3 ###################################################
5 ###################################################
9 <key>usrp_simple_sink_x</key>
10 <import>from grc_gnuradio import usrp as grc_usrp</import>
11 <make>grc_usrp.simple_sink_$(type.fcn)(
13 subdev_spec=$subdev_spec,
15 interpolation=$interpolation,
17 #if $mux.eval == hex(0)
25 <callback>set_interp_rate($interpolation)</callback>
26 <callback>set_frequency($frequency)</callback>
27 <callback>set_gain($gain)</callback>
29 <name>Input Type</name>
44 <name>Unit Number</name>
50 <name>Subdev Spec</name>
51 <key>subdev_spec</key>
68 <name>Frequency</name>
73 <name>Interpolation</name>
74 <key>interpolation</key>
107 <name>TX Enable</name>
129 The USRP sink inputs 128 Megasamples per second / interpolation.
131 --- Flex RF specific ---
132 The "Auto TR" and "TX Enable" settings are flex rf specific and should be left at "Ignore" unless this is a flex rf board.
134 If enabled, "Auto Transmit/Receive Switching" handles the preference for transmit packets vs receive packets. \
135 By default, "Auto TR" is disabled.
137 The "Transmit Enable" configures the transmitter to be on or off. \
138 Do not leave this unconfigured.