
32 RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
33 RocketActions.EditAct.Edit = Edit
34 RocketActions.EditAct.ttip.Edit = Edit the selected component.
35 RocketActions.NewStageAct.Newstage = New stage
36 RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
37 RocketActions.ActBoosterstage = Booster stage
38 RocketActions.MoveUpAct.Moveup = Move up
39 RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
40 RocketActions.MoveDownAct.Movedown = Move down
41 RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
44 RocketPanel.FigTypeAct.Sideview = Side view
45 RocketPanel.FigTypeAct.ttip.Sideview = Side view
46 RocketPanel.FigTypeAct.Backview = Back view
47 RocketPanel.FigTypeAct.ttip.Backview = Rear view
48 RocketPanel.lbl.Motorcfg = Motor configuration:
49 RocketPanel.lbl.infoMessage = <html>Click to select Shift+click to select other Double-click to edit Click+drag to move
53 BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
54 BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
55 BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
56 BasicFrame.tab.Rocketdesign = Rocket design
57 BasicFrame.tab.Flightsim = Flight simulations
58 BasicFrame.title.Addnewcomp = Add new component
59 BasicFrame.item.Openrocketdesign = Open a rocket design
60 BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
61 BasicFrame.item.SavecurRocketdesign = Save the current rocket design
62 BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
63 BasicFrame.item.Printpart = Print parts list and fin template
64 BasicFrame.item.Closedesign = Close the current rocket design
65 BasicFrame.item.Quitprogram = Quit the program
66 BasicFrame.menu.Rocketedt = Rocket editing
67 BasicFrame.dlg.lbl1 = Design '
68 BasicFrame.dlg.lbl2 = ' has not been saved.
69 BasicFrame.dlg.lbl3 = Do you want to save it?
70 BasicFrame.dlg.title = Design not saved
72 ! Labels used in buttons of dialog windows
74 button.cancel = Cancel
77 ! Common labels used in buttons of dialog windows
79 dlg.but.cancel = Cancel
83 about.dlg.but.close = Close
84 about.dlg.lbl.translation =
85 about.dlg.lbl.transwebsite =
88 bugreport.dlg.title = Bug report
89 bugreport.dlg.but.Sendbugreport = Send bug report
90 bugreport.dlg.but.Sendbugreport.Ttip = Automatically send the bug report to the OpenRocket developers.
91 bugreport.dlg.successmsg1 = Bug report successfully sent.
92 bugreport.dlg.successmsg2 = Thank you for helping make OpenRocket better!
93 bugreport.dlg.successmsg3 = Bug report sent
96 debuglogdlg.but.clear = Clear
97 debuglogdlg.OpenRocketdebuglog = OpenRocket debug log
98 debuglogdlg.Displayloglines = Display log lines:
99 debuglogdlg.Follow = Follow
100 debuglogdlg.col.Time = Time
101 debuglogdlg.col.Level = Level
102 debuglogdlg.col.Location = Location
103 debuglogdlg.col.Message = Message
104 debuglogdlg.lbl.Loglinenbr = Log line number:
105 debuglogdlg.lbl.Time = Time:
106 debuglogdlg.lbl.Level = Level:
109 ! Edit Motor configuration dialog
110 edtmotorconfdlg.but.removemotor = Remove motor
111 edtmotorconfdlg.but.Selectmotor = Select motor
112 edtmotorconfdlg.but.Removeconfiguration = Remove configuration
113 edtmotorconfdlg.but.Newconfiguration = New configuration
114 edtmotorconfdlg.lbl.Motormounts = <html><b>Motor mounts:</b>
115 edtmotorconfdlg.title.Editmotorconf = Edit motor configurations
116 edtmotorconfdlg.selectcomp = <html>Select which components function as motor mounts:
117 edtmotorconfdlg.lbl.Motorconfig = <html><b>Motor configurations:</b>
118 edtmotorconfdlg.lbl.Configname = Configuration name:
119 edtmotorconfdlg.lbl.Leavenamedefault = Leave name empty for default.
121 ! Example design dialog
122 exdesigndlg.but.open = Open
125 printdlg.but.saveaspdf = Save as PDF
126 printdlg.but.preview = Preview
127 printdlg.but.settings = Settings
129 ! Material edit panel
130 matedtpan.but.new = New
131 matedtpan.but.edit = Edit
132 matedtpan.but.delete = Delete
133 matedtpan.but.revertall = Revert all
134 matedtpan.col.Material = Material
135 matedtpan.col.Type = Type
136 matedtpan.col.Density = Density
137 matedtpan.col.but.ttip.New = Add a new material
138 matedtpan.title.Addcustmaterial = Add a custom material
139 matedtpan.but.ttip.edit = Edit an existing material
140 matedtpan.title.Editmaterial = Edit material
141 matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
142 matedtpan.but.ttip.delete = Delete a user-defined material
143 matedtpan.but.ttip.revertall = Delete all user-defined materials
144 matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
145 matedtpan.title.Revertall = Revert all?
146 matedtpan.lbl.edtmaterials = <html><i>Editing materials will not affect existing rocket designs.</i>
149 MaterialModel.title.Material = Material
150 MaterialModel.title.Defcustmat = Define custom material
154 pref.dlg.but.add = Add
155 pref.dlg.but.reset = Reset
156 pref.dlg.but.checknow = Check now
157 pref.dlg.but.defaultmetric = Default metric
158 pref.dlg.but.defaultimperial = Default imperial
159 pref.dlg.title.Preferences = Preferences
160 pref.dlg.tab.Units = Units
161 pref.dlg.tab.Defaultunits = Default units
162 pref.dlg.tab.Materials = Materials
163 pref.dlg.tab.Custommaterials = Custom materials
164 pref.dlg.tab.Options = Options
165 pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
166 pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
167 pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
168 pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
169 pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
170 pref.dlg.RASPfiles = RASP motor files (*.eng)
171 pref.dlg.RockSimfiles = RockSim engine files (*.rse)
172 pref.dlg.ZIParchives = ZIP archives (*.zip)
173 pref.dlg.checkbox.Checkupdates = Check for software updates at startup
174 pref.dlg.ttip.Checkupdatesnow = Check for software updates now
175 pref.dlg.lbl.Selectprefunits = Select your preferred units:
176 pref.dlg.lbl.Rocketdimensions = Rocket dimensions:
177 pref.dlg.lbl.Linedensity = Line density:
178 pref.dlg.lbl.Motordimensions = Motor dimensions:
179 pref.dlg.lbl.Surfacedensity = Surface density:
180 pref.dlg.lbl.Distance = Distance:
181 pref.dlg.lbl.Bulkdensity = Bulk density::
182 pref.dlg.lbl.Velocity = Velocity:
183 pref.dlg.lbl.Surfaceroughness = Surface roughness:
184 pref.dlg.lbl.Acceleration = Acceleration:
185 pref.dlg.lbl.Area = Area:
186 pref.dlg.lbl.Mass = Mass:
187 pref.dlg.lbl.Angle = Angle:
188 pref.dlg.lbl.Force = Force:
189 pref.dlg.lbl.Rollrate = Roll rate:
190 pref.dlg.lbl.Totalimpulse = Total impulse:
191 pref.dlg.lbl.Temperature = Temperature:
192 pref.dlg.lbl.Momentofinertia = Moment of inertia:
193 pref.dlg.lbl.Pressure = Pressure:
194 pref.dlg.lbl.Stability = Stability:
195 pref.dlg.lbl.effect1 = The effects will take place the next time you open a window.
196 pref.dlg.lbl.Checkingupdates = Checking for updates...
197 pref.dlg.lbl.msg1 = An error occurred while communicating with the server.
198 pref.dlg.lbl.msg2 = Unable to retrieve update information
199 pref.dlg.lbl.msg3 = You are running the latest version of OpenRocket.
200 pref.dlg.lbl.msg4 = No updates available
202 ! Simulation edit dialog
203 simedtdlg.but.runsimulation = Run simulation
204 simedtdlg.but.resettodefault = Reset to default
205 simedtdlg.but.add = Add
206 simedtdlg.but.remove = Remove
207 simedtdlg.title.Editsim = Edit simulation
208 simedtdlg.lbl.Simname = Simulation name:
209 simedtdlg.tab.Launchcond = Launch conditions
210 simedtdlg.tab.Simopt = Simulation options
211 simedtdlg.tab.Plotdata = Plot data
212 simedtdlg.tab.Exportdata = Export data
213 simedtdlg.lbl.Motorcfg = Motor configuration:
214 simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
215 simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
216 simedtdlg.lbl.Wind = Wind
217 simedtdlg.lbl.Averwindspeed = Average windspeed:
218 simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
219 simedtdlg.lbl.Stddeviation = Standard deviation:
220 simedtdlg.lbl.ttip.Stddeviation = <html>The standard deviation of the windspeed.<br>The windspeed is within twice the standard deviation from the average for 95% of the time.
221 simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
222 simedtdlg.lbl.ttip.Turbulenceintensity1 = <html>The turbulence intensity is the standard deviation divided by the average windspeed.<br>
223 simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
224 simedtdlg.lbl.ttip.Turbulenceintensity3 = to
225 simedtdlg.border.Atmoscond = Atmospheric conditions
226 simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
227 simedtdlg.checkbox.ttip.InterStdAtmosphere1 = <html>Select to use the International Standard Atmosphere model.<br>This model has a temperature of
228 simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
229 simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
230 simedtdlg.lbl.Temperature = Temperature:
231 simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
232 simedtdlg.lbl.Pressure = Pressure:
233 simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
234 simedtdlg.lbl.Launchsite = Launch site
235 simedtdlg.lbl.Latitude = Latitude:
236 simedtdlg.lbl.ttip.Latitude = <html>The launch site latitude affects the gravitational pull of Earth.<br>Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
237 simedtdlg.lbl.Altitude = Altitude:
238 simedtdlg.lbl.ttip.Altitude = <html>The launch altitude above mean sea level.<br>This affects the position of the rocket in the atmospheric model.
239 simedtdlg.border.Launchrod = Launch rod
240 simedtdlg.lbl.Length = Length:
241 simedtdlg.lbl.ttip.Length = The length of the launch rod.
242 simedtdlg.lbl.Angle = Angle:
243 simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
244 simedtdlg.lbl.Direction = Direction:
245 simedtdlg.lbl.ttip.Direction1 = <html>Direction of the launch rod relative to the wind.<br>
246 simedtdlg.lbl.ttip.Direction2 = = towards the wind,
247 simedtdlg.lbl.ttip.Direction3 = = downwind.
248 simedtdlg.border.Simopt = Simulator options
249 simedtdlg.lbl.Calcmethod = Calculation method:
250 simedtdlg.lbl.ttip.Calcmethod = <html>The Extended Barrowman method calculates aerodynamic forces according <br>to the Barrowman equations extended to accommodate more components.
251 simedtdlg.lbl.ExtBarrowman = Extended Barrowman
252 simedtdlg.lbl.Simmethod = Simulation method:
253 simedtdlg.lbl.ttip.Simmethod1 = <html>The six degree-of-freedom simulator allows the rocket total freedom during flight.<br>
254 simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4<sup>th</sup> order Runge-Kutta 4 numerical integration.
255 simedtdlg.lbl.Timestep = Time step:
256 simedtdlg.lbl.ttip.Timestep1 = <html>The time between simulation steps.<br>A smaller time step results in a more accurate but slower simulation.<br>
257 simedtdlg.lbl.ttip.Timestep2 = The 4<sup>th</sup> order simulation method is quite accurate with a time step of
258 simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
259 simedtdlg.border.Simlist = Simulator listeners
260 simedtdlg.txt.longA1 = <html><i>Simulation listeners</i> is an advanced feature that allows user-written code to listen to and interact with the simulation.
261 simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
262 simedtdlg.lbl.Curlist = Current listeners:
263 simedtdlg.lbl.Addsimlist = Add simulation listener
264 simedtdlg.lbl.Noflightdata = No flight data available.
265 simedtdlg.lbl.runsimfirst = Please run the simulation first.
266 simedtdlg.chart.Simflight = Simulated flight
267 simedtdlg.dlg.Simres = Simulation results
272 simpanel.but.newsimulation = New simulation
273 simpanel.but.editsimulation = Edit simulation
274 simpanel.but.runsimulations = Run simulations
275 simpanel.but.deletesimulations = Delete simulations
276 simpanel.but.plotexport = Plot / export
277 simpanel.but.ttip.newsimulation = Add a new simulation
278 simpanel.but.ttip.editsim = Edit the selected simulation
279 simpanel.but.ttip.runsimu = Re-run the selected simulations
280 simpanel.but.ttip.deletesim = Delete the selected simulations
281 simpanel.checkbox.donotask = Do not ask me again
282 simpanel.lbl.defpref = You can change the default operation in the preferences.
283 simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
284 simpanel.dlg.lbl.DeleteSim2 = <html><i>This operation cannot be undone.</i>
285 simpanel.dlg.lbl.DeleteSim3 = Delete simulations
286 simpanel.col.Name = Name
287 simpanel.col.Motors = Motors
288 simpanel.col.Apogee = Apogee
289 simpanel.col.Maxvelocity = Max. velocity
290 simpanel.col.Maxacceleration = Max. acceleration
291 simpanel.col.Timetoapogee = Time to apogee
292 simpanel.col.Flighttime = Flight time
293 simpanel.col.Groundhitvelocity = Ground hit velocity
295 ! SimulationRunDialog
296 SimuRunDlg.title.RunSim = Running simulations...
297 SimuRunDlg.lbl.Running = Running ...
298 SimuRunDlg.lbl.Simutime = Simulation time:
299 SimuRunDlg.lbl.Altitude = Altitude:
300 SimuRunDlg.lbl.Velocity = Velocity:
301 SimuRunDlg.msg.Unabletosim = Unable to simulate:
302 SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
303 SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
304 SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
305 SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
306 SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
307 SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
308 SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
312 ! SimulationExportPanel
313 SimExpPan.desc = Comma Separated Files (*.csv)
314 SimExpPan.border.Vartoexport = Variables to export
315 SimExpPan.but.Selectall = Select all
316 SimExpPan.but.Selectnone = Select none
317 SimExpPan.border.Fieldsep = Field separator
318 SimExpPan.lbl.Fieldsepstr = Field separator string:
319 SimExpPan.lbl.longA1 = <html>The string used to separate the fields in the exported file.<br>
320 SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
321 SimExpPan.checkbox.Includesimudesc = Include simulation description
322 SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
323 SimExpPan.border.Comments = Comments
324 SimExpPan.checkbox.Includefielddesc = Include field descriptions
325 SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
326 SimExpPan.checkbox.Incflightevents = Include flight events
327 SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
328 SimExpPan.lbl.Commentchar = Comment character:
329 SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
330 SimExpPan.but.Exporttofile = Export to file...
333 MotorPlot.title.Motorplot = Motor plot
334 MotorPlot.but.Select = Select
335 MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
336 MotorPlot.Chart.Time = Time / s
337 MotorPlot.Chart.Thrust = Thrust / N
338 MotorPlot.txt.Designation = Designation:
339 MotorPlot.txt.Manufacturer = Manufacturer:
340 MotorPlot.txt.Type = Type:
341 MotorPlot.txt.Delays = Delays:
342 MotorPlot.txt.Comment = Comment:\n
346 ! Simulation plot panel
347 simplotpanel.lbl.Presetplotconf = Preset plot configurations:
348 simplotpanel.lbl.Xaxistype = X axis type:
349 simplotpanel.lbl.Unit = Unit:
350 simplotpanel.lbl.Yaxistypes = Y axis types:
351 simplotpanel.lbl.Flightevents = Flight events:
352 simplotpanel.but.All = All
353 simplotpanel.but.None = None
354 simplotpanel.but.NewYaxisplottype = New Y axis plot type
355 simplotpanel.but.Plotflight = Plot flight
356 simplotpanel.lbl.Axis = Axis:
357 simplotpanel.but.ttip.Removethisplot = Remove this plot
358 simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
359 simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
360 simplotpanel.OptionPane.lbl2 = Cannot add plot
363 ! Component add buttons
364 compaddbuttons.Bodycompandfinsets = Body components and fin sets
365 compaddbuttons.Nosecone = Nose cone
366 compaddbuttons.Bodytube = Body tube
367 compaddbuttons.Transition = Transition
368 compaddbuttons.Trapezoidal = Trapezoidal
369 compaddbuttons.Elliptical = Elliptical
370 compaddbuttons.Freeform = Freeform
371 compaddbuttons.Launchlug = Launch lug
372 compaddbuttons.Innercomponent = Inner component
373 compaddbuttons.Innertube = Inner tube
374 compaddbuttons.Coupler = Coupler
375 compaddbuttons.Centeringring = Centering\nring
376 compaddbuttons.Bulkhead = Bulkhead
377 compaddbuttons.Engineblock = Engine\nblock
378 compaddbuttons.Massobjects = Mass objects
379 compaddbuttons.Parachute = Parachute
380 compaddbuttons.Streamer = Streamer
381 compaddbuttons.Shockcord = Shock cord
382 compaddbuttons.Masscomponent = Mass\ncomponent
383 compaddbuttons.Donotaskmeagain = Do not ask me again
384 compaddbuttons.Selectcomppos = Select component position
385 compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
386 compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
387 compaddbuttons.askPosition.Inserthere = Insert here
388 compaddbuttons.askPosition.Addtotheend = Add to the end
389 compaddbuttons.askPosition.Cancel = Cancel
391 ! Component Analysis Dialog
392 componentanalysisdlg.componentanalysis = Component analysis
393 componentanalysisdlg.lbl.winddir = Wind direction:
394 componentanalysisdlg.TitledBorder.warnings = Warnings:
395 componentanalysisdlg.ToggleBut.worst = Worst
396 componentanalysisdlg.lbl.angleofattack = Angle of attack:
397 componentanalysisdlg.lbl.machnumber = Mach number:
398 componentanalysisdlg.lbl.rollrate = Roll rate:
399 componentanalysisdlg.lbl.activestages = Active stages:
400 componentanalysisdlg.lbl.motorconf = Motor configuration:
401 componentanalysisdlg.TabStability.Col = Component
402 componentanalysisdlg.TabStability = Stability
403 componentanalysisdlg.TabStability.ttip = Stability information
404 componentanalysisdlg.dragTableModel.Col.Component = Component
405 componentanalysisdlg.dragTableModel.Col.Pressure = <html>Pressure C<sub>D</sub>
406 componentanalysisdlg.dragTableModel.Col.Base = <html>Base C<sub>D</sub>
407 componentanalysisdlg.dragTableModel.Col.friction = <html>Friction C<sub>D</sub>
408 componentanalysisdlg.dragTableModel.Col.total = <html>Total C<sub>D</sub>
409 componentanalysisdlg.dragTabchar = Drag characteristics
410 componentanalysisdlg.dragTabchar.ttip = Drag characteristics
411 componentanalysisdlg.rollTableModel.Col.component = Component
412 componentanalysisdlg.rollTableModel.Col.rollforc = Roll forcing coefficient
413 componentanalysisdlg.rollTableModel.Col.rolldamp = Roll damping coefficient
414 componentanalysisdlg.rollTableModel.Col.total = <html>Total C<sub>l</sub>
415 componentanalysisdlg.rollTableModel = Roll dynamics
416 componentanalysisdlg.rollTableModel.ttip = Roll dynamics
417 componentanalysisdlg.println.closingmethod = Closing method called:
418 componentanalysisdlg.println.settingnam = SETTING NAN VALUES
419 componentanalysisdlg.lbl.reflenght = Reference length:
420 componentanalysisdlg.lbl.refarea = Reference area:
421 !componentanalysisdlg.But.close =Close
423 ! Custom Material dialog
424 custmatdlg.title.Custommaterial = Custom material
425 custmatdlg.lbl.Materialname = Material name:
426 custmatdlg.lbl.Materialtype = Material type:
427 custmatdlg.lbl.Materialdensity = Material density:
428 custmatdlg.checkbox.Addmaterial = Add material to database
431 ! Ring Component Config
432 ringcompcfg.OuterRadius = OuterRadius
433 ringcompcfg.Automatic = Automatic
434 ringcompcfg.InnerRadius = InnerRadius
435 ringcompcfg.Thickness = Thickness
436 ringcompcfg.Length = Length
437 ringcompcfg.Positionrelativeto = Position relative to:
438 ringcompcfg.plus = plus
439 ringcompcfg.PositionValue = PositionValue
440 ringcompcfg.Radialdistance = Radial distance:
441 ringcompcfg.Distancefrom = Distance from the rocket centerline
442 ringcompcfg.Radialdirection = Radial direction
443 ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
444 ringcompcfg.but.Reset = Reset
445 ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
448 BodyTubecfg.lbl.Bodytubelength = Body tube length:
449 BodyTubecfg.lbl.Outerdiameter = Outer diameter:
450 BodyTubecfg.lbl.Innerdiameter = Inner diameter:
451 BodyTubecfg.lbl.Wallthickness = Wall thickness:
452 BodyTubecfg.tab.General = General
453 BodyTubecfg.tab.Generalproperties = General properties
454 BodyTubecfg.tab.Motor = Motor
455 BodyTubecfg.tab.Motormountconf = Motor mount configuration
456 BodyTubecfg.checkbox.Automatic = Automatic
457 BodyTubecfg.checkbox.Filled = Filled
460 FinSetConfig.tab.Fintabs = Fin tabs
461 FinSetConfig.tab.Through-the-wall = Through-the-wall fin tabs
462 FinSetConfig.but.Converttofreeform = Convert to freeform
463 FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
464 FinSetConfig.Convertfinset = Convert fin set
465 FinSetConfig.but.Splitfins = Split fins
466 FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
467 FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
468 FinSetConfig.lbl.Tablength = Tab length:
469 FinSetConfig.ttip.Tablength = The length of the fin tab.
470 FinSetConfig.lbl.Tabheight = Tab height:
471 FinSetConfig.ttip.Tabheight = The spanwise height of the fin tab.
472 FinSetConfig.lbl.Tabposition = Tab position:
473 FinSetConfig.ttip.Tabposition = The position of the fin tab.
474 FinSetConfig.lbl.relativeto = relative to
476 ! MotorDatabaseLoadingDialog
477 MotorDbLoadDlg.title = Loading motors
478 MotorDbLoadDlg.Loadingmotors = Loading motors...
481 RocketCfg.lbl.Designname = Design name:
482 RocketCfg.lbl.Designer = Designer:
483 RocketCfg.lbl.Comments = Comments:
484 RocketCfg.lbl.Revisionhistory = Revision history:
485 RocketCfg.lbl.Material = Material:
488 ShockCordCfg.lbl.Shockcordlength = Shock cord length
490 ! RocketComponentConfig
491 RocketCompCfg.lbl.Componentname = Component name:
492 RocketCompCfg.ttip.Thecomponentname = The component name.
493 RocketCompCfg.tab.Override = Override
494 RocketCompCfg.tab.MassandCGoverride = Mass and CG override options
495 RocketCompCfg.tab.Figure = Figure
496 RocketCompCfg.tab.Figstyleopt = Figure style options
497 RocketCompCfg.tab.Comment = Comment
498 RocketCompCfg.tab.Specifyacomment = Specify a comment for the component
499 RocketCompCfg.lbl.Mass = Mass:
500 RocketCompCfg.lbl.Componentmass = Component mass:
501 RocketCompCfg.lbl.overriddento = (overridden to
502 RocketCompCfg.lbl.overriddenby = (overridden by
503 RocketCompCfg.lbl.Componentmaterial = Component material:
504 RocketCompCfg.lbl.Componentfinish = Component finish:
505 RocketCompCfg.lbl.ttip.componentmaterialaffects = The component material affects the weight of the component.
506 RocketCompCfg.combo.ttip.componentmaterialaffects = The component material affects the weight of the component.
507 RocketCompCfg.lbl.longA1 = <html>The component finish affects the aerodynamic drag of the component.<br>
508 RocketCompCfg.lbl.longA2 = The value indicated is the average roughness height of the surface.
509 RocketCompCfg.but.Setforall = Set for all
510 RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
511 RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
512 RocketCompCfg.checkbox.Overridemass = Override mass:
513 RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
514 RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
515 RocketCompCfg.lbl.longB1 = <html>The overridden mass does not include motors.<br>
516 RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
517 RocketCompCfg.lbl.Commentsonthe = Comments on the
518 RocketCompCfg.lbl.Figurestyle = Figure style:
519 RocketCompCfg.lbl.Componentcolor = Component color:
520 RocketCompCfg.lbl.Choosecolor = Choose color
521 RocketCompCfg.checkbox.Usedefaultcolor = Use default color
522 RocketCompCfg.lbl.Complinestyle = Component line style:
523 RocketCompCfg.but.Saveasdefstyle = Save as default style
524 RocketCompCfg.lbl.Diameter = Diameter:
525 RocketCompCfg.lbl.Length = Length:
526 RocketCompCfg.lbl.Thickness = Thickness:
527 RocketCompCfg.checkbox.Endcapped = End capped
528 RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
529 RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
530 RocketCompCfg.title.Aftshoulder = Aft shoulder
531 RocketCompCfg.border.Foreshoulder = Fore shoulder
532 !RocketCompCfg.lbl.Length = Length:
535 BulkheadCfg.tab.Radius = Radius:
536 BulkheadCfg.tab.Thickness = Thickness:
537 BulkheadCfg.tab.General = General
538 BulkheadCfg.tab.Generalproperties = General properties
541 CenteringRingCfg.tab.Outerdiam = Outer diameter:
542 CenteringRingCfg.tab.Innerdiam = Inner diameter:
543 CenteringRingCfg.tab.Thickness = Thickness:
544 CenteringRingCfg.tab.General = General
545 CenteringRingCfg.tab.Generalproperties = General properties
547 !ComponentConfigDialog
548 ComponentCfgDlg.configuration = configuration
549 ComponentCfgDlg.Modify = Modify
551 !EllipticalFinSetConfig
552 EllipticalFinSetCfg.Nbroffins = Number of fins:
553 EllipticalFinSetCfg.Rotation = Rotation:
554 EllipticalFinSetCfg.Fincant = Fin cant:
555 EllipticalFinSetCfg.Rootchord = Root chord:
556 EllipticalFinSetCfg.Height = Height:
557 EllipticalFinSetCfg.Positionrelativeto = Position relative to:
558 EllipticalFinSetCfg.plus = plus
559 EllipticalFinSetCfg.FincrossSection = Fin cross section:
560 EllipticalFinSetCfg.Thickness = Thickness:
561 EllipticalFinSetCfg.General = General
562 EllipticalFinSetCfg.Generalproperties = General properties
563 EllipticalFinSetCfg.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
565 !FreeformFinSetConfig
566 FreeformFinSetCfg.tab.General = General
567 FreeformFinSetCfg.tab.ttip.General = General properties
568 FreeformFinSetCfg.tab.Shape = Shape
569 FreeformFinSetCfg.tab.ttip.Finshape = Fin shape
570 FreeformFinSetCfg.lbl.Numberoffins = Number of fins:
571 FreeformFinSetCfg.lbl.Finrotation = Fin rotation:
572 FreeformFinSetCfg.lbl.Fincant = Fin cant:
573 FreeformFinSetCfg.lbl.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
574 FreeformFinSetCfg.lbl.Posrelativeto = Position relative to:
575 FreeformFinSetCfg.lbl.plus = plus
576 FreeformFinSetCfg.lbl.FincrossSection = Fin cross section:
577 FreeformFinSetCfg.lbl.Thickness = Thickness:
580 InnerTubeCfg.tab.Motor = Motor
581 InnerTubeCfg.tab.ttip.Motor = Motor mount configuration
582 InnerTubeCfg.tab.Cluster = Cluster
583 InnerTubeCfg.tab.ttip.Cluster = Cluster configuration
584 InnerTubeCfg.tab.Radialpos = Radial position
585 InnerTubeCfg.tab.ttip.Radialpos = Radial position
586 InnerTubeCfg.lbl.Selectclustercfg = Select cluster configuration:
587 InnerTubeCfg.lbl.TubeSep = Tube separation:
588 InnerTubeCfg.lbl.ttip.TubeSep = The separation of the tubes, 1.0 = touching each other
589 InnerTubeCfg.lbl.Rotation = Rotation:
590 InnerTubeCfg.lbl.ttip.Rotation = Rotation angle of the cluster configuration
591 InnerTubeCfg.lbl.Rotangle = Rotation angle of the cluster configuration
592 InnerTubeCfg.but.Splitcluster = Split cluster
593 InnerTubeCfg.lbl.longA1 = <html>Split the cluster into separate components.<br>
594 InnerTubeCfg.lbl.longA2 = This also duplicates all components attached to this inner tube.
595 InnerTubeCfg.but.Resetsettings = Reset settings
596 InnerTubeCfg.but.ttip.Resetsettings = Reset the separation and rotation to the default values
599 LaunchLugCfg.lbl.Length = Length:
600 LaunchLugCfg.lbl.Outerdiam = Outer diameter:
601 LaunchLugCfg.lbl.Innerdiam = Inner diameter:
602 LaunchLugCfg.lbl.Thickness = Thickness:
603 LaunchLugCfg.lbl.Radialpos = Radial position:
604 LaunchLugCfg.lbl.Posrelativeto = Position relative to:
605 LaunchLugCfg.lbl.plus = plus
606 LaunchLugCfg.tab.General = General
607 LaunchLugCfg.tab.Generalprop = General properties
609 ! MassComponentConfig
610 MassComponentCfg.lbl.Mass = Mass
611 MassComponentCfg.lbl.Length = Length
612 MassComponentCfg.lbl.Diameter = Diameter
613 MassComponentCfg.lbl.PosRelativeto = Position relative to:
614 MassComponentCfg.lbl.plus = plus
615 MassComponentCfg.tab.General = General
616 MassComponentCfg.tab.ttip.General = General properties
617 MassComponentCfg.tab.Radialpos = Radial position
618 MassComponentCfg.tab.ttip.Radialpos = Radial position configuration
619 MassComponentCfg.lbl.Radialdistance = Radial distance:
620 MassComponentCfg.lbl.Radialdirection = Radial direction:
621 MassComponentCfg.but.Reset = Reset
624 MotorCfg.checkbox.compmotormount = This component is a motor mount
625 MotorCfg.lbl.Motorcfg = Motor configuration:
626 MotorCfg.but.New = New
627 MotorCfg.lbl.Currentmotor = Current motor:
628 MotorCfg.lbl.Motoroverhang = Motor overhang:
629 MotorCfg.lbl.Ignitionat = Ignition at:
630 MotorCfg.lbl.plus = plus
631 MotorCfg.lbl.seconds = seconds
632 MotorCfg.lbl.longA1 = The current design has only one stage.
633 MotorCfg.lbl.longA2 = Stages can be added by clicking \"New stage\".
634 MotorCfg.lbl.longB1 = The current design has
635 MotorCfg.lbl.longB2 = stages.
636 MotorCfg.but.Selectmotor = Select motor
637 MotorCfg.but.Removemotor = Remove motor
638 MotorCfg.lbl.motorLabel = None
641 NoseConeCfg.lbl.Noseconeshape = Nose cone shape:
642 NoseConeCfg.lbl.Shapeparam = Shape parameter:
643 NoseConeCfg.lbl.Noseconelength = Nose cone length:
644 NoseConeCfg.lbl.Basediam = Base diameter:
645 NoseConeCfg.checkbox.Automatic = Automatic
646 NoseConeCfg.lbl.Wallthickness = Wall thickness:
647 NoseConeCfg.checkbox.Filled = Filled
648 NoseConeCfg.tab.General = General
649 NoseConeCfg.tab.ttip.General = General properties
650 NoseConeCfg.tab.Shoulder = Shoulder
651 NoseConeCfg.tab.ttip.Shoulder = Shoulder properties
654 ParachuteCfg.lbl.Canopy = Canopy:
655 ParachuteCfg.lbl.Diameter = Diameter:
656 ParachuteCfg.lbl.Material = Material:
657 ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
658 ParachuteCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
659 ParachuteCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the parachute.<br>
660 ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
661 ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
662 ParachuteCfg.but.Reset = Reset
663 ParachuteCfg.lbl.Shroudlines = Shroud lines:
664 ParachuteCfg.lbl.Numberoflines = Number of lines:
665 ParachuteCfg.lbl.Linelength = Line length:
666 ParachuteCfg.lbl.Material = Material:
667 ParachuteCfg.lbl.Posrelativeto = Position relative to:
668 ParachuteCfg.lbl.plus = plus
669 ParachuteCfg.lbl.Packedlength = Packed length:
670 ParachuteCfg.lbl.Packeddiam = Packed diameter:
671 ParachuteCfg.lbl.Deploysat = Deploys at:
672 ParachuteCfg.lbl.seconds = seconds
673 ParachuteCfg.lbl.Altitude = Altitude:
674 ParachuteCfg.tab.General = General
675 ParachuteCfg.tab.ttip.General = General properties
676 ParachuteCfg.tab.Radialpos = Radial position
677 ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
678 ParachuteCfg.lbl.Radialdistance = Radial distance:
679 ParachuteCfg.lbl.Radialdirection = Radial direction:
680 ParachuteCfg.but.Reset = Reset
683 ShockCordCfg.lbl.Shockcordlength = Shock cord length
684 ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
685 ShockCordCfg.lbl.Posrelativeto = Position relative to:
686 ShockCordCfg.lbl.plus = plus
687 ShockCordCfg.lbl.Packedlength = Packed length:
688 ShockCordCfg.lbl.Packeddiam = Packed diameter:
689 ShockCordCfg.tab.General = General
690 ShockCordCfg.tab.ttip.General = General properties
693 SleeveCfg.tab.Outerdiam = Outer diameter:
694 SleeveCfg.tab.Innerdiam = Inner diameter:
695 SleeveCfg.tab.Wallthickness = Wall thickness:
696 SleeveCfg.tab.Length = Length:
697 SleeveCfg.tab.General = General
698 SleeveCfg.tab.Generalproperties = General properties
701 StreamerCfg.lbl.Striplength = Strip length:
702 StreamerCfg.lbl.Stripwidth = Strip width:
703 StreamerCfg.lbl.Striparea = Strip area:
704 StreamerCfg.lbl.Aspectratio = Aspect ratio:
705 StreamerCfg.lbl.Material = Material:
706 StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight of the component.
707 StreamerCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
708 StreamerCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the streamer.<br>
709 StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
710 StreamerCfg.lbl.Automatic = Automatic
711 StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
712 StreamerCfg.lbl.Posrelativeto = Position relative to:
713 StreamerCfg.lbl.plus = plus
714 StreamerCfg.lbl.Packedlength = Packed length:
715 StreamerCfg.lbl.Packeddiam = Packed diameter:
716 StreamerCfg.lbl.Deploysat = Deploys at:
717 StreamerCfg.lbl.seconds = seconds
718 StreamerCfg.lbl.Altitude = Altitude:
719 StreamerCfg.tab.General = General
720 StreamerCfg.tab.ttip.General = General properties
721 StreamerCfg.tab.Radialpos = Radial position
722 StreamerCfg.tab.ttip.Radialpos = Radial position configuration
723 StreamerCfg.lbl.Radialdistance = Radial distance:
724 StreamerCfg.lbl.Radialdirection = Radial direction:
725 StreamerCfg.but.Reset = Reset
727 ! ThicknessRingComponentConfig
728 ThicknessRingCompCfg.tab.Outerdiam = Outer diameter:
729 ThicknessRingCompCfg.tab.Innerdiam = Inner diameter:
730 ThicknessRingCompCfg.tab.Wallthickness = Wall thickness:
731 ThicknessRingCompCfg.tab.Length = Length:
732 ThicknessRingCompCfg.tab.General = General
733 ThicknessRingCompCfg.tab.Generalprop = General properties
736 TransitionCfg.lbl.Transitionshape = Transition shape:
737 TransitionCfg.checkbox.Clipped = Clipped
738 TransitionCfg.lbl.Shapeparam = Shape parameter:
739 TransitionCfg.lbl.Transitionlength = Transition length:
740 TransitionCfg.lbl.Forediam = Fore diameter:
741 TransitionCfg.checkbox.Automatic = Automatic
742 TransitionCfg.lbl.Aftdiam = Aft diameter:
743 TransitionCfg.lbl.Wallthickness = Wall thickness:
744 TransitionCfg.checkbox.Filled = Filled
745 TransitionCfg.tab.General = General
746 TransitionCfg.tab.Generalproperties = General properties
747 TransitionCfg.tab.Shoulder = Shoulder
748 TransitionCfg.tab.Shoulderproperties = Shoulder properties
750 ! TrapezoidFinSetConfig
751 TrapezoidFinSetCfg.lbl.Nbroffins = Number of fins:
752 TrapezoidFinSetCfg.lbl.ttip.Nbroffins = The number of fins in the fin set.
753 TrapezoidFinSetCfg.lbl.Finrotation = Fin rotation:
754 TrapezoidFinSetCfg.lbl.ttip.Finrotation = The angle of the first fin in the fin set.
755 TrapezoidFinSetCfg.lbl.Fincant = Fin cant:
756 TrapezoidFinSetCfg.lbl.ttip.Fincant =The angle that the fins are canted with respect to the rocket body.
757 TrapezoidFinSetCfg.lbl.Rootchord = Root chord:
758 TrapezoidFinSetCfg.lbl.Tipchord = Tip chord:
759 TrapezoidFinSetCfg.lbl.Height = Height:
760 TrapezoidFinSetCfg.lbl.Sweeplength = Sweep length:
761 TrapezoidFinSetCfg.lbl.Sweepangle = Sweep angle:
762 TrapezoidFinSetCfg.lbl.FincrossSection = Fin cross section:
763 TrapezoidFinSetCfg.lbl.Thickness = Thickness:
764 TrapezoidFinSetCfg.lbl.Posrelativeto = Position relative to:
765 TrapezoidFinSetCfg.lbl.plus = plus
766 TrapezoidFinSetCfg.tab.General = General
767 TrapezoidFinSetCfg.tab.Generalproperties = General properties
769 !MotorConfigurationModel
770 MotorCfgModel.Editcfg = Edit configurations
772 ! StorageOptionChooser
773 StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
774 StorageOptChooser.rdbut.Allsimdata = All simulated data
775 StorageOptChooser.lbl.longA1 = <html>Store all simulated data.<br>
776 StorageOptChooser.lbl.longA2 = This can result in very large files!
777 StorageOptChooser.rdbut.Every = Every
778 StorageOptChooser.lbl.longB1 = <html>Store plottable values approximately this far apart.<br>
779 StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
780 StorageOptChooser.lbl.seconds = seconds
781 StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
782 StorageOptChooser.lbl.longC1 = <html>Store only the values shown in the summary table.<br>
783 StorageOptChooser.lbl.longC2 = This results in the smallest files.
784 StorageOptChooser.checkbox.Compfile = Compress file
785 StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
786 StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
787 StorageOptChooser.ttip.Saveopt = Save options
788 StorageOptChooser.lbl.Estfilesize = Estimated file size:
789 StorageOptChooser.lbl.Saveopt = Save options
791 ! ThrustCurveMotorSelectionPanel
792 TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
793 TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
796 PlotDialog.title.Flightdataplot = Flight data plot
797 PlotDialog.Chart.Simulatedflight = Simulated flight
798 PlotDialog.CheckBox.Showdatapoints = Show data points
799 PlotDialog.lbl.Chart = Click+drag down+right to zoom in, up+left to zoom out
802 ! "main" prefix is used for the main application dialog
804 main.menu.file = File
805 main.menu.file.new = New
806 main.menu.file.open = Open...
807 main.menu.file.openExample = Open example...
808 main.menu.file.save = Save
809 main.menu.file.saveAs = Save as...
810 main.menu.file.print = Print...
811 main.menu.file.close = Close
812 main.menu.file.quit = Quit
814 main.menu.edit = Edit
815 main.menu.edit.undo = Undo
816 main.menu.edit.redo = Redo
817 main.menu.edit.cut = Cut
818 main.menu.edit.copy = Copy
819 main.menu.edit.paste = Paste
820 main.menu.edit.delete = Delete
821 main.menu.edit.preferences = Preferences
823 main.menu.analyze = Analyze
824 main.menu.analyze.componentAnalysis = Component analysis
826 main.menu.help = Help
827 main.menu.help.license = License
828 main.menu.help.bugReport = Bug report
829 main.menu.help.debugLog = Debug log
830 main.menu.help.about = About
832 main.menu.debug = Debug
833 main.menu.debug.whatisthismenu = What is this menu?
834 main.menu.debug.createtestrocket = Create test rocket
projects / debian / openrocket / blob