1 dumpuser "martinea" # the user to run dumps under
2 inparallel 4 # maximum dumpers that will run in parallel (max 63)
3 # this maximum can be increased at compile-time,
4 # modifying MAX_DUMPERS in server-src/driverio.h
6 dumporder "sssS" # specify the priority order of each dumper
11 # b -> smallest bandwidth
12 # B -> biggest bandwitdh
13 # try "BTBTBTBTBTBT" if you are not holding
16 taperalgo first # The algorithm used to choose which dump image to send
19 # Possible values: [first|firstfit|largest|largestfit|smallest|last]
22 # first First in - first out.
23 # firstfit The first dump image that will fit on the current tape.
24 # largest The largest dump image.
25 # largestfit The largest dump image that will fit on the current tape.
26 # smallest The smallest dump image.
27 # last Last in - first out.
28 displayunit "g" # Possible values: "k|m|g|t"
30 # The unit used to print many numbers.
31 # k=kilo, m=mega, g=giga, t=tera
32 netusage 8000 Kbps # maximum net bandwidth for Amanda, in KB per sec
34 bumpsize 20 Mb # minimum savings (threshold) to bump level 1 -> 2
35 bumppercent 20 # minimum savings (threshold) to bump level 1 -> 2
36 bumpdays 1 # minimum days at each level
38 # By default, Amanda can only track at most one run per calendar day. When
39 # the usetimestamps option is enabled, however, Amanda can track as many
40 # runs as you care to make.
41 # WARNING: This option is not backward-compatible. Do not enable it if you
42 # intend to downgrade your server installation to any version
43 # earlier than Amanda 2.5.1
46 device_output_buffer_size 1280k
47 # amount of buffer space to use when writing to devices
49 # If you want Amanda to automatically label any non-Amanda tapes it
50 # encounters, uncomment the line below. Note that this will ERASE any
51 # non-Amanda tapes you may have, and may also ERASE any near-failing tapes.
53 ## label_new_tapes "DailySet1-%%%"
55 maxdumpsize -1 # Maximum total size the planner will schedule
56 # for a run (default: runtapes * tape_length) (kbytes).
57 amrecover_do_fsf yes # amrecover will call amrestore with the
58 # -f flag for faster positioning of the tape.
59 amrecover_check_label yes # amrecover will call amrestore with the
60 # -l flag to check the label.
61 bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
65 amrecover_changer "changer" # amrecover will use the changer if you restore
66 # from this device. It could be a string like 'changer' and amrecover will use your
67 # changer if you set your tape to 'changer' with 'setdevice changer' or via
68 # 'tapedev "changer"' in amanda-client.conf
73 # If amanda cannot find a tape on which to store backups, it will run
74 # as many backups as it can to the holding disks. In order to save
75 # space for unattended backups, by default, amanda will only perform
76 # incremental backups in this case, i.e., it will reserve 100% of the
77 # holding disk space for the so-called degraded mode backups.
78 # However, if you specify a different value for the `reserve'
79 # parameter, amanda will not degrade backups if they will fit in the
80 # non-reserved portion of the holding disk.
82 # reserve 30 # percent
83 # This means save at least 30% of the holding disk space for degraded
87 # if autoflush is set to yes, then amdump will schedule all dump on
88 # holding disks to be flush to tape during the run.
90 # Amanda needs a few Mb of diskspace for the log and debug files,
91 # as well as a database. This stuff can grow large, so the conf directory
92 # isn't usually appropriate. Some sites use /usr/local/var and some /usr/adm.
93 # Create an amanda directory under there. You need a separate infofile and
94 # logdir for each configuration, so create subdirectories for each conf and
95 # put the files there. Specify the locations below.
97 # Note that, although the keyword below is infofile, it is only so for
98 # historic reasons, since now it is supposed to be a directory (unless
99 # you have selected some database format other than the `text' default)
100 infofile "/etc/amanda/DailySet1/curinfo" # database DIRECTORY
101 logdir "/etc/amanda/DailySet1" # log directory
102 indexdir "/etc/amanda/DailySet1/index" # index directory
103 #tapelist "@CONFIG_DIR/DailySet1/tapelist" # list of used tapes
104 # tapelist is stored, by default, in the directory that contains amanda.conf
106 # Specify holding disks. These are used as a temporary staging area for
107 # dumps before they are written to tape and are recommended for most sites.
108 # The advantages include: tape drive is more likely to operate in streaming
109 # mode (which reduces tape and drive wear, reduces total dump time); multiple
110 # dumps can be done in parallel (which can dramatically reduce total dump time.
111 # The main disadvantage is that dumps on the holding disk need to be flushed
112 # (with amflush) to tape after an operating system crash or a tape failure.
113 # If no holding disks are specified then all dumps will be written directly
114 # to tape. If a dump is too big to fit on the holding disk than it will be
115 # written directly to tape. If more than one holding disk is specified then
116 # they will all be used based on activity and available space.
119 # comment "main holding disk"
120 # directory "/dumps/amanda" # where the holding disk is
121 # use -100 Mb # how much space can we use on it
122 # # a non-positive value means:
123 # # use all space but that value
124 # chunksize 1Gb # size of chunk if you want big dump to be
125 # # dumped on multiple files on holding disks
126 # # N Kb/Mb/Gb split images in chunks of size N
127 # # The maximum value should be
128 # # (MAX_FILE_SIZE - 1Mb)
129 # # 0 same as INT_MAX bytes
132 # directory "/dumps2/amanda"
138 # These are referred to by the disklist file. They define the attributes
139 # of the network interface that the remote machine is accessed through.
140 # Notes: - netusage above defines the attributes t
141 # disklist entry doesn't specify otherwise.
142 # - the values below are only samples.
143 # - specifying an interface does not force the traffic to pass
144 # through that interface. Your OS routing tables do that. This
145 # is just a mechanism to stop Amanda trashing your network.
147 # use - bandwidth above which amanda won't start
148 # backups using this interface. Note that if
149 # a single backup will take more than that,
150 # amanda won't try to make it run slower!
152 define interface local {
153 comment "a local disk"
157 #define interface le0 {
158 # comment "10 Mbps ethernet"