3 ###################################################
5 ###################################################
8 <name>USRP Dual Sink</name>
9 <key>usrp_dual_sink_x</key>
10 <import>from grc_gnuradio import usrp as grc_usrp</import>
11 <make>grc_usrp.dual_sink_$(type.fcn)(
13 frequency_a=$frequency_a,
14 frequency_b=$frequency_b,
15 interpolation=$interpolation,
23 <callback>set_interp_rate($interpolation)</callback>
24 <callback>set_frequency_a($frequency_a)</callback>
25 <callback>set_gain_a($gain_a)</callback>
26 <callback>set_frequency_b($frequency_b)</callback>
27 <callback>set_gain_b($gain_b)</callback>
29 <name>Input Type</name>
44 <name>Unit Number</name>
50 <name>Frequency A</name>
51 <key>frequency_a</key>
55 <name>Frequency B</name>
56 <key>frequency_b</key>
60 <name>Interpolation</name>
61 <key>interpolation</key>
99 <name>TX Enable A</name>
117 <name>TX Enable B</name>
143 The USRP sink inputs 128 Megasamples per second / interpolation.
145 --- Flex RF specific ---
146 The "Auto TR" and "TX Enable" settings are flex rf specific and should be left at "Ignore" unless this is a flex rf board.
148 If enabled, "Auto Transmit/Receive Switching" handles the preference for transmit packets vs receive packets. \
149 By default, "Auto TR" is disabled.
151 The "Transmit Enable" configures the transmitter to be on or off. \
152 Do not leave this unconfigured.