3 # English base translation file
5 # Should you need to add new logical keys here is the proposed method
7 # className.ComponentType.componentName
12 ! Set to the name of the current translation file (used for debugging purposes)
13 debug.currentFile = messages.properties
16 RocketActions.checkbox.Donotaskmeagain = Do not ask me again
17 RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
18 RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
19 RocketActions.showConfirmDialog.lbl2 = <html><i>This operation cannot be undone.</i>
20 RocketActions.showConfirmDialog.title = Delete simulations
21 RocketActions.DelCompAct.Delete = Delete
22 RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
23 RocketActions.DelSimuAct.Delete = Delete
24 RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
25 RocketActions.DelAct.Delete = Delete
26 RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
27 RocketActions.CutAction.Cut = Cut
28 RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
29 RocketActions.CopyAct.Copy = Copy
30 RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
31 RocketActions.PasteAct.Paste = Paste
32 RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
33 RocketActions.EditAct.Edit = Edit
34 RocketActions.EditAct.ttip.Edit = Edit the selected component.
35 RocketActions.NewStageAct.Newstage = New stage
36 RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
37 RocketActions.ActBoosterstage = Booster stage
38 RocketActions.MoveUpAct.Moveup = Move up
39 RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
40 RocketActions.MoveDownAct.Movedown = Move down
41 RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
44 RocketPanel.FigTypeAct.Sideview = Side view
45 RocketPanel.FigTypeAct.ttip.Sideview = Side view
46 RocketPanel.FigTypeAct.Backview = Back view
47 RocketPanel.FigTypeAct.ttip.Backview = Rear view
48 RocketPanel.lbl.Motorcfg = Motor configuration:
49 RocketPanel.lbl.infoMessage = <html>Click to select Shift+click to select other Double-click to edit Click+drag to move
53 BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
54 BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
55 BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
56 BasicFrame.tab.Rocketdesign = Rocket design
57 BasicFrame.tab.Flightsim = Flight simulations
58 BasicFrame.title.Addnewcomp = Add new component
59 BasicFrame.dlg.lbl1 = Design '
60 BasicFrame.dlg.lbl2 = ' has not been saved.
61 BasicFrame.dlg.lbl3 = Do you want to save it?
62 BasicFrame.dlg.title = Design not saved
63 BasicFrame.StageName.Sustainer = Sustainer
64 BasicFrame.WarningDialog.txt1 = The following problems were encountered while opening
65 BasicFrame.WarningDialog.txt2 = Some design features may not have been loaded correctly.
66 BasicFrame.WarningDialog.title = Warnings while opening file
68 ! Labels used in buttons of dialog windows
70 button.cancel = Cancel
73 ! Common labels used in buttons of dialog windows
75 dlg.but.cancel = Cancel
79 ! General file type names
80 filetypes.pdf = PDF files
84 AboutDialog.lbl.version = Version
85 ! The texts below provide additional credits for the translation maintainer
86 ! - In AboutDialog.lbl.translation replace "English" with the current language.
87 ! - AboutDialog.lbl.translator is the translator / group name (may be empty)
88 ! - AboutDialog.lbl.translatorWebsite is a URL to the translator / group (may be empty)
89 ! - AboutDialog.lbl.translatorIcon is the file name of an icon under pix/translators/ (may be empty)
90 AboutDialog.lbl.translation = English translation by:
91 AboutDialog.lbl.translator =
92 AboutDialog.lbl.translatorWebsite =
93 AboutDialog.lbl.translatorIcon =
97 PrintDialog.title = Print or export
98 PrintDialog.but.previewAndPrint = Preview & Print
99 PrintDialog.checkbox.showByStage = Show by stage
100 PrintDialog.lbl.selectElements = Select elements to include:
101 printdlg.but.saveaspdf = Save as PDF
102 printdlg.but.preview = Preview
103 printdlg.but.settings = Settings
104 PrintDialog.error.preview.title = Unable to open preview
105 PrintDialog.error.preview.desc1 = Unable to open PDF preview.
106 PrintDialog.error.preview.desc2 = Please use the "Save as PDF" option instead.
109 PrintSettingsDialog.title = Print settings
110 PrintSettingsDialog.lbl.Templatefillcolor = Template fill color:
111 PrintSettingsDialog.lbl.Templatebordercolor = Template border color:
112 PrintSettingsDialog.lbl.Papersize = Paper size:
113 PrintSettingsDialog.lbl.Paperorientation = Paper orientation:
114 PrintSettingsDialog.but.Reset = Reset
115 PrintSettingsDialog.but.Close = Close
119 bugreport.dlg.title = Bug report
120 bugreport.dlg.but.Sendbugreport = Send bug report
121 bugreport.dlg.but.Sendbugreport.Ttip = Automatically send the bug report to the OpenRocket developers.
122 bugreport.dlg.successmsg1 = Bug report successfully sent.
123 bugreport.dlg.successmsg2 = Thank you for helping make OpenRocket better!
124 bugreport.dlg.successmsg3 = Bug report sent
125 bugreport.dlg.connectedInternet = <html>If connected to the Internet, you can simply click <em>Send bug report</em>.
126 bugreport.dlg.otherwise = Otherwise, send the text below to the address:
127 bugreport.lbl.Theinformation = The information above may be included in a public bug report. Make sure it does not contain any sensitive information you do not want to be made public.
128 bugreport.dlg.failedmsg1 = OpenRocket was unable to send the bug report:
129 bugreport.dlg.failedmsg2 = Please send the report manually to
130 bugreport.dlg.failedmsg3 = Error sending report
131 bugreport.reportDialog.txt = <html><b>You can report a bug in OpenRocket by filling in and submitting the form below.</b><br>You can also report bugs and include attachments on the project web site.
132 bugreport.reportDialog.txt2 = <html><b>Please include a short description about what you were doing when the exception occurred.</b>
136 debuglogdlg.but.clear = Clear
137 debuglogdlg.OpenRocketdebuglog = OpenRocket debug log
138 debuglogdlg.Displayloglines = Display log lines:
139 debuglogdlg.Follow = Follow
140 debuglogdlg.col.Time = Time
141 debuglogdlg.col.Level = Level
142 debuglogdlg.col.Location = Location
143 debuglogdlg.col.Message = Message
144 debuglogdlg.lbl.Loglinenbr = Log line number:
145 debuglogdlg.lbl.Time = Time:
146 debuglogdlg.lbl.Level = Level:
147 debuglogdlg.lbl.Location = Location:
148 debuglogdlg.lbl.Logmessage = Log message:
149 debuglogdlg.lbl.Stacktrace = Stack trace:
152 ! Edit Motor configuration dialog
153 edtmotorconfdlg.but.removemotor = Remove motor
154 edtmotorconfdlg.but.Selectmotor = Select motor
155 edtmotorconfdlg.but.Removeconfiguration = Remove configuration
156 edtmotorconfdlg.but.Newconfiguration = New configuration
157 edtmotorconfdlg.lbl.Motormounts = <html><b>Motor mounts:</b>
158 edtmotorconfdlg.title.Editmotorconf = Edit motor configurations
159 edtmotorconfdlg.selectcomp = <html>Select which components function as motor mounts:
160 edtmotorconfdlg.lbl.Motorconfig = <html><b>Motor configurations:</b>
161 edtmotorconfdlg.lbl.Configname = Configuration name:
162 edtmotorconfdlg.lbl.Leavenamedefault = Leave name empty for default.
164 ! Example design dialog
165 exdesigndlg.but.open = Open
166 exdesigndlg.lbl.Selectexample = Select example designs to open:
167 exdesigndlg.lbl.Openexampledesign = Open example design
168 exdesigndlg.lbl.Exampledesignsnotfound = Example designs could not be found.
169 exdesigndlg.lbl.Examplesnotfound = Examples not found
172 ! Material edit panel
173 matedtpan.but.new = New
174 matedtpan.but.edit = Edit
175 matedtpan.but.delete = Delete
176 matedtpan.but.revertall = Revert all
177 matedtpan.col.Material = Material
178 matedtpan.col.Type = Type
179 matedtpan.col.Density = Density
180 matedtpan.col.but.ttip.New = Add a new material
181 matedtpan.title.Addcustmaterial = Add a custom material
182 matedtpan.but.ttip.edit = Edit an existing material
183 matedtpan.title.Editmaterial = Edit material
184 matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
185 matedtpan.but.ttip.delete = Delete a user-defined material
186 matedtpan.but.ttip.revertall = Delete all user-defined materials
187 matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
188 matedtpan.title.Revertall = Revert all?
189 matedtpan.lbl.edtmaterials = <html><i>Editing materials will not affect existing rocket designs.</i>
192 MaterialModel.title.Material = Material
193 MaterialModel.title.Defcustmat = Define custom material
197 pref.dlg.but.add = Add
198 pref.dlg.but.reset = Reset
199 pref.dlg.but.checknow = Check now
200 pref.dlg.but.defaultmetric = Default metric
201 pref.dlg.but.defaultimperial = Default imperial
202 pref.dlg.title.Preferences = Preferences
203 pref.dlg.tab.Units = Units
204 pref.dlg.tab.Defaultunits = Default units
205 pref.dlg.tab.Materials = Materials
206 pref.dlg.tab.Custommaterials = Custom materials
207 pref.dlg.tab.Options = Options
208 pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
209 pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
210 pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
211 pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
212 pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
213 pref.dlg.RASPfiles = RASP motor files (*.eng)
214 pref.dlg.RockSimfiles = RockSim engine files (*.rse)
215 pref.dlg.ZIParchives = ZIP archives (*.zip)
216 pref.dlg.checkbox.Checkupdates = Check for software updates at startup
217 pref.dlg.ttip.Checkupdatesnow = Check for software updates now
218 pref.dlg.lbl.Selectprefunits = Select your preferred units:
219 pref.dlg.lbl.Rocketdimensions = Rocket dimensions:
220 pref.dlg.lbl.Linedensity = Line density:
221 pref.dlg.lbl.Motordimensions = Motor dimensions:
222 pref.dlg.lbl.Surfacedensity = Surface density:
223 pref.dlg.lbl.Distance = Distance:
224 pref.dlg.lbl.Bulkdensity = Bulk density::
225 pref.dlg.lbl.Velocity = Velocity:
226 pref.dlg.lbl.Surfaceroughness = Surface roughness:
227 pref.dlg.lbl.Acceleration = Acceleration:
228 pref.dlg.lbl.Area = Area:
229 pref.dlg.lbl.Mass = Mass:
230 pref.dlg.lbl.Angle = Angle:
231 pref.dlg.lbl.Force = Force:
232 pref.dlg.lbl.Rollrate = Roll rate:
233 pref.dlg.lbl.Totalimpulse = Total impulse:
234 pref.dlg.lbl.Temperature = Temperature:
235 pref.dlg.lbl.Momentofinertia = Moment of inertia:
236 pref.dlg.lbl.Pressure = Pressure:
237 pref.dlg.lbl.Stability = Stability:
238 pref.dlg.lbl.effect1 = The effects will take place the next time you open a window.
239 pref.dlg.lbl.Checkingupdates = Checking for updates...
240 pref.dlg.lbl.msg1 = An error occurred while communicating with the server.
241 pref.dlg.lbl.msg2 = Unable to retrieve update information
242 pref.dlg.lbl.msg3 = You are running the latest version of OpenRocket.
243 pref.dlg.lbl.msg4 = No updates available
244 pref.dlg.PrefChoiseSelector1 = Always ask
245 pref.dlg.PrefChoiseSelector2 = Insert in middle
246 pref.dlg.PrefChoiseSelector3 = Add to end
247 pref.dlg.PrefBooleanSelector1 = Delete
248 pref.dlg.PrefBooleanSelector2 = Confirm
250 pref.dlg.DescriptionArea.Adddirectories = Add directories, RASP motor files (*.eng), RockSim engine files (*.rse) or ZIP archives separated by a semicolon (;) to load external thrust curves. Changes will take effect the next time you start OpenRocket.
253 ! Simulation edit dialog
254 simedtdlg.but.runsimulation = Run simulation
255 simedtdlg.but.resettodefault = Reset to default
256 simedtdlg.but.add = Add
257 simedtdlg.but.remove = Remove
258 simedtdlg.title.Editsim = Edit simulation
259 simedtdlg.lbl.Simname = Simulation name:
260 simedtdlg.tab.Launchcond = Launch conditions
261 simedtdlg.tab.Simopt = Simulation options
262 simedtdlg.tab.Plotdata = Plot data
263 simedtdlg.tab.Exportdata = Export data
264 simedtdlg.lbl.Motorcfg = Motor configuration:
265 simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
266 simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
267 simedtdlg.lbl.Wind = Wind
268 simedtdlg.lbl.Averwindspeed = Average windspeed:
269 simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
270 simedtdlg.lbl.Stddeviation = Standard deviation:
271 simedtdlg.lbl.ttip.Stddeviation = <html>The standard deviation of the windspeed.<br>The windspeed is within twice the standard deviation from the average for 95% of the time.
272 simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
273 simedtdlg.lbl.ttip.Turbulenceintensity1 = <html>The turbulence intensity is the standard deviation divided by the average windspeed.<br>
274 simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
275 simedtdlg.lbl.ttip.Turbulenceintensity3 = to
276 simedtdlg.border.Atmoscond = Atmospheric conditions
277 simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
278 simedtdlg.checkbox.ttip.InterStdAtmosphere1 = <html>Select to use the International Standard Atmosphere model.<br>This model has a temperature of
279 simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
280 simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
281 simedtdlg.lbl.Temperature = Temperature:
282 simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
283 simedtdlg.lbl.Pressure = Pressure:
284 simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
285 simedtdlg.lbl.Launchsite = Launch site
286 simedtdlg.lbl.Latitude = Latitude:
287 simedtdlg.lbl.ttip.Latitude = <html>The launch site latitude affects the gravitational pull of Earth.<br>Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
288 simedtdlg.lbl.Altitude = Altitude:
289 simedtdlg.lbl.ttip.Altitude = <html>The launch altitude above mean sea level.<br>This affects the position of the rocket in the atmospheric model.
290 simedtdlg.border.Launchrod = Launch rod
291 simedtdlg.lbl.Length = Length:
292 simedtdlg.lbl.ttip.Length = The length of the launch rod.
293 simedtdlg.lbl.Angle = Angle:
294 simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
295 simedtdlg.lbl.Direction = Direction:
296 simedtdlg.lbl.ttip.Direction1 = <html>Direction of the launch rod relative to the wind.<br>
297 simedtdlg.lbl.ttip.Direction2 = = towards the wind,
298 simedtdlg.lbl.ttip.Direction3 = = downwind.
299 simedtdlg.border.Simopt = Simulator options
300 simedtdlg.lbl.Calcmethod = Calculation method:
301 simedtdlg.lbl.ttip.Calcmethod = <html>The Extended Barrowman method calculates aerodynamic forces according <br>to the Barrowman equations extended to accommodate more components.
302 simedtdlg.lbl.ExtBarrowman = Extended Barrowman
303 simedtdlg.lbl.Simmethod = Simulation method:
304 simedtdlg.lbl.ttip.Simmethod1 = <html>The six degree-of-freedom simulator allows the rocket total freedom during flight.<br>
305 simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4<sup>th</sup> order Runge-Kutta 4 numerical integration.
306 simedtdlg.lbl.Timestep = Time step:
307 simedtdlg.lbl.ttip.Timestep1 = <html>The time between simulation steps.<br>A smaller time step results in a more accurate but slower simulation.<br>
308 simedtdlg.lbl.ttip.Timestep2 = The 4<sup>th</sup> order simulation method is quite accurate with a time step of
309 simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
310 simedtdlg.border.Simlist = Simulator listeners
311 simedtdlg.txt.longA1 = <html><i>Simulation listeners</i> is an advanced feature that allows user-written code to listen to and interact with the simulation.
312 simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
313 simedtdlg.lbl.Curlist = Current listeners:
314 simedtdlg.lbl.Addsimlist = Add simulation listener
315 simedtdlg.lbl.Noflightdata = No flight data available.
316 simedtdlg.lbl.runsimfirst = Please run the simulation first.
317 simedtdlg.chart.Simflight = Simulated flight
318 simedtdlg.dlg.Simres = Simulation results
319 simedtdlg.IntensityDesc.None = None
320 simedtdlg.IntensityDesc.Verylow = Very low
321 simedtdlg.IntensityDesc.Low = Low
322 simedtdlg.IntensityDesc.Medium = Medium
323 simedtdlg.IntensityDesc.High = High
324 simedtdlg.IntensityDesc.Veryhigh = Very high
325 simedtdlg.IntensityDesc.Extreme = Extreme
330 simpanel.but.newsimulation = New simulation
331 simpanel.but.editsimulation = Edit simulation
332 simpanel.but.runsimulations = Run simulations
333 simpanel.but.deletesimulations = Delete simulations
334 simpanel.but.plotexport = Plot / export
335 simpanel.but.ttip.newsimulation = Add a new simulation
336 simpanel.but.ttip.editsim = Edit the selected simulation
337 simpanel.but.ttip.runsimu = Re-run the selected simulations
338 simpanel.but.ttip.deletesim = Delete the selected simulations
339 simpanel.checkbox.donotask = Do not ask me again
340 simpanel.lbl.defpref = You can change the default operation in the preferences.
341 simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
342 simpanel.dlg.lbl.DeleteSim2 = <html><i>This operation cannot be undone.</i>
343 simpanel.dlg.lbl.DeleteSim3 = Delete simulations
344 simpanel.col.Name = Name
345 simpanel.col.Motors = Motors
346 simpanel.col.Apogee = Apogee
347 simpanel.col.Maxvelocity = Max. velocity
348 simpanel.col.Maxacceleration = Max. acceleration
349 simpanel.col.Timetoapogee = Time to apogee
350 simpanel.col.Flighttime = Flight time
351 simpanel.col.Groundhitvelocity = Ground hit velocity
353 ! SimulationRunDialog
354 SimuRunDlg.title.RunSim = Running simulations...
355 SimuRunDlg.lbl.Running = Running ...
356 SimuRunDlg.lbl.Simutime = Simulation time:
357 SimuRunDlg.lbl.Altitude = Altitude:
358 SimuRunDlg.lbl.Velocity = Velocity:
359 SimuRunDlg.msg.Unabletosim = Unable to simulate:
360 SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
361 SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
362 SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
363 SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
364 SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
365 SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
366 SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
370 ! SimulationExportPanel
371 SimExpPan.desc = Comma Separated Files (*.csv)
372 SimExpPan.border.Vartoexport = Variables to export
373 SimExpPan.but.Selectall = Select all
374 SimExpPan.but.Selectnone = Select none
375 SimExpPan.border.Fieldsep = Field separator
376 SimExpPan.lbl.Fieldsepstr = Field separator string:
377 SimExpPan.lbl.longA1 = <html>The string used to separate the fields in the exported file.<br>
378 SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
379 SimExpPan.checkbox.Includesimudesc = Include simulation description
380 SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
381 SimExpPan.border.Comments = Comments
382 SimExpPan.checkbox.Includefielddesc = Include field descriptions
383 SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
384 SimExpPan.checkbox.Incflightevents = Include flight events
385 SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
386 SimExpPan.lbl.Commentchar = Comment character:
387 SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
388 SimExpPan.but.Exporttofile = Export to file...
389 SimExpPan.Fileexists.desc1 = File \"
390 SimExpPan.Fileexists.desc2 = \" exists. Overwrite?
391 SimExpPan.Fileexists.title = File exists
392 SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of
393 SimExpPan.ExportingVar.desc2 = Exporting
394 SimExpPan.ExportingVar.desc3 = variables out of
395 SimExpPan.Col.Variable = Variable
396 SimExpPan.Col.Unit = Unit
399 MotorPlot.title.Motorplot = Motor plot
400 MotorPlot.but.Select = Select
401 MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
402 MotorPlot.Chart.Time = Time / s
403 MotorPlot.Chart.Thrust = Thrust / N
404 MotorPlot.txt.Designation = Designation:
405 MotorPlot.txt.Manufacturer = Manufacturer:
406 MotorPlot.txt.Type = Type:
407 MotorPlot.txt.Delays = Delays:
408 MotorPlot.txt.Comment = Comment:\n
412 ! Simulation plot panel
413 simplotpanel.lbl.Presetplotconf = Preset plot configurations:
414 simplotpanel.lbl.Xaxistype = X axis type:
415 simplotpanel.lbl.Unit = Unit:
416 simplotpanel.lbl.Yaxistypes = Y axis types:
417 simplotpanel.lbl.Flightevents = Flight events:
418 simplotpanel.but.All = All
419 simplotpanel.but.None = None
420 simplotpanel.but.NewYaxisplottype = New Y axis plot type
421 simplotpanel.but.Plotflight = Plot flight
422 simplotpanel.lbl.Axis = Axis:
423 simplotpanel.but.ttip.Removethisplot = Remove this plot
424 simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
425 simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
426 simplotpanel.OptionPane.lbl2 = Cannot add plot
427 simplotpanel.AUTO_NAME = Auto
428 simplotpanel.LEFT_NAME = Left
429 simplotpanel.RIGHT_NAME = Right
430 simplotpanel.CUSTOM = Custom
432 ! Component add buttons
433 compaddbuttons.Bodycompandfinsets = Body components and fin sets
434 compaddbuttons.Nosecone = Nose cone
435 compaddbuttons.Bodytube = Body tube
436 compaddbuttons.Transition = Transition
437 compaddbuttons.Trapezoidal = Trapezoidal
438 compaddbuttons.Elliptical = Elliptical
439 compaddbuttons.Freeform = Freeform
440 compaddbuttons.Launchlug = Launch lug
441 compaddbuttons.Innercomponent = Inner component
442 compaddbuttons.Innertube = Inner tube
443 compaddbuttons.Coupler = Coupler
444 compaddbuttons.Centeringring = Centering\nring
445 compaddbuttons.Bulkhead = Bulkhead
446 compaddbuttons.Engineblock = Engine\nblock
447 compaddbuttons.Massobjects = Mass objects
448 compaddbuttons.Parachute = Parachute
449 compaddbuttons.Streamer = Streamer
450 compaddbuttons.Shockcord = Shock cord
451 compaddbuttons.Masscomponent = Mass\ncomponent
452 compaddbuttons.Donotaskmeagain = Do not ask me again
453 compaddbuttons.Selectcomppos = Select component position
454 compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
455 compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
456 compaddbuttons.askPosition.Inserthere = Insert here
457 compaddbuttons.askPosition.Addtotheend = Add to the end
458 compaddbuttons.askPosition.Cancel = Cancel
460 ! Component Analysis Dialog
461 componentanalysisdlg.componentanalysis = Component analysis
462 componentanalysisdlg.lbl.winddir = Wind direction:
463 componentanalysisdlg.TitledBorder.warnings = Warnings:
464 componentanalysisdlg.ToggleBut.worst = Worst
465 componentanalysisdlg.lbl.angleofattack = Angle of attack:
466 componentanalysisdlg.lbl.machnumber = Mach number:
467 componentanalysisdlg.lbl.rollrate = Roll rate:
468 componentanalysisdlg.lbl.activestages = Active stages:
469 componentanalysisdlg.lbl.motorconf = Motor configuration:
470 componentanalysisdlg.TabStability.Col = Component
471 componentanalysisdlg.TabStability = Stability
472 componentanalysisdlg.TabStability.ttip = Stability information
473 componentanalysisdlg.dragTableModel.Col.Component = Component
474 componentanalysisdlg.dragTableModel.Col.Pressure = <html>Pressure C<sub>D</sub>
475 componentanalysisdlg.dragTableModel.Col.Base = <html>Base C<sub>D</sub>
476 componentanalysisdlg.dragTableModel.Col.friction = <html>Friction C<sub>D</sub>
477 componentanalysisdlg.dragTableModel.Col.total = <html>Total C<sub>D</sub>
478 componentanalysisdlg.dragTabchar = Drag characteristics
479 componentanalysisdlg.dragTabchar.ttip = Drag characteristics
480 componentanalysisdlg.rollTableModel.Col.component = Component
481 componentanalysisdlg.rollTableModel.Col.rollforc = Roll forcing coefficient
482 componentanalysisdlg.rollTableModel.Col.rolldamp = Roll damping coefficient
483 componentanalysisdlg.rollTableModel.Col.total = <html>Total C<sub>l</sub>
484 componentanalysisdlg.rollTableModel = Roll dynamics
485 componentanalysisdlg.rollTableModel.ttip = Roll dynamics
486 componentanalysisdlg.println.closingmethod = Closing method called:
487 componentanalysisdlg.println.settingnam = SETTING NAN VALUES
488 componentanalysisdlg.lbl.reflenght = Reference length:
489 componentanalysisdlg.lbl.refarea = Reference area:
490 !componentanalysisdlg.But.close =Close
491 componentanalysisdlg.TabStability.Col.Component = Component
493 ! Custom Material dialog
494 custmatdlg.title.Custommaterial = Custom material
495 custmatdlg.lbl.Materialname = Material name:
496 custmatdlg.lbl.Materialtype = Material type:
497 custmatdlg.lbl.Materialdensity = Material density:
498 custmatdlg.checkbox.Addmaterial = Add material to database
501 ! Ring Component Config
502 ringcompcfg.OuterRadius = OuterRadius
503 ringcompcfg.Automatic = Automatic
504 ringcompcfg.InnerRadius = InnerRadius
505 ringcompcfg.Thickness = Thickness
506 ringcompcfg.Length = Length
507 ringcompcfg.Positionrelativeto = Position relative to:
508 ringcompcfg.plus = plus
509 ringcompcfg.PositionValue = PositionValue
510 ringcompcfg.Radialdistance = Radial distance:
511 ringcompcfg.Distancefrom = Distance from the rocket centerline
512 ringcompcfg.Radialdirection = Radial direction:
513 ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
514 ringcompcfg.but.Reset = Reset
515 ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
516 ringcompcfg.EngineBlock.desc = <html>An <b>engine block</b> stops the motor from moving forwards in the motor mount tube.<br><br>In order to add a motor, create a <b>body tube</b> or <b>inner tube</b> and mark it as a motor mount in the <em>Motor</em> tab.
517 ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube.
521 BodyTubecfg.lbl.Bodytubelength = Body tube length:
522 BodyTubecfg.lbl.Outerdiameter = Outer diameter:
523 BodyTubecfg.lbl.Innerdiameter = Inner diameter:
524 BodyTubecfg.lbl.Wallthickness = Wall thickness:
525 BodyTubecfg.tab.General = General
526 BodyTubecfg.tab.Generalproperties = General properties
527 BodyTubecfg.tab.Motor = Motor
528 BodyTubecfg.tab.Motormountconf = Motor mount configuration
529 BodyTubecfg.checkbox.Automatic = Automatic
530 BodyTubecfg.checkbox.Filled = Filled
533 FinSetConfig.tab.Fintabs = Fin tabs
534 FinSetConfig.tab.Through-the-wall = Through-the-wall fin tabs
535 FinSetConfig.but.Converttofreeform = Convert to freeform
536 FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
537 FinSetConfig.Convertfinset = Convert fin set
538 FinSetConfig.but.Splitfins = Split fins
539 FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
540 FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
541 FinSetConfig.lbl.Tablength = Tab length:
542 FinSetConfig.ttip.Tablength = The length of the fin tab.
543 FinSetConfig.lbl.Tabheight = Tab height:
544 FinSetConfig.ttip.Tabheight = The spanwise height of the fin tab.
545 FinSetConfig.lbl.Tabposition = Tab position:
546 FinSetConfig.ttip.Tabposition = The position of the fin tab.
547 FinSetConfig.lbl.relativeto = relative to
549 ! MotorDatabaseLoadingDialog
550 MotorDbLoadDlg.title = Loading motors
551 MotorDbLoadDlg.Loadingmotors = Loading motors...
554 RocketCfg.lbl.Designname = Design name:
555 RocketCfg.lbl.Designer = Designer:
556 RocketCfg.lbl.Comments = Comments:
557 RocketCfg.lbl.Revisionhistory = Revision history:
558 RocketCfg.lbl.Material = Material:
561 ShockCordCfg.lbl.Shockcordlength = Shock cord length:
563 ! RocketComponentConfig
564 RocketCompCfg.lbl.Componentname = Component name:
565 RocketCompCfg.ttip.Thecomponentname = The component name.
566 RocketCompCfg.tab.Override = Override
567 RocketCompCfg.tab.MassandCGoverride = Mass and CG override options
568 RocketCompCfg.tab.Figure = Figure
569 RocketCompCfg.tab.Figstyleopt = Figure style options
570 RocketCompCfg.tab.Comment = Comment
571 RocketCompCfg.tab.Specifyacomment = Specify a comment for the component
572 RocketCompCfg.lbl.Mass = Mass:
573 RocketCompCfg.lbl.Componentmass = Component mass:
574 RocketCompCfg.lbl.overriddento = (overridden to
575 RocketCompCfg.lbl.overriddenby = (overridden by
576 RocketCompCfg.lbl.Componentmaterial = Component material:
577 RocketCompCfg.lbl.Componentfinish = Component finish:
578 RocketCompCfg.lbl.ttip.componentmaterialaffects = The component material affects the weight of the component.
579 RocketCompCfg.combo.ttip.componentmaterialaffects = The component material affects the weight of the component.
580 RocketCompCfg.lbl.longA1 = <html>The component finish affects the aerodynamic drag of the component.<br>
581 RocketCompCfg.lbl.longA2 = The value indicated is the average roughness height of the surface.
582 RocketCompCfg.but.Setforall = Set for all
583 RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
584 RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
585 RocketCompCfg.checkbox.Overridemass = Override mass:
586 RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
587 RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
588 RocketCompCfg.lbl.longB1 = <html>The overridden mass does not include motors.<br>
589 RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
590 RocketCompCfg.lbl.Commentsonthe = Comments on the
591 RocketCompCfg.lbl.Figurestyle = Figure style:
592 RocketCompCfg.lbl.Componentcolor = Component color:
593 RocketCompCfg.lbl.Choosecolor = Choose color
594 RocketCompCfg.checkbox.Usedefaultcolor = Use default color
595 RocketCompCfg.lbl.Complinestyle = Component line style:
596 RocketCompCfg.but.Saveasdefstyle = Save as default style
597 RocketCompCfg.lbl.Diameter = Diameter:
598 RocketCompCfg.lbl.Length = Length:
599 RocketCompCfg.lbl.Thickness = Thickness:
600 RocketCompCfg.checkbox.Endcapped = End capped
601 RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
602 RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
603 RocketCompCfg.title.Aftshoulder = Aft shoulder
604 RocketCompCfg.border.Foreshoulder = Fore shoulder
605 !RocketCompCfg.lbl.Length = Length:
608 BulkheadCfg.tab.Radius = Radius:
609 BulkheadCfg.tab.Thickness = Thickness:
610 BulkheadCfg.tab.General = General
611 BulkheadCfg.tab.Generalproperties = General properties
614 CenteringRingCfg.tab.Outerdiam = Outer diameter:
615 CenteringRingCfg.tab.Innerdiam = Inner diameter:
616 CenteringRingCfg.tab.Thickness = Thickness:
617 CenteringRingCfg.tab.General = General
618 CenteringRingCfg.tab.Generalproperties = General properties
620 !ComponentConfigDialog
621 ComponentCfgDlg.configuration = configuration
622 ComponentCfgDlg.configuration1 =
623 ComponentCfgDlg.Modify = Modify
625 !EllipticalFinSetConfig
626 EllipticalFinSetCfg.Nbroffins = Number of fins:
627 EllipticalFinSetCfg.Rotation = Rotation:
628 EllipticalFinSetCfg.Fincant = Fin cant:
629 EllipticalFinSetCfg.Rootchord = Root chord:
630 EllipticalFinSetCfg.Height = Height:
631 EllipticalFinSetCfg.Positionrelativeto = Position relative to:
632 EllipticalFinSetCfg.plus = plus
633 EllipticalFinSetCfg.FincrossSection = Fin cross section:
634 EllipticalFinSetCfg.Thickness = Thickness:
635 EllipticalFinSetCfg.General = General
636 EllipticalFinSetCfg.Generalproperties = General properties
637 EllipticalFinSetCfg.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
639 !FreeformFinSetConfig
640 FreeformFinSetCfg.tab.General = General
641 FreeformFinSetCfg.tab.ttip.General = General properties
642 FreeformFinSetCfg.tab.Shape = Shape
643 FreeformFinSetCfg.tab.ttip.Finshape = Fin shape
644 FreeformFinSetCfg.lbl.Numberoffins = Number of fins:
645 FreeformFinSetCfg.lbl.Finrotation = Fin rotation:
646 FreeformFinSetCfg.lbl.Fincant = Fin cant:
647 FreeformFinSetCfg.lbl.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
648 FreeformFinSetCfg.lbl.Posrelativeto = Position relative to:
649 FreeformFinSetCfg.lbl.plus = plus
650 FreeformFinSetCfg.lbl.FincrossSection = Fin cross section:
651 FreeformFinSetCfg.lbl.Thickness = Thickness:
652 ! doubleClick1 + 2 form the message "Double-click to edit", split approximately at the middle
653 FreeformFinSetConfig.lbl.doubleClick1 = Double-click
654 FreeformFinSetConfig.lbl.doubleClick2 = to edit
655 FreeformFinSetConfig.lbl.clickDrag = Click+drag: Add and move points
656 FreeformFinSetConfig.lbl.ctrlClick = Ctrl+click: Remove point
660 InnerTubeCfg.tab.Motor = Motor
661 InnerTubeCfg.tab.ttip.Motor = Motor mount configuration
662 InnerTubeCfg.tab.Cluster = Cluster
663 InnerTubeCfg.tab.ttip.Cluster = Cluster configuration
664 InnerTubeCfg.tab.Radialpos = Radial position
665 InnerTubeCfg.tab.ttip.Radialpos = Radial position
666 InnerTubeCfg.lbl.Selectclustercfg = Select cluster configuration:
667 InnerTubeCfg.lbl.TubeSep = Tube separation:
668 InnerTubeCfg.lbl.ttip.TubeSep = The separation of the tubes, 1.0 = touching each other
669 InnerTubeCfg.lbl.Rotation = Rotation:
670 InnerTubeCfg.lbl.ttip.Rotation = Rotation angle of the cluster configuration
671 InnerTubeCfg.lbl.Rotangle = Rotation angle of the cluster configuration
672 InnerTubeCfg.but.Splitcluster = Split cluster
673 InnerTubeCfg.lbl.longA1 = <html>Split the cluster into separate components.<br>
674 InnerTubeCfg.lbl.longA2 = This also duplicates all components attached to this inner tube.
675 InnerTubeCfg.but.Resetsettings = Reset settings
676 InnerTubeCfg.but.ttip.Resetsettings = Reset the separation and rotation to the default values
679 LaunchLugCfg.lbl.Length = Length:
680 LaunchLugCfg.lbl.Outerdiam = Outer diameter:
681 LaunchLugCfg.lbl.Innerdiam = Inner diameter:
682 LaunchLugCfg.lbl.Thickness = Thickness:
683 LaunchLugCfg.lbl.Radialpos = Radial position:
684 LaunchLugCfg.lbl.Posrelativeto = Position relative to:
685 LaunchLugCfg.lbl.plus = plus
686 LaunchLugCfg.tab.General = General
687 LaunchLugCfg.tab.Generalprop = General properties
689 ! MassComponentConfig
690 MassComponentCfg.lbl.Mass = Mass:
691 MassComponentCfg.lbl.Length = Length:
692 MassComponentCfg.lbl.Diameter = Diameter:
693 MassComponentCfg.lbl.PosRelativeto = Position relative to:
694 MassComponentCfg.lbl.plus = plus
695 MassComponentCfg.tab.General = General
696 MassComponentCfg.tab.ttip.General = General properties
697 MassComponentCfg.tab.Radialpos = Radial position
698 MassComponentCfg.tab.ttip.Radialpos = Radial position configuration
699 MassComponentCfg.lbl.Radialdistance = Radial distance:
700 MassComponentCfg.lbl.Radialdirection = Radial direction:
701 MassComponentCfg.but.Reset = Reset
704 MotorCfg.checkbox.compmotormount = This component is a motor mount
705 MotorCfg.lbl.Motorcfg = Motor configuration:
706 MotorCfg.but.New = New
707 MotorCfg.lbl.Currentmotor = Current motor:
708 MotorCfg.lbl.Motoroverhang = Motor overhang:
709 MotorCfg.lbl.Ignitionat = Ignition at:
710 MotorCfg.lbl.plus = plus
711 MotorCfg.lbl.seconds = seconds
712 MotorCfg.lbl.longA1 = The current design has only one stage.
713 MotorCfg.lbl.longA2 = Stages can be added by clicking \"New stage\".
714 MotorCfg.lbl.longB1 = The current design has
715 MotorCfg.lbl.longB2 = stages.
716 MotorCfg.but.Selectmotor = Select motor
717 MotorCfg.but.Removemotor = Remove motor
718 MotorCfg.lbl.motorLabel = None
721 NoseConeCfg.lbl.Noseconeshape = Nose cone shape:
722 NoseConeCfg.lbl.Shapeparam = Shape parameter:
723 NoseConeCfg.lbl.Noseconelength = Nose cone length:
724 NoseConeCfg.lbl.Basediam = Base diameter:
725 NoseConeCfg.checkbox.Automatic = Automatic
726 NoseConeCfg.lbl.Wallthickness = Wall thickness:
727 NoseConeCfg.checkbox.Filled = Filled
728 NoseConeCfg.tab.General = General
729 NoseConeCfg.tab.ttip.General = General properties
730 NoseConeCfg.tab.Shoulder = Shoulder
731 NoseConeCfg.tab.ttip.Shoulder = Shoulder properties
734 ParachuteCfg.lbl.Canopy = Canopy:
735 ParachuteCfg.lbl.Diameter = Diameter:
736 ParachuteCfg.lbl.Material = Material:
737 ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
738 ParachuteCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
739 ParachuteCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the parachute.<br>
740 ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
741 ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
742 ParachuteCfg.but.Reset = Reset
743 ParachuteCfg.lbl.Shroudlines = Shroud lines:
744 ParachuteCfg.lbl.Numberoflines = Number of lines:
745 ParachuteCfg.lbl.Linelength = Line length:
746 ParachuteCfg.lbl.Material = Material:
747 ParachuteCfg.lbl.Posrelativeto = Position relative to:
748 ParachuteCfg.lbl.plus = plus
749 ParachuteCfg.lbl.Packedlength = Packed length:
750 ParachuteCfg.lbl.Packeddiam = Packed diameter:
751 ParachuteCfg.lbl.Deploysat = Deploys at:
752 ParachuteCfg.lbl.seconds = seconds
753 ParachuteCfg.lbl.Altitude = Altitude:
754 ParachuteCfg.tab.General = General
755 ParachuteCfg.tab.ttip.General = General properties
756 ParachuteCfg.tab.Radialpos = Radial position
757 ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
758 ParachuteCfg.lbl.Radialdistance = Radial distance:
759 ParachuteCfg.lbl.Radialdirection = Radial direction:
760 ParachuteCfg.but.Reset = Reset
761 ParachuteCfg.lbl.plusdelay = plus
764 ShockCordCfg.lbl.Shockcordlength = Shock cord length
765 ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
766 ShockCordCfg.lbl.Posrelativeto = Position relative to:
767 ShockCordCfg.lbl.plus = plus
768 ShockCordCfg.lbl.Packedlength = Packed length:
769 ShockCordCfg.lbl.Packeddiam = Packed diameter:
770 ShockCordCfg.tab.General = General
771 ShockCordCfg.tab.ttip.General = General properties
774 SleeveCfg.tab.Outerdiam = Outer diameter:
775 SleeveCfg.tab.Innerdiam = Inner diameter:
776 SleeveCfg.tab.Wallthickness = Wall thickness:
777 SleeveCfg.tab.Length = Length:
778 SleeveCfg.tab.General = General
779 SleeveCfg.tab.Generalproperties = General properties
782 StreamerCfg.lbl.Striplength = Strip length:
783 StreamerCfg.lbl.Stripwidth = Strip width:
784 StreamerCfg.lbl.Striparea = Strip area:
785 StreamerCfg.lbl.Aspectratio = Aspect ratio:
786 StreamerCfg.lbl.Material = Material:
787 StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight of the component.
788 StreamerCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
789 StreamerCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the streamer.<br>
790 StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
791 StreamerCfg.lbl.Automatic = Automatic
792 StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
793 StreamerCfg.lbl.Posrelativeto = Position relative to:
794 StreamerCfg.lbl.plus = plus
795 StreamerCfg.lbl.Packedlength = Packed length:
796 StreamerCfg.lbl.Packeddiam = Packed diameter:
797 StreamerCfg.lbl.Deploysat = Deploys at:
798 StreamerCfg.lbl.seconds = seconds
799 StreamerCfg.lbl.Altitude = Altitude:
800 StreamerCfg.tab.General = General
801 StreamerCfg.tab.ttip.General = General properties
802 StreamerCfg.tab.Radialpos = Radial position
803 StreamerCfg.tab.ttip.Radialpos = Radial position configuration
804 StreamerCfg.lbl.Radialdistance = Radial distance:
805 StreamerCfg.lbl.Radialdirection = Radial direction:
806 StreamerCfg.but.Reset = Reset
807 StreamerCfg.lbl.plusdelay = plus
809 ! ThicknessRingComponentConfig
810 ThicknessRingCompCfg.tab.Outerdiam = Outer diameter:
811 ThicknessRingCompCfg.tab.Innerdiam = Inner diameter:
812 ThicknessRingCompCfg.tab.Wallthickness = Wall thickness:
813 ThicknessRingCompCfg.tab.Length = Length:
814 ThicknessRingCompCfg.tab.General = General
815 ThicknessRingCompCfg.tab.Generalprop = General properties
818 TransitionCfg.lbl.Transitionshape = Transition shape:
819 TransitionCfg.checkbox.Clipped = Clipped
820 TransitionCfg.lbl.Shapeparam = Shape parameter:
821 TransitionCfg.lbl.Transitionlength = Transition length:
822 TransitionCfg.lbl.Forediam = Fore diameter:
823 TransitionCfg.checkbox.Automatic = Automatic
824 TransitionCfg.lbl.Aftdiam = Aft diameter:
825 TransitionCfg.lbl.Wallthickness = Wall thickness:
826 TransitionCfg.checkbox.Filled = Filled
827 TransitionCfg.tab.General = General
828 TransitionCfg.tab.Generalproperties = General properties
829 TransitionCfg.tab.Shoulder = Shoulder
830 TransitionCfg.tab.Shoulderproperties = Shoulder properties
832 ! TrapezoidFinSetConfig
833 TrapezoidFinSetCfg.lbl.Nbroffins = Number of fins:
834 TrapezoidFinSetCfg.lbl.ttip.Nbroffins = The number of fins in the fin set.
835 TrapezoidFinSetCfg.lbl.Finrotation = Fin rotation:
836 TrapezoidFinSetCfg.lbl.ttip.Finrotation = The angle of the first fin in the fin set.
837 TrapezoidFinSetCfg.lbl.Fincant = Fin cant:
838 TrapezoidFinSetCfg.lbl.ttip.Fincant =The angle that the fins are canted with respect to the rocket body.
839 TrapezoidFinSetCfg.lbl.Rootchord = Root chord:
840 TrapezoidFinSetCfg.lbl.Tipchord = Tip chord:
841 TrapezoidFinSetCfg.lbl.Height = Height:
842 TrapezoidFinSetCfg.lbl.Sweeplength = Sweep length:
843 TrapezoidFinSetCfg.lbl.Sweepangle = Sweep angle:
844 TrapezoidFinSetCfg.lbl.FincrossSection = Fin cross section:
845 TrapezoidFinSetCfg.lbl.Thickness = Thickness:
846 TrapezoidFinSetCfg.lbl.Posrelativeto = Position relative to:
847 TrapezoidFinSetCfg.lbl.plus = plus
848 TrapezoidFinSetCfg.tab.General = General
849 TrapezoidFinSetCfg.tab.Generalproperties = General properties
851 !MotorConfigurationModel
852 MotorCfgModel.Editcfg = Edit configurations
854 ! StorageOptionChooser
855 StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
856 StorageOptChooser.rdbut.Allsimdata = All simulated data
857 StorageOptChooser.lbl.longA1 = <html>Store all simulated data.<br>
858 StorageOptChooser.lbl.longA2 = This can result in very large files!
859 StorageOptChooser.rdbut.Every = Every
860 StorageOptChooser.lbl.longB1 = <html>Store plottable values approximately this far apart.<br>
861 StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
862 StorageOptChooser.lbl.seconds = seconds
863 StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
864 StorageOptChooser.lbl.longC1 = <html>Store only the values shown in the summary table.<br>
865 StorageOptChooser.lbl.longC2 = This results in the smallest files.
866 StorageOptChooser.checkbox.Compfile = Compress file
867 StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
868 StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
869 StorageOptChooser.ttip.Saveopt = Save options
870 StorageOptChooser.lbl.Estfilesize = Estimated file size:
871 StorageOptChooser.lbl.Saveopt = Save options
873 ! ThrustCurveMotorSelectionPanel
874 TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
875 TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
876 TCMotorSelPan.SHOW_DESCRIPTIONS.desc1 = Show all motors
877 TCMotorSelPan.SHOW_DESCRIPTIONS.desc2 = Show motors with diameter less than that of the motor mount
878 TCMotorSelPan.SHOW_DESCRIPTIONS.desc3 = Show motors with diameter equal to that of the motor mount
879 TCMotorSelPan.lbl.Motormountdia = Motor mount diameter:
880 TCMotorSelPan.lbl.Search = Search:
881 TCMotorSelPan.lbl.Selectthrustcurve = Select thrust curve:
882 TCMotorSelPan.lbl.Ejectionchargedelay = Ejection charge delay:
883 TCMotorSelPan.equalsIgnoreCase.None = None
884 TCMotorSelPan.lbl.NumberofsecondsorNone = (Number of seconds or \"None\")
885 TCMotorSelPan.lbl.Totalimpulse = Total impulse:
886 TCMotorSelPan.lbl.Avgthrust = Avg. thrust:
887 TCMotorSelPan.lbl.Maxthrust = Max. thrust:
888 TCMotorSelPan.lbl.Burntime = Burn time:
889 TCMotorSelPan.lbl.Launchmass = Launch mass:
890 TCMotorSelPan.lbl.Emptymass = Empty mass:
891 TCMotorSelPan.lbl.Datapoints = Data points:
892 TCMotorSelPan.lbl.Digest = Digest:
893 TCMotorSelPan.title.Thrustcurve = Thrust curve:
894 TCMotorSelPan.title.Thrust = Thrust
895 TCMotorSelPan.delayBox.None = None
899 PlotDialog.title.Flightdataplot = Flight data plot
900 PlotDialog.Chart.Simulatedflight = Simulated flight
901 PlotDialog.CheckBox.Showdatapoints = Show data points
902 PlotDialog.lbl.Chart = Click+drag down+right to zoom in, up+left to zoom out
905 ! "main" prefix is used for the main application dialog
907 # FIXME: Rename the description keys
909 main.menu.file = File
910 main.menu.file.desc = File-handling related tasks
911 main.menu.file.new = New
912 main.menu.file.new.desc = Create a new rocket design
913 main.menu.file.open = Open...
914 BasicFrame.item.Openrocketdesign = Open a rocket design
915 main.menu.file.openExample = Open example...
916 BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
917 main.menu.file.save = Save
918 BasicFrame.item.SavecurRocketdesign = Save the current rocket design
919 main.menu.file.saveAs = Save as...
920 BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
921 main.menu.file.print = Print / Export PDF...
922 main.menu.file.print.desc = Print or save as PDF the parts list and fin templates
923 main.menu.file.close = Close
924 BasicFrame.item.Closedesign = Close the current rocket design
925 main.menu.file.quit = Quit
926 BasicFrame.item.Quitprogram = Quit the program
928 main.menu.edit = Edit
929 BasicFrame.menu.Rocketedt = Rocket editing
930 main.menu.edit.undo = Undo
931 main.menu.edit.undo.desc = Undo the previous operation
932 main.menu.edit.redo = Redo
933 main.menu.edit.redo.desc = Redo the previously undone operation
934 main.menu.edit.cut = Cut
935 main.menu.edit.copy = Copy
936 main.menu.edit.paste = Paste
937 main.menu.edit.delete = Delete
938 main.menu.edit.resize = Scale...
939 main.menu.edit.resize.desc = Scale parts of the rocket design
940 main.menu.edit.preferences = Preferences
941 main.menu.edit.preferences.desc = Setup the application preferences
943 main.menu.analyze = Analyze
944 main.menu.analyze.desc = Rocket analysis
945 main.menu.analyze.componentAnalysis = Component analysis
946 main.menu.analyze.componentAnalysis.desc = Analyze the rocket components separately
948 main.menu.help = Help
949 main.menu.help.desc = Information about OpenRocket
950 main.menu.help.license = License
951 main.menu.help.license.desc = OpenRocket license information
952 main.menu.help.bugReport = Bug report
953 main.menu.help.bugReport.desc = Information about reporting bugs in OpenRocket
954 main.menu.help.debugLog = Debug log
955 main.menu.help.debugLog.desc = View the OpenRocket debug log
956 main.menu.help.about = About
957 main.menu.help.about.desc = Copyright details about OpenRocket
959 main.menu.debug = Debug
960 main.menu.debug.whatisthismenu = What is this menu?
961 main.menu.debug.createtestrocket = Create test rocket
964 ! Translate here all material database
969 Databases.materials.Acrylic = Acrylic
970 Databases.materials.Balsa = Balsa
971 Databases.materials.Birch = Birch
972 Databases.materials.Cardboard = Cardboard
973 Databases.materials.Carbonfiber = Carbon fiber
974 Databases.materials.Cork = Cork
975 Databases.materials.DepronXPS = Depron (XPS)
976 Databases.materials.Fiberglass = Fiberglass
977 Databases.materials.Kraftphenolic = Kraft phenolic
978 Databases.materials.Maple = Maple
979 Databases.materials.Paperoffice = Paper (office)
980 Databases.materials.Pine = Pine
981 Databases.materials.Plywoodbirch = Plywood (birch)
982 Databases.materials.PolycarbonateLexan = Polycarbonate (Lexan)
983 Databases.materials.Polystyrene = Polystyrene
984 Databases.materials.PVC = PVC
985 Databases.materials.Spruce = Spruce
986 Databases.materials.StyrofoamgenericEPS = Styrofoam (generic EPS)
987 Databases.materials.StyrofoamBluefoamXPS = Styrofoam \"Blue foam\" (XPS)
988 Databases.materials.Quantumtubing = Quantum tubing
990 Databases.materials.Ripstopnylon = Ripstop nylon
991 Databases.materials.Mylar = Mylar
992 Databases.materials.Polyethylenethin = Polyethylene (thin)
993 Databases.materials.Polyethyleneheavy = Polyethylene (heavy)
994 Databases.materials.Silk = Silk
995 Databases.materials.Paperoffice = Paper (office)
996 Databases.materials.Cellophane = Cellophane
997 Databases.materials.Crepepaper = Cr\u00eape paper
999 Databases.materials.Threadheavy-duty = Thread (heavy-duty)
1000 Databases.materials.Elasticcordround2mm = Elastic cord (round 2mm, 1/16 in)
1001 Databases.materials.Elasticcordflat6mm = Elastic cord (flat 6mm, 1/4 in)
1002 Databases.materials.Elasticcordflat12mm = Elastic cord (flat 12mm, 1/2 in)
1003 Databases.materials.Elasticcordflat19mm = Elastic cord (flat 19mm, 3/4 in)
1004 Databases.materials.Elasticcordflat25mm = Elastic cord (flat 25mm, 1 in)
1005 Databases.materials.Braidednylon2mm = Braided nylon (2 mm, 1/16 in)
1006 Databases.materials.Braidednylon3mm = Braided nylon (3 mm, 1/8 in)
1007 Databases.materials.Tubularnylon11mm = Tubular nylon (11 mm, 7/16 in)
1008 Databases.materials.Tubularnylon14mm = Tubular nylon (14 mm, 9/16 in)
1009 Databases.materials.Tubularnylon25mm = Tubular nylon (25 mm, 1 in)
1012 ExternalComponent.Rough = Rough
1013 ExternalComponent.Unfinished = Unfinished
1014 ExternalComponent.Regularpaint = Regular paint
1015 ExternalComponent.Smoothpaint = Smooth paint
1016 ExternalComponent.Polished = Polished
1019 LineStyle.Solid = Solid
1020 LineStyle.Dashed = Dashed
1021 LineStyle.Dotted = Dotted
1022 LineStyle.Dash-dotted = Dash-dotted
1023 LineStyle.Defaultstyle = Default style
1026 Shape.Conical = Conical
1027 Shape.Conical.desc1 = A conical nose cone has a profile of a triangle.
1028 Shape.Conical.desc2 = A conical transition has straight sides.
1030 Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube, values less than 1 produce <b>secant ogives</b>.
1031 Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube at the aft end, values less than 1 produce <b>secant ogives</b>.
1032 Shape.Ellipsoid = Ellipsoid
1033 Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>.
1034 Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
1035 Shape.Powerseries = Power series
1036 Shape.Powerseries.desc1 = A power series nose cone has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 this is a <b>\u00BD-power</b> or <b>parabolic</b> nose cone, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 a <b>conical</b> nose cone.
1037 Shape.Powerseries.desc2 = A power series transition has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 the transition is <b>\u00BD-power</b> or <b>parabolic</b>, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 <b>conical</b>.
1038 Shape.Parabolicseries = Parabolic series
1039 Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> nose cone.
1040 Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube at the aft end, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> transition.
1041 Shape.Haackseries = Haack series
1042 Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an <b>LV-Haack</b> nose cone, which minimizes drag for fixed length and volume.
1043 Shape.Haackseries.desc2 = The Haack series <i>nose cones</i> are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> shape, while a value of 0.333 produces an <b>LV-Haack</b> shape.
1047 RocketComponent.Position.TOP = Top of the parent component
1048 RocketComponent.Position.MIDDLE = Middle of the parent component
1049 RocketComponent.Position.BOTTOM = Bottom of the parent component
1050 RocketComponent.Position.AFTER = After the parent component
1051 RocketComponent.Position.ABSOLUTE = Tip of the nose cone
1054 LaunchLug.Launchlug = Launch lug
1056 NoseCone.NoseCone = Nose cone
1058 Transition.Transition = Transition
1062 BodyTube.BodyTube = Body tube
1064 TubeCoupler.TubeCoupler = Tube coupler
1066 InnerTube.InnerTube = Inner Tube
1068 TrapezoidFinSet.TrapezoidFinSet = Trapezoidal fin set
1070 FreeformFinSet.FreeformFinSet = Freeform fin set
1072 MassComponent.MassComponent = Mass component
1074 Parachute.Parachute = Parachute
1076 ShockCord.ShockCord = Shock cord
1078 Bulkhead.Bulkhead = Bulkhead
1081 Rocket.motorCount.Nomotor = [No motors]
1082 Rocket.compname.Rocket = Rocket
1085 MotorMount.IgnitionEvent.AUTOMATIC = Automatic (launch or ejection charge)
1086 MotorMount.IgnitionEvent.LAUNCH = Launch
1087 MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous stage
1088 MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage
1089 MotorMount.IgnitionEvent.NEVER = Never
1092 ComponentIcons.Nosecone = Nose cone
1093 ComponentIcons.Bodytube = Body tube
1094 ComponentIcons.Transition = Transition
1095 ComponentIcons.Trapezoidalfinset = Trapezoidal fin set
1096 ComponentIcons.Ellipticalfinset = Elliptical fin set
1097 ComponentIcons.Freeformfinset = Freeform fin set
1098 ComponentIcons.Launchlug = Launch lug
1099 ComponentIcons.Innertube = Inner tube
1100 ComponentIcons.Tubecoupler = Tube coupler
1101 ComponentIcons.Centeringring = Centering ring
1102 ComponentIcons.Bulkhead = Bulk head
1103 ComponentIcons.Engineblock = Engine block
1104 ComponentIcons.Parachute = Parachute
1105 ComponentIcons.Streamer = Streamer
1106 ComponentIcons.Shockcord = Shock cord
1107 ComponentIcons.Masscomponent = Mass component
1108 ComponentIcons.disabled = (disabled)
1111 StageAction.Stage = Stage
1114 RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds)
1115 RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage
1116 RecoveryDevice.DeployEvent.APOGEE = Apogee
1117 RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent
1118 RecoveryDevice.DeployEvent.NEVER = Never
1121 FlightEvent.Type.LAUNCH = Launch
1122 FlightEvent.Type.IGNITION = Motor ignition
1123 FlightEvent.Type.LIFTOFF = Lift-off
1124 FlightEvent.Type.LAUNCHROD = Launch rod clearance
1125 FlightEvent.Type.BURNOUT = Motor burnout
1126 FlightEvent.Type.EJECTION_CHARGE = Ejection charge
1127 FlightEvent.Type.STAGE_SEPARATION = Stage separation
1128 FlightEvent.Type.APOGEE = Apogee
1129 FlightEvent.Type.RECOVERY_DEVICE_DEPLOYMENT = Recovery device deployment
1130 FlightEvent.Type.GROUND_HIT = Ground hit
1131 FlightEvent.Type.SIMULATION_END = Simulation end
1132 FlightEvent.Type.ALTITUDE = Altitude change
1134 ! ThrustCurveMotorColumns
1135 TCurveMotorCol.MANUFACTURER = Manufacturer
1136 TCurveMotorCol.DESIGNATION = Designation
1137 TCurveMotorCol.TYPE = Type
1138 TCurveMotorCol.DIAMETER = Diameter
1139 TCurveMotorCol.LENGTH = Length
1142 RocketInfo.lengthLine.Length = Length
1143 RocketInfo.lengthLine.maxdiameter = , max. diameter
1144 RocketInfo.massText1 = Mass with motors
1145 RocketInfo.massText2 = Mass with no motors
1146 RocketInfo.at = at M=
1147 RocketInfo.cgText = CG:
1148 RocketInfo.cpText = CP:
1149 RocketInfo.stabText = Stability:
1150 RocketInfo.Warning = Warning:
1151 RocketInfo.Calculating = Calculating...
1152 RocketInfo.Apogee = Apogee:
1153 RocketInfo.Maxvelocity = Max. velocity:
1154 RocketInfo.Maxacceleration = Max. acceleration:
1155 RocketInfo.apogeeValue = N/A
1156 RocketInfo.Mach = (Mach
1157 RocketInfo.velocityValue = N/A
1158 RocketInfo.accelerationValue = N/A
1161 FinSet.CrossSection.SQUARE = Square
1162 FinSet.CrossSection.ROUNDED = Rounded
1163 FinSet.CrossSection.AIRFOIL = Airfoil
1164 FinSet.TabRelativePosition.FRONT = Root chord leading edge
1165 FinSet.TabRelativePosition.CENTER = Root chord midpoint
1166 FinSet.TabRelativePosition.END = Root chord trailing edge
1169 FlightDataType.TYPE_TIME = Time
1170 FlightDataType.TYPE_ALTITUDE = Altitude
1171 FlightDataType.TYPE_VELOCITY_Z = Vertical velocity
1172 FlightDataType.TYPE_ACCELERATION_Z = Vertical acceleration
1173 FlightDataType.TYPE_VELOCITY_TOTAL = Total velocity
1174 FlightDataType.TYPE_ACCELERATION_TOTAL = Total acceleration
1175 FlightDataType.TYPE_POSITION_X = Position upwind
1176 FlightDataType.TYPE_POSITION_Y = Position parallel to wind
1177 FlightDataType.TYPE_POSITION_XY = Lateral distance
1178 FlightDataType.TYPE_POSITION_DIRECTION = Lateral direction
1179 FlightDataType.TYPE_VELOCITY_XY = Lateral velocity
1180 FlightDataType.TYPE_ACCELERATION_XY = Lateral acceleration
1181 FlightDataType.TYPE_AOA = Angle of attack
1182 FlightDataType.TYPE_ROLL_RATE = Roll rate
1183 FlightDataType.TYPE_PITCH_RATE = Pitch rate
1184 FlightDataType.TYPE_YAW_RATE = Yaw rate
1185 FlightDataType.TYPE_MASS = Mass
1186 FlightDataType.TYPE_LONGITUDINAL_INERTIA = Longitudinal moment of inertia
1187 FlightDataType.TYPE_ROTATIONAL_INERTIA = Rotational moment of inertia
1188 FlightDataType.TYPE_CP_LOCATION = CP location
1189 FlightDataType.TYPE_CG_LOCATION = CG location
1190 FlightDataType.TYPE_STABILITY = Stability margin calibers
1191 FlightDataType.TYPE_MACH_NUMBER = Mach number
1192 FlightDataType.TYPE_REYNOLDS_NUMBER = Reynolds number
1193 FlightDataType.TYPE_THRUST_FORCE = Thrust
1194 FlightDataType.TYPE_DRAG_FORCE = Drag force
1195 FlightDataType.TYPE_DRAG_COEFF = Drag coefficient
1196 FlightDataType.TYPE_AXIAL_DRAG_COEFF = Axial drag coefficient
1197 FlightDataType.TYPE_FRICTION_DRAG_COEFF = Friction drag coefficient
1198 FlightDataType.TYPE_PRESSURE_DRAG_COEFF = Pressure drag coefficient
1199 FlightDataType.TYPE_BASE_DRAG_COEFF = Base drag coefficient
1200 FlightDataType.TYPE_NORMAL_FORCE_COEFF = Normal force coefficient
1201 FlightDataType.TYPE_PITCH_MOMENT_COEFF = Pitch moment coefficient
1202 FlightDataType.TYPE_YAW_MOMENT_COEFF = Yaw moment coefficient
1203 FlightDataType.TYPE_SIDE_FORCE_COEFF = Side force coefficient
1204 FlightDataType.TYPE_ROLL_MOMENT_COEFF = Roll moment coefficient
1205 FlightDataType.TYPE_ROLL_FORCING_COEFF = Roll forcing coefficient
1206 FlightDataType.TYPE_ROLL_DAMPING_COEFF = Roll damping coefficient
1207 FlightDataType.TYPE_PITCH_DAMPING_MOMENT_COEFF = Pitch damping coefficient
1208 FlightDataType.TYPE_YAW_DAMPING_MOMENT_COEFF = Yaw damping coefficient
1209 FlightDataType.TYPE_REFERENCE_LENGTH = Reference lenght
1210 FlightDataType.TYPE_REFERENCE_AREA = Reference area
1211 FlightDataType.TYPE_ORIENTATION_THETA = Vertical orientation (zenith)
1212 FlightDataType.TYPE_ORIENTATION_PHI = Lateral orientation (azimuth)
1213 FlightDataType.TYPE_WIND_VELOCITY = Wind velocity
1214 FlightDataType.TYPE_AIR_TEMPERATURE = Air temperature
1215 FlightDataType.TYPE_AIR_PRESSURE = Air pressure
1216 FlightDataType.TYPE_SPEED_OF_SOUND = Speed of sound
1217 FlightDataType.TYPE_TIME_STEP = Simulation time step
1218 FlightDataType.TYPE_COMPUTATION_TIME = Computation time
1221 PlotConfiguration.Verticalmotion = Vertical motion vs. time
1222 PlotConfiguration.Totalmotion = Total motion vs. time
1223 PlotConfiguration.Flightside = Flight side profile
1224 PlotConfiguration.Stability = Stability vs. time
1225 PlotConfiguration.Dragcoef = Drag coefficients vs. Mach number
1226 PlotConfiguration.Rollcharacteristics = Roll characteristics
1227 PlotConfiguration.Angleofattack = Angle of attack and orientation vs. time
1228 PlotConfiguration.Simulationtime = Simulation time step and computation time
1231 Warning.LargeAOA.str1 = Large angle of attack encountered.
1232 Warning.LargeAOA.str2 = Large angle of attack encountered (
1233 Warning.DISCONTINUITY = Discontinuity in rocket body diameter.
1234 Warning.THICK_FIN = Thick fins may not be modeled accurately.
1235 Warning.JAGGED_EDGED_FIN = Jagged-edged fin predictions may be inaccurate.
1236 Warning.LISTENERS_AFFECTED = Listeners modified the flight simulation
1237 Warning.RECOVERY_DEPLOYMENT_WHILE_BURNING = Recovery device opened while motor still burning.
1238 Warning.FILE_INVALID_PARAMETER = Invalid parameter encountered, ignoring.
1242 ScaleDialog.lbl.scaleRocket = Entire rocket
1243 ScaleDialog.lbl.scaleSubselection = Selection and all subcomponents
1244 ScaleDialog.lbl.scaleSelection = Only selected component
1245 ScaleDialog.title = Scale design
1246 ScaleDialog.lbl.scale = Scale:
1247 ScaleDialog.lbl.scale.ttip = Select whether to scale the entire design or only the selected component
1248 ScaleDialog.lbl.scaling = Scaling to apply:
1249 ScaleDialog.lbl.scaling.ttip = Resulting size, values above 100% grow and values below 100% shrink the design.
1250 ! The scaleFrom/scaleTo pair creates a phrase "Scale from [...] to [...]"
1251 ScaleDialog.lbl.scaleFrom = Scale from
1252 ScaleDialog.lbl.scaleTo = to
1253 ScaleDialog.lbl.scaleFromTo.ttip = Define the scaling based on an original and resulting length.
1254 ScaleDialog.checkbox.scaleMass = Update explicit mass values
1255 ScaleDialog.checkbox.scaleMass.ttip = Scale mass component and override mass values by the cube of the scaling factor
1256 ScaleDialog.button.scale = Scale
1263 OpenRocketPrintable.Partsdetail = Parts detail
1264 OpenRocketPrintable.Fintemplates = Fin templates
1265 OpenRocketPrintable.DesignReport = Design Report
1267 OpenRocketDocument.Redo = Redo
1268 OpenRocketDocument.Undo = Undo
1271 EllipticalFinSet.Ellipticalfinset = Elliptical fin set
1277 optimization.modifier.nosecone.length = Nose cone length
1278 optimization.modifier.nosecone.diameter = Nose cone diameter
1279 optimization.modifier.nosecone.thickness = Nose cone thickness
1281 optimization.modifier.transition.length = Transition length
1282 optimization.modifier.transition.forediameter = Transition fore diameter
1283 optimization.modifier.transition.aftdiameter = Transition aft diameter
1284 optimization.modifier.transition.thickness = Transition thickness
1286 optimization.modifier.bodytube.length = Body tube length
1287 optimization.modifier.bodytube.outerDiameter = Body tube outer diameter
1288 optimization.modifier.bodytube.innerDiameter = Body tube inner diameter
1289 optimization.modifier.bodytube.thickness = Body tube thickness
projects / debian / openrocket / blob