1 ######################################################################
3 # Site dependend configuration. Please edit this file for your
4 # local site and place it in $prefix/share or $prefix/etc.
6 # For those options that need to replace the default configuration,
7 # remove the beginning # at beginning of the line and set the
8 # options to how you like it.
10 # These options can also be set on the command line for the configure
11 # script. The appropriate option for the option is listed along with
14 ######################################################################
16 # These are the directories for the Amanda programs and files.
18 # Let $prefix be the location of the root Amanda directory, commonly
19 # /usr/local or /opt/amanda. $prefix is set by using configure --prefix=.
20 # Other directories are setable:
21 # $prefix --prefix= Default:/usr/local
22 # $exec_prefix --exec-prefix= Default:$prefix
23 # $sbindir --sbindir= Default:$exec_prefix/sbin
24 # $libexecdir --libexecdir= Default:$exec_prefix/libexec
25 # $libdir --libdir= Default:$exec_prefix/lib
26 # $sysconfdir --sysconfdir= Default:$prefix/etc
27 # $localstatedir --localstatedir= Default:$prefix/var
28 # $mandir --mandir= Default:$prefix/man
30 # sbindir --sbindir=DIR
31 # Default: $exec_prefix/sbin = /usr/local/sbin
32 # Directory containing the server side binaries.
33 # sbindir=/usr/local/sbin
36 # libexecdir --libexecdir=DIR
37 # Default: $exec_prefix/libexec = /usr/local/libexec
38 # Directory containing the client side binaries.
39 # libexecdir=/usr/local/lib/amanda
43 # Default: $exec_prefix/lib = /usr/local/lib
44 # Directory containing the amanda (shared) libraries.
45 # libdir=/usr/local/lib/amanda
49 # Default: $prefix/man = /usr/local/man
50 # Directory containing the manual pages.
54 # INCLUDE_DIRS --with-includes="DIR DIR ..."
56 # Non-standard directories where include files should
58 # INCLUDE_DIRS="/opt/gnu/readline/include /opt/gnu/gdbm/include"
61 # LIBRARY_DIRS --with-libraries="DIR DIR ..."
63 # Non-standard directories where libraries should
65 # LIBRARY_DIRS="/opt/gnu/readline/lib /opt/gnu/gdbm/lib"
68 # CONFIG_DIR --with-configdir=DIR
69 # Default: $sysconfdir/amanda = /usr/local/etc/amanda
70 # Directory where the runtime files are to be
71 # found. Amanda supports multiple
72 # configurations per site; these are contained
73 # in subdirectories of CONFIG_DIR.
74 # CONFIG_DIR=/usr/local/etc/amanda
77 # USE_VERSION_SUFFIXES --with-suffixes
79 # All the Amanda binaries will be installed with a
80 # version string appended to the command name, for
81 # example "amdump-2.3.0.4". You must then set up
82 # symlinks from "amdump" to the correct version of
83 # the binary, or use them with the version suffixes
85 # This is mostly useful when you want multiple
86 # versions online for testing purposes. I recommend
87 # it if you are doing a major version upgrade and
88 # wish to try out the new version in parallel with
90 # USE_VERSION_SUFFIXES=yes
93 # NO_SERVER_MODE --without-server
95 # if true, disables building server stuff.
96 # Note: setting NO_SERVER_MODE=true implies
97 # --without-restore, i.e. NO_RESTORE_MODE=true,
98 # and it is an error to try to force a mismatch
102 # NO_CLIENT_MODE --without-client
104 # if true, disables building client stuff.
105 # NO_CLIENT_MODE=true
108 # NO_RESTORE_MODE --without-restore
110 # if true, disables building amrestore and amidxtaped
111 # NO_RESTORE_MODE=true
114 # NO_RECOVER_MODE --without-amrecover
116 # if true, disables building amrecover.
117 # NO_RECOVER_MODE=true
120 # DEFAULT_SERVER --with-index-server=HOST
121 # Default: name of the machine configure is run on
122 # The default server for the index of files dumped
124 # DEFAULT_SERVER=kipuka
127 # FORCE_USERID --with-dont-force-uid
129 # FORCE_USERID controls whether or not the Amanda
130 # client-side should suid to a non-priveledged user
131 # when inetd runs it as root. Most older inetds do
132 # not allow you to specify which user to run a daemon
133 # as in inetd.conf; all daemons are just run as root.
134 # We prefer to not do anything as root that can be
135 # done as a normal user, so unless FORCE_USERID is set
136 # to no, Amanda will switch to the user specified by
137 # CLIENT_LOGIN for all further operations on the slave
138 # host. This type of operation normally requires that
139 # the CLIENT_LOGIN be in some group that has read
140 # permissions on the raw disk devices, and read/write
141 # permissions on /etc/dumpdates.
145 # CLIENT_LOGIN --with-user=USERNAME
146 # This flag *must* be specified
147 # The user to install as the owner of all Amanda
148 # programs and the user to switch to on client
150 # CLIENT_LOGIN=amanda
153 # SETUID_GROUP --with-group=GROUPNAME
154 # This flag *must* be specified
155 # The name of the group to install all files under.
159 # USE_RUNDUMP --with-rundump
160 # Default: no (unless xfsdump or vdump are found)
161 # Enables the usage of the rundump setuid-root
162 # program, that invokes dump as root.
166 # DEFAULT_CONFIG --with-config=CONFIG
168 # The default configuration name of the default
169 # dump set up. This gets used throughout the
170 # configuration of Amanda.
171 # DEFAULT_CONFIG=DailySet1
174 # DEFAULT_TAPE_SERVER --with-tape-server=TAPE_SERVER
175 # Default: DEFAULT_SERVER or [--with-index-server]
176 # This is the name of the machine which serves as the
177 # default machine to recover files from tape using
178 # amrecover. The default machine is the one used
179 # for DEFAULT_SERVER.
180 # DEFAULT_TAPE_SERVER=kipuka
183 # DEFAULT_TAPE_DEVICE --with-tape-device=TAPE_DEVICE
184 # Default: /dev/rmt/[0-9]bn or /dev/nrst[0-9]
185 # This sets the default no rewinding tape device. The
186 # configure script will search for the lowest numbered
187 # /dev/rmt/[0-9]bn device and if none exist, it will
188 # use the lowest numbered /dev/nrst[0-9] device. If
189 # no tape device is found, /dev/null is used.
191 # This is also the name of the no rewinding tape device
192 # on the the DEFAULT_TAPE_SERVER machine for
194 # DEFAULT_TAPE_DEVICE=/dev/rmt/0bn
195 # DEFAULT_TAPE_DEVICE=/dev/nrst0
198 # DEFAULT_CHANGER_DEVICE --with-changer-device=CHANGER_DEVICE
199 # Default: /dev/ch0 or /dev/null
200 # This sets the default tape changer device.
201 # If /dev/ch0 exists, it is used, otherwise, no
202 # changer device is defined.
203 # DEFAULT_CHANGER_DEVICE=/dev/ch0
206 # USE_FQDN --with-fqdn
208 # Allow Amanda to backup systems in different
209 # domains. This requires that the disklist file
210 # have the fully qualified domain names (FQDNs)
215 # SAMBA_CLIENT --with-smbclient=PROG
217 # Tell Amanda where to find the smbclient program,
218 # which does the backing up of Samba PC clients.
219 # Look in the patches/ directory for patches to
220 # apply to Samba for this to work properly.
221 # SAMBA_CLIENT=/usr/local/bin/smbclient
224 # GNUTAR --with-gnutar=PROG
225 # Default: look for program named gtar, gnutar or tar
226 # that prints GNU tar when run with --version.
227 # GNUTAR=/usr/local/bin/gnutar
229 # GNUTAR_LISTDIR --with-gnutar-listdir[=DIR]
230 # Default: $localstatedir/amanda/gnutar-lists =
231 # /usr/local/var/amanda/gnutar-lists
232 # This specifies the directory where gnutar should
233 # place the listed incrementals directory lists it
234 # uses to do incremental backups.
235 # GNUTAR_LISTDIR=/usr/local/var/amanda/gnutar-lists
239 # Default: system specific
240 # Define DEV_PREFIX is the configure script can not
241 # figure out the correct device prefix for the disk
247 # Default: system specific
248 # Define DEV_PREFIX is the configure script can not
249 # figure out the correct device prefix for the raw
251 # RDEV_PREFIX="/dev/r"
254 # BSD_SECURITY --without-bsd-security
256 # BSD_SECURITY selects BSD rsh/rlogin style security,
257 # which is not great, but is in common use, and its
258 # strengths and weaknesses are well known. Under
259 # BSD_SECURITY, the Amanda backup client hosts will
260 # check .rhosts (or .amandahosts, see below)
261 # files before sending any dump data.
265 # USE_AMANDAHOSTS --without-amandahosts
267 # When BSD_SECURITY is used, by default it will use
268 # the .amandahosts file to make sure that the remote
269 # user can tell the Amanda client what to do. If you
270 # wish to use the more standard .rhosts and
271 # /etc/hosts.equiv files instead, then define this to
272 # no. Unlike .rhosts, .amandahosts cannot contain
273 # lines with hostnames only; the username must always
278 # PORTRANGE --with-portrange=min,max
280 # Limits the range of ports that TCP server
281 # sockets will be bound to. It does not affect
282 # reserved (<1024) ports, though. This is useful
283 # for backing up hosts behind firewalls: they can
284 # be configured to use this limited range of
285 # ports for data, message and index connections.
286 # PORTRANGE=50000,50100
289 # UDPPORTRANGE --with-udpportrange=min,max
291 # Limits the range of ports that UDP sockets
292 # will be bound to. This one *does* affect
293 # reserved (<1024) ports, except those handed to
294 # amandad by inetd, of course. This is useful
295 # for backing up hosts behind firewalls: they can
296 # be configured to use this limited range of
297 # ports for requests.
298 # UDPPORTRANGE=512,520
301 # KRB4_SECURITY --with-krb4-security
303 # KRB4_SECURITY selects MIT Kerberos version 4 style
304 # security, which is significantly better than
305 # BSD_SECURITY, providing for mutual authentication
306 # and (optionally) encryption of backup data over the
307 # network. Both BSD_SECURITY and KRB4_SECURITY may be
308 # defined at the same time: the type of security to be
309 # used can be selected on a per-client-host basis (in
310 # the disklist file).
311 # NOTE: Due to stupid USA export restrictions, use of
312 # KRB4_SECURITY requires source files from the separate
313 # "amanda-krb4" package. See the KERBEROS.HOW-TO-GET
314 # instructions on the Amanda home ftp site,
318 # If you turn on KRB4_SECURITY, you must set all these options below.
320 # You can set the principle, instance, and keyfile to use seperately for
321 # both the client and server.
323 # The instance can either be a string constant, or `HOSTNAME_INSTANCE' if
324 # you want the local hostname used as the instance (ala krb_get_phost).
326 # The keyfile name can be either a string constant, or `KEYFILE' to use the
327 # default keyfile defined in <krb.h>.
328 # SERVER_HOST_PRINCIPLE="amanda"
329 # SERVER_HOST_INSTANCE="amanda"
330 # SERVER_HOST_KEY_FILE="/.amanda"
331 # CLIENT_HOST_PRINCIPAL="rcmd"
332 # CLIENT_HOST_INSTANCE=HOSTNAME_INSTANCE
333 # CLIENT_HOST_KEY_FILE=KEYFILE
334 # TICKET_LIFETIME=128
337 # DB_STYLE --with-db={text,db,dbm,gdbm,ndbm}
339 # This allows the user to force Amanda to use a
340 # particular database library.
343 # FORCE_MMAP --with-mmap
345 # Force the use of mmap() instead of shared memory
350 # DUMPER_SOCKET_BUFFERIING --with-buffered-dump
352 # Dumping sockets are buffered in the server. This
353 # may improve dumping speed.
354 # DUMPER_SOCKET_BUFFERING=yes
357 # ASSERTIONS --with-assertions
359 # Turns on assertion checking, which makes Amanda a
360 # bit bigger and slower, but will help catch errors
365 # DEBUGGING --with-debugging
366 # Default: /tmp/amanda
367 # Turning off debugging prevents that each
368 # program saves a transcript of what it did to a
369 # file in /tmp/amanda for debugging purposes. An
370 # alternate directory can be specified too.
372 # DEBUGGING=/var/amanda/debug
374 # DEBUG_FILE_WITH_PID --with-pid-debug-files
376 # Have the Amanda debugging files that are placed
377 # in /tmp/amanda have the process ID appended to their
379 # DEBUG_FILE_WITH_PID=yes
382 # TESTING --with-testing[=suffix]
384 # Ues alternate service names so that a new
385 # version of amanda can be tested without preventing
386 # a production one from being run successfully.
387 # The used service names will have `-test' appended
388 # to the original names, i.e., service `amanda'
389 # will become `amanda-test'.
390 # If anything different from `n', `no', `y', `ye' or
391 # `yes' is specified as suffix, after the equal sign,
392 # this suffix will be appended to the service names
393 # after a hyphen, i.e., --with-testing=test2 will
394 # cause service `amanda-test2' to be used.
398 # USE_LIBTOOL --disable-libtool
400 # By default, libtool to create static/shared
401 # libraries. If USE_LIBTOOL is set to no, or
402 # --disable-libtool is specified, only static
403 # libraries will be created, and the libtool
404 # script will only be used to link and install
406 # A drawback of using libtool is that it will
407 # always install libraries, even static ones,
408 # which are not necessary for the execution of
409 # programs. The advantage of using libtool is
410 # that shared libraries may be created, which
414 # with_gnu_ld --with-gnu-ld
416 # Use GNU ld in order to build shared libraries
420 # libtool_shared --enable-shared
422 # Enable the creation of shared libraries
423 # libtool_shared=--disable-shared
426 # libtool_static --enable-static
428 # Enable the creation of static libraries
429 # libtool_static=--disable-static
433 ######################################################################